Metering Bin Feeders Biomass

Asset ID: TS-9141

Available: 2

Metering bin feeder originally for coal and lime but can be used for other biomass material. Includes screw conveyor with 5 HP motor VFD 1200 rpm. Includes diverter and chutes at infeed, and stoker assembly. There are 2 of these - Priced for BOTH. Weight of each feeder is approx 20.475 pounds. Built 2007 - used very little in 2008, idled in 2009. The entire system is available, however, we will sell equipment individually. See Simplified Flow Chart in Links for a pictorial of each piece in this system. For a list of all components, enter PK9140 in the search box

Asset ID: TS-9141

Available: 2

Metering Bin Feeders Biomass

Metering bin feeder originally for coal and lime but can be used for other biomass material. Includes screw conveyor with 5 HP motor VFD 1200 rpm. Includes diverter and chutes at infeed, and stoker assembly. There are 2 of these - Priced for BOTH....

Cyclone 10' dia

Asset ID: CYVM-11

Available: 4

Cyclones approx 10 ft dia x 39 feet tall. There are (4) of these, priced separately - same design but two are opposite handed. Includes a header for a set of twor.

Asset ID: CYVM-11

Available: 4

Cyclone 10' dia

Cyclones approx 10 ft dia x 39 feet tall. There are (4) of these, priced separately - same design but two are opposite handed. Includes a header for a set of twor.

Preseparator

Asset ID: VK-2026

Available: 1

Preseparator 45" x 84". Overall Physical size approx 14' 4" wide x 18' 10" deep x 27' 4" tall. Weight 19,000 poundsr.

Asset ID: VK-2026

Available: 1

Preseparator

Preseparator 45" x 84". Overall Physical size approx 14' 4" wide x 18' 10" deep x 27' 4" tall. Weight 19,000 poundsr.

Stainless Steel 55 Gallon Drums

Asset ID: 2051

Available: 27

55 gallon drums - stainless steel 304. Approx 11 drums with reinforcing bands, and 16 drums without reinforcing band. Drums have lids. Specify which kind - priced by the drum (minimum order 3 drums). Quantity (27) total. Pk6020

Asset ID: 2051

Available: 27

Stainless Steel 55 Gallon Drums

55 gallon drums - stainless steel 304. Approx 11 drums with reinforcing bands, and 16 drums without reinforcing band. Drums have lids. Specify which kind - priced by the drum (minimum order 3 drums). Quantity (27) total. Pk6020

Compressor Oil Turbo

Asset ID: B2095

Available: 8

Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was Mar 26, 2021. New. Qty (8) - priced separately

Asset ID: B2095

Available: 8

Compressor Oil Turbo

Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was Mar 26, 2021. New. Qty (8) - priced separately

Compressor Oil Gas & Process

Asset ID: B2096

Available: 1

Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW 55 gallon drum. Only one barrel remaning.

Asset ID: B2096

Available: 1

Compressor Oil Gas & Process

Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW 55 gallon drum. Only one barrel remaning.

Pin Mill Impact Mill

Asset ID: M2002

Available: 1

### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460 V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial number 504. The Simpactor® pin mill is a centrifugal impact mill that reduces low to medium density materials to uniform, fine particle sizes of 50-325mesh.The Simpactor® is used in milling applications where low maintenance and low wear are critical. Typical Simpactor® milling applications include food product processing such as corn fractionation, flours, starch densification, corn slurry, sugar and sweeteners. Semi-abrasive material applications including aluminum sulfate, fertilizer, gypsum, soda ash, deagglomerate powders including tungsten), talc, clay and kaolin

Asset ID: M2002

Available: 1

Pin Mill Impact Mill

### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge....

Pin Mill Impact Mill

Asset ID: M2003

Available: 1

### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460 V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial number 703. The Simpactor® pin mill is a centrifugal impact mill that reduces low to medium density materials to uniform, fine particle sizes of 50-325mesh.The Simpactor® is used in milling applications where low maintenance and low wear are critical. Typical Simpactor® milling applications include food product processing such as corn fractionation, flours, starch densification, corn slurry, sugar and sweeteners. Semi-abrasive material applications including aluminum sulfate, fertilizer, gypsum, soda ash, deagglomerate powders including tungsten), talc, clay and kaolin

Asset ID: M2003

Available: 1

Pin Mill Impact Mill

### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge....

