S4M | Packaging

Location

Right angle gearbox and motor, for top entering tank agitator. Model XCEL 500. Motor is 15 HP,...

Gearbox + Motor 15HP

Asset ID: A-1306

United Equipment Technologies

Right angle gearbox and motor, for top entering tank agitator. Model XCEL 500. Motor is 15 HP, 1800 rpm. United Equipment Technologies Corp. Includes Falk Right angle gear box. Output 47 rpm. This is gearbox and motor only - used. [Photos of shaft and blades are included for info only to indicate prior service - not available. Shaft diameter : 3.5". Came from 26 ft dia tank x 39.5ft tall ] Idled since 2012.

Condition

Location

Belt conveyor, rubber cleated 23.625" wide. .Includes hopper infeed. Drive motor is 1/2 HP...

Conveyor/Belt

5 Items

Asset

Description

Condition

Location

Belt Conveyor

Asset ID: 2057

Belt conveyor, rubber cleated 23.625" wide. .Includes hopper infeed. Drive motor is 1/2 HP 230/460 3/60 1725 rpm with Nord gaer unit. Built 2019. Part of an entire CBD extraction system - enter PK6020 to see all components.

Condition

Inclined belt conveyor (last used to feed hopper). Approx size 18" wide x 12 ft long.

Location

Northern US

Belt Conveyor 12 ft

Asset ID: AF8

Condition

Location

Biomass belt conveyor for bulk conveying. Stainless steel frame with cleated belt. In a "Z"...

Biomass Belt Conveyor ss

Asset ID: 8569

Biomass belt conveyor for bulk conveying. Stainless steel frame with cleated belt. In a "Z" configuration. Driven by a 1/2 HP motor at 1720 rpm 230/460v 3/60. Conveyor is 19 ft long x 6ft-6in tall x 31 inches wide. Pick-up height at bottom infeed is 8.5 inches. Belt runs slow - approx. a few feet per minute; material is either rubber or perm.

Condition

Location

Biomass stainless steel conveyor, approx size 16 inch wide x 24 ft long. Belt conveyor with...

Biomass Conveyor ss

Asset ID: 8561

Marathon

Biomass stainless steel conveyor, approx size 16 inch wide x 24 ft long. Belt conveyor with flights. Driven by 1 HP motor 230/460v 3/60 TEFC. . The motor is 3-phase so it can be set up for a variable speed.

Condition

Location

### Inclined Bag Flattener Conveyor ### Slidell inclined flattener. Model # 1550. Travel length...

Conveyor ( Bag Flattener )

Asset ID: 8821

Slidell

### Inclined Bag Flattener Conveyor ### Slidell inclined flattener. Model # 1550. Travel length of belt/flattener is: 13' discharge section and 4.5' infeed section. Belt width is 19", frame width is 24". Overall physical dimensions are 17' x 3' x 9'. Flattener was in operation through early 2026. Now idled and stored in protected warehouse

Condition

Air core reactors by Trench Electric, Canada. Dry type, air cooled, rated at 2000 KVA, system...

Location

Pennsylvania

Electrical

5 Items

Asset

Description

Condition

Location

Air Core Reactors 2000 KVA

Asset ID: B2094

Trench Electric

Air core reactors by Trench Electric, Canada. Dry type, air cooled, rated at 2000 KVA, system volts 13.8 kV, 60 Hz, 1 phase. Rated impedance 0.5 ohm. Built 1993. Serial numbers 117770-4, 117770-3, and 117770-6. Weight 2150 pounds each. Two assembled, one in pieces. Qty (3) - sold as a LOT

Condition

Square D disconnect for 100HP vacuum pumps 460v. Quantity (2) - priced separately.

Location

Peoria, IL

Disconnect 100HP

Asset ID: AF91

Square D

Condition

Location

Gavita 1000 watt grow light. 120-240v AC

Grow Lights

Asset ID: V2214

Gavita

Condition

Location

MCC-1 Motor Control Center - Square D

MCC

Asset ID: MCC-1

Square D

Condition

Location

MCC-2 Motor Control Center - Square D

MCC

Asset ID: MCC-2

Square D

Condition

Location

### VFD Variable Frequency Drives by ABB ### **Priced for the LOT of all 15** Sold as a...

Electrical/VFD

2 Items

Asset

Description

Condition

Location

VFD (LOT of 5HP and 1HP) Qty 15 NEW

Asset ID: V7898

ABB

### VFD Variable Frequency Drives by ABB ### **Priced for the LOT of all 15** Sold as a package, ready to ship stretch wrapped on a pallet - Variable Frequency Drive 1HP. Manufactured by ABB. Model # ACS355-03U-04A7-2. Input voltage 208/240V, 50/60Hz, 3PH. Output: 4.7 KV-A. New-old stock. Quantity (9) available, - Variable Frequency Drive 5HP. Manufactured by ABB. Model # ACS355-03U-17A6-2. Input voltage 208/240V, 50/60Hz, 3PH. Output 19 KV-A. New-old stock. Quantity (6) available.

Condition

Location

SEW variable frequency drives (VFD) Movidrive. Inverter. SEW part number 08249571. Type...

VFD 7.5 HP

Asset ID: AF90

SEW

SEW variable frequency drives (VFD) Movidrive. Inverter. SEW part number 08249571. Type MDX61B0055-5A3-4-OT. Size 5.5KW (7.5HP). Input 3x380-500v with 3HP output. Small footprint 105mm x 314mm weighing 2.8kg. Quantity (10) - priced separately

Condition

Location

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81739 FSPN-1100...

Filters

3 Items

Asset

Description

Condition

Location

Bag Filter

Asset ID: BDFB-001

Pall Filter Specialists

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81739 FSPN-1100 #4 C/S

Condition

Location

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81728 FSPN-355...

Bag Filter

Asset ID: BDFB-002

Pall Filter Specialists

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81728 FSPN-355 #4 C/S

Condition

Location

Vertical Leaf Filter 3.58 feet x 7.5 feet, 560 capacity, Model VLD-160-9, S/N 25133, 90 psig

Vertical Leaf Filter

Asset ID: VLF-113

LEEM

Condition

Location

Multiple Bag Filter by Klear. Connections 8” 150# inlet/ outlet;. Has Quick Change Head,...

Filters/Bag Filter

5 Items

Asset

Description

Condition

Location

Bag Filter

Asset ID: 8854

Klear

Multiple Bag Filter by Klear. Connections 8” 150# inlet/ outlet;. Has Quick Change Head, Service Pressure Rating - 150 PSI, No. of Bags – 8. An 8-bag industrial multi-bag filter housing typically handles a maximum flow rate of 1,500 to 2,000 GPM (gallons per minute) (or up to roughly 320 m³/h), using eight standard Size #2 filter bags (7" diameter by 32" length) Must be verified by opening up filter housing.

Condition

Location

Stainless Steel Bag Filter with platform, Model # BG1122FHJSS, year built 2003. Uses #2 bags x...

Bag Filter ss with platform

Asset ID: 2101

Ess Corp

Stainless Steel Bag Filter with platform, Model # BG1122FHJSS, year built 2003. Uses #2 bags x 30". Certified by ESS Corp. MAWP 800 gpm maximum flow rate /150 psi at 200 Fahrenheit. Serial # 2046, Includes platform and handrail shown in photos - size approx 3 ft x 4 ft.

Condition

Location

### Bag Filter NEW 4-Bag with 4" Connections ### NEW Bag Filter 4" inlet / outlet. Manufactured...

Bag Filters 4" ss

Asset ID: 8817

PRM Filtration

### Bag Filter NEW 4-Bag with 4" Connections ### NEW Bag Filter 4" inlet / outlet. Manufactured by PRM Filtration. Model BFHBFM4SSXV2. Rated 150 psig / 525 gpm. Uses (4) #2 size filter bags (7-1/16" dia x 32" L). Easy open top with toggle bolts and handwheel.. In stock - ships immediately, subject to prior sale. Price includes shipping and delivery to areas of the US from the middle to Eastern US. Delivery to West of that will be slightly more. Qty (4) available ( priced separately )

Condition

NEW

Location

North Carolina

Filter Bags - Qty 155 Size 2

Asset ID: H2036

Filter bags for polish filter, size #2. There are 6 boxes of 25 bags each. P2S Polyester Felt...

Filter bags for polish filter, size #2. There are 6 boxes of 25 bags each. P2S Polyester Felt Filter Bag. Bags measure 2 ft 5 in long. Priced for the LOT.

Condition

Location

### Multi Bag Filter Housing System ### New - never used 7 filter bag housings on a common...

Multi Bag Filter System 1200 gpm

Asset ID: 8829

Eaton

### Multi Bag Filter Housing System ### New - never used 7 filter bag housings on a common manifold. Model M-TBF-0702. This was custom built with a 4" manifold. There are seven x 2" flanged Bag filters. Takes #2 long bags. Quick opening lids with lugs. Flow rate at 1,233 GPM.

Condition

Location

### Cartridge Filter Vessel ### Horizontal filter vessel with 19 elements for coalescing or...

Filters/Cartridge Filter

3 Items

Asset

Description

Condition

Location

Cartridge Filter Vessel

Asset ID: 7899

Champion Process

### Cartridge Filter Vessel ### Horizontal filter vessel with 19 elements for coalescing or particle cartridges. Max flow 7,000 gpm gasoline and 5,000 gpm water. ASME MAWP 200 psig at 100F.. Size 36" dia with 12" Inlet. For 6" dia cartridge filters of 40", 60" & 80" long. Particle filter cartridges are normally 6" dia x 80" long. Coalescing cartridges are normally 6" dia x 40" long. On saddles and steel skid. Used but in good condition.

Condition

Location

Cartridge filters, material stainless steel 304. Has . 4" inlet and 4" outlet. Filter specs are ...

Cartridge Filters

Asset ID: FC-1513

Cartridge filters, material stainless steel 304. Has . 4" inlet and 4" outlet. Filter specs are approximately: hold (20) two inch cartridges that are 40" long. Diameter on filter is 16 inches. OAH is 48" ( 44" to the first lip ). Filter is on angle iron legs 4" tall. Quantity (2) - priced for the set

Condition

Location

Wamflo stainless steel cartridge filter for powder. Type FNC2J12PPOY, serial 11-FN-13-0004866....

