S4M | BioFuels

Location

Buffalo blower with 1000 HP motor. Blower Fan Type L, size 1200, tag L-25 serial num 88302107....

Blower

9 Items

Asset

Description

Condition

Location

Blower Fan 1000HP

Asset ID: B2106

Buffalo

Buffalo blower with 1000 HP motor. Blower Fan Type L, size 1200, tag L-25 serial num 88302107. Motor is Siemens induction motor 1000 HP 2300 volts 3/60. RPM 1780, frame 588US.

Condition

Location

Cardwell Industrial Exhauster blower, Size 350, Model IE857, serial 865-017-1. Approx size 60"...

Blower Fan 50HP

Asset ID: AF93

Cardwell

Cardwell Industrial Exhauster blower, Size 350, Model IE857, serial 865-017-1. Approx size 60" front-to-back x 63" side-to-side x 65" tall. Blower 52" dia. Driven by Siemens motor 50 HP at 3545 rpm 460/3/60.

Condition

Location

Kice blower fan, Model FA33 ARR 9F, with inlet duct/transition. Fan is carbon steel with 36...

Blower Fan 60HP + ss stack

Asset ID: cp102

Kice

Kice blower fan, Model FA33 ARR 9F, with inlet duct/transition. Fan is carbon steel with 36 inch inlet/outlet and 33 inch wheel. Airfoil fan wheel. Includes outlet duct/stack carbon steel duct 29" dia x 40 ft tall. Includes baseplate 60HP motor. Serial numbers 250431-4 & 250431-11. The fan has not been reconditioned but the motor is reconditioned. Depending on motor rpm, HP, and sp - cfm can be between 11,267 cfm and 25,039 cfm. See chart in links. This blower was sized for a baghouse silo (asset cp101) - both can be purchased together. Price here is for Blower/motor/stack only. Removed and ready to load

Condition

Location

Kice Blower, Model FC9, clockwise Arrgt 9FB. SN: 145410. Physical size is 38" x 34" x 27" tall. ...

Blower Kice 7.5HP

Asset ID: B2075

Kice

Kice Blower, Model FC9, clockwise Arrgt 9FB. SN: 145410. Physical size is 38" x 34" x 27" tall. Inlet diameter 9" OD, wheel diameter 15 5/8", wheel circumference 4.09', fan outlet area 0.5205 sq ft inside. Flow depends on static pressure - range with this 7.5 HP motor on it is from 600 cfm at 3" SP to 1800 cfm at 16" SP. Driven by 7.5 HP Reliance Electric Motor 480/3/60. See links for dimensions and performance charts. Aprox size for shipping 39" x 40" x 27" high. Removed, ready to ship

Condition

Location

### Positive displacement blower (Roots Type) - Gardner Denver Sutorbilt Legend Series vacuum...

Blower PD Fan (Roots Type) 25HP

Asset ID: AF9

Sutorbilt

### Positive displacement blower (Roots Type) - Gardner Denver Sutorbilt Legend Series vacuum pump Model GAFMCRD, serial S378101. Catalog No. 5MR. Gear dia 6" - Inlet/Outlet size 4" - Capacity 292 cfm at 7 psig to 263 cfm at 11 psig. - Driven by 25HP motor at 1770 rpm. 460/3/60. - In sound attenuating enclosure. Enclosure dimensions 45" x 45" x 48" tall. See brochure in links.

Condition

Location

## DDG Unload & Convey System ## #### **Package 1: 75 HP High-Pressure Blower System (QTY...

NOL-TEC Pneumatic Conveying & Blowers

Asset ID: 7341

Hardy Pro-Air

## DDG Unload & Convey System ## #### **Package 1: 75 HP High-Pressure Blower System (QTY 2)** Engineered for high-volume pneumatic conveying of raw materials, this package features a heavy-duty Gardner Denver blower integrated into a premium sound-attenuating enclosure. * **Model:** HPP-GD514HF-75HP-6FS-6 * **Blower:** Gardner Denver Heliflow 514 HF * **Motor:** 75 HP (1800 RPM, 460V, 3-Phase) * **Enclosure:** Pro-C Sound Enclosure (Model PC72x48x72) * **Included Instrumentation:** * 1600 CFM Exhaust Fan with adjustable thermostat (60°F - 120°F) * 0-15 PSI Pressure Gauge * 6" Sch. 40 discharge piping * Heavy-duty base and belt assembly #### **Package 2: 30 HP Vacuum Blower System (QTY 3)** Specialized vacuum package designed for material reclamation and unloading operations. * **Model:** HVP-GD6L-30HP-6-6 * **Blower:** Gardner Denver Sutorbilt Legend 6L * **Motor:** 30 HP TECO Westinghouse (1800 RPM, 460V, TEFC) * **Enclosure:** Pro-C Sound Enclosure (Model PC72x48x72) * **Integrated Components:** * Vacuum Relief Valve (Pre-set at 10 in HgV) * Inline Filter and Discharge Silencer * 0-30 in HgV Vacuum Gauge and Vacuum Transmitter * 6" ANSI Flanged Connections These units were professionally engineered as part of a complete DDG handling system (Nol-Tec Project #9334). Full technical notation available upon request to facilitate rapid re-installation: * **IOM Manuals:** Comprehensive Installation, Operation, and Maintenance manuals for both packages. * **Mechanical Drawings:** Includes overall plan views and elevation drawings for rail/truck unload and silo fill lines.

Condition

Location

### Howden High Heat Blower - Never Used ### **Howden High Heat Blower ExVel Turbo Fan**. Model...

Turbo Fan Blower 1800HP

Asset ID: B-1010

Howden Roots

### Howden High Heat Blower - Never Used ### **Howden High Heat Blower ExVel Turbo Fan**. Model HBXrG-20/675. Serial # NFF00019-10. Includes Siemens 1500 Series PLC, Bentley Nevada 3500 Series monitor system. This is NEW, old stock. Never used, still in protected crates. - Design Pressure 272.4 psi and Temperature 446F - Inlet Volume 6738.99 ACFM - Main skid plus (1) nitrogen skid and (2) lube unit skids for fan and gear **Driven by Toshiba 1800HP induction motor** - Toshiba World Energy Series 3 phase induction motor, Serial # 140702955 - Model # 3VJM400LI6297I - 1800 HP 3540 rpm 4160v 60 Hz 3 phase ExVel™ turbo fans have unique, industry leading impeller and bearing technologies delivering the highest differential pressures available in the fan industry. They can replace more costly centrifugal compressors or multiple blowers with a single unit. This Howden Blower was to be part of the gasification system to move the hot syngas exiting the pyrolysis vessel in a biomass conversion system. It was never installed or used. **Condition** - Still in crates. The crates are sealed against weather, protected, and in long term storage inside a third party protected warehouse. No known refurbishment required - assets are sold As Is Where Is.

Condition

Tuthill blowers (3) with (6) FlowTek automtic valve manifold with Bray acturators, FlowTek...

Location

Sparks, NV

Tuthill Blowers 20HP (3)

Asset ID: 2032

Tuthill

Tuthill blowers (3) with (6) FlowTek automtic valve manifold with Bray acturators, FlowTek AutoMater. Used. System has now been removed, cleaned, and ready for sale. Blower driven by 20 HP motor 230/460v 3/60 1775 rpm.. Priced for the LOT - 3 blowers and the valve manifold

Condition

Location

Upblast Blower fan still in crate - New, Old Stock Generally Upblast fan, low silhouette with...

Upblast Fan

Asset ID: 2457

Cook

Upblast Blower fan still in crate - New, Old Stock Generally Upblast fan, low silhouette with steel propeller. Mfg Loren Cook Co. Model 30 LXUL. Design 12,000 cfm at 0.125" sp. Fan rpm 870, Belt drive with 2 HP motor 3/60 460v 1725 rpm open drip proof. Motor in airstream.

Condition

Location

### Feedwater Pump ### 400 GPM Sulzer Boiler Feedwater Pump, Model MSD 3x6x9E, 5-Stages. Flow...

Boiler

2 Items

Asset

Description

Condition

Location

Feedwater Pump

Asset ID: 8818

Sulzer

### Feedwater Pump ### 400 GPM Sulzer Boiler Feedwater Pump, Model MSD 3x6x9E, 5-Stages. Flow Characteristics: 400 GPM at 1800 Ft. Hd. (780 PSI), RPM: 3560. Like New Condition. Storeroom Spare Rebuilt 07/2021. Steam capacity of boiler rated between 150,000 - 200,000 Lbs. / Hr. IEN # 126835 New or Rebuilt 2021.