Grinding Mill

Asset ID: 7770

Available: 1

Used Sweco model M60MS Vibro-Energy grinding mill. 62" diameter X 3' high grinding chamber with 316 stainless steel liner and solid 316 stainless steel cover. 2" product discharge. Heating or cooling panels between inner and outer shell. 10 HP, 3 phase, 60 cycle, 460 volt motor.

Asset ID: 7770

Available: 1

Grinding Mill

Used Sweco model M60MS Vibro-Energy grinding mill. 62" diameter X 3' high grinding chamber with 316 stainless steel liner and solid 316 stainless steel cover. 2" product discharge. Heating or cooling panels between inner and outer shell. 10 HP, 3 phase, 60 cycle, 460 volt motor.

Fine Grind Air Swept Mill

Asset ID: 2037

Available: 1

Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010. Driven by 400 HP motor 3/60/460v 1790 rpm. **Comes with 400 HP soft start**

Asset ID: 2037

Available: 1

Fine Grind Air Swept Mill

Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010....

Wood Grinder

Asset ID: 7444

Available: 1

## Wood Grinder ## Arasmith MFG. Co. - Service No. 34.30.HH.1517.596 14.HT.2ADW/8 HAS2 - Infeed opening 30" x 18" - Powered by 100 HP Lincoln AC Motor, TEFC Energy Efficient, RPM 1765, Frame 405T, Volts 230/460, Amps 226/113, 3 Phase, 60 Hz - Safety switches on all guards and doors to shut the machine off and not allow to turn on when guards or inspection doors are opened. - Wood Grinder has been reconditioned and owner says it is in great working condition. Customer will have to make that decision. We are selling As Is Where Is. - This grinder was being used to make mulch.

Asset ID: 7444

Available: 1

Wood Grinder

## Wood Grinder ## Arasmith MFG. Co. - Service No....

Rotary Valve 30"

Asset ID: RV-5201

Available: 1

Rotary motor driven airlock valve by Rotolok. Size 30" x 30" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 18 rpm. Machine number 75RVSISA6B, Type 39577, ser num 52964. Used as RVAL-11 PreSeparator airlock.

Asset ID: RV-5201

Available: 1

Rotary Valve 30"

Rotary motor driven airlock valve by Rotolok. Size 30" x 30" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 18 rpm. Machine number 75RVSISA6B, Type 39577, ser num 52964....

Rotary Valve 24"

Asset ID: RV-5204

Available: 1

Rotary motor driven airlock valve by Rotolok. Size 24" x 24" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 25 rpm. Used as RVAL-13 under cyclone screw conveyor.

Asset ID: RV-5204

Available: 1

Rotary Valve 24"

Rotary motor driven airlock valve by Rotolok. Size 24" x 24" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 25 rpm. Used as RVAL-13 under cyclone screw conveyor.

Rotary Valve 18"

Asset ID: RV-5206

Available: 1

Rotary motor driven airlock valve by Rotolok. Size 18" x 18" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1.5 HP motor 460/3/60 at 24 rpm. Machine number 45RVSISA6B, ser num 52964. Used as RVAL-13 under fluid bed dryer.

Asset ID: RV-5206

Available: 1

Rotary Valve 18"

Rotary motor driven airlock valve by Rotolok. Size 18" x 18" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1.5 HP motor 460/3/60 at 24 rpm. Machine number 45RVSISA6B, ser num 52964. Used as RVAL-13 under fluid bed dryer.

Rotary Valve 14"

Asset ID: RV-5207

Available: 1

Rotary motor driven airlock valve by Rotolok. Size 14" x 14" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1 HP motor 460/3/60 at 29 rpm. Used as RVAL-32 under baghouse.

Asset ID: RV-5207

Available: 1

Rotary Valve 14"

Rotary motor driven airlock valve by Rotolok. Size 14" x 14" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1 HP motor 460/3/60 at 29 rpm. Used as RVAL-32 under baghouse.