Dust Cartridge Filter 129sf

Asset ID: AF11

Wam

Wamflo stainless steel cartridge filter for powder. Type FNC2J12PPOY, serial 11-FN-13-0004866. Size 24" dia x 36" tall on ss skid. Has 8 elements x 920mm long. Filter elements are pleated non-woven polyester. Filter surface area is 12 sq m (129 sf). Self-cleaning - uses compressed air countercurrent cleaning system with timer. Manufactured by Wam.

Condition

Location

Trivolt electric circulation heater CIRH-0024. Rated at 60 KW 480v 3/60. NEMA. Pressure MWP 150...

Heat Exchanger

21 Items

Asset

Description

Condition

Location

Circulation Heater

Asset ID: V2238

Trivolt

Trivolt electric circulation heater CIRH-0024. Rated at 60 KW 480v 3/60. NEMA. Pressure MWP 150 psi. Price includes loading. Crating or protection extra

Condition

Location

Trivolt electric circulation heater CIRH-0024. Rated at 30 KW 480v 3/60. NEMA. Pressure MWP 150...

Circulation Heater

Asset ID: V2239

Trivolt

Trivolt electric circulation heater CIRH-0024. Rated at 30 KW 480v 3/60. NEMA. Pressure MWP 150 psi. Quantity (6) priced separately Price includes loading on your truck. Any crating or protection will be additional.

Condition

Location

Heat Exchanger MAWP Shell 125 psi @ 500F, Tubes 125 psi @ 750F, MDMT Shell -20F @ 125 psi, -20F @...

Heat Exchanger

Asset ID: H-1001

Rubicon

Heat Exchanger MAWP Shell 125 psi @ 500F, Tubes 125 psi @ 750F, MDMT Shell -20F @ 125 psi, -20F @ 125 psi, S/N 4031-2

Condition

Location

Mason heat exchanger 1835 sq ft area, MAWP Shell: 130 psi @ 600F, Tubes: 75 psi @ 600F, MDMT...

Heat Exchanger

Asset ID: H-1002

Mason Mfg

Mason heat exchanger 1835 sq ft area, MAWP Shell: 130 psi @ 600F, Tubes: 75 psi @ 600F, MDMT Shell: -20 @ 75 psi, Tubes: -20F @ 75 psi, S/N 17-6809

Condition

Location

Heat Exchanger 7.09" W x 1905" H x 9" L, 10.7 Sq Ft area

Heat Exchanger

Asset ID: H-103

WCR

Condition

Location

Heat Exchanger by WCR, Single pass flow heat exchanger

Heat Exchanger

Asset ID: H-104

WCR

Condition

Location

API Basco heat exchanger 6 x 132 AW Hairpin P/N 1470-06-132-000, S/N E140279-201. MAWP Shell...

Heat Exchanger

Asset ID: H-209

API

API Basco heat exchanger 6 x 132 AW Hairpin P/N 1470-06-132-000, S/N E140279-201. MAWP Shell 110 psi @ 820F, Tubes 3350 psi @ 775F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3350 psi. 41.63 inch OAH, 154.56 inch OAL, 28.25 OAW, 129.82 sq ft

Condition

Location

Heat Exchanger by API Basco 10 x 312 AW Hairpin, P/N 1470-10-312-000. S/N E140279-301. Shell...

Heat Exchanger

Asset ID: H-211

API

Heat Exchanger by API Basco 10 x 312 AW Hairpin, P/N 1470-10-312-000. S/N E140279-301. Shell MAWP 110 psi @ 690F, Tubes 3320 psi @ 775F, Shell MDMT -20F@110 psi, Tubes -20F @ 3320 psi. Year 2014. 42 inch OAW, 57.25 OAH, 342 OAL, 1070 sq ft area

Condition

Location

API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-12-300-000, S/N E140279-401. Shell 110 psi...

Heat Exchanger

Asset ID: H-308

API

API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-12-300-000, S/N E140279-401. Shell 110 psi @ 650F MAWP, Tubes 3360 psi @ 590F, Shell - 20F @ 110 psi, Tubes -20F @ 3360 psi. 61.63 inch OAH, 332.38 inch OAL, 45 inch OAW. Year 2014, Empty Weight 14305 lbs

Condition

Location

API Basco heat exchanger 4 x 132 AW Hairpin P/N 1470-04-132-000, S/N E140279-501. MAWP Shell 110...

Heat Exchanger

Asset ID: H-309

API

API Basco heat exchanger 4 x 132 AW Hairpin P/N 1470-04-132-000, S/N E140279-501. MAWP Shell 110 psi @ 820F, Tubes 3350 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3350 psi. 34.38 inch OAH, 152.69 inch OAL, 21 inch OAW

Condition

Location

API Basco heat exchanger 12 x 312 AW Hairpin (stacked) P/N 1470-12-312-000, S/N E140279-601. ...

Heat Exchanger

Asset ID: H-311

API

API Basco heat exchanger 12 x 312 AW Hairpin (stacked) P/N 1470-12-312-000, S/N E140279-601. MAWP Shell 110 psi @ 650F, Tubes 3320 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3320 psi. 98 inch OAH, 343.88 inch OAL, 57.63 inch OAW

Condition

Location

API Basco heat exchanger 10 x 324 AW Hairpin P/N 1470-10-324-000, S/N E140279-701. MAWP Shell...

Heat Exchanger

Asset ID: H-406

API

API Basco heat exchanger 10 x 324 AW Hairpin P/N 1470-10-324-000, S/N E140279-701. MAWP Shell 110 psi @ 650F, Tubes 3360 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3360 psi. 57.25 inch OAH, 356 inch OAL, 42 inch OAW

Condition

Location

API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-04-120-000, S/N E140279-801. Shell MAWP...

Heat Exchanger

Asset ID: H-407

API

API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-04-120-000, S/N E140279-801. Shell MAWP 110 psi @ 820 MAWP, Tubes 3350 psi @ 690F, MDMT Shell - 20F @ 110 psi, Tubes -20F @ 3350 psi. 34.38 inch OAH, 141.69 inch OAL, 21 inch OAW, Year 2014, Empty Weight 1800 lbs

Condition

Location

API Basco heat exchanger 12 x 306 AW hairpin (stacked) P/N 1470-12-306-000, S/N E140279-901. ...

Heat Exchanger

Asset ID: H-409

API

API Basco heat exchanger 12 x 306 AW hairpin (stacked) P/N 1470-12-306-000, S/N E140279-901. Shell MAWP 110 psi @ 650F MAWP, Tubes 3320 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3320 psi. 337.38 inch OAH, 337.38 inch OAL, 57.63 inch OAW, Year 2014, Empty Weight 29185 lbs

Condition

Location

Rubicon Heat exhanger, Shell & Tube, SS304, MAWP Shell 150 psi @ 450F, Tubes 150 psi @ 350F, MDMT...

Heat Exchanger

Asset ID: H-503

Rubicon

Rubicon Heat exhanger, Shell & Tube, SS304, MAWP Shell 150 psi @ 450F, Tubes 150 psi @ 350F, MDMT Shell -20 @ 450F, Tubes -20@350F, S/N 4021-2, 8 5/8 inch O.D. x 71 7/8" L, 71.6 sq ft area, Model VT8A1-72VE

Condition

Location

Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 75 psi @ 250F, Tubes...

Heat Exchanger

Asset ID: H-707

Rubicon

Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 75 psi @ 250F, Tubes 50 psi @ 250F, MDMT Shell - 20 F @ 100F, Tubes -20 @ 50F, S/N 4024-5, VS34CU2-180H

Condition

Location

Rubicon Economizer Model WC10B1-168HE, MAWP Shell 100 psi @ 400F, Tubes 75 psi @ 400F, MDMT Shell...

Heat Exchanger

Asset ID: H-802

Rubicon

Rubicon Economizer Model WC10B1-168HE, MAWP Shell 100 psi @ 400F, Tubes 75 psi @ 400F, MDMT Shell -20F @ 100 psi, Tubes -20 @ 75 psi, S/N 40242

Condition

Location

Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 100 psi @ 250F, Tubes...

Heat Exchanger

Asset ID: H-803

Rubicon

Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 100 psi @ 250F, Tubes 100 psi @ 350F, MDMT Shell - 20 F @ 100psi, Tubes -20 @ 50psi, S/N 4024-3, WC18B1-168HE, 18 inch diameter x 194.875 inch L

Condition

Location

Rubicon Heat exchanger, MAWP Shell 125 psi @ 700F, Tubes 75 psi @ 500F, MDMT -20F @ 125 psi,...

Heat Exchanger

Asset ID: H-804

Rubicon

Rubicon Heat exchanger, MAWP Shell 125 psi @ 700F, Tubes 75 psi @ 500F, MDMT -20F @ 125 psi, Tubes -20F @ 75 psi, S/N 4024-1, Model WC10B1-168HE

Condition

Location

Rubicon Heat exchanger, MAWP shell 100 psi @ 250F, Tubes 100 psi @ 500F, MDMT -20F, Model...

Heat Exchanger

Asset ID: H-810

Rubicon

Rubicon Heat exchanger, MAWP shell 100 psi @ 250F, Tubes 100 psi @ 500F, MDMT -20F, Model WC4B1-168HE, S/N 4024-4, 4 1/2 inch OD x 185 inch OAL

Condition

Location

Heat Exchanger by API Basco 10 x 300 AW Hairpin P/N 1470-10-300-000. S/N E140279-101. Shell MAWP...

Heat Exchanger Hairpin 862 sf

Asset ID: H-208

API

Heat Exchanger by API Basco 10 x 300 AW Hairpin P/N 1470-10-300-000. S/N E140279-101. Shell MAWP 110 psi @ 690F, Tubes 3360 psi @ 775F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3360 psi. 57.25 OAH, 42 inch OAW, 329.88 OAL, 861.84 sq ft area

Condition

Location

NEW, still in crate- never used. Model: DRX 305 6CKTS, IMMER 100”, 0.475” INC 800EL, NEM, ME1448...

Heat Exchanger/Immersion

2 Items

Asset

Description

Condition

Location

Flanged Immersion Heater 260 kw

Asset ID: 8850

Durex

NEW, still in crate- never used. Model: DRX 305 6CKTS, IMMER 100”, 0.475” INC 800EL, NEM, ME1448 – N100P – 260KW, Duty 260KW, Power: 480V 3PH • Specification sheets (and design data) from manufacturer Total Power: 260KW, 3PH, 3 circuits, 104.36 AMPS per circuit Flange Size: 14” 150# 304SS Flange; Immersion Length: 100”. The DRX 305 6CKTS is a heavy-duty industrial electric flange immersion heater rated at 480V, 3-phase, and 260 kW.

