Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Material handling'
23 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Bulk Bag Unloader
Asset ID: BBU-108
Available: 1
Camcorp Bulk Bag Unloader Model BHU4000-H, 2000 pound bag capacity
Asset ID: BBU-108
Available: 1
Bulk Bag Unloader
Camcorp Bulk Bag Unloader Model BHU4000-H, 2000 pound bag capacity
Loadout arm
Asset ID: BD-1509
Available: 1
Loadout Arm by Emco Wheaton Size 3/4 Model E2313 with Viton Seals
Asset ID: BD-1509
Available: 1
Loadout arm
Loadout Arm by Emco Wheaton Size 3/4 Model E2313 with Viton Seals
Stainless Steel 55 Gallon Drums
Asset ID: 2051
Available: 16
55 gallon drums - stainless steel 304. 16 stainless barrels (drums) available. 2 drums are the ribbed style and 14 are smooth. The 16 lids (covers) have plugs. Please see photos.- some photos show smooth lids, but those are no longer available. Priced by the drum (minimum order 3 drums). Quantity (16) total. Pk6020
Asset ID: 2051
Available: 16
Stainless Steel 55 Gallon Drums
55 gallon drums - stainless steel 304. 16 stainless barrels (drums) available. 2 drums are the ribbed style and 14 are smooth. The 16 lids (covers) have plugs. Please see photos.- some photos show smooth lids, but those are no longer available. Priced by the drum (minimum order 3 drums)....
Compressor Oil Turbo
Asset ID: B2095
Available: 8
Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was Mar 26, 2021. New. Qty (8) - priced separately
Asset ID: B2095
Available: 8
Compressor Oil Turbo
Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was Mar 26, 2021. New. Qty (8) - priced separately
Compressor Oil Gas & Process
Asset ID: B2096
Available: 1
Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW 55 gallon drum. Only one barrel remaning.
Asset ID: B2096
Available: 1
Compressor Oil Gas & Process
Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW 55 gallon drum. Only one barrel remaning.
SS Skid on Rollers
Asset ID: V2240
Available: 4
Stainless steel 304 skid on heavy duty rollers, 4" square tubing. Approx size 7 ft x 10.5 ft x 1 ft tall. Qty (4) priced separately
Asset ID: V2240
Available: 4
SS Skid on Rollers
Stainless steel 304 skid on heavy duty rollers, 4" square tubing. Approx size 7 ft x 10.5 ft x 1 ft tall. Qty (4) priced separately
SS Skid on Rollers
Asset ID: V2242
Available: 2
Stainless steel 304 skid on heavy duty rollers, 4" square tubing. Approx size 80 inches x 10.5 ft x 1 ft tall
Asset ID: V2242
Available: 2
SS Skid on Rollers
Stainless steel 304 skid on heavy duty rollers, 4" square tubing. Approx size 80 inches x 10.5 ft x 1 ft tall
Truck Axle Weigh Scale
Asset ID: 8572
Available: 1
### Portable Truck Axle Weigh Scales ###
Walz weigh pads (2) plus M6-A indicator panel. Axle Scale Features:
- 60,000 lb+ axle capacity axle scale
- Pad dimensions: 31.5" X 17"
- Quality, durable aluminum construction
- Water resistant design
Asset ID: 8572
Available: 1
Truck Axle Weigh Scale
### Portable Truck Axle Weigh Scales ### Walz weigh pads (2) plus M6-A indicator panel. Axle Scale Features: - 60,000 lb+ axle capacity axle scale - Pad dimensions: 31.5" X 17" - Quality, durable aluminum construction - Water resistant design
Pin Mill Impact Mill
Asset ID: M2002
Available: 1
### Pin Mill - Centrifugal Impact Mill ###
Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460 V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial number 504.