Rotary Valve (2) 20"

Asset ID: RV-5202

Available: 2

Rotary motor driven airlock valve by Rotolok. Size 20" x 20" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 2 HP motor 460/3/60 at 25 rpm. Used as RVAL-12 A and RVAL-12B under cyclone screw conveyor. Quantity (2) priced separatelyr.

Asset ID: RV-5202

Available: 2

Rotary Valve (2) 20"

Rotary motor driven airlock valve by Rotolok. Size 20" x 20" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 2 HP motor 460/3/60 at 25 rpm. Used as RVAL-12 A and RVAL-12B under cyclone screw conveyor....

Hoist 5 ton

Asset ID: VK-1999

Available: 1

Harrington 5 ton chain hoist serial number 184897. Electric with pendant. Last inspected 5/31/2018. Used in wet grind. NOTE: This equipment is for sale but currently installed and not available until late 2023.

Asset ID: VK-1999

Available: 1

Hoist 5 ton

Harrington 5 ton chain hoist serial number 184897. Electric with pendant. Last inspected 5/31/2018. Used in wet grind. NOTE: This equipment is for sale but currently installed and not available until late 2023.

Hoist 10 ton

Asset ID: VK-2003

Available: 1

Harrington hoist, rated 10 ton. Model 70SY7644. Sn122450. Pendant control. Includes travel motor and hoist motor. Beam not included. Last inspected 5/31/2018. Used as east centrifuge hoist. NOTE: This equipment is for sale but currently installed and not available until late 2023.

Asset ID: VK-2003

Available: 1

Hoist 10 ton

Harrington hoist, rated 10 ton. Model 70SY7644. Sn122450. Pendant control. Includes travel motor and hoist motor. Beam not included. Last inspected 5/31/2018. Used as east centrifuge hoist. NOTE: This equipment is for sale but currently installed and not available until late 2023.

Lift Truck, Straddle Manual

Asset ID: B2069

Available: 1

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030327. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 88 x 44" x 84" high. Made specifically for Siemens products.

Asset ID: B2069

Available: 1

Lift Truck, Straddle Manual

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030327. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 88 x 44" x 84" high. Made specifically for Siemens products.

Lift Truck, Straddle Manual

Asset ID: B2070

Available: 1

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 035476. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 88" x 44" x 84" high. Made specifically for Siemens products.

Asset ID: B2070

Available: 1

Lift Truck, Straddle Manual

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 035476. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 88" x 44" x 84" high. Made specifically for Siemens products.

Chain Hoist 10 Ton

Asset ID: B2073

Available: 1

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7176. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high

Asset ID: B2073

Available: 1

Chain Hoist 10 Ton

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7176. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high

Chain Hoist 10 Ton

Asset ID: B2074

Available: 1

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high

Asset ID: B2074

Available: 1

Chain Hoist 10 Ton

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high

Weigh Scale

Asset ID: SC-1611

Available: 1

Weigh Scale. Upper garner, scale, lower garner. Hydraulic power pack 5HP for knife gate valves on both garners and scale hoppers. Still installed, removal extra.

Asset ID: SC-1611

Available: 1

Weigh Scale

Weigh Scale. Upper garner, scale, lower garner. Hydraulic power pack 5HP for knife gate valves on both garners and scale hoppers. Still installed, removal extra.

Base with Load Cells

Asset ID: AF3

Available: 1

Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N. See dataweigh.com and brochure in Links.

Asset ID: AF3

Available: 1

Base with Load Cells

Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N....

Hopper 590cf

Asset ID: AF7

Available: 1

Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft. Has bin vibrators on side and VibraRod vibratory level sensor on top. Closed top with approx 18" round inlet to accept drop from conveyor or feed.

Asset ID: AF7

Available: 1

Hopper 590cf

Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft....

Bulk Weigh Scale

Asset ID: BS-011

Available: 1

Bulk weigh scale and tower. Sized for 15,000 bu/hr. With hopper and rotary valve. It has 3 chambers – upper garner stationary, a middle hopper on 4 load cells, and a lower garner that empties into the drag conveyor. This is a Compuweigh Model CWC-158S. S/N 4908. The CWC-158S will do 15,000 bu/hr. The upper garner is 240 cu ft, the weight hopper is 160 cu ft, and the lower garner is 200 cu ft. The slide gates are hydraulically driven. Hydraulic system is 5 HP motor 460/3/60, 8 gpm with 20 gallon tank. Scale Overall height is 27'-8" which includes 4' of upper garner extension. Tower size is 8' x 8' x 40' tall. Equipment does not include DWC-400 . Compuweigh Shop Drawing 4909-158S60ST.