Condition

NEW

Location

### Immersion Heater ### Immersion heater, ANSI 14" 150# 304 SS Flange Heater. - Manufactured...

Immersion Heater 300 kw

Asset ID: 8842

Durex

### Immersion Heater ### Immersion heater, ANSI 14" 150# 304 SS Flange Heater. - Manufactured by Durex. Model # MF1604-S860P. 300KMW. Design is 2630 kPag@500/-29C. 480V / 3 phase / 60Hz. NEMA 4 - Has 54 elements 0.475 dia metal incoloy rated at 4814W 480v The Durex Industries MF1604-S860P is a heavy-duty industrial 300 kW electric inline immersion and circulation heater operating on 480V 3-phase power, typically used for high-capacity fluid heating in oil, gas, and industrial process applications

Condition

NEW

Location

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can...

Heat Exchanger/Scraped Surface

1 Items

Asset

Description

Condition

Location

Scraped Surface Heat Exchanger

Asset ID: 7145

Votator

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can recondition if needed. S/N 3455353. Direct Driven by 20HP motor, 1755 rpm/230 rpm out. All wetted surfaces are stainless steel 304, barrel is Chromium plated Nickel. Has 4 rows of ss blades (24 total). MAWP shell 250 psig at 375F/-20F, jacket 150 psig at 375F/-20F. Heat exchange surface area 9 cu ft. Gear reducer Reynold ser No. 3455353, size 5. ratio 7.63:1, output 230 rpm. Volume in tube (product) 880 cu in, volume in jacket 1080 cu in. Physical weight of cylinder & tube is 1100 pounds. Total weight with frame & motor is approx 2500 pounds. Price includes removal & loading on your truck Sold As Is Where Is however, this unit can be reconditioned for additional cost. Cleaned, painted, inspected, new seal, new bearings - 3 month guarantee material and workmanship. New blades and barrel re-chrome are extra options

Condition

Used - Fair

Location

### GAS STATION™ From E/One ### **GAS STATION is a new modular approach to gas control and...

Instrument

4 Items

Asset

Description

Condition

Location

Generator Gas Dryer and Analyzer

Asset ID: 8881

e One ( Environmental One Corp )

### GAS STATION™ From E/One ### **GAS STATION is a new modular approach to gas control and monitoring for hydrogen-cooled generators** The E/One Gas Station is a modular approach that combines monitoring and control systems onto a single skid **MODULES** - Generator Gas Analyzer - GGA The Generator Gas Analyzer (GGA) continuously analyzes generator cooling gas during normal and purge operations to ensure optimum purity levels and maximum operational efficiency. Assembly # HD0135G01. Serial # GS 0109. Single phase, 120 VAC, 30 Watts, 50/60Hz. Thermocnductivity measurements designed for gas flow rates fro 100 to 700 cc/min. Triple-range sensor/analyzer that provides continuous monitoring of gas purity during all phases of generator operation. - Generator Gas Dryer - GCD eOne's Generator Gas Dryer (GGD) removes contaminants from the hydrogen cooling gas through all phases of generator operation. Assembly # DD0125G07. Serial # GGD 0112. Single phase, 480 VAC, 2.4 KW, 50/60 Hz. Dual-chamber system continuously dries and recirculates generator cooling gas

Condition

Location

INSTRUMENTS Priced for the lot. Representative photos shown here for list below. **Click on...

Instrument Components (complete LOT)

Asset ID: 8861

INSTRUMENTS Priced for the lot. Representative photos shown here for list below. **Click on Link for all details and photos** * **One - Vegapuls 62 Radar Sensor** PS62.KFEAMHHANXX VEGA PS62.KFEAMHHANXX 75 * **One - Filter Regulator** LFR-D-MIDI with On/Off Valve HE-D-MIDI FESTO LFR-D-MIDI 75 * **One - Explosion Proof Pressure Transmitter** IDP25-T22B21F-M2VL1 Foxboro IDP25-T22B21F-M2VL1 75 * **One - Pointek CLS200 Level Switc**h 7ML56400BF011JA0 SIEMENS 7ML56400BF011JA0 75 * Two - Vegaflex 86 Wave Radar Level Sensor FX86.CDCAD2HXDNAX VEGA FX86.CDCAD2HXDNAX 75 * One - 8800D 4-20mA HART Meter LCD Indicator Kit 8800-5640-1003 Rosemount 08800-5640-1003 75 * Two - Vegaflex 86 Wave Radar Level Sensor FX86.CDCAD2HXDNAX (No Cable) VEGA FX86.CDCAD2HXDNAX 75 * One - Sitrans LR250 Radar Level Transmitter 7ML54310AD100BB1 SIEMENS 7ML54310AD100BB1 75 * One - VEGABAR 61 Pressure Transmitter w/ Separating Diaphragm BR61.CXFRH1RPKMAX VEGA BR61.CXFRH1RPKMAX 75 * Three - Diaphragm Pressure Switch, 0.03-3ps. 125/250VAC D1X-A3SS-UL Barksdale D1X-A3SS-UL 75 * One - 3051S Coplanar Pressure Transmitter 3051SAL2SG2AA2A2620ZFF w/ Diaphragm Rosemount 3051SAL2SG2AA2A2620ZFFG2DAA 75 * Four - Electric Level Controller L2e FISHER L2e 75 * Two - SITRANS P Pressure Transmitter 7MF4234-1FA10-1NC6-Z SIEMENS 7MF4234-1FA10-1NC6-Z 75 * One - 8800 Vortex Flow Meter Body Only 08800-5622-1011 Rosemount 08800-5622-1011 75 * Two - 3051S Coplanar Pressure Transmitter 3051SAL2SG2AA2A2620ZFF w/ Diaphragm Rosemount 3051S 75 * One - Pointek CLS200 Level Switch 7ML56300BB000GA0 SIEMENS 7ML56300BB000GA0 75 * Two - Electric Flow Switch 1520B-F5A-C-L9-EF-CSCV SOR 1520B-F5A-C-L9-EF-CSCV 75 * Two - Side Mounted Level Switch 1510B-G2A-C-L9-ES-CSCV SOR 1510B-G2A-C-L9-ES-CSCV 75 ## 29 Pieces - All above equipment is sold as One LOT for price quoted. ##

Condition

Location

Adtech powered isolated signal converter, model SCT 502 snap track mounting. Input 4-20 maDC,...

Isolated Signal Converter

Asset ID: S2000

Adtech

Adtech powered isolated signal converter, model SCT 502 snap track mounting. Input 4-20 maDC, output 4020 maDC. Power 115 vac. The Adtech Model SCT 502 AC powered Isolated Signal Converter provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, computers, DCS and PLC systems. The SCT 502 breaks the galvanic path between the transmitted signal and the output receiving device insuring reliable and accurate signal transfer. Qty (10) - priced separately

Condition

Location

Hardy load cell weigh module HI PRC03-45C with integral load cell model HI RCH04-50K rated at...

Load Cell Weight Modules

Asset ID: V2266

Hardy

Hardy load cell weigh module HI PRC03-45C with integral load cell model HI RCH04-50K rated at 50,000 pounds each. Includes mounting plates for this weigh module: 16" x 16" leg mounting plate and 14" x 25" base plate. Carbon Steel, zinc plated. Qty (20) - priced separately We can offer a 50% discount if all 20 are bought as a lot.

Condition

Used - Excellent

Location

Allen Bradley Panelview 900. Has 9 inch screen. Cat 2711-K9A2. Series F. Display is AC plasma...

Instrument/plc & HMI

1 Items

Asset

Description

Condition

Location

AB PanelView 900

Asset ID: H2007

Allen Bradley

Allen Bradley Panelview 900. Has 9 inch screen. Cat 2711-K9A2. Series F. Display is AC plasma monochrome 640 x 400 pixel resolution, it has 16 function keys with a keypad operator interface. Serial MK1LN91K, Operator Interface features a DH-485 communication port so the device allows connectivity with an SLC controller, a DH-485 network, a MicroLogix controller, or a Wallmount Power Supply. 100-240 vac 50/60 Hz. Display area 8.27 x 5.17 inches.

Condition

Location

Koehler KLA-1-TS cloud point analyzer

Lab

15 Items

Asset

Description

Condition

Location

Cloud Point Analyzer

Asset ID: V2221

Koehler

Condition

Location

Yamato high performance constant temperature oven, forced convection, programmable.Operating temp...

Constant Temperature Oven

Asset ID: V2209

Yamato

Yamato high performance constant temperature oven, forced convection, programmable.Operating temp +15C to 210C at +/- 0.5C accuracy. Stainless steel interior. And 4 ss shelves Has two heaters at 1.5kW. Internal capcity 540 L.Power requirement 220v AC single phase. Ser # 60500486. Price includes loading on your truck. Skidding and protection extra. See data sheet

Condition

Location

Heidolph 20L evaporating flask

Flask 20L

Asset ID: V2211

Heidolph

Condition

Location

Across digital heating and stirring Mantle. Model DigiM10. Capacity 10,000 ml. Power 110v, 2100...

Heater Stirrer

Asset ID: V2215

Across Int'l

Across digital heating and stirring Mantle. Model DigiM10. Capacity 10,000 ml. Power 110v, 2100 watts. Serial # 202491

Condition

Location

Across Int'l Digital heating and stirring mantle. Model DigiM500. 500 ml capacity. Stirring from...

Heater Stirrer

Asset ID: V2207

Across Int'l

Across Int'l Digital heating and stirring mantle. Model DigiM500. 500 ml capacity. Stirring from 110 rpm to 1500 rpm, heating from ambient to 300C, flask holder capacity 500ML Ai DigiM 500mL plug and play magnetic stirring and heating mantle.

Condition

Location

Contifuge Stratos pelletizing continuous flow centrifuge

Lab Centrifuge

Asset ID: V2222

Contifuge Stratos

Condition

Location

### Rotofix 46 Benchtop Centrifuge ### Rotofix 46 Benchtop Centrifuge. Manufactured by Hettich....

Lab Centrifuge

Asset ID: 1090

Hettich

### Rotofix 46 Benchtop Centrifuge ### Rotofix 46 Benchtop Centrifuge. Manufactured by Hettich. Model # 4600-01. **Specifications:** - Maximum Capacity 4 x 290ml - Maximum Blood Tubes 4 x 100ml - Maximum Conical Tubes 4 x 165ml - Ambient Temperature, 4000 rpm The Hettich Rotofix 46 Benchtop Centrifuge, for use in the industrial and research laboratory, carries a wide range of accessories for both routine tasks and specialty applications. Based on the popular Rotofix series, the centrifuge is a robust and economical choice for Organic and Inorganic Chemistry, Preparatory and Analytical Chemistry, Electroplating, Petro-chemistry and Dairy. Note: one image is a representative catalog photo.