Condition

Location

Drums of Xceltherm MK-1 Heat Transfer Fluid - 55 gallon drums. Approximately 10,000 gallons in...

Thermal Fluid

Asset ID: BD-1505

Xceltherm MK-1

Drums of Xceltherm MK-1 Heat Transfer Fluid - 55 gallon drums. Approximately 10,000 gallons in tank.

Condition

Location

### BIOMASS BOILER. 1500 BHP 450 psig ### - Hurst Biomass Boiler, 450 psig saturated. Model #...

Boiler/Biomass

1 Items

Asset

Description

Condition

Location

Biomass Boiler 1500HP + 1MW GenSet

Asset ID: 7258

Hurst

### BIOMASS BOILER. 1500 BHP 450 psig ### - Hurst Biomass Boiler, 450 psig saturated. Model # HYB 9570-450-1, Capacity 1500HP (51,750 #/hr steam). Heating surface 9750 sq ft. - This is a HYBRID biomass boiler (part firetube & part watertube) designed so well by Hurst Boiler with reciprocating grate - Steam turbine GenSet 1MW - inlet superheated steam 450 psig - System only used for about 6 years, then idled. Built 2009 - Fuel was shredded carpet. - Natural gas burner used for startup combustion only, then shut off for operation Complete Steam Plant with a non-condensing type Steam Turbine Generator 1.0 MW (rated at 750 KW) , with Deaerator tank, high pressure boiler feed water pumps, wet ash removal system, controls, fuel feeding conveyors, all fans and standard boiler trim. Also includes an Air Technologies CEMS (continuous emissions monitoring system) and a Fabricated Steel Silo with auger discharge for fuel storage and conveyance. Manufacturer Lists the following Features: "Hybrid" Firetube/Watertube Vessel Design; Watertube Section; Firetube Section with Blast Tubes; Reciprocating Fire Grates; Under Fire Air Fan; Reciprocating Drive; Over Fire Fan/Dampers; Carry-Over Reinjection Blower; 1500HP Fire Door; Ash Clean Out Door; Fuel Metering Bin; Ash Removal Conveyor; Refractory Arch. Includes operating manuals and some drawings. See FLYER in link for more details and a component list. Last used for burning used shredded carpet. The blast tubes prevent fouling from ash on the first pass through fire tubes. We have shipping specs, weights, dimensions on file.

Condition

Tray Type Deaerator. Was used as part of a 210,900 Lb/Hr Cogeneration Boiler. - Horizontal...

Location

Southeast USA

Boiler/Deaerator

3 Items

Asset

Description

Condition

Location

Deaerator Tank

Asset ID: 2097

Advance Boiler & Tank Co

Tray Type Deaerator. Was used as part of a 210,900 Lb/Hr Cogeneration Boiler. - Horizontal deaerator with a vertical top with trays. Carbon steel SA516-70 - Overall dimensions including insulation: Horizontal bottom part size 8 ft diameter x 18’-6”, Vertical top part size 8 ft dia x 8 ft tall - Deaerator storage vessel is 90 inches dia x 16'-3" long, 0.50 " thick steel.(ID = 44.5" radius). ASME MAWP 100 psig. Serial number 490-07, ASME 491-007 - Top Heater Tray Evaporator part is 78" OD x 4'-6" length ASME MAWP 100 psig. Serial number 490-06. ASME 491-006 Deaerator was being actively used and maintained until it was mothballed about 2020. It is still installed, stored inside and dry. Price includes removal and loading of DA only. Structure and piping will be extra if wanted.

Condition

### Deaerator Tank System ### 180,000 PPH Deaerator tank and Deaerator storage tank for boiler...

Location

Northeast US

Deaerator Tank System

Asset ID: 8816

Advanced Boiler & Tank Co.

### Deaerator Tank System ### 180,000 PPH Deaerator tank and Deaerator storage tank for boiler feedwater system. Manufactured by Advanced Boiler & Tank Co. in 1988. Specifications: * 75 psig @ 300 degrees for both DA tank and feedwater storage tank * DA tank dimensions: 7' 3" tall x 4' 6" diameter (2210mm x 1372mm diameter) * DA storage tank dimensions: 21' 9" length x 8' diameter (6629mm x 2438mm diameter) The DA system was designed to provide feedwater to a 180,000 lb./hr. Nebraska water tube boiler. Price includes dismantling, removal, and loading.

Condition

### DEAERATOR & FEED WATER SYSTEM ### One (1) reconditioned Atmospheric Boiler Feed Water...

Location

West Coast, USA

Feed Water System for 150 HP Boiler

Asset ID: 8801

Atomspheric

### DEAERATOR & FEED WATER SYSTEM ### One (1) reconditioned Atmospheric Boiler Feed Water System, complete with a 130/200 gallon carbon steel vented tank, new duplex Grundfos pumps, each sized for the full evaporation rate of a 150 HP boiler for 100% redundancy. System comes, complete with structural steel stand, steam sparge tube and temperature control to preheat and deaerate the makeup water, and water level controls. Cleaned and painted to match the boiler. Feedwater system can ship in 4 to 6 weeks ARO

Condition

**84 kW 150 PSI Fulton Electric Steam Boiler with Feedwater System** Boiler is in good working...

Location

South Carolina

Boiler/Electric Boiler

1 Items

Asset

Description

Condition

Location

84KW Fulton Electric Boiler

Asset ID: 8088

Fulton

**84 kW 150 PSI Fulton Electric Steam Boiler with Feedwater System** Boiler is in good working condition - will be shop tested prior to shipping. These boilers are nearly 100% efficient with zero emissions - compact design - Style FBE, Model FB084E - Boiler Output: 84 kW or 9 BHP - 164 MBTU/hr, steam at 169 lbs/hr. - Power Voltage: 480/3 Phase Power Amp: 101 Hertz: 50/60. Control Voltage: 120/1 phase - Maximum Allowable Working Pressure: 100 PSI - ASME National Board Number: 114141 **Includes** Fulton Feed Water System (Single Pump) Crane Pump w/ Weg Motor: 1/3 HP Voltage: 208-230/460 60 Hz

Condition

One (1) 1998 200 HP Johnston boiler, 4 pass wet back, gas and No. 2 oil fired, 250 PSI design...

Location

Tennessee

Boiler/Firetube

2 Items

Asset

Description

Condition

Location

Firetube Boiler 200HP

Asset ID: 8096

Johnston

One (1) 1998 200 HP Johnston boiler, 4 pass wet back, gas and No. 2 oil fired, 250 PSI design pressure. The boiler will be cleaned on the fireside, waterside, outside, and painted. The boiler pressure vessel, tubes, piping, and blowdown valves will be hydrostatically tested. The existing Honeywell 7800L Flame Safeguard Controls will be checked and replaced if found defective. New Honeywell High Limit with manual reset, Operating Limit, and Modulating Limit Controls will be installed. The boiler will be electrically and mechanically checked throughout to identify and replace any defective components. The combustion air fan will be run to check for balance and bearing smoothness. We guarantee that the pressure vessel and tubes are in good condition and that the boiler will pass a hydrostatic test at the time of startup. We will give a 1 year parts replacement warranty on controls. These photos are representative - boiler is yet to be reconditioned - allow 6 to 8 weeks after order. This quote is for the boiler only as reconditioned. No support equipment is included. Note that this boiler is a little shorter and wider than standard Johnston dimensions so will not be a direct drop in if replacing with like kind……

Condition

Garioni firetube boiler 300HP. Type NG5000, serial 7118. Mfg by Garioni, Brescia, Italy. ...

Location

Southeast

Firetube Boiler 300HP

Asset ID: 7124

Garioni

Garioni firetube boiler 300HP. Type NG5000, serial 7118. Mfg by Garioni, Brescia, Italy. Capacity 5000 kg/hr (11,000 pph steam or about 300 HP at 12 barg max (180 psig). Firetube 2-pass dry back type boiler. Built in 2002 but only used about 6 months. Electrical for controls is 110V 60 Hz. Burner fires on #2 fuel oil - pumps not included. The pictures show the boiler when it was installed, and now in the laydown yard. Will need new control panel. Sold As Is - price includes loading on your truck.