Asset ID: BS-011

Available: 1

Bulk Weigh Scale

Bulk weigh scale and tower. Sized for 15,000 bu/hr. With hopper and rotary valve. It has 3 chambers – upper garner stationary, a middle hopper on 4 load cells, and a lower garner that empties into the drag conveyor. This is a Compuweigh Model CWC-158S. S/N 4908....

Flatbed Trailer Drop Deck

Asset ID: AF98

Available: 1

Semi trailer - Drop deck trailer for semi truck. Mfg by Utility Trailer Corp in 1983. Length 45 ft x 96" wide. GVWR 90,000 pounds. VIN 1UY FS2448 EA9783 09.

Asset ID: AF98

Available: 1

Flatbed Trailer Drop Deck

Semi trailer - Drop deck trailer for semi truck. Mfg by Utility Trailer Corp in 1983. Length 45 ft x 96" wide. GVWR 90,000 pounds. VIN 1UY FS2448 EA9783 09.

Plug Screw Feeder

Asset ID: B-1011

Available: 1

### Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder ### **These units are NEW old stock, never used** Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48% Design flow rate 530 dry tons per day soft wood chips (500 BDST/D); Max capacity 1000 BDST/D; Turndown rate 50% **Valmet plug screw feeder** - Fed by a pre-compression screw section, and 48" shredder at outlet - 850 HP Siemens motor 1750 rpm 460v 3/60 - Gear Reducer ratio 25:1. Nominal speed 69 rpm, range 35-105 rpm - Skid size approx 25 ft long x 7 ft wide x 4.6 ft tall. Total weight including motor 45,400 lb - Inlet 35.83" x 25.79" **Pre-compression screw** - Materials of construction stainless steel 304L for all contact parts - Sits on top of plug screw at 90 degrees with s 24" diameter- top force feed - Capacity Volume/Revolution inlet/discharge: 45 L / 22.5 L. Capacity / revolution at 110 kg/m3 = 5.46 BDST/D and net max capacity at 110 kg/m3 = 530 BDST/D - 250 HP motor 1750 rpm 460v 3/60 v-belt drive to gear reducer V-belt reduction 1:52 - Gear reducer SEW Eurodrive ratio 18:1. Final rpm nominal speed 65 rpm, range 45-97 rpm - Overall size approx 15.2 ft long x 7 ft wide x 5.8 ft tall, weight 17,300 lb - Outlet: 35.83" x 25.79" **T-Pipe 48" Shredder** - Fed from plug screw feeder 24" biomass inlet - MAWP 350 psig at 800F - 100 HP motor 1750 rpm 460v 3/60 - Gear reducer 8.9:1 for nominal 197 rpm - Shredder size approx 5 ft x 10.6 ft x 9.3 ft tall, weight 23,650 lb - Outlet 24" flange 600# **Condition** - These units are sealed against weather, protected, and in long term storage inside a third party protected warehouse. No known refurbishment required - assets are sold As Is Where Is.

Asset ID: B-1011

Available: 1

Plug Screw Feeder

### Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder ### **These units are NEW old stock, never used** Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48% Design flow rate 530 dry tons per day soft wood chips (500 BDST/D); Max capacity 1000 BDST....

Flare Package for Dual Loadout System

Asset ID: FH-8201

Available: 1

Enclosed flare package designed by John Zink Company. VC Enclosed flare Model ZCT-1-4-25x1/6. This unit was designed for a loading rate of 1200 gpm of Ethanol with a max heat release of 5.2MMBtu/hr. Includes Flare Combustion Air Blower with 15HP motor, and Knock out pot 70 gallons size 24" x 36". Local controls. Sold as a set. Material cs. Used as flare for ethanol rail loadout.