Condition

Across vacuum oven model AT19. serial # 20209007. Temp range ambient to 480F. Power110v 50/60...

Location

South Dakota

Lab Oven

Asset ID: V2212

Across

Across vacuum oven model AT19. serial # 20209007. Temp range ambient to 480F. Power110v 50/60 Hz single phase, 1500w

Condition

Location

Galaxy lab oven, convection oven 1600W, 120v single. Half size countetop convection oven.

Lab Oven

Asset ID: V2216

Galaxy

Condition

Location

Marvel Scientific Refrigerator Model 3RWWR, S/N 20130912109H. Has 15 inch Undercounter footprint...

Lab Refrigerator

Asset ID: M16

Marvel Scientific

Marvel Scientific Refrigerator Model 3RWWR, S/N 20130912109H. Has 15 inch Undercounter footprint for 3 cu ft capacity: Built for tight laboratory spaces and lab bench integration. Front-venting system: Operates without requiring extra side or top clearance for ventilation. Temperature stability: Engineered to maintain steady storage environments (commonly around 4°C).

Condition

Location

Moisture Analyzer Radwag Model MA 50.R. Maximum capacity 50g, heating with IR emitter....

Moisture Analyzer

Asset ID: 2063

Radwag

Moisture Analyzer Radwag Model MA 50.R. Maximum capacity 50g, heating with IR emitter. Repeatability +/- 0.05% and can read moisture content down to 0.001%. Power supply 100-240 vac 50/60 Hz. Consumption 450W. Physical size 470x380x336 mm, weight 4.8kg pk6020

Condition

### ISCO Syringe Pump ### Model # 100 DM. Serial # 213643. Includes Series D pump controller-...

Location

Northern US

Syringe Pump (100 DM)

Asset ID: V2218

Isco

### ISCO Syringe Pump ### Model # 100 DM. Serial # 213643. Includes Series D pump controller- unit ID # 621240031. Serial # 213562. Pump is in good working condition. See attachment for the manual.

Condition

Location

Tablet or Pill Counter, Automatic. Pharmafill model TCA2-R electric table top pill counter with...

Tablet / Capsule Counter

Asset ID: 8573

Pharmafill

Tablet or Pill Counter, Automatic. Pharmafill model TCA2-R electric table top pill counter with hopper feed and air guide system. Disk 20 inch diameter. This unit electronically counts tablets and capsules of various sizes and shapes at speeds up to 2000 tab/min or 1000 caps/min. Type AD1001-RA. They can be used to count tablets, capsules, caplets, gel caps (hard and soft), and most common solid oral dose type products. They are also used to count cosmetic gel caps and other products with a shape similar to a tablet or capsule

Condition

Location

Hach Laboratory Turbidimeter Model TL2300, tungsten lamp turbidimeter. S/N 2018050C0189. See...

Turbidimeter

Asset ID: M15

Hach

Hach Laboratory Turbidimeter Model TL2300, tungsten lamp turbidimeter. S/N 2018050C0189. See brochure in Links.

Condition

Location

Water Bath - Poly ProBath Model RS-PB-100 S/N 062411E4

Water Bath

Asset ID: M21

Revolutionary Science

Condition

Location

### Biosafety Cabinet Lab Hood Class II Type B1 by Nuaire ### - HEPA Exhaust Filter 11-1/2 inch...

Lab/Fume Hoods

1 Items

Asset

Description

Condition

Location

Biosafety Lab Hood 4 foot Type B1

Asset ID: 8111

Nuaire

### Biosafety Cabinet Lab Hood Class II Type B1 by Nuaire ### - HEPA Exhaust Filter 11-1/2 inch and supply filter 5-7/8 inch - both are 99.99% efficiency on 0.3 microns - Nominal width 4 foot - Inflow fpm 105 fpm, downflow 70 fpm - Touch link control system - Cabinet stainless steel 304L - Includes stand shown in photos Nuaire sterile hood. Series # 66, serial # 181074071917.Manufactured in 2017 and is 115VAC, 60Hz, 1 phase, and 10amps. The NU-427 preserves the Class II Type B1 cabinet’s traditional role of serving as an intermediate option between recirculating and total exhaust cabinets but with a control system fit for modern applications. By exhausting air from the entire length of the back half of the work zone through slots in the back wall, this design not only allows users to continue the recommended practice of working “clean to dirty” and deep inside the work zone but also leaves the dished work surface intact to retain spills. This exhaust is powered by an external facility blower that is interlocked with the cabinet’s own motor through a redundant system to provide two layers of protection that minimize the risk of blowing air out of the cabinet should the external blower fail: cabinet exhaust is monitored by not only a mechanical pressure switch but also a differential velocity pressure-flow grid. A touch screen displays the readings from both this flow grid and a downflow sensor in the work zone at all times for the cabinet operator. Standard models meet the requirements of the respected NSF/ANSI 49 standard for biosafety cabinets. **Two available ( priced separately )**

Condition

Radwag electronic analytical balance scale. Max 220g, min 10mg. Analytical balance, Basic line,...

Location

Vermont

Lab/Scales

2 Items

Asset

Description

Condition

Location

Balance Scale

Asset ID: 8571

Radwag

Radwag electronic analytical balance scale. Max 220g, min 10mg. Analytical balance, Basic line, LCD display, 14-key membrane keypad, ALIBI memory, Readability (g): 0.0001, Min. Sample Weight (g): 0.01, Max. Capacity (g): 220 Product Description: The Radwag Analytical Balance from the Basic line is a precision instrument designed for accurate measurements in laboratory settings. Featuring an LCD display and a 14-key membrane keypad, this balance is user-friendly and efficient. The ALIBI memory function allows for data traceability and record-keeping, ensuring compliance with quality standards. With a readability of 0.0001g, this balance can detect even the slightest changes in weight, making it suitable for demanding applications where precision is crucial. The minimum sample weight of 0.01g ensures that even small quantities can be measured accurately. Despite its sensitivity, the balance has a generous maximum capacity of 220g, providing versatility for a variety of experiments and sample sizes.

Condition

Location

Mettler Toledo Precision Balance Model AB104-S/FACT, S/N 1127392477. The Mettler Toledo...

Precision Balance

Asset ID: M12

Mettler Toledo

Mettler Toledo Precision Balance Model AB104-S/FACT, S/N 1127392477. The Mettler Toledo AB104-S/FACT Analytical Balance is ideal for piece counting, percent weighing, dynamic weighing, or free factor use. Weight output can be read as g, kg, mg, carat, etc. Max capacity 110 g, readability 0.1 mg. Has glass draft shield with sliding doors. See brochure in Links.

Condition

Location

CD Case Feeder; pneumatic on turn table; Manufactured by EAM

Packaging

6 Items

Asset

Description

Condition

Location

CD Case Feeder

Asset ID: E2363

EAM

Condition

Location

Chain Wheel / Sprocket 0002091838 1-703-29-038-0 for Krones labeler

Chain Wheel Sprocket, Labeler

Asset ID: O50

Krones

Condition

Location

ITW Dynatec, Dyna Pack (Hot Glue), 4-line capability currently equipped w/ two (2) programmable...

Dyna Pack (Hot Glue)

Asset ID: 6150

ITW Dynatec

ITW Dynatec, Dyna Pack (Hot Glue), 4-line capability currently equipped w/ two (2) programmable heads (6 ft hose, Part # N2306, Serial No. 93468, 230 Volt), TPC-9 controller, Model No. 114231, S.N. 281382, 120-volt 6 Watt (adjustable delay, length of bead, skip, repeat). Was bought new in 2013

Condition

Location

Reject Station: Includes Proximity Switch, Air Knife, control box, and tripod stand on wheels -...

Reject Station

Asset ID: E2360

Prox switch

Reject Station: Includes Proximity Switch, Air Knife, control box, and tripod stand on wheels - triggers a switch when metal is in close proximity. Last used to detect if CD's were in cases. If a CD was in the case, it would be blown off the line. Includes stand.

Condition

Location

Reject Station: Includes Proximity Switch, Air Knife, control box, and tripod stand on wheels -...

Reject Station Proximity Switch

Asset ID: E2361

Turck

Reject Station: Includes Proximity Switch, Air Knife, control box, and tripod stand on wheels - triggers a switch when metal is in close proximity. Proximity switch is Turck BC20-Q20-AN4X2. Last used to detect if CD's were in cases. If a CD was not in the case, it would be blown off the line. Includes stand. Qty (5) of these available, priced separately

Condition

Location

Weldotron heat tunnel - Model 7121 S/N FW93271, 220 V, 35 amps, 1 Phase; Motor: 115V, 1 phase,...

Shrink Tunnel

Asset ID: E2355X

Weldotron

Weldotron heat tunnel - Model 7121 S/N FW93271, 220 V, 35 amps, 1 Phase; Motor: 115V, 1 phase, 0.75 amp, 1/15 HP. Dimensions: 74"L x 34"W x 61"H. Tunnel passage width: 16" and height: 8". Versatile shrink tunnel designed to produce complete, uniform shrink on a wide range of product sizes and shapes.

Condition

Location

## Pearson Bag Inserter## Pearson BI18 Bag Inserters open, insert, and cuff plastic bags from...

Packaging/Bag Inserter

2 Items

Asset

Description

Condition

Location

Bag Inserter

Asset ID: 5978

Pearson

## Pearson Bag Inserter## Pearson BI18 Bag Inserters open, insert, and cuff plastic bags from roll stock into a wide variety of corrugated cases at speeds up to 18 cases per minute. Equipped with bag opening carriage with vacuum cup assist, four corner cuffing rods and single head bag inserting head, PLC controller, vacuum pump, safety guarding and e-stop. Inserts pre-performed roll stock or gusseted bag stock into cases, filling all corners and cuffing the bag around the outer perimeter. Has a 36" web width with a 1-1/2" diameter spool. Has an Allen Bradley SLC 5/01 PLC. Advanced design features guarantee smooth and precise bag placement and handling. - Uses poly roll bags - Set up for 50# cube 12" x 12" x 12" box but can be adjusted. Size range L 9.5-24", W 9.5-17", H 10-24" - Believed to be Model BI-18. Serial number 200119289647, - 3HP 460/3/60 - Built 2001. Idled early 2017. - In warehouse - ready to load Part of a complete 50# cube filling line (Asset 5976) but will be sold separately. For a list of all components for this line - enter "5976cube" in search box. For a list of all components for this line - enter "5976cube" in search box.