The Simpactor® pin mill is a centrifugal impact mill that reduces low to medium density materials to uniform, fine particle sizes of 50-325mesh.The Simpactor® is used in milling applications where low maintenance and low wear are critical. Typical Simpactor® milling applications include food product processing such as corn fractionation, flours, starch densification, corn slurry, sugar and sweeteners. Semi-abrasive material applications including aluminum sulfate, fertilizer, gypsum, soda ash, deagglomerate powders including tungsten), talc, clay and kaolin
Asset ID: M2002
Available: 1
Pin Mill Impact Mill
### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge....
Pin Mill Impact Mill
Asset ID: M2003
Available: 1
### Pin Mill - Centrifugal Impact Mill ###
Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460 V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial number 703.
The Simpactor® pin mill is a centrifugal impact mill that reduces low to medium density materials to uniform, fine particle sizes of 50-325mesh.The Simpactor® is used in milling applications where low maintenance and low wear are critical. Typical Simpactor® milling applications include food product processing such as corn fractionation, flours, starch densification, corn slurry, sugar and sweeteners. Semi-abrasive material applications including aluminum sulfate, fertilizer, gypsum, soda ash, deagglomerate powders including tungsten), talc, clay and kaolin
Asset ID: M2003
Available: 1
Pin Mill Impact Mill
### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge....
Hammermill 75HP
Asset ID: P130
Available: 1
Hammermill model SFSP112x30. Capacity 4.5-9 ton/hr. Rotor dia 1080mm, body width 300mm. Main shaft speed 1480 rpm. Hammers 4x8 = 32. Overall size 1741L x 1360w x 1550H mm, weight 1340 kg. 55kw (75HP),460V , 60Hz, IP54
Asset ID: P130
Available: 1
Hammermill 75HP
Hammermill model SFSP112x30. Capacity 4.5-9 ton/hr. Rotor dia 1080mm, body width 300mm. Main shaft speed 1480 rpm. Hammers 4x8 = 32. Overall size 1741L x 1360w x 1550H mm, weight 1340 kg. 55kw (75HP),460V , 60Hz, IP54
Wood Grinder
Asset ID: 7444
Available: 1
## Wood Grinder ##
Arasmith MFG. Co. - Service No. 34.30.HH.1517.596 14.HT.2ADW/8 HAS2
- Infeed opening 30" x 18"
- Powered by 100 HP Lincoln AC Motor, TEFC Energy Efficient, RPM 1765, Frame 405T, Volts 230/460, Amps 226/113, 3 Phase, 60 Hz
- Safety switches on all guards and doors to shut the machine off and not allow to turn on when guards or inspection doors are opened.
- Wood Grinder has been reconditioned and owner says it is in great working condition. Customer will have to make that decision. We are selling As Is Where Is.
- This grinder was being used to make mulch.
Asset ID: 7444
Available: 1
Wood Grinder
## Wood Grinder ## Arasmith MFG. Co. - Service No....
Fine Grind Air Swept Mill
Asset ID: 2037
Available: 1
Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010. Driven by 400 HP motor 3/60/460v 1790 rpm. **Comes with 400 HP soft start**
Asset ID: 2037
Available: 1
Fine Grind Air Swept Mill
Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010....
Chain Hoist 10 Ton
Asset ID: B2074
Available: 1
Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high
Asset ID: B2074
Available: 1
Chain Hoist 10 Ton
Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high
Multi-Head Weigher
Asset ID: 8812
Available: 1
### Multi-head Weigher ###
Model RS10 used for high-speed particulates. Proprietary hopper / feeder design eliminates flow control variables. Weigh mode retained with each program - switch from grams to pounds to ounces, etc. at the touch of a key. Includes all linear plates, feed buckets, weigh buckets and funnel plates.