Asset ID: FH-8201

Available: 1

Flare Package for Dual Loadout System

Enclosed flare package designed by John Zink Company. VC Enclosed flare Model ZCT-1-4-25x1/6. This unit was designed for a loading rate of 1200 gpm of Ethanol with a max heat release of 5.2MMBtu/hr....

Spout Loadout

Asset ID: SL-9144

Available: 1

Truck loadout funnel - Extendable, electric pendant control. Designed for loading grain at 319 t/hr max. See link for drawing. Used at ash bin CoGen. Part of Silo TS-9143 and not sold separately.

Asset ID: SL-9144

Available: 1

Spout Loadout

Truck loadout funnel - Extendable, electric pendant control. Designed for loading grain at 319 t/hr max. See link for drawing. Used at ash bin CoGen. Part of Silo TS-9143 and not sold separately.

Flare Package - Ethanol Truck Loadout

Asset ID: FH-8210

Available: 1

Flare package by John Zink Company. Flare includes Knock-out Pot capacity 70 gallons size 24" x 36" , Knockout Tank pump driven by 1.5 HP motor, flare stack 20" x 25', and flare blower Pennbarry DRM-DD-12 with a 1 HP 3500 rpm motor. Local controls. For drawing and data, see links. Used as Ethanol truck loadout flare.

Asset ID: FH-8210

Available: 1

Flare Package - Ethanol Truck Loadout

Flare package by John Zink Company. Flare includes Knock-out Pot capacity 70 gallons size 24" x 36" , Knockout Tank pump driven by 1.5 HP motor, flare stack 20" x 25', and flare blower Pennbarry DRM-DD-12 with a 1 HP 3500 rpm motor. Local controls. For drawing and data, see links....

Loading Station - Top, Dual Ethanol

Asset ID: PK-8219

Available: 1

### Two Station Liquid Load Out System ### Liquid Loadout system, TWO station originally designed for ethanol at 1200 gpm. Has 4 inch load out line with vent, two station loadout with cantilevered platforms & safeties, galvanized stairs, two OPW 4" swivels and loading arms, slide out platform, Ethanol Rail Loadout (2) station. Filter - Krystil Klear Filtration 150 psig @ 300F, (2) Meters, [The flare system is asset FH-8201 valued separately] This is a complete system. Controls not included. Built 2009 but not used. Currently set up on rail but can be used for rail or truck loadout. See link for GA drawing and schematic detailed information

Asset ID: PK-8219

Available: 1

Loading Station - Top, Dual Ethanol

### Two Station Liquid Load Out System ### Liquid Loadout system, TWO station originally designed for ethanol at 1200 gpm....

Loading System Package - DDGS, solids

Asset ID: PK-8420

Available: 1

### Biomass or Solids Load Out System 1500 cu ft/hr ### Package system: Mass Loadout system - last used for DDGS Rail or Truck Loadout Facilities. Includes 75 ft drag conveyor CON-013 delivering DDGS at 15,000 cfh (240 ton/hr), Dynatek articulated loading arm, two 30' drag conveyors feeding the spout, vertical pedestal structure, and pendant control - includes SLY model XP-12 loading spout. Includes control house inside (asset BL-8422) but not main building. We can include loadout building (see BL-8421) - priced separately. Load out for two rail or trucks spots side by side. We can mix and match components to align with your system needs. For a list of all components in this loadout system, enter "PK8420" into the keyword search box.

Asset ID: PK-8420

Available: 1

Loading System Package - DDGS, solids

### Biomass or Solids Load Out System 1500 cu ft/hr ### Package system: Mass Loadout system - last used for DDGS Rail or Truck Loadout Facilities....

Loadout Spout

Asset ID: SL-015

Available: 1

Sly XP bulk material loading spout - model XP-12. Has internal stacking cones to direct material flow. When used with a negative pressure dust collection system, it is truly dust-free. Rated at 240 tons/hr. See drawing link. Part of complete DDGS loadout system - Enter "PK8420" into keyword search box for system and all components.

Asset ID: SL-015

Available: 1

Loadout Spout

Sly XP bulk material loading spout - model XP-12. Has internal stacking cones to direct material flow. When used with a negative pressure dust collection system, it is truly dust-free. Rated at 240 tons/hr. See drawing link....