Condition

## High Pressure Steam Generator - to 1,380 psig NEW ## High Pressure Steam Boiler. New- never...

Location

Ft Worth, TX

Boiler/High Pressure

1 Items

Asset

Description

Condition

Location

High Pressure Boiler

Asset ID: 2096

GTS Energy

## High Pressure Steam Generator - to 1,380 psig NEW ## High Pressure Steam Boiler. New- never used.7200 MBTU/hr. Built in 2015, engineered by GTS Energy. Serial # G-8410. ASME Nat'l Bd # 368 , MAWP 1380 psig at 600F, normal operating pressure is 1250 psig. Honeywell flame management control. Dual fuel Lo NOx burner fired with natural gas or oil. Industrial Combustion LNVLG-100 Lo NOx <30 ppm. Operating steam flow 12,124 lbs.hr at 1160 psig closed loop, 6 inch connections. NUK generator- top down firing. All automatic, closed loop system- requires no operator. ***Explanation of Operation*** - The NUK® High-Pressure Steam Generator was specifically developed for oil deodorization applications typically used in the food industry. The NUK is used as a heat source during the deodorization process to safely remove undesirable flavors and odors from edible oils; leaving the oil free from toxins. The NUK High-Pressure Steam Generator is a hermetically closed-looped heating system utilizing a water-steam mixture with maximum design pressures of 1950 psi. The system consists primarily of a vertical cylindrical combustion chamber, coil, burner, steam supply, and condensate return manifolds See links for General Arrangement and P&ID's.

Condition

Hot water boiler Sellers 5 MMBTU (150HP). Model S-150-W Model 15 Senior. Fired by natural gas -...

Location

Tennessee

Boiler/Hot Water

1 Items

Asset

Description

Condition

Location

Hot Water Boiler 5 MMBTU

Asset ID: M33

Sellers

Hot water boiler Sellers 5 MMBTU (150HP). Model S-150-W Model 15 Senior. Fired by natural gas - automatic. LoNox burner 30 ppm, turn down ratio 3:1. Input 6.27 MMBTU, Output 5,021,000 BTU/hr, 150 psi max pressure . Water capacity 411 gallons. S/N 103390, ASME Nat'l Bd# 10610. Includes recirculation motor 7.5 HP. Boiler was removed in 2022, and is now in the laydown yard. Photos shown are of when it was installed and after it was removed.

Condition

## Rentech Duct Fired HRSG System (Heat Recovery Steam Generator) ## ### Price Just Reduced...

Location

Van Wert, OH

Boiler/HRSG & Gasifiers

3 Items

Asset

Description

Condition

Location

Gas Fired Steam Generator (HRSG)

Asset ID: 7644

Rentech

## Rentech Duct Fired HRSG System (Heat Recovery Steam Generator) ## ### Price Just Reduced ### This is a ***brand new*** HRSG - never used. Model Waterfall Type "O" - Rated at 200,000 pph at 400 psig saturated steam with economizer (can also run at 200 psig) - Designed for feedwater flow 400 gpm at 439 psig and 228F **INCUDES** (also see pdf list in link) - Natural gas duct burner system and fuel skid with gas train and flame supervision, rated at 136 MMBTU/h - Steam Generator System (HRSG) Evaporator. "O" type tube arrangement with steam drum and mud drum, 2" tubes - Bypass stack 50 ft x 76" diameter - Exhaust stack 50 ft x 76" diameter - Economizer - finned tube single pass - Boiler Control System: BMS - plc controlled burner management system, CCS - combustion control system, HMI touch screen, Allen Bradley plc and HMI - Interconnecting duct work - Ladders & Gratings Rentech had pre-fit all structural steel in the shop. Once they were assembled, photos were taken, and pieces were disassembled for shipment. Rentech can provide 3-D modeling of the complete boiler system including auxiliaries to assist in the system layout and to avoid costly interference and fit-up issues in the field. (ay be extra cost) **System has been completed (never has been used)** We have complete shipping documents for number of pieces and sizes.

Condition

Location

## Biomass Gasifier 250 TPD w/Zurn Biomass Boiler and Scrubber ## Pressurized Linear Starved Air...

Gasifier Biomass 250 TPD

Asset ID: 1229

GMax

## Biomass Gasifier 250 TPD w/Zurn Biomass Boiler and Scrubber ## Pressurized Linear Starved Air Low Temperature (LSALT) Gasifier. Quantity (2) - priced for BOTH **Gasifier** - Shallow fluidize bed technology - Tested on MSW, auto shredder residuals, wood chips, bark, wood chips and peper mill sludge - Commercial scale 250 TPD (90,000 pph) - readily scaled to 700 to 1000 TPD **Zurn HRSG** - Zurn HRSG 150,000 pph at 900 psig operating presure, bituminous coal feed - Superheater and Economizer - Physical size approx 73 ft tall x 24 ft wide x 22 ft deep

Condition

### Waste to Energy Gasifier & Steam Generator ### Steam Generator 50,000 lbs/hr at 150 psig....

Location

Georgia

Waste to Energy Gasifier Steam Generator

Asset ID: 1964

Primenergy LLC (PRME) & Siemens

### Waste to Energy Gasifier & Steam Generator ### Steam Generator 50,000 lbs/hr at 150 psig. System disposes of wood flour and carpet waste (the fuel) by a staged combustion process in a Gasifier resulting in hot clean waste gases through a Rentech HRSG (heat recovery steam generator) to generate steam. Natural gas is used at startup to obtain combustion of the fuel, then shut off during the process. Feed is 3 tons/hr of blended waste (or 5 tons per hour of wood flour) generating 50,000 lbs/hr steam at 150 psig, and approx. 745 lbs per hour of ash. Includes ash recovery and silo, gasifier, combustion tube column, HRSG (heat recovery steam generator), baghouse dust collector for fly ash and stack. Siemens was the systems integrator and engineered the plant; PRIMENERGY (PRME) was the general contractor and manufacturer of the KC-17 Gasifier. See all links including PFD for all components. See documents for equipment list

Condition

FSE Energy Thermal Fluid Heater Hot Oil Boiler Model CH25L. Volume 1928 Gal, Heat Surface 2720...

Location

Georgia

Boiler/Thermal Fluid

1 Items

Asset

Description

Condition

Location

Hot Oil Thermal Boiler 25 MMBTU

Asset ID: B-1000

FSE

FSE Energy Thermal Fluid Heater Hot Oil Boiler Model CH25L. Volume 1928 Gal, Heat Surface 2720 square ft, 140 psig @ 660F, Heat Capacity 25,000,000 BTU/Hr (746 BHP), 1254 GPM min flow. Control panel with Allen bradley Panelview Plus 400, Model CM11-G-30 Power flame burner S/N 091455322 Nat Gas

Condition

Location

### Watertube Boiler Low Nox ### - Low Nox Burner Coen model 675 features fuel gas return (FGR)....

Boiler/Watertube

7 Items

Asset

Description

Condition

Location

Watertube Boiler 103,500 #/hr

Asset ID: 8805

ABCO

### Watertube Boiler Low Nox ### - Low Nox Burner Coen model 675 features fuel gas return (FGR). NOx emissions 30 to 60 ppm - Dual Fuel: natural gas and #2 fuel oil - Generates 103,500 lb/hr at 175 psig saturated steam max - Incudes Superheater rated at 90,000 PPH at 426°F - Deaerator and feedwater pumps - Economizer: horizontal fully drainable finned tube - Stack: 100 ft tall, base 64" ID with outlet 44" ID - Ladders and platforms, interconnection pipes, valves, safety relief valves ABCO 2 pass, D-type Watertube Boiler. EIN # 467310. The boiler is designed to generate a maximum total of 103,500 lbs./hr. of saturated steam at 175 psig, while the burner heat release rate is 132 MMBtu/hr. on HHV basis with natural gas firing (90,000 lbs./hr. of the total is superheated at 426° F). The design pressure of the boiler and superheater is 200 psig, while the design pressure of the economizer is 250 psig. The boiler is furnished with a boiler outlet transition, economizer, stack, ladders and platforms, trim, associated piping and valves. Coen model 675 Low Nox burner. Dual fuel ( natural gas and # 2 fuel oil ). FD fan Robinson blower with 60 HP motor. Serial no. 90110 **Boiler has very low hours of use**

Condition

### Watertube Boiler Low Nox ### Superheat Steam Boiler 160,000 lbs/hr at 400 psig at 700F,...

Location

New York

Watertube Boiler 160,000 #/hr

Asset ID: 8079

Rentech

### Watertube Boiler Low Nox ### Superheat Steam Boiler 160,000 lbs/hr at 400 psig at 700F, manufactured by Rentech in 2015. Boiler includes: * John Zink Low Nox burner with FD fan * Fueled by natural gas * Economizer, stacks & silencer * Stack * Includes boiler trim, valves,catwalks, ladders and associated piping Qty (2) Two boilers available (priced separately)