Condition

Location

## Bemis Automatic Poly Bag Inserter ## Separates a poly bag from a roll of perforated and...

Bag Inserter

Asset ID: R3550

Bemis

## Bemis Automatic Poly Bag Inserter ## Separates a poly bag from a roll of perforated and sealed poly bags, then opens the bag and inserts the bag into a formed and bottom sealed case, and cuffs the top of the bag over the vertical top flaps of the case. Includes belt case conveyor Bemis Model 1575H, automatic bag inserter capable of speeds from 5 to12 cpm – speeds depending on material and application. Case size range: 8" to 20" in Length x 4" to 16" in Width x 10" to 22" in depth with bag gauge of 1-1/2 to 3 mil low density, 10-3/4" max roll diameter, 27-1/2" max roll width. Length of bag cuff overlay-depth and width is 5" to 7". Unit equipped with an Allen Bradley plc controller. Automatically selects a gusseted or flat tube polyethylene bag from a roll of perforated stock and inserts the bag into an erected corrugated container. Roll stock support accommodates two rolls of poly bags and quick roll change. Was in operating condition when idled and removed early 2025.

Condition

Location

## Fowler Zalkin Automatic Capper with Cap Hopper & Feeder ## - Single head inline capper....

Packaging/Capper

2 Items

Asset

Description

Condition

Location

Capper

Asset ID: R3502

Fowler Zalkin

## Fowler Zalkin Automatic Capper with Cap Hopper & Feeder ## - Single head inline capper. Includes stainless cap hopper, elevator, sorter, and chute. - Set for 63mm caps but can run a variety of caps from 32mm with change parts (not included). Screw on type cap with induction heat seal liner - Flex plastic conveyor belt, 8" wide through the capper - Infeed plastic flex conveyor with 90 degree approx 12" wide, and outfeed plastic flex conveyor with 90 degree approx. 12" wide - Operators panel, Job #92099-A, ser FZ749 This is a complete capper, recently removed in early 2026 and store in a van trailer. Line speed 18 cpm on 35# jugs and 11 cpm on 17.5 lb jugs. Installed in 1992, Idled in early 2025 - scheduled for removal in May 2025. Ready for immediate shipment **For more details on all components of the Jug In Box line (JIB Line), enter R3500 in search box**

Condition

Location

### SureKap Capper SK6000-18.### Fully automatic straight line six-spindle capper capable of...

Capper Torquer

Asset ID: 8562

SureKap

### SureKap Capper SK6000-18.### Fully automatic straight line six-spindle capper capable of running up to 90 caps per minute depending on cap diameter. Can handle cap sizes up to 48mm/CRC and 53mm/400. - Does not include cap hopper, chute, or cap feeder assembly. Caps were placed manually - Incudes bottle transport conveyor with Delrin table top and a VFD for speed control Motor is 1HP. - Machine is idle now but was running 22mm dropper caps, manually placed. Manual available

Condition

## Pearson Case Erector ## Automatic case erector for knock-down (KD) cases with magazine and...

Location

Conifer, Colorado

Packaging/Case Erector

2 Items

Asset

Description

Condition

Location

Case Erector

Asset ID: 5977

Pearson

## Pearson Case Erector ## Automatic case erector for knock-down (KD) cases with magazine and hot melt bottom glue system. Set up for Left Hand (LH cases) - we have drawing - Model CE-235 serial 200102359572, machine number 9572 - Rated speeds up to 35 cases / minute. - Feed from right to left when standing in front of machine name and electrical panel - Includes Probilt hot melt glue system, part No. D100-644, serial No. 3551211272 - Was erecting KD cases for 50# cubes 12" x 12" x 12" but can be adjusted. - Case size range: Can adjust to handle cases from 5 to 30" long, 5.5 to 16" wide and 3.5 to 24" tall - Driven by 1.5 HP motor 460/3/60 - In warehouse - ready to load Part of a complete 50# cube filling line (Asset 5976) but will be sold separately. Entire line idled in 2017. Removed, stored, ready to ship. For a list of all components for this line - enter "5976cube" in search box.

Condition

Location

**Moen Bliss Type Case Erector** Designed for 2 part case for bag in box. Model PF106-TPB,...

Case Erector

Asset ID: R3401

Moen

**Moen Bliss Type Case Erector** Designed for 2 part case for bag in box. Model PF106-TPB, serial 1867. Idle in early 2025 - still installed. The Model PF106-TPB two-piece bliss former glues a bliss liners to a bliss body wrap, resulting in a shipping case with a double laminated bottom and an integral structure for top-to-bottom strength and box rigidity For bag-in-box applications, the two-piece bliss box can be formed with an FOL style top closure and then palletized on the side of the box, allowing the user to utilize the double laminated bottom and the double laminated top closure as vertical stacking members. The PF106-TPB can be changed over to accommodate a range of box sizes with a change over time of 30 min. **For more details on all components of this line, enter R3400 in the search box**

Condition

Location

Pearson case sealer - hot melt top sealer. Model CS25-T, serial number 2006CS2511021. Equipped...

Packaging/Case Sealer

3 Items

Asset

Description

Condition

Location

Case Sealer

Asset ID: R3403

Pearson

Pearson case sealer - hot melt top sealer. Model CS25-T, serial number 2006CS2511021. Equipped with top flap closers and plows, Allen Bradley touch screen controls, Nordson Problue 7 hot melt unit and guns. Pearson’s CS25 Case Sealers top seal a wide range of case sizes with either pressure-sensitive tape or hot melt adhesive at speeds of 25 to 42 cases per minute depending on case length. All of Pearson Packaging’s case sealers are designed to accommodate a wide range of box styles and sizes for production rates spanning from low to high-speed. Case size range: 8" to 24" in Length; 5" to 16" in Width, 4¾" to 18½" in Depth. Ready to ship **For more details on all components of this line, enter R3400 in the search box**

Condition

Location

Case bag uncuffer and sealer. Model PDUC-UFC, sn 4374. Uncuffs poly bag from 50# cube box,...

Case Sealer Uncuffer

Asset ID: 5980

SV Dice

Case bag uncuffer and sealer. Model PDUC-UFC, sn 4374. Uncuffs poly bag from 50# cube box, folds bag in, tamps it down, and seals top with hot melt glue. Missing hot melt unit and plc from control panel - manufacturer still supports this machine. Part of a complete 50# cube filling line. For a list of all components for this line - enter "5976cube" in search box.

Condition

Used - Fair

Location

Case Sealer/Carton Taper, The Loveshaw Corporation, Model 304/19, S.N. 159183300, 110 Volt, 9.6...

Case Sealer/Taper

Asset ID: 6155

Loveshaw Corporation

Case Sealer/Carton Taper, The Loveshaw Corporation, Model 304/19, S.N. 159183300, 110 Volt, 9.6 Amp. Top & Bottom Sealing Heads, 2 in. x 6 ft. Side Pull Belts, Product Loading “anvil”, unit currently has Lincoln Coder, Model 90-2L-I

Condition

Location

Videojet 1550 (#3), Ink Jet Coding Machine, EXCEL Format, 120/240 Volt, 1Ph., 3 Amp, Serial No....

Packaging/Coder

1 Items

Asset

Description

Condition

Location

Ink Jet Coder

Asset ID: 6158

Videojet

Videojet 1550 (#3), Ink Jet Coding Machine, EXCEL Format, 120/240 Volt, 1Ph., 3 Amp, Serial No. 1404109C29ZH, Part No. 39582-793-01, w/infrared Fiber Optic Photocell (proximity), O.E.M. Mobile Stand, O.E.M. Static Printhead Stand. Running.

Condition

Location

### Rapak Bag Former-Filler ### Rapak bag-in-box liquid filler with bag feeder. Designed for 10...

Packaging/Filler - Liquid & Viscous

5 Items

Asset

Description

Condition

Location

Filler, Liquid Bag-In-Box

Asset ID: R3402

Rapak

### Rapak Bag Former-Filler ### Rapak bag-in-box liquid filler with bag feeder. Designed for 10 bags per min with a 17.3 L bag . Single nozzle, bag former - bag has nozzle built in with cap. Filler retracts cap, fills, and replaces nozzle cap and seats it, Stainless steel. Idled in early 2025 - still installed Autokap™ 1200 Single-Head Fully-Automatic Filling Machine. This machine is a model 1270E automatic edible oil filler. This high-speed filler is designed to fill 1.5 - 20 L (0.5 - 5 gal.) bags through a 25mm nozzle. Fill rate based on supply at 6 litres/sec at 2 bar pressure. All product contact surfaces conform to USA 3A Dairy Standards. - Touch screen controls - Stainless steel supply tank, approx 25 gallons - Centrifugal feed pump - Delrin conveyor Production output capability 5L (0.5 gal.) bags at up to 17 bags/min 3L (1 gal.) bags at up to 16 bags/min 5L (1.5 gal.) bags at up to 14 bags/min 10L (2.5 gal.) bags at up 11 bags/min 20L (5 gal.) bags at up to 9 bags/min **For more details on all components of this line, enter R3400 in the search box**

Condition

Location

## Thiele 5-Nozzle Jug Filler with ss Surge Tanks and Pump ## **Food Grade** Thiele positive...

Liquid Filler

Asset ID: R3501

Thiele

## Thiele 5-Nozzle Jug Filler with ss Surge Tanks and Pump ## **Food Grade** Thiele positive displacement filler with centrifugal pump feed system - all controls - Stainless steel surge tank approx 75 gallons with centrifugal feed pump, filters and manifold - Positive displacement individual piston control filling to five nozzles - nozzle bore approximately 2" - Includes all controls and photo-eyes - Delrin flex transport belt through filler - Live roller feed to filler - approx 16" wide x 20 ft long - Stainless steel sanitary dust covers Was running 2.5 gallons and 5 gallon jugs of liquid vegetable oil filling Jug in Box. **For more details on all components of the Jug In Box line (JIB Line), enter R3500 in search box**

Condition

Location

### Bulk viscous material filler - 4 head ### Rated at 8 to 10 cases per minute depending on...

Pail Filler - 4 Head Stainless

Asset ID: 7621

Shambaugh & Sons

### Bulk viscous material filler - 4 head ### Rated at 8 to 10 cases per minute depending on viscosity. For viscous material including shortening and margarine. Stainless steel filler with controls, load cells, and 4 conveyors. Infeed pipe to ss fill nozzles is 2: carbon steel. Uses 4 Mettler Toledo load cells - controls included. Has 2 automatic ss ball valves an 4 air operated ss modulating valves at nozzles. Includes 4 conveyor sections on load cells - Mettler controls in panel over Rice Lake model BM1818S-200, capacity 200 lbs each load cells). Can also fill, 25# cube boxes, 50 # cube boxes, 5 gallon (35 lb) pails, 25 kg boxes. Could be adapted for gallon and 1/2 gallon containers and smaller. Stainless so can be used with margarine, butter, or any other viscous product. Filler control panel measures 3 ft x 7 ft x 1 ft deep. Will have to be reprogrammed. In warehouse - ready to load

Condition

Location

Filler for 50# cubes - 2 heads. Stainless steel, automatic valves, extrusion valve for...