Specifications:
* Resolution: 1 /100 oz. (1 /10 gram)
* Capacity: 1 lb. (500 gram) standard to 5 lb. (2.5 kg) optional
* Hopper size: 1.75 cubic feet (50 liters) standard to 12 cu. feet (340 liters) optional
* Electrical: 220 volt, single phase, 1 amp, 60 hertz
* Air requirements: 60 psi, less than 1 /10 cfm
* Speed: 10 - 18 cycles per lane per minute at 2/10% (.2%) accuracy
Asset ID: 8812
Available: 1
Multi-Head Weigher
### Multi-head Weigher ### Model RS10 used for high-speed particulates. Proprietary hopper / feeder design eliminates flow control variables. Weigh mode retained with each program - switch from grams to pounds to ounces, etc. at the touch of a key....
Weigh Scale and Belt Conveyor
Asset ID: P0102
Available: 1
Weigh scale belt mounted. Ramsey model XR-125. Designed for soybean at density 0.72 t/m3, flow rate 50 T/H. Belt width 600mm, motor 1.1kw. 2.2kw (3HP), 460V,60Hz. IP54. Idle since 2006
Asset ID: P0102
Available: 1
Weigh Scale and Belt Conveyor
Weigh scale belt mounted. Ramsey model XR-125. Designed for soybean at density 0.72 t/m3, flow rate 50 T/H. Belt width 600mm, motor 1.1kw. 2.2kw (3HP), 460V,60Hz. IP54. Idle since 2006
Base with Load Cells
Asset ID: AF3
Available: 1
Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N. See dataweigh.com and brochure in Links.
Asset ID: AF3
Available: 1
Base with Load Cells
Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N....
Hopper 590cf
Asset ID: AF7
Available: 1
Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft. Has bin vibrators on side and VibraRod vibratory level sensor on top. Closed top with approx 18" round inlet to accept drop from conveyor or feed.
Asset ID: AF7
Available: 1
Hopper 590cf
Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft....
Hopper 350 cu ft with auger
Asset ID: 8852
Available: 1
## Hopper with Auger ##
**Hopper:** NEW, open top hopper on legs, carbon steel. Size is 126” w x 77” long x 144” OAH. Capacity approx 350 cu ft. Hopper has 60 degree taper at bottom to an internal screw driven by 1 HP vertical gearmotor. and dropping into an external drag conveyor approximately 12 ft long driven by a 1 HP vertical gear motor. Has end opening square manhead. Built in 2022, NEW, never used. Has been in weather so would need to be blasted and painted.
**Screw Conveyor:** Includes Screw Conveyor (auger): Screw conveyor 5.25” dia x 17 ft long, belt driven by 3 HP motor 230/460v 3/60 at 1760 rpm and Dodge speed reducer ratio 14.91:1 (final rpm 62. Manufactured by Nordstrong. Designed for 18 cu ft/min (cfm) of product density 42 lb/cu ft. Conveyor designed for a 30 degree inclination.
**Hopper Stand**: Hopper structural steel stand with 4 Rice lake load cells. Carbon steel.
## Price incudes all 3 pieces ##
Asset ID: 8852
Available: 1
Hopper 350 cu ft with auger
## Hopper with Auger ## **Hopper:** NEW, open top hopper on legs, carbon steel. Size is 126” w x 77” long x 144” OAH. Capacity approx 350 cu ft. Hopper has 60 degree taper at bottom to an internal screw driven by 1 HP vertical gearmotor....
Hopper 100 cu ft sloped outlet
Asset ID: 8853
Available: 1
NEW, open top hopper square with 30 degree taper bottom to center, on legs including platform on one side. Size 53” w x 55” long x 72” OAH. Capacity approx 100 cu ft. On 4 Rice Lake load cells. Direct drive external screw conveyor approx. 3” dia x 10 ft long, driven by 1 HP motor 1145 rpm with Nord 33:1 gearbox. 460v 3/60.
Asset ID: 8853
Available: 1
Hopper 100 cu ft sloped outlet
NEW, open top hopper square with 30 degree taper bottom to center, on legs including platform on one side. Size 53” w x 55” long x 72” OAH. Capacity approx 100 cu ft. On 4 Rice Lake load cells. Direct drive external screw conveyor approx....