Condition

Location

## Indeck Watertube Boiler w/ Economizer 200,000 lb/hr at 165 psig ## - Dual Fuel: Natural Gas...

Watertube Boiler 200,000 #/hr

Asset ID: 1360

Indeck

## Indeck Watertube Boiler w/ Economizer 200,000 lb/hr at 165 psig ## - Dual Fuel: Natural Gas at 237 MMBTU/hr or #2 fuel oil - LoNOx Natcom burner: P-237-HL0G-39-2229 Hyper Mix - Economizer - Grade mounted FD fan **Still installed, Currently in Operation.Will be avaialble toward end of 2026**

Condition

Location

## Victory Watertube Boiler w/ Economizer rated at 205,000 lb/hr at 250 psig ## - "O" Type...

Watertube Boiler 205,000 #/hr

Asset ID: 1359

Victory

## Victory Watertube Boiler w/ Economizer rated at 205,000 lb/hr at 250 psig ## - "O" Type design - Natural gas fired includes gas train - Economizer - Controls - Combustion blower is a NY Blower with 400 HP motor Serial Number 41B. Boiler is currently in operation running at 190,000 #/hr at 150 psig The VOYAGER® O-style Boiler is designed to provide a rapid ramp rate and is easy to ship, install, operate and maintain. These are 100% water cooled and refractory free front and rear walls. **Still installed, Idled in March 2025**

Condition

Location

## Victory Watertube Boiler w/ Economizer rated at 205,000 lb/hr at 250 psig ## - "O" Type...

Watertube Boiler 205,000 #/hr

Asset ID: 1358

Victory

Condition

Location

### Cleaver Brooks Industrial Watertube Boiler 250,000 lbs/hr superheated steam ### - Boiler...

Watertube Boiler 250,000 #/hr

Asset ID: 2349

Cleaver Brooks

### Cleaver Brooks Industrial Watertube Boiler 250,000 lbs/hr superheated steam ### - Boiler model NB-801D-125-550-AL-LH, serial CP-4582 - NEW, never installed - D-type watertube style - Pressure 420 psig operating pressure (superheated, temp 650F +/- 25). Superheated steam - Natcom LoNOX Burner, natural gas. Gas train included. Burner model NCB-330-68A-000-S10-000 - Stack included - 3 sections - Economizer, ECO, Inc. vertical 7.5 ft dia x 20 ft tall - Controls - 2 plc's + burner management + combustion controls - Includes SCR for emissions reduction - Under nitrogen purge with desiccant in furnace area Removed and stored - ready to load. See additional information in document links

Condition

Location

### Watertube Boiler with Economizer 90,000 #/hr Natural Gas ### Victory Natural Gas Watertube...

Watertube Boiler 90,000 lbs/hr

Asset ID: 2116

Victory

### Watertube Boiler with Economizer 90,000 #/hr Natural Gas ### Victory Natural Gas Watertube Boiler Type O, Voyager Series VS-5-78SP SH. Capacity 90,000 lbs./hr saturated steam at 800 psig (design pressure 950 psig) ASME Nat'l Bd # 589. - Economizer - Feedwater System - Stack 50 feet - Electrical and PLC control systems. With feedwater temperature 227 Fahrenheit to economizer inlet. Complete economizer system. Furnace Radiant Heating Surface 889 Sq. Ft, Boiler Convective Heating Surface 6,455 Sq. Ft., Total Heating Surface 7,344 Sq. Ft. Superheater surface is 980 sq. ft. Drums Submerged arc automatic welded and stress relieved with radiographed welded seams and tubes are rolled and expanded into the drum. Drum material is SA-516 Gr. 70. Mud Drum is provided with a 12” x 16” hinged manway access in each drum head. Steam Drum is provided with a 12” x 16” hinged manway access in each drum head. All tubes enter the drum radially with full parallel bearing through the drum plate and all tubes are full diameter with no swaging. All tubes are full diameter tubes with no swaging.

Condition

Location

Alfa Laval B214A centrifuge. The complete unit will be reconditioned, balanced, new...

Centrifuge and Decanter/Centrifuge

9 Items

Asset

Description

Condition

Location

Centrifuge B214 A

Asset ID: 5575

Alfa Laval

Alfa Laval B214A centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery. Reconditioning includes, complete disassembly of machine, sandblast and paint all carbon steel parts, remove gear pump, install end plate, Rebuild using all new parts, Bearings, seals, and O-rings (Viton), All Vibration Isolators units will be tested and come with manuals, some tools and one set of gravity discs. High speed balance will also be performed. 40 HP motor will be rebuilt or new depending upon timing. Welcome to inspect the machine as tests are run to verify balance. Centrifuge can also be purchased " as is, where is " if desired.

Condition

DeLaval B214C solid bowl disc centrifuge. Serial number 3532804. Capacity approximately 36,000...

Location

Houston, TX

Centrifuge B214 C

Asset ID: 7117

DeLaval

DeLaval B214C solid bowl disc centrifuge. Serial number 3532804. Capacity approximately 36,000 to 40,000 #/hr (84 gpm). Motor is 40HP. Cleaned and painted, epoxy internal coating but not reconditioned. Bowl removed and crated for shipping.

Condition

Location

Alfa Laval centrifuge Model MAB 206-S-24-60-HZ. Serial No. 2965454 Throughput capacity approx...

Centrifuge MAB 206

Asset ID: 1756

Alfa Laval

Alfa Laval centrifuge Model MAB 206-S-24-60-HZ. Serial No. 2965454 Throughput capacity approx 10.6 m3/h (46.6 gpm). Separation takes place in a solids-retaining bowl that can be arranged for either clarification or purification. Solids retained in bowl and removed by manually cleaning. Was in biodiesel service. Has been idle since 2018. Voltage: 3-Phase 575v. There are (2) MAB centrifuges here (Asset 1756 and Asset 1757). If both are bought, we can ship on the skid they are mounted on. Price is for EACH MAB centrifuge which includes removal and loading on your truck. Controls not included. Local Start/Stop Control Only. We can provide controls at additional charge. Note: Unit was in working condition in a biodiesel plant when idled in 2018. Now stored outside in laydown yard since 2023 - will need reconditioning - we can do that for you.

Condition

Location

Alfa Laval centrifuge Model MAB 206S-24-60/4049-8. Serial No. 4032493. Throughput capacity...

Centrifuge MAB 206

Asset ID: 1757

Alfa Laval

Alfa Laval centrifuge Model MAB 206S-24-60/4049-8. Serial No. 4032493. Throughput capacity approx 10.6 m3/h. (46.6 gpm). Separation takes place in a solids-retaining bowl that can be arranged for either clarification or purification. Solids retained in bowl and removed by manually cleaning. Was in biodiesel service. Has been idle since 2018.. Voltage: 3-Phase 575. There are (2) MAB centrifuges here (Asset 1756 and Asset 1757). If both are bought, we can ship on the skid they are mounted on. Price is for EACH MAB centrifuge which includes removal and loading on your truck. Controls not included. Local Start/Stop Control Only. We can provide controls at additional charge. Note: Unit was in working condition in a biodiesel plant when idled in 2018. Now stored outside in laydown yard since 2023 - will need reconditioning - we can do that for you

Condition

Location

Remanufactured Westfalia model OSB 35-02-576 single pump on light phase, heavy phase by gravity...

Centrifuge OSB-35

Asset ID: 1748

Westfalia

Remanufactured Westfalia model OSB 35-02-576 single pump on light phase, heavy phase by gravity oil purifer. No controls. Capacity nominal 23,000 liters/hr (100 gpm). This machine is completely rebuilt. This includes replacement of bearings, seals and remanufacture of any substandard parts. The exterior cosmetics are restored to the best possible condition. The machine will be assembled, balanced, and run for several hours prior to shipping.. Ready to ship - one - two weeks ARO - Includes:20 HP, 480 Volt, 3 Phase, 60 Cycle Explosion Proof Motor - 6500 RPM Bowl Speed, 11,000 G Force - Paring Device on Light Phase - Gravity Discharge on Heavy Phase - Direct Drive - Powder Coated Frame - 20 Litre Bowl Volume - 11 Litre Sludge Space - 40 Degree Bowl with 0.5 MM Caulk Space - Stainless Bowl - SS Bowl Liner, with set of Erosion Clips - Water Harness - Special Set of Tools - Operation / Parts Manual - Warranty 6 months

Condition

**Alfa Laval Centrifuge PX 65**. Used, good condition. Voltage 440v, 60 Hz. Serial number for...

Location

Alberta

Centrifuge PX65

Asset ID: 8815

Alfa Laval

**Alfa Laval Centrifuge PX 65**. Used, good condition. Voltage 440v, 60 Hz. Serial number for one of the machines is 4147096-2006. Last use was in edible oil refinery in Asia. - No tools but we can furnish as option - No controls - we can furnish new controls with touch screen and ss panel as an option - We can recondition, add new gaskets & seals, balance machine, and test running condition on water - as an option - Allow 5 to 6 weeks for transportation from Asia to the U.S. More time prior to delivery would be necessary depending on options chosen - Quantity (2) - Priced separately for EACH. Includes removal, transportation delivered to US Gulf Coast. Tariffs extra, expected to be $7,000 but will be assessed at cost.