Pail Filler - Case Filler Viscous Fluid

Asset ID: 5942

Filler for 50# cubes - 2 heads. Stainless steel, automatic valves, extrusion valve for shortening or margarine. Two load cells Mettler Toledo, Model IND131, Max load 50kg. Controlled by Allen Bradley touch screen Panelview 1500. Has Allen Bradley Compact Logix plc. Will require re-programming of the logic. Includes Little David Microjet coder and Diagraph IV700 case coder. Capacity 5 to 8 cases per minute depending on viscosity. This is a weigh filler controlled by Mettler load cells. Last used to fill boxes of margarine (12" x 12" x 12") but can handle any viscous fluid. Part of a complete 50# cube filling line. Built 2001. Idled early 2017. Removed, stored, ready to ship. For a list of all components for this line - enter " 5976cube " in search box.

Condition

Location

Neupak Weigh Master Pail Fille 2 nozzle Neupak with load cell control for viscous liquids (no...

Pail Filler, Liquid - Stainless

Asset ID: 7622

Neupak Weigh Master

Neupak Weigh Master Pail Fille 2 nozzle Neupak with load cell control for viscous liquids (no load cells included). Stainless steel piping and nozzles. Was last used for filling 5 gallon shortening pails but can handle other size pails or boxes. Controls included in separate control cabinet with Allen Bradley plc SLC 504 CPU. Serial # M65301. Unit is in 2 pieces. Shipping sizes: filler 32 x 48 x 80 inches tall, control cabinet 40 x 48 x 96 inches tall.

Condition

Location

LOCK inspection Systems, Met 30+, 3 1/2 in. x 14 in. aperture mounted on conveyor last used with...

Packaging/Metal Detector

2 Items

Asset

Description

Condition

Location

Metal Detector

Asset ID: 6152

LOCK Inspection Systems

LOCK inspection Systems, Met 30+, 3 1/2 in. x 14 in. aperture mounted on conveyor last used with a V/f/f/s machine. Conveyor is 12 in x 10 ft. long horizontally-transitioning to 68 inch long incline where the metal detector is located. Intralox modular conveyor belt. Horizontal section is 6 inches above floor and raises to discharge height of 40 inches. Currently using 1.5 MM NFe, 1.2 MM Fe, 2.0 MM SS

Condition

Location

Eriez Flow Through Metal Detector. Model EZ-DSP7.25LPVR, Style 9911198. Serial...

Metal Detector

Asset ID: 5072

Eriez Manufacturing Co.

Eriez Flow Through Metal Detector. Model EZ-DSP7.25LPVR, Style 9911198. Serial #191777 Approximate 6” diameter tube with diverter valve. Mounted on a stainless steel frame

Condition

Location

## Filling line for 50lb or 25lb cube boxes ## Stainless steel filler last used for margarine...

Packaging/Packaging Line

4 Items

Asset

Description

Condition

Location

50 lb Cube Filling Line - stainless

Asset ID: PK-5976

## Filling line for 50lb or 25lb cube boxes ## Stainless steel filler last used for margarine filling. Can be adjusted for other size boxes down to 25 lb. This is an automatic line. Control by Allen Bradley Control Logix plc (filler will have to be re-programmed). Can also be used for any viscous material including shortening. Rate was between 5 to 8 cases per minute depending on viscosity (if filling 50# boxes, rate would be 24,000 #/hr). Includes: - Pearson case erector for LH KD cases, asset 5977 - Pearson bag inserter using roll bags, asset 5978 - Stainless 2-spout filler on Mettler Toledo load cells, asset 5942 - SV Dice uncuffer case sealer (missing plc and hot melt unit) asset 5980 - Interconnecting conveyors. Line built 2001 - ran until early 2017. In warehouse - ready to load. See marketing flyer in Links. We have a dimension drawing for all major pieces. (5976Layout.pdf). For a list of all components for this line - enter "5976cube" in search box.

Condition

Location

## Bag In Box (BIB) Line ## Packaging line for filling 35 pound fluid. This line consists of...

Bag In Box Packaging Line BIB

Asset ID: PK-7500

## Bag In Box (BIB) Line ## Packaging line for filling 35 pound fluid. This line consists of the case erector, filler, and case sealer plus the interconnecting roller/belt conveyors. Installed footprint 88 ft x 13 ft but can be configured differently. - **Case Erector** - Moen PF106-TPB two piece Bliss case former. For more details - see asset R3401 - **Filler** - Rapak bag in box filler.with bag former/inserter. Single nozzle automatic bag filler. Includes Delrin conveyor through filler in a U shape pattern. For more details see R3402 - **Case Sealer** - Pearson N401-G case sealer. For more details see asset R3403 - Belt conveyor on rollers - interconnecting conveyors - see drawing.- Stainless steel surge tank approx 25 gallons with centrifugal filler pump. **For more details on all components of this line, enter R3400 in the search box**

Condition

Location

## JIB Line, Complete. Fills 17.5 lb or 35 lb Jug-In-Box ## This is a complete line, removed...

JIB Line Jug-In-Box

Asset ID: PK-3500

## JIB Line, Complete. Fills 17.5 lb or 35 lb Jug-In-Box ## This is a complete line, removed inn early 2026 and stored in two van trailers - ready to deliver. Line speed 18 cpm on 35# jugs and 11 cpm on 17.5 lb jugs. Installed in 1992, Idled in early 2025 - ready for removal and loading. Ready for immediate shipment - Thiele 5 nozzle filler with, all controls. Positive displacement piston control. Nozzle opening 2 inch - Stainless steel surge tank, pump - Fowler Zalkin FTM200 Capper and cap feeder. Single head automatic for 63mm caps. Includes infeed and outfeed conveyors - All interconnecting conveyors, photo-eyes, controls. Very long in-feed and out-feed conveyors - live rollers **For many more details and photos on all components of the Jug In Box line (JIB Line), enter R3500 in search box**

Condition

Location

### Tincture Filling Line ### Complete tincture filling line for bottles of liquid. For 15ml and...

Tincture Bottle Filling Line

Asset ID: 8330

China

### Tincture Filling Line ### Complete tincture filling line for bottles of liquid. For 15ml and 30ml sizes (running 0.5 oz and 1 oz Boston Round Bottles). - Includes feed & offtake tables, dual station filler with capper Model FC-4100, labeler Model LR3000. HMI touchscreen controls. - Speeds from 20 bpm to 30 bpm - Can run other sizes if they fit under filling nozzle - Four filler wheels (large white stars shown in photos) included for various bottles - Other change parts can be ordered from US supplier if your bottle is different Made in China but sourced from DupreSolutions in Vermont who also serviced the line. Please see the manual in Document Link. Used very little - in excellent shape

Condition

Used - Excellent

Location

Vermont

Packaging/Palletizer & Stretch Wrapper

1 Items

Asset

Description

Condition

Location

Palletizer

Asset ID: 8860

Columbia Okura

## Columbia Okura A1600 4-Axis Robot Palletizer ## This is in good working condition and there...

## Columbia Okura A1600 4-Axis Robot Palletizer ## This is in good working condition and there were no issues with it at the time of replacement. Installed in 2003 and replaced in 2024. The main cable and one servo motor were replaced soon before removing the palletizer from service. This was serviced and maintened regularly. It was last used to stack 50 lb feed bags running approximately 10 tons per hour. Controls are included. The cables to the robot were cut and will need to be replaced. ### Key Features of the A1600 Palletizer ### Modular, Compact Design Unlike bulky traditional palletizers, the A1600 features a space-saving footprint (as small as 6.5m²). Its modular configuration adapts to low-ceiling facilities and tight spaces, making it ideal for retrofitting older warehouses. ### High-Speed Precision Palletizing ### With a top speed of 1,600 cycles per hour and a payload capacity of 40kg, the A1600 handles everything from food-grade boxes to pharmaceutical cases with sub-millimeter accuracy. Advanced servo motors and anti-vibration algorithms ensure gentle product handling, even at peak speeds. ### Transformative Gripper Versatility ### The A1600’s proprietary Quick-Change Gripper System supports vacuum, clamp, hybrid, and custom EOATs (End-of-Arm Tooling). In testing, it transitioned between beer kegs and fragile cosmetic boxes in under 90 seconds—game-changing for mixed-SKU environments. ### Plug-and-Play Integration ### Columbia Okura’s CO-Pilot software syncs seamlessly with ERP/WMS platforms (SAP, Oracle) via OPC-UA and Ethernet/IP protocols. Setup time for basic pallet patterns averaged just 38 minutes in our trials, thanks to its drag-and-drop interface. ### Self-Diagnostics + Predictive Maintenance ### Built-in IoT sensors monitor motor wear, belt tension, and vacuum pressure, flagging issues 2–3 weeks before failure.

Condition

### Bartelt Form Fill Seal Packager ### - Model RH IM 7-12 (7 inch-12 station) w/All Fill B...

Location

Iowa

Packaging/Vertical Form Fill

3 Items

Asset

Description

Condition

Location

Bartelt Form Fill Seal Packager

Asset ID: 6125

Bartelt HMC

### Bartelt Form Fill Seal Packager ### - Model RH IM 7-12 (7 inch-12 station) w/All Fill B 350E auger filler - E.M.P. registration control unit - Equipped with side seal embossing and mechanical hole punch - Machine No. 580 - Idled in 2018 - still installed in protected area. We will remove and load for no charge It has the position for a second filler head. We have run an additional auger filler in that position as well as a volumetric filler in that position. Tear notch and various types auger tooling setups also available separately. Choose from 2 in., 3 1/2 in., 4 in., or 6 in. bag clamps. Very reliable packager. 3 phase 208-220/440 VAC. Selling because of production shut down.

