Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Hoppers & weigh scales'
6 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
Weigh Scale and Belt Conveyor
Asset ID: P0102
Available: 1
Weigh scale belt mounted. Ramsey model XR-125. Designed for soybean at density 0.72 t/m3, flow rate 50 T/H. Belt width 600mm, motor 1.1kw. 2.2kw (3HP), 460V,60Hz. IP54. Idle since 2006
Asset ID: P0102
Available: 1
Weigh Scale and Belt Conveyor
Weigh scale belt mounted. Ramsey model XR-125. Designed for soybean at density 0.72 t/m3, flow rate 50 T/H. Belt width 600mm, motor 1.1kw. 2.2kw (3HP), 460V,60Hz. IP54. Idle since 2006
Base with Load Cells
Asset ID: AF3
Available: 1
Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N. See dataweigh.com and brochure in Links.
Asset ID: AF3
Available: 1
Base with Load Cells
Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N....
Hopper 590cf
Asset ID: AF7
Available: 1
Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft. Has bin vibrators on side and VibraRod vibratory level sensor on top. Closed top with approx 18" round inlet to accept drop from conveyor or feed.
Asset ID: AF7
Available: 1
Hopper 590cf
Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft....
Multi-Head Weigher
Asset ID: 8812
Available: 1
### Multi-head Weigher ###
Model RS10 used for high-speed particulates. Proprietary hopper / feeder design eliminates flow control variables. Weigh mode retained with each program - switch from grams to pounds to ounces, etc. at the touch of a key. Includes all linear plates, feed buckets, weigh buckets and funnel plates.
Specifications:
* Resolution: 1 /100 oz. (1 /10 gram)
* Capacity: 1 lb. (500 gram) standard to 5 lb. (2.5 kg) optional
* Hopper size: 1.75 cubic feet (50 liters) standard to 12 cu. feet (340 liters) optional
* Electrical: 220 volt, single phase, 1 amp, 60 hertz
* Air requirements: 60 psi, less than 1 /10 cfm
* Speed: 10 - 18 cycles per lane per minute at 2/10% (.2%) accuracy
Asset ID: 8812
Available: 1
Multi-Head Weigher
### Multi-head Weigher ### Model RS10 used for high-speed particulates. Proprietary hopper / feeder design eliminates flow control variables. Weigh mode retained with each program - switch from grams to pounds to ounces, etc. at the touch of a key....
Hopper 350 cu ft with auger
Asset ID: 8852
Available: 1
## Hopper with Auger ##
**Hopper:** NEW, open top hopper on legs, carbon steel. Size is 126” w x 77” long x 144” OAH. Capacity approx 350 cu ft. Hopper has 60 degree taper at bottom to an internal screw driven by 1 HP vertical gearmotor. and dropping into an external drag conveyor approximately 12 ft long driven by a 1 HP vertical gear motor. Has end opening square manhead. Built in 2022, NEW, never used. Has been in weather so would need to be blasted and painted.
**Screw Conveyor:** Includes Screw Conveyor (auger): Screw conveyor 5.25” dia x 17 ft long, belt driven by 3 HP motor 230/460v 3/60 at 1760 rpm and Dodge speed reducer ratio 14.91:1 (final rpm 62. Manufactured by Nordstrong. Designed for 18 cu ft/min (cfm) of product density 42 lb/cu ft. Conveyor designed for a 30 degree inclination.
**Hopper Stand**: Hopper structural steel stand with 4 Rice lake load cells. Carbon steel.
## Price incudes all 3 pieces ##
Asset ID: 8852
Available: 1
Hopper 350 cu ft with auger
## Hopper with Auger ## **Hopper:** NEW, open top hopper on legs, carbon steel. Size is 126” w x 77” long x 144” OAH. Capacity approx 350 cu ft. Hopper has 60 degree taper at bottom to an internal screw driven by 1 HP vertical gearmotor....
Hopper 100 cu ft sloped outlet
Asset ID: 8853
Available: 1
NEW, open top hopper square with 30 degree taper bottom to center, on legs including platform on one side. Size 53” w x 55” long x 72” OAH. Capacity approx 100 cu ft. On 4 Rice Lake load cells. Direct drive external screw conveyor approx. 3” dia x 10 ft long, driven by 1 HP motor 1145 rpm with Nord 33:1 gearbox. 460v 3/60.