Condition

Delivered to US West Coast, Gulf Coast

Location

Centrifuge PX80

Asset ID: 8814

Alfa Laval

**Alfa Laval Centrifuge PX 80**. Used, good condition. Voltage 440v, 50 Hz. Serial number...

**Alfa Laval Centrifuge PX 80**. Used, good condition. Voltage 440v, 50 Hz. Serial number 4205800/2014. Last use was in edible oil refinery in Asia. - No tools but we can furnish as option - No controls - we can furnish new controls with touch screen and ss panel as an option - We can recondition, add new gaskets & seals, balance machine, and test running condition on water - as an option - Allow 5 to 6 weeks for transportation from Asia to the U.S. More time prior to delivery would be necessary depending on options chosen - Price Includes removal, transportation delivered to US Gulf Coast. Tariffs extra, expected to be $7,000 but will be assessed at cost.

Condition

Westfalia RSA 60-01-076 vegetable oil separator.serial # 1697-254. Max bowl speed 6450 RPM,...

Location

Centrifuge RSA-60

Asset ID: 1680

Westfalia

Westfalia RSA 60-01-076 vegetable oil separator.serial # 1697-254. Max bowl speed 6450 RPM, solids 1.25 kg/dm3, heavy solids 1.1 kg/dm3. Driven by 15 KW (20 HP) explosion proof motor 400v 3 phase 50 Hz. Rated @ 13000 LPH (approx 60 gpm), both liquid phases discharged under pressure, No tools or Controls. Was recently taken apart and thoroughly cleaned/inspected. Bowl has been rebuilt and installed.

Condition

### **New Alfa Laval VO10 centrifuge** ### NEW centrifuge still in original crate. Built in 2021...

Location

Europe

Centrifuge VO 10 ss

Asset ID: 1931

Alfa Laval

### **New Alfa Laval VO10 centrifuge** ### NEW centrifuge still in original crate. Built in 2021 and never used. This Alfa Laval VO-10 disk centrifuge is aimed for gentle and cost-efficient refining of vegetable oils. - Rated at hydraulic capacity 44 gpm for a nominal capacity of 100 MTPD (19 gpm). - Direct drive 18.5 KW (25 HP) motor with VFD. 480v 3/60 - All wetted parts in contact with product are stainless steel 304 - Controls included - Tools included - Still in original crates - We have the complete specifications in our Virtual Data Room - by invitation - Available for immediate shipment

Condition

Location

Siebtechnik short bowl decanter (SBD) model SBD 400K, serial 6790. Speed 2800 rpm. Drive motor...

Centrifuge and Decanter/Decanter

11 Items

Asset

Description

Condition

Location

Decanter

Asset ID: 1998

Siebtechnik

Siebtechnik short bowl decanter (SBD) model SBD 400K, serial 6790. Speed 2800 rpm. Drive motor approx 20 HP. The SHORTBOWL decanter with cantilever design is the optimal solution for hot applications and high cleaning requirements. This over-hung design special geometry is highly suited for the separation of fine solid particles having a specific gravity that is very different from the liquid phase. The unit is ideal for pharmaceutical or food operations.

Condition

Location

### Alfa Laval Decanter Centrifuge, Food Grade ### Alfa Laval NX-6541 solid bowl decanter...

Decanter / Centrifuge

Asset ID: 7881

Alfa Laval

### Alfa Laval Decanter Centrifuge, Food Grade ### Alfa Laval NX-6541 solid bowl decanter centrifuge. **Food grade**. Maximum bowl speed 3100 rpm. 25" diameter x 98.75" long bowl. 360 degree solid discharge ports, 9" single lead conveyor, base, casing gearbox 127/1 ratio, 75HP main drive motor, 30HP backdrive motor, 460V, 3PH, 60Hz. The product contact areas are constructed from stainless steel. This system has approximately 500 hours of run time and is in excellent condition. Price is "As is". For an additional charge, we can add new bearings, seals, O-rings, and have balancing with test run done.

Condition

Location

### NEW Decanter ### Andritz A10-4 decanter centrifuge with oil lubrication. New-unit is still...

Decanter / Centrifuge

Asset ID: 7885

Andritz

### NEW Decanter ### Andritz A10-4 decanter centrifuge with oil lubrication. New-unit is still on skid and in boxes. Was never installed. G force 2,700. Diameter 1000mm

Condition

Location

Westfalia solid bowl horizontal decanter centrifuge. 2 phase, Model CB-505-71-32 sanitary. ...

Decanter CB-505

Asset ID: 1716

Westfalia

Westfalia solid bowl horizontal decanter centrifuge. 2 phase, Model CB-505-71-32 sanitary. Used. Bowl 500/265 mm/19,685" diameter x 84" long. Centripetal pump discharge with GEA Varipond P design for adjusting pond depth on the fly. T316L stainless steel contact surface. Main drive 120 HP (90KW). Back drive 20HP. Max bowl speed 3500 rpm. Lube system with pump and plate exchanger, casing, and frame. No stand, no controls. Priced As Is - will need a stand. We can also recondition for you

Condition

Location

Westfalia CA 458-00-02 decanter centrifuge, 316ss. Max bowl speed 3000 RPM, 2300 G's, 18 x 80"...

Decanter Centrifuge CA-458

Asset ID: 7638

Westfalia

Westfalia CA 458-00-02 decanter centrifuge, 316ss. Max bowl speed 3000 RPM, 2300 G's, 18 x 80" bowl ID. 6.25" single lead hardsurfaced conveyor, 30 KW motor 440/3/60/3535 RPM, hydraulic backdrive with 15 HP motor feed tube, chutes and control panel mounted on a stand. 1994 vintage.

Condition

Frames and bases for Alfa Laval decanter PM75000. Three steel frames for decanter, (4) decanter...

Location

Florida

Decanter Frames & Bases

Asset ID: B2092

Alfa Laval

Frames and bases for Alfa Laval decanter PM75000. Three steel frames for decanter, (4) decanter bases (one with cover), Sold as a LOT.

Condition

Location

3-phase decanter Sharples P3400 Super-D-Canter. Bowl dimensions 14" x 48", beach angle 10 degree....

Decanter P-3400 3-Phase

Asset ID: 6001

Sharples

3-phase decanter Sharples P3400 Super-D-Canter. Bowl dimensions 14" x 48", beach angle 10 degree. Max speed of 4000 RPM, Max G force 3160 x G Force. Quasi-axial flow conveyor design. 316 ss rotating assembly & case and cover. P-165, Mounted to a unitized sub-base with vibration isolators. Main drive motor: 40 H.P. TEFC, 1800 RPM, 480 voltage, 3-phase, 60 cycle power required, NEMA-12 enclosure, Reduced voltage starter comes with it. No back drive motor. Built in 1980 - decanter was rebuilt in 2001. P.125 Gearbox Ratio - Max Allowable Torque on Gearbox 1.72kgf m. Capacity from 13 gpm to 75 gpm depending on viscosity of feed and rpm of motor. Rated at 11 ton/hr at infeed of 10% solids (264 TPD max). Price includes removal and loading - any crating or handling for international shipping will be extra.

Condition

Sharples PM75000 Decanter - (2) Units available. RECONDITIONED - WARRANTY. Rated at 270 gpm. ...