Plug Screw Feeder
Asset ID: B-1011
Available: 1
### Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder ###
**These units are NEW old stock, never used**
Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48%
Design flow rate 530 dry tons per day soft wood chips (500 BDST/D); Max capacity 1000 BDST/D; Turndown rate 50%
**Valmet plug screw feeder**
- Fed by a pre-compression screw section, and 48" shredder at outlet
- 850 HP Siemens motor 1750 rpm 460v 3/60
- Gear Reducer ratio 25:1. Nominal speed 69 rpm, range 35-105 rpm
- Skid size approx 25 ft long x 7 ft wide x 4.6 ft tall. Total weight including motor 45,400 lb
- Inlet 35.83" x 25.79"
**Pre-compression screw**
- Materials of construction stainless steel 304L for all contact parts
- Sits on top of plug screw at 90 degrees with s 24" diameter- top force feed
- Capacity Volume/Revolution inlet/discharge: 45 L / 22.5 L. Capacity / revolution at 110 kg/m3 = 5.46 BDST/D and net max capacity at 110 kg/m3 = 530 BDST/D
- 250 HP motor 1750 rpm 460v 3/60 v-belt drive to gear reducer V-belt reduction 1:52
- Gear reducer SEW Eurodrive ratio 18:1. Final rpm nominal speed 65 rpm, range 45-97 rpm
- Overall size approx 15.2 ft long x 7 ft wide x 5.8 ft tall, weight 17,300 lb
- Outlet: 35.83" x 25.79"
**T-Pipe 48" Shredder**
- Fed from plug screw feeder 24" biomass inlet
- MAWP 350 psig at 800F
- 100 HP motor 1750 rpm 460v 3/60
- Gear reducer 8.9:1 for nominal 197 rpm
- Shredder size approx 5 ft x 10.6 ft x 9.3 ft tall, weight 23,650 lb
- Outlet 24" flange 600#
**Condition** - These units are sealed against weather, protected, and in long term storage inside a third party protected warehouse. No known refurbishment required - assets are sold As Is Where Is.
Asset ID: B-1011
Available: 1
Plug Screw Feeder
### Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder ### **These units are NEW old stock, never used** Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48% Design flow rate 530 dry tons per day soft wood chips (500 BDST/D); Max capacity 1000 BDST....
Live Bottom Hopper (3)
Asset ID: 7896
Available: 3
### Live Bottom Hopper Receiving Pit Feeders ###
**New, Old Stock. Never Used**
Laidig 14' x 14' Multi-Screw (Auger) Receiving Pit System. (Three available-priced separately).
- (4) augers 24" dia in a common trough (allow for a 14' x 14' square pit opening in the floor above & 9' x 9' from centerline of pit to centerline of outlet, each driven by a 10HP motor 230/460V, 60Hz @ 1750RPM, TEFC with direct drive gearbox
- Anti-jam sensors and zero speed switch
- Support legs to concrete floor
Designed for
- Particle size 1/2" minus
- Bulk Density: 25 lb/cu ft
- Up to 75% moisture content
- Ambient operating temperature
- The hopper/receiving pit is designed to deliver 133 cubic feet/minute (100 tons/hr @ 25 PCF)
No control panels are included. We can supply control panels for additional. Three available- priced separately.
Asset ID: 7896
Available: 3
Live Bottom Hopper (3)
### Live Bottom Hopper Receiving Pit Feeders ### **New, Old Stock. Never Used** Laidig 14' x 14' Multi-Screw (Auger) Receiving Pit System. (Three available-priced separately)....
Loading Platform & Arm
Asset ID: 7387
Available: 1
Truck load out station and counterbalanced platform, double sided. Has drop down platform on both side with OPW arms for simultaneous loading of 2 trucks. Carbon steel with 45 degree stairway. Includes OPW counterbalanced 2 inch loading arm