Condition

Location

### Bartelt horizontal form, fill, and seal Packager ### - Model RH IM 6-7 (6 inch-7 station)...

Bartelt Form Fill Seal Packager

Asset ID: 6126

Bartelt HMC

### Bartelt horizontal form, fill, and seal Packager ### - Model RH IM 6-7 (6 inch-7 station) w/B Filler - Tritronics registration unit (Color Mark II, Model CMS 2B) - Last ran 60 packages per minute on 1-gram fill - Machine No. 336 Smooth/quiet running machine. 3 phase 208-220 VAC. Selling because of production shut down. Price includes loading on your truck - crating extra. Auxiliary equipment such as embossing and various types auger tooling setups available separately.

Condition

Location

### Like New Vertical Form Fill & Seal Machine (VFFS) ### by Prodo-Pak. Tested - never used in...

Vertical Form Fill Machine VFFS

Asset ID: 1085

Prodo-Pak

### Like New Vertical Form Fill & Seal Machine (VFFS) ### by Prodo-Pak. Tested - never used in production. VFF. - One Model 4S 3P 320 line 3-lane with Laser etching printer. Fill rate at 150 to 180 pouches/minute. Machine Size 7.5 ft x 7.5 ft x 9 ft tall 5,000 pounds - Fill volume 1.0 to 3.0 ml. Pouch width 1.5 inches, pouch length 3.0 inches - Was set up for filling semi-viscous gel products 1,000 to 5,000 centipoise into four sided seal pouches. Last used for hand sanitizer packets or sachets. Includes the following additional pieces: - Pump skid 80 inch x 48 inch x 60 inch tall 600 pounds - Video Jet laser printer 7 ft x 7 ft x 77 inch tall 700 pounds. - Video Jet fumes extractor 4 ft x 4 ft x 5 ft tall 300 pounds. See LINKS for specifications.

Condition

Like New

Location

New Jersey

Pump

45 Items

Asset

Description

Condition

Location

Biodiesel Loadout Pump

Asset ID: BD-1507

Biodiesel loadout pump

Condition

Location

Teikoku Canned Motor Pump F60-3211N4BL-0408SF1-AV, S/N 2016006025, 110 GPM, 214 TDH, Driven by...

Can Pump

Asset ID: P-1006

Teikoku

Teikoku Canned Motor Pump F60-3211N4BL-0408SF1-AV, S/N 2016006025, 110 GPM, 214 TDH, Driven by 16.6 HP, 460 volts, 60 Hz, 3 phase. Last used as Dow X Water Pump

Condition

Location

Teikoku 22 GPM, 155 Ft, 10 HP, 3600 RPM, 14.5 FLA. SN 4014004318 Last used as FD Dryer Feed pump.

Can Pump

Asset ID: P-102

Teikoku

Condition

Location

Teikoku canned motor pump 7 GPM, 148 ft. hd.F41-217U4L-0204S1-AV, S/N FG-1378A, 36.4 GPM, 148...

Can Pump

Asset ID: P-107

Teikoku

Teikoku canned motor pump 7 GPM, 148 ft. hd.F41-217U4L-0204S1-AV, S/N FG-1378A, 36.4 GPM, 148 Ft,3.1 HP, 3450, RPM, 7.5 Fla

Condition

Location

Teikoku Canned Motor Pump F60-3211N4BL-0204F1-AV, s/n 2014004324, 22 GPM, 103 Ft, 5.3 HP, 3600...

Can Pump

Asset ID: P-201

Teikoku

Teikoku Canned Motor Pump F60-3211N4BL-0204F1-AV, s/n 2014004324, 22 GPM, 103 Ft, 5.3 HP, 3600 RPM, 8 Fla. Last used as Filtered FD Feed Pump

Condition

Location

Flowserve Innomag Feed pump 10 HP, 460 volts, 60 Hz, 3 phase with VFD. 1.5x1x8 inches. ...

Can Pump

Asset ID: P305

Flowserve

Flowserve Innomag Feed pump 10 HP, 460 volts, 60 Hz, 3 phase with VFD. 1.5x1x8 inches. BM69011100-BCO, Serial 69400, 6.9 inch imp. Diameter. Last used as Methanol Daty Tank Feed Pump

Condition

Location

Teikoku Feed pump F60-3211N4BL-0204SF1-AV, S/N 2014004326, 15 gpm, 166 Ft. Hd, Driven by 5.3 HP,...

Can Pump

Asset ID: P-502

Teikoku

Teikoku Feed pump F60-3211N4BL-0204SF1-AV, S/N 2014004326, 15 gpm, 166 Ft. Hd, Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase, with VFD motor. Last used as ME Dryer Feed pump

Condition

Location

Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004319,20 gpm, 160 Ft. Hd., Driven by 5.8...

Can Pump

Asset ID: P-505

Teikoku

Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004319,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as ME Dryer Drain pump

Condition

Location

Teikoku F60-3215N4BL-0204SF1-AV, S/N 2014004320 pump, 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD....

Can Pump

Asset ID: P-508

Teikoku

Teikoku F60-3215N4BL-0204SF1-AV, S/N 2014004320 pump, 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Post E Dryer Flash Vessel Drain pump

Condition

Location

Teikoku 3.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as PW Feed pump

Can Pump

Asset ID: P-509

Teikoku

Condition

Location

Teikoku feed pump 15 GPM, 180 ft. hd., driven by 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. ...

Can Pump

Asset ID: P-703

Teikoku

Teikoku feed pump 15 GPM, 180 ft. hd., driven by 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Feed pump

Condition

Location

Teikoko Reboiler pump F41-41TU4L-0608T1-AV, S/N FG-1382A, 22.8 HP, 460 volts, 60 Hz, 3 phase. ...

Can Pump

Asset ID: P-705

Teikoku

Teikoko Reboiler pump F41-41TU4L-0608T1-AV, S/N FG-1382A, 22.8 HP, 460 volts, 60 Hz, 3 phase. Last used as Reboiler pump

Condition

Location

Teikoko Reflex pump 25 GPM, 169 ft. Hd., F60-3315N4BL-0204TF1-AV, S/N 2014004322, 16.6 HP, 460...

Can Pump

Asset ID: P-709

Teikoku

Teikoko Reflex pump 25 GPM, 169 ft. Hd., F60-3315N4BL-0204TF1-AV, S/N 2014004322, 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Reflex pump

Condition

Location

Teikoku Feedpump F64-215C4BM-0405S1V-AV, S/N CV-4637-2

Can Pump

Asset ID: P801

Teikoku

Condition

Location

Teikoku Feed pump 150 GPM, Driven by 1HP, 460 volts, 60 Hz, 3 Phase. Last used as Feed pump

Can Pump

Asset ID: P-807

Teikoku

Condition

Location

Teikoku Reboiler pump FA41-316X4M-0608R1V-AV, S/N CK-2744, 10.1 HP, 460 volts, 60 Hz, 3 phase. ...

Can Pump

Asset ID: P-808

Teikoku

Teikoku Reboiler pump FA41-316X4M-0608R1V-AV, S/N CK-2744, 10.1 HP, 460 volts, 60 Hz, 3 phase. Last used as Reboiler pump

Condition

Location

Sulzer Pump CPT 21-3, No 100132829, 2725 RPM. Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase with...

Can Pump

Asset ID: P-B100

Sulzer

Sulzer Pump CPT 21-3, No 100132829, 2725 RPM. Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as B100 Loading Station Pump

Condition

Location

Sulzer centrifugal pump CPT22-1 LF, SN 100131477, 31.6 GPM, 109.9 ft hd, 6.5. Driven by 5 HP,...

Centrifugal Pump

Asset ID: P-109

SULZER

Sulzer centrifugal pump CPT22-1 LF, SN 100131477, 31.6 GPM, 109.9 ft hd, 6.5. Driven by 5 HP, 1770 RPM, 460 Volts, 60 Hz, 3 phase. Last used as FD DE Vessel Drain pump

Condition

Location

Sulzer Centrifugal pump CPT-23-1B, S/N 100131147, 40 GPM, 120 Ft. Hd. Driven by 7.5 HP, 460...

Centrifugal Pump

Asset ID: P-112

SULZER

Sulzer Centrifugal pump CPT-23-1B, S/N 100131147, 40 GPM, 120 Ft. Hd. Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase motor. Last used as VLF Feed pump

Condition

Location

Dean pump 4x6x10 S/N 196598, 1320 GPM at 195 head, TECO 100 HP, 3650 RPM motor

Centrifugal Pump

Asset ID: BDPC-158

Dean Pump

Condition

Location

Centrifugal Pump 3x4x8 RA3146 Dean pump Division S/N 175506, 235 ft Head, 490 GPM, 3500 RPM,...

Centrifugal Pump

Asset ID: P-1003

Dean Pump

Centrifugal Pump 3x4x8 RA3146 Dean pump Division S/N 175506, 235 ft Head, 490 GPM, 3500 RPM, Impeller 7-7/8. Driven by 60 HP, 3550 RPM, 60 Hz Motor. Last used as DowX NF Pump

Condition

Location

Centrifugal Pump CPT31-6 Sulzer 100133882 8x6x13, 120 ft Head, 1500 USGPM, 1770 RPM Driven by 75...

Centrifugal Pump

Asset ID: P-1005A

Sulzer

Centrifugal Pump CPT31-6 Sulzer 100133882 8x6x13, 120 ft Head, 1500 USGPM, 1770 RPM Driven by 75 HP, 1770 RPM, 60 Hz Motor. Last used as Cooling Tower Pump

Condition

Location

Centrifugal Pump CPT31-6 Sulzer 10013390, 1500 GPM, 120 Ft Hd. Driven by 75 HP, 1800RPM, 460...

Centrifugal Pump

Asset ID: P-1005B

Sulzer

Centrifugal Pump CPT31-6 Sulzer 10013390, 1500 GPM, 120 Ft Hd. Driven by 75 HP, 1800RPM, 460 volts, 60 Hz, motor. Last used as Dow X Water Pump

Condition

Location

Sanitary pump with explosion proof motor. Turbine pump for negative NPSH pressure to negative...

Explosion Proof Pumps (4)

Asset ID: 8576

China Zhejiang Yuanya Pump Co.