Location

Mexico

Decanter PM75000

Asset ID: 1762

Sharples

Sharples PM75000 Decanter - (2) Units available. RECONDITIONED - WARRANTY. Rated at 270 gpm. CENTRIFUGE 29 inch x 92 inch with Gear Units, (95 to 1). Material stainless steel ss316/ss317. Max bowl speed 2600 RPM, 2780 G's, 360 degree cake discharge, 10" single lead conveyor with STC tiles & STC feed zone, half-moon plate dams, fiberglass top cover, feed tube, P180 95:1 gearbox, Includes 175 HP motor 460/3/60/1785PM and new 60 HP AC backdrive. With stand, lube system, polymer feed tube, guards, vibration isolators, control panels, spare parts & tools. New controls with touch screen, vibration switch, and VFD’s for 200 HP and 60 HP. Prior use: Waste water sewage treatment 1984 vintage. Allow 16-18 weeks ARO. There are (2) machines available - priced separately

Condition

Location

### Decanter Skid ### Alfa Laval horizontal solid bowl decanter style with a model...

Decanter Skid

Asset ID: 7889

Alfa Laval

### Decanter Skid ### Alfa Laval horizontal solid bowl decanter style with a model CS5.5-10-Z-TW , 13.9 x 57.5 inch bowl. Capacity of 12-40 gpm. Was last running food & beverage active sludge and municipal waste active sludge (non-abrasive). Electric Reliance motor. 1071SF Rotdiff hydraulic back drive. Baldor super E motor, 7.5HP, 230/460v, 19/9.5 amps,1770rpm, 60Hz, 3 phase. This unit has been reconditioned (rebuilt) with bearings, seal, gasket, balance. BD disc can be added to this machine for additional cost.

Condition

Remanufactured Rebuilt

Location

Utah

Decanter, Gastight ss316

Asset ID: 2350

Siebtechnik Tema

### Siebtechnik Tema SBD-210 gastight short bowl decanter, 316ss. ### - Gas tight decanter...

### Siebtechnik Tema SBD-210 gastight short bowl decanter, 316ss. ### - Gas tight decanter reconditioned by OEM in 2020 Max bowl speed 5000 RPM, 2933 x G, rated @ 11 GPM, 0.45 bar, 5.5 KW XP motor 690/400/3/50, gearbox, 0.37 KW XP backdrive, feed tube, guard, chutes, nitrogen purge system, SS support frame, PLC control panel with 2 VFDs and all documentation. 2013 vintage.

Condition

Sharples P3400 completely reconditioned decanter centrifuge 14 x 48 52,500.00 Carbon steel skid...

Location

Eastern Canada

Sharples P3400 Decanter Centrifuge

Asset ID: 2055

Sharples

Sharples P3400 completely reconditioned decanter centrifuge 14 x 48 52,500.00 Carbon steel skid and guards. 4.25 conveyor with hardfacing 4000 rpm max Non Sanitary P3400 , 15 HP back drive, 40 HP Main Drive 3,100 g's max, 50 GPM Gearbox assembly 125 to 1 gear box ratio All new bearings, seals, mechanical seals, o rings Paint Carbon steel base, White, paint carbon steel sub base white, and stand New main motor coupling and belts and vibration switch Control panel - Decanter Centrifuge control panel with 40 HP Bowl and 15 HP Backdrive 460 VAC / 3 phase power / 60 Hz 120 VAC transformer with protective circuit breakers 24VDC Power Supply with protective circuit breakers NEMA 12 Freestanding enclosure with thermostat controlled cooling fan Flange mount 100 amp disconnect and ground lug 150HP VFD with protective fuses for the Bowl 15HP VFD with protective fuses for the feed pump Emergency Stop Pushbutton

Condition

Location

### Water Cooled 100 Ton Water Cooled Chiller ### - 100 Ton water cooled chiller by Thermal...

Chiller

1 Items

Asset

Description

Condition

Location

Chiller, 100 Ton

Asset ID: 2100

Thermal Care

### Water Cooled 100 Ton Water Cooled Chiller ### - 100 Ton water cooled chiller by Thermal Care. Model MXW100. Built in 2012. Has cooling capacity of 100 tons (352 kw) with a set point range of 20 to 75 Fahrenheit. MCA @ 460v / 3phase / 60Hz -209 amps. MOP @ 460v / 3phase / 60Hz-350 amps. - Rotary screw compressor with integral oil separator and filter. Direct drive at 166 FLA 460v 3/60 = approx 132 KW rated. Motor is probably 200 HP. - Chiller set points from -20F to 75F - Runs on R134a refrigerant. - Stainless steel brazed plate evaporator - PLC Control panel with high resolution 12" screen operator interface. NEMA-12 C-UL 508A listed and labeled control panel. Compact size with easy access to controls and components. Shipping weight is 4,315 lbs.

Condition

Location

Glycerin Distillation Column. 14 inch Distillation Column built in 2006 by Paul Mueller Company....

Columns

7 Items

Asset

Description

Condition

Location

Distillation Column 14"

Asset ID: 8136

Paul Mueller Company

Glycerin Distillation Column. 14 inch Distillation Column built in 2006 by Paul Mueller Company. NEW S/N 357210-89. ASME NB# 43140 MAWP 50 psi @ 450F. Material: 304L stainless steel. 3 pieces - 313 inches overall height. NEW

Condition

Location

Methanol Distillation column. NEW - Built 2006 by Paul Mueller Company. 24" Distillation...

Distillation Column 24"

Asset ID: 8137

Paul Mueller Company

Methanol Distillation column. NEW - Built 2006 by Paul Mueller Company. 24" Distillation Column. S/N 357209 97-99. 4 pieces - 544 inch overall height. ASME MAWP 40 psi @ 250F. Material: stainless steel 304L. NEW. Empty Weight: 6116 pounds

Condition

Location

Hydrolis Column - EnerFab 6000 gallon vessel. MAWP Interior 3000 psig @ 750F, MAWP Exterior 165...

HP Vertical Column

Asset ID: C-210

EnerFab

Hydrolis Column - EnerFab 6000 gallon vessel. MAWP Interior 3000 psig @ 750F, MAWP Exterior 165 psig @ 750F, MDMT - 20 F @ 3000 psig, Jacket MAWP 150 psig @ 750F, MDMT -20F @ 150 psig, S/N 1410086-1. 2 ft I.D. Jacket and 50 ft 6 in OAL

Condition

Location

EnerFab 400 gallon vessel. MAWP Interior 3000 psig @ 750F, MAWP Exterior 165 psig @ 750F, MDMT -...

HP Vertical Column

Asset ID: C-310

EnerFab

EnerFab 400 gallon vessel. MAWP Interior 3000 psig @ 750F, MAWP Exterior 165 psig @ 750F, MDMT - 20 F @ 3000 psig, Jacket MAWP 150 psig @ 750F, MDMT -20F @ 150 psig, S/N 1410086-2. 2 ft I.D. Jacket and 35 ft 6 in OAL

Condition

Location

EnerFab 400 gallon vessel. MAWP Interior 3000 psig @ 750F, MAWP Exterior 165 psig @ 750F, MDMT -...

HP Vertical Column

Asset ID: C-408

EnerFab

EnerFab 400 gallon vessel. MAWP Interior 3000 psig @ 750F, MAWP Exterior 165 psig @ 750F, MDMT - 20 F @ 3000 psig, Jacket MAWP 155 psig @ 750F, MDMT -20F @ 150 psig, S/N 1410085-1. 2 ft I.D. Jacket and 50 ft 6 in OAL

Condition

Location

Packed Column - Fenix Column 8500 gallon, 5.6 ft dia x 79.6 ft SS, SN E-412 (330412.01.13),...

Packed Column Biodiesel Distillation

Asset ID: C-805

Fenix

Packed Column - Fenix Column 8500 gallon, 5.6 ft dia x 79.6 ft SS, SN E-412 (330412.01.13), Design pressure FV/2.0 KG @ 250C. Last used as Biodiesel Distillation Column

Condition

Location

Packed Column - Fenix Column 5400 gallon, 4 ft x 76 ft SS. Last used as Methanol Distillation...

Packed Column Methanol Distillation

Asset ID: C-704

Fenix

Packed Column - Fenix Column 5400 gallon, 4 ft x 76 ft SS. Last used as Methanol Distillation Column

Condition

Location

Acid scrubber. Chemical scrubber, vertical, Sits on reservoir 34" x 60" rectangular with pump. ...

Columns/Scrubber

1 Items

Asset

Description

Condition

Location

Wet Scrubber, Chemical

Asset ID: FB-51

Viron

Acid scrubber. Chemical scrubber, vertical, Sits on reservoir 34" x 60" rectangular with pump. Scrubber is 2 ft dia x 15 ft tall. Designed for vacuum. Mfg is Viron International, Model VCA-36-FRP-0.3-36 Carbon. Serial 13352. Designed for 300 cfm. Has EchoSpan level indicator transmitter and FRP mist eliminator pad at packing depth 28"

Condition

Location

Ingersoll Rand recip air compressor Model P1.5IU-A9, serial P20288T19051. Capacity 4.6 cfm at...

Compressor/Air Compressor

2 Items

Asset

Description

Condition

Location

Air Compressor, Recip 2HP

Asset ID: 2066

Ingersoll Rand

Ingersoll Rand recip air compressor Model P1.5IU-A9, serial P20288T19051. Capacity 4.6 cfm at 135 psig. Voltage 115/1/60 2HP. With integral reservoir tank 20 gallons. Overall size 23" wide x 43" tall. Belt driven quiet operation 75 dBA. This is part of gryphon CBD dryer system belt tensioner and NOT SOLD Separately. Part of an entire CBD extraction system - enter PK6020 to see all components.

Condition

Location

### Reciprocating air compressor and refrigerated dryer ### Emax air compressor, sits on top of...

Air Compressor, Recip plus Dryer

Asset ID: 2052

EMAX

### Reciprocating air compressor and refrigerated dryer ### Emax air compressor, sits on top of its own 80 gallon air receiver. Driven by 7.5 HP motor, 220v 1 phase. Maximum 175 psi and 26 scfm. Includes refrigerated air dryer refrigerant is 134A. Refrigerated dryer is EMAX Model EDRCF1150030. pk6020

Condition

Location

### MVR Gas Compressor built by AC Compressor Corporation ### - Model D24JR. Skid Mounted -...

Compressor/Gas Compressor

2 Items

Asset

Description

Condition

Location

Vapor Compressor (MVR)

Asset ID: K-1651

AC Compressor Corp

### MVR Gas Compressor built by AC Compressor Corporation ### - Model D24JR. Skid Mounted - Single stage centrifugal compressor with Buffer/Educt labyrinth shaft seals, and remote oiler - Includes 2000 HP Reliance squirrel cage induction electric motor, 1800rpm, 4000v 249A 60Hz/3 phase - Includes motor starter - Lufkin gearbox model N1400C Inlet volume: 49,375 ACFM. Serial number 1634-11461. Rated speed: 6012 RPM, temperature: 217F, pressure: 15 PSIA. Discharge pressure: 22.9 PSIA. Removed, ready to load on your truck.

Condition

Location

MVR Vapor Compressor by A C Compressor Corporation. Skid Mounted. Model # D20JR, Serial #...

Vapor Compressor (MVR)

Asset ID: 380-EQ-882

AC Compressor Corp

MVR Vapor Compressor by A C Compressor Corporation. Skid Mounted. Model # D20JR, Serial # 1634-11671. 22,543 ACFM Centrifugal Air Compressor. Single stage with buffered labyrinth type shaft seal. Features a cast iron housing with a stainless steel impeller and shaft. Inlet temperature 223 degrees F, Inlet pressure 15.6 MMH20, Discharge pressure 19.52 MMH20, Rated speed 628 RPM. Maximum continuous speed 6289 rpm, Maximum allowable discharge temperature 400 degrees F, Maximum allowable discharge pressure 15.7 psig. Driven by a Siemens, Type CG II 500 HP, 1775 RPM, 4000 volt motor. Motor rated for 60 amps @ 60 Hz. Compressor is coupled to motor through a Westech high speed gear unit with oil cooler, model # 10705. Drive couplings are by Rexnord and system features oil control and vibration analysis with a Bently Nevada 3300 system. Part of Evaporator package PK-6045 and might not be able to be sold separately - Ask Us. For a list of all components, enter "pkevap" in the keyword search terms box.

Condition

Location

Metering Screw conveyor with Sew-Eurodrive Gear Reducer Type SAF57DRE80M4/MM07/MO, Output...

Conveyor

2 Items

Asset

Description

Condition

Location

Screw Conveyor

Asset ID: MSC-108

Metering Screw conveyor with Sew-Eurodrive Gear Reducer Type SAF57DRE80M4/MM07/MO, Output 3.9-23.79 rpm

Condition

Location

### Vibrating Conveyor ### Link-Belt Vibrating Conveyor. Model # LBL3006. Conveyor is 10" wide ...

Vibrating Conveyor 15 ft

Asset ID: 7329

Link-Belt

### Vibrating Conveyor ### Link-Belt Vibrating Conveyor. Model # LBL3006. Conveyor is 10" wide x 15'-3 1/2" long. Amp is 3.9, 460V, 60Hz, 3 phase. Operating speed is 674 RPM.

Condition

Location

Belt conveyor, rubber cleated 23.625" wide. .Includes hopper infeed. Drive motor is 1/2 HP...

Conveyor/Belt

14 Items

Asset

Description

Condition

Location

Belt Conveyor

Asset ID: 2057

Belt conveyor, rubber cleated 23.625" wide. .Includes hopper infeed. Drive motor is 1/2 HP 230/460 3/60 1725 rpm with Nord gaer unit. Built 2019. Part of an entire CBD extraction system - enter PK6020 to see all components.

Condition

Location

Inclined belt conveyor (last used to feed hopper). Approx size 18" wide x 12 ft long.

Belt Conveyor 12 ft

Asset ID: AF8

Condition

Location

### Belt Conveyor 12 Feet ### Hytrol Belt Conveyor. Serial # 12B601. 12' length with 24" belt.

Belt Conveyor 12 ft

Asset ID: 7330

Hytrol

Condition

Location

### Belt Conveyor 12 Feet ### Hytrol Belt Conveyor. 12' length with 24" belt.

Belt Conveyor 12 ft

Asset ID: 7331

Hytrol

Condition

Location

## Belt Conveyor 13 ft ## Manufactured by EMI. Serial # 16-08271.The model DDC-18-13-40 is a...

Belt Conveyor 13 ft

Asset ID: 7324

EMI

## Belt Conveyor 13 ft ## Manufactured by EMI. Serial # 16-08271.The model DDC-18-13-40 is a heavy-duty, industrial-use, steel-frame incline belt conveyor from the Merit Line series. It is designed for applications such as under-pellet mill scrap handling, parts conveying, and machine tending. (up to 210°F belt resistance). Ideal for taking hot or cool pellets away from the pellet mill. ### Specifications ### * Model Breakdown: DDC (Steel Incline Conveyor) - 18" (Belt Width) - 13' (Length) - 40 (40 FPM Standard Speed). * Construction: 12-gauge steel frame for maximum industrial wear. * Dimensions: 13-foot length with an 18-inch wide belt. * Drive: Direct drive with a 1/3 HP AC motor (110V input standard) and a sealed, maintenance-free gear reducer. * Speed: 4–40 FPM (Feet Per Minute) variable speed drive. * Belting: Double V-guided, FDA-approved, white PVC belt. * Included Features: 4" high side rails (overlapping the belt) * Capacity: Rated for up to 150 lbs. maximum load

Condition

Location

### Belt Conveyor 16 Feet ### Hytrol Belt Conveyor. 16 feet length, 24 inches wide.

Belt Conveyor 16 ft

Asset ID: 7328

Hytrol

Condition

Location

### Belt Conveyor ### Belt conveyor manufactured by Hytrol. 17 feet long, 18 1/2" width....

Belt Conveyor 17 ft

Asset ID: 7321

Hytrol

### Belt Conveyor ### Belt conveyor manufactured by Hytrol. 17 feet long, 18 1/2" width. Installed cooling fans.

Condition

Location

## Belt Conveyor- 22 Feet ## ### Specifications: ### - Dimensions: 22-foot length,18 1/2" belt...

Belt Conveyor 22 ft

Asset ID: 7323

Hytrol

## Belt Conveyor- 22 Feet ## ### Specifications: ### - Dimensions: 22-foot length,18 1/2" belt width, 20"–22" overall frame width * Construction: 12-gauge, powder-coated steel channel frame * Performance: ~65 Feet Per Minute (FPM) speed; up to 225 lbs per linear foot capacity * Drive: Center drive or end drive

Condition

Location

## Belt Conveyor- 22 Feet ## ### Specifications: ### *Dimensions: 22-foot length,18 1/2" belt...

Belt Conveyor 22 ft

Asset ID: 7333

Hytrol

## Belt Conveyor- 22 Feet ## ### Specifications: ### *Dimensions: 22-foot length,18 1/2" belt width, 20"–22" overall frame width * Construction: 12-gauge, powder-coated steel channel frame * Performance: ~65 Feet Per Minute (FPM) speed; up to 225 lbs per linear foot capacity * Drive: Center drive or end drive

Condition

Location

### Hytrol Belt Conveyor ### * Belt Width: 18 1/2 inches (likely 18" or 20" nominal belt...

Belt Conveyor 22 ft

Asset ID: 7320

Hytrol

### Hytrol Belt Conveyor ### * Belt Width: 18 1/2 inches (likely 18" or 20" nominal belt size) * Overall Frame Width: 20" to 22" (approx. 18-1/2" belt + frame allowance) * Length: 22 Feet * Construction: 12-gauge formed steel channel frame * Belt Type: Black 140 interwoven polyester, nitrile impregnated (standard) * Drive: Center drive (standard for long conveyors) or End Drive * Motor: 1/2 HP, 208/230/460V/3Ph, 60Hz (TEFC standard) * Speed: 65 Feet Per Minute (Standard) * Capacity: Typically 225 lbs maximum per linear foot

Condition

Location

Belt Conveyor Manufactured by TCI. Serial # 18122710. Belt is 36" width x 32' length.