Sanitary pump with explosion proof motor. Turbine pump for negative NPSH pressure to negative pressure 0.09 Mpa. Pump rated at 1 MT/hr at 30 m head (4.6 gpm at 98.4 ft TDH). Pump inlet/outlet 51mm/38mm. All stainless steel 316L. Motor is 2.2 KW (3 HP) at 3410 rpm 460v 3/60. Quantity (4) - priced separately

Condition

Location

Teikoku F60-3211N4BL-0204SF1-AV, S/N 2015004881 Pump 20 GPM, 92 Ft, 5.3 HP, 3600 RPM, 8.0 FLA

Feed Pump

Asset ID: P304

Teikoku

Condition

Location

Teikoku F60-3115N4BL-02045G1-AV, S/N 2014004327 Pump 20 GPM, 92.4 Ft, 3.3 HP, 3600 RPM, 5.5 FLA

Feed Pump

Asset ID: P-404

Teikoku

Condition

Location

Busch Vacuum pump LB0063A AMB XX IX,4 GPM, Driven by 7.5 HP, 1800 RPM, 38 ACFM 5.5 FLA, 28.9 in...

Liquid Ring Pump

Asset ID: P116

BUSCH

Busch Vacuum pump LB0063A AMB XX IX,4 GPM, Driven by 7.5 HP, 1800 RPM, 38 ACFM 5.5 FLA, 28.9 in HG. Last used as FD Dryer Vacuum Pump

Condition

Location

Busch vacuum pump 3.0 HP, 460 volts, 60 Hz, 3 phase. Last used as FD Filter Vacuum System

Liquid Ring Pump

Asset ID: P-111A

BUSCH

Condition

Location

Busch Vacuum Pump Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase. S/N 600015607/1Last used as ME...

Liquid Ring Pump

Asset ID: P-507

BUSCH

Busch Vacuum Pump Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase. S/N 600015607/1Last used as ME Recovery Vacuum System

Condition

Location

Viking positive displacement pump by Central State Group, 20 GPM, 160 Ft. Hd.,...

PD Pump

Asset ID: P-922

Viking

Viking positive displacement pump by Central State Group, 20 GPM, 160 Ft. Hd., F60-3215N4BL-0204SF1-AV, S/N 2014004317, . 25 HP, 460 volts, 60 Hz, 3 phase. Last used as Glycerin Unloading Pump

Condition

Location

Sulzer Pump model CPT23-1B designed for Capacity 150 gpm @ 99 Head. 1770 RPM. No. 100131479. ...

PD Pump

Asset ID: P115

SULZER

Sulzer Pump model CPT23-1B designed for Capacity 150 gpm @ 99 Head. 1770 RPM. No. 100131479. Driven by 7.5 HP motor 1800 rpm. Last used as FD Loading Pump.

Condition

Location

Viking Positive displacement pump 10.3 GPM, 218.8 Ft, 3 HP, 28 ft Net positive suction head,...

PD Pump

Asset ID: P-214

Viking

Viking Positive displacement pump 10.3 GPM, 218.8 Ft, 3 HP, 28 ft Net positive suction head, suction pressure 25.4 psi. Last used as Sweet water drain pump

Condition

Location

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. ...

Plunger Pump

Asset ID: P-303

CAT Pump

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as FFA HP Feed Pump.

Condition

Location

DXP Cat Pump 1DXM75627,10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last...

Plunger Pump

Asset ID: P-203

CAT Pump

DXP Cat Pump 1DXM75627,10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as FD HP Feed Pump

Condition

Location

DXP Cat Pump 1DXM7562T, 10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last...

Plunger Pump

Asset ID: P-207A

CAT Pump

DXP Cat Pump 1DXM7562T, 10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as PW HP Feed pump

Condition

Location

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. ...

Plunger Pump

Asset ID: P-405

CAT Pump

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as Methanol Super-2 HP Feed Pump.

Condition

Location

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. ...

Plunger Pump

Asset ID: P-307

CAT Pump

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 Material 316 SS. Last used as Methanol Super-1 HP Feed Pump.

Condition

Location

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. ...

Plunger Pump

Asset ID: P-402A

CAT Pump

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as Methyl Ester HP Feed Pump.

Condition

Location

Pump 41 GPM, 92 Ft, 4.6 HP, 3500 RPM, 7.5 Fla, Last used as Biodist. Feed Pump

Pump

Asset ID: P120

Condition

Location

Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004312,20 gpm, 160 Ft. Hd., Driven by 5.8...

Pump

Asset ID: BD-1511

Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004312,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as Pump from BD Dryer

Condition

Location

Viking pump NPE Series S/N 15T1HDA2, 3.0 HP, 460 Volts, 60 Hz, 3 phase with VFD. Last used as...

Pump

Asset ID: P-512

Viking

Viking pump NPE Series S/N 15T1HDA2, 3.0 HP, 460 Volts, 60 Hz, 3 phase with VFD. Last used as Heavy Phase Drain Pump

Condition

Location

Pump 264 GPM, 138 Ft., 22.8 HP, 3600 RPM, 31 FLA

Pump

Asset ID: P-705A

Teikoku

Condition

Location

Teikoku F41-215U4L-02045S1-AV, S/N FG-1379A Pump 13.2 GPM, 29.3 Ft. Hd, Driven by 2.3 HP, 3600...

Pump

Asset ID: P-706

Teikoku

Teikoku F41-215U4L-02045S1-AV, S/N FG-1379A Pump 13.2 GPM, 29.3 Ft. Hd, Driven by 2.3 HP, 3600 RPM, 3.7 FLA motor

Condition

Location

Vacuum pump by Gardner Denver Nash, Model 44SX010V5K000, 1750 max RPM, Driven by 3 HP, 17670...

Vacuum Pump

Asset ID: P-8622

Nash

Vacuum pump by Gardner Denver Nash, Model 44SX010V5K000, 1750 max RPM, Driven by 3 HP, 17670 RPM, 60 Hz motor. Last used as Flash Dryer Vacuum Pump

Condition

Location

Flowserve Innomag Pump BM69011100-BCO, 6.9 Imp. Dia/8.25 inch S/N 68429, 1.5x1x8 inches

Wet methanol pump

Asset ID: BD-1510

Flowserve

Condition

Location

Dry air tank, 400 gallons, C/S

Tanks & Pressure Vessels/Pressure Vessel

10 Items

Asset

Description

Condition

Location

Air Receiver

Asset ID: BD1202

Condition

Location

Air receiver by Manchester Tank. Vertical on base. Size 28" dia x 55: s/s on base for 78" OAH. ...

Air Receiver Pressure Tank 200 Gallons

Asset ID: AF1

Manchester

Air receiver by Manchester Tank. Vertical on base. Size 28" dia x 55: s/s on base for 78" OAH. Capacity 200 gallons. ASME Nat'l Bd # 270535 MAWP 300 psi at 400F. Also CRN certified.

Condition

Location

Expansion Tank S/N 39367, Wendland Mfg, 100 psi @ 700F MAWP, -20F @ 100 psi MDMT, 3500 gallons

Expansion Tank

Asset ID: T-1000

Wendland

Condition

Location

Steam Flash Drum to atmospheric. Manufactured by Precision Pipe & Vessel in 2009. ASME rated...

Flash Tank Drum

Asset ID: 31-V-156

PPV Precision Pipe & Vessel

Steam Flash Drum to atmospheric. Manufactured by Precision Pipe & Vessel in 2009. ASME rated MAWP 150/FV T 250F. Material carbon steel. Note: This flash drum is stacked on top of 31-V-164. Part of Absorber & cleanup module FP311

Condition

Horizontal carbon steel pressure vessel. Decanter and Liquid Knock Out. Built by Confab s/n...

Location

Soperton, GA

Horizontal Decanting Vessel

Asset ID: V-1506

Confab

Horizontal carbon steel pressure vessel. Decanter and Liquid Knock Out. Built by Confab s/n 64866. ASME Nat'l Bd# 28, rated at 184 psig at 350F (1269 kpa at 177C). Approx size 6.5 ft dia x 18 ft long T/T for 4,468 gallon capacity. Weight: Approx. 12000-15000 lbs. Last used as Decanter in ethanol plant - see schematic link. Insulation has been removed. Tank has been removed and is ready for loading. - price includes loading

Condition

Good

Location

Fenix tank, 1620 gallon capacity, 5.25 ft dia x 10 feet H, 390296.03.09 Rev 00. MAWP Shell 323...

Receiver Pressure Tank 1600 gallons

Asset ID: T-702

Fenix

Fenix tank, 1620 gallon capacity, 5.25 ft dia x 10 feet H, 390296.03.09 Rev 00. MAWP Shell 323 psi @ 482F. Last used as Biodiesel Reflux Tank

Condition

Location

Steam drum manufactured by Precision Pipe & Vessel in 2009. ASME MAWP 150 psig/FV at 550F, Nat'l...

Steam Blowdown Drum

Asset ID: 41-V-630

PPV Precision Pipe & Vessel

Steam drum manufactured by Precision Pipe & Vessel in 2009. ASME MAWP 150 psig/FV at 550F, Nat'l Bd# 893, s/n CV-0893. Material is SA312-TP347. Physical size is 24"dia x 8'-6" s/s, OAH 11'-10" for capacity of 185 gallons. Used as a steam blowdown drum

Condition

Steam drum by Nebraska Boiler, built 2009. Horizontal, ASME Nat'l Bd# 877, MAWP 800 psig/FV at...

Location

Soperton, GA

Steam Drum

Asset ID: 41-V-180

Nebraska Boiler

Steam drum by Nebraska Boiler, built 2009. Horizontal, ASME Nat'l Bd# 877, MAWP 800 psig/FV at 350F, Stainless steel SA-312-304. Physical size 42" dia x 120" s/s x 0.5" shell (11'-3" OAL) for 107cf or 720 gallons. Used as Catalytic Converter steam drum. Part of Catalytic Converter module FP411

Condition

Vertical Flash Vesel by Fenix, 48.4 inch diameter x 156.7 inches, Stainless Steel 304Last used as...

Location

Soperton, GA

Vertical Flash Vessel

Asset ID: F-106

Fenix

Vertical Flash Vesel by Fenix, 48.4 inch diameter x 156.7 inches, Stainless Steel 304Last used as FD Dryer Flash Vessel

Condition

Location

Fenix Vertical Flash vessel 390295.02.21C Rev 02, Shell design pressure 14.9 @ 400F, 950 gallons,...

Vertical Flash Vessel

Asset ID: F-504

Fenix

Fenix Vertical Flash vessel 390295.02.21C Rev 02, Shell design pressure 14.9 @ 400F, 950 gallons, 4 ft dia x 16.83 Ft, SS

Condition

Location