Belt Conveyor 32 ft

Asset ID: 7326

TCI

Condition

Location

Biomass belt conveyor for bulk conveying. Stainless steel frame with cleated belt. In a "Z"...

Biomass Belt Conveyor ss

Asset ID: 8569

Biomass belt conveyor for bulk conveying. Stainless steel frame with cleated belt. In a "Z" configuration. Driven by a 1/2 HP motor at 1720 rpm 230/460v 3/60. Conveyor is 19 ft long x 6ft-6in tall x 31 inches wide. Pick-up height at bottom infeed is 8.5 inches. Belt runs slow - approx. a few feet per minute; material is either rubber or perm.

Condition

Location

Biomass stainless steel conveyor, approx size 16 inch wide x 24 ft long. Belt conveyor with...

Biomass Conveyor ss

Asset ID: 8561

Marathon

Biomass stainless steel conveyor, approx size 16 inch wide x 24 ft long. Belt conveyor with flights. Driven by 1 HP motor 230/460v 3/60 TEFC.

Condition

Location

### Inclined Bag Flattener Conveyor ### Slidell inclined flattener. Model # 1550. Travel length...

Conveyor ( Bag Flattener )

Asset ID: 8821

Slidell

### Inclined Bag Flattener Conveyor ### Slidell inclined flattener. Model # 1550. Travel length of belt/flattener is: 13' discharge section and 4.5' infeed section. Belt width is 19", frame width is 24". Overall physical dimensions are 17' x 3' x 9'. Flattener was in operation through early 2026. Now idled and stored in protected warehouse

Condition

Conveyor for hopper. Stainless steel screw conveyor 9" OD x 118" long with 8" screw. Belt driven...

Location

Pennsylvania

Conveyor/Screw

1 Items

Asset

Description

Condition

Location

Screw Conveyor, ss 10 ft

Asset ID: AF5

Conveyor for hopper. Stainless steel screw conveyor 9" OD x 118" long with 8" screw. Belt driven with 5 HP motor. Trough inlet x 4" pipe outlet with cylinder driven knife gate valve.

Condition

Location

## **Gryphon Biomass Hot Air Belt Dryer** ## - Gas fired recirculating counter current air...

Dryer/Belt

1 Items

Asset

Description

Condition

Location

Biomass Belt Dryer Gryphon

Asset ID: 2042

Gryphon

## **Gryphon Biomass Hot Air Belt Dryer** ## - Gas fired recirculating counter current air dryer. Model A.318. - Dryer section is 3 ft wide x 18 ft long. - Evaporation rate (condensate rate) will be approximately 213 lbs/hr of water - Used for drying hemp with inlet moisture of 50-80% and outlet moisture of 7% to 11% moisture running at 3,000 pouds per 24 hours inlet and approximately 1,000 pounds per 24 hours dry mass outlet. - Natural gas burner rated at 1.5 MMBTU with all gas train valves, firing controls and Honeywell fire eye safeties. Supplemental electric heaters in each of the three sections. - Air flow is by blower rated at 2500 scfm with VFD drive AB PowerFlex 753. AirPro Fan Type HPSM254 high pressure radial shrouded fan. 600 rpm serial 23894 40HP built on 2008. - Six VFD drives in all Allen Bradley PowerFlex 525. - Condenser coils. - Includes infeed sifter and lid lift assembly for easy maintenance and operation. - Includes fabricated feed belt 23.625" wide cleated belt. - Full automation by Rockwell Allen Bradley and controls provided. Software plc controlled air volume, temperature and cycle time. Automated washing of chambers, air filter, and belt. - CTS cooling tower and condenser unit is part of the package. No need for baghouses, scrubbers, or exhaust stacks. See brochure in link for more information. Unit was purchased new in 2019 - only has 1,289 hours operation. Last used for hemp drying. Includes spares: (4) condenser filters, 1 dryer belt, bed skirts & spacers. Part of an entire CBD extraction system - enter PK6020 to see all components.

Condition

Location

Hankison heatless regenerative air dryer Model DH-950. Rated at 590 scfm, 100 psig at -40 PDP. ...

Dryer/Compressed Air

1 Items

Asset

Description

Condition

Location

Air Dryer, Regenerative Desiccant

Asset ID: B2098

Hankison

Hankison heatless regenerative air dryer Model DH-950. Rated at 590 scfm, 100 psig at -40 PDP. Desiccant activated alumina. S/N 3338-1-9505-13SD. Desiccant tanks ASME MAWP 250 psig at 200F.

Condition

Location

### GEA Niro Swirl Fluidizer System - Flash Dryer ### Complete skid with inlet air gas heater,...

Dryer/Flash Dryer

2 Items

Asset

Description

Condition

Location

Swirl Fluidizer Flash Dryer System Niro

Asset ID: AF94

GEA Niro

### GEA Niro Swirl Fluidizer System - Flash Dryer ### Complete skid with inlet air gas heater, fluidizing slurry tank, controls. This is an agitated flash dryer. GEA Model 6.3 Mobile Unit, ID No. 128-1650-1-01 built in 2009. Stainless steel skid size 86" x 87" x 82" tall. Fluidizing slurry tank stainless is approx 3 ft dia x 3 ft tall with bottom scraped-wall blade agitator and outlet to screw conveyor. - Air flow 450-630 kg/hr - Inlet temp 100-350C - Outlet temp 60-150C - Water evaporation 0-55 kg/hr - Max powder rate 100 kg/hr - Max feed rate 150 kg/hr - Gas supply natural gas or propane Used for drying cellulose pastes prior to filtration. In feed tank, the vertical bottom driven agitator will disintegrate the viscous feed material into homogeneous feed. A specialized auger then pushes the slurry to the drying chamber. The Niro SWIRL FLUIDIZER™ offers a cost-effective solution for drying of pastes, filter cakes, and highly viscous liquids for obtaining a fine, homogeneous and non-agglomerated dry product – in one compact process step. ### See detailed presentation in the Document Links ###

Condition

Location

### Vacuum Dehydration Unit ### Compact vacuum dehydration unit to remove free water, emulsified...

Vacuum Dehydration Unit

Asset ID: 2087

IFS

### Vacuum Dehydration Unit ### Compact vacuum dehydration unit to remove free water, emulsified water, and minor impurities from oil. Designed for most lubricating, EHC and hydraulic fluids down to 150 ppm. Possible to use for dewatering used cooking oil (UCO) upon proper testing and approval. Standard features: 300 gph process flow rate, 5kW heater with programmable temperature controller, dry seal vacuum pump,, adjustable flow controls, skid mounted with casters, controls. 440v 3/60. These units are built to order - allow 10-12 weeks ARO. Photo is a catalog photo.

Condition

### Complete Rotary Dryer System - 2 drums, 3 pass ### Stainless steel grade 409, late model...

Location

Michigan

Dryer/Rotary

3 Items

Asset

Description

Condition

Location

Rotary Dryer System Dual Drum

Asset ID: 8810

Aeroglide

### Complete Rotary Dryer System - 2 drums, 3 pass ### Stainless steel grade 409, late model rotary dryer system with cooling drum. The 3 pass rotary dryer drums continually lifts and showers the product through the moving air stream. System is based on dual (2) 13' X 60' triple-pass rotary drum dryers with trunnion and drives with controls, motors, including natural gas burners rated at 68 MMBTU/h with an 8:1 turndown, max thermal output of 42.200.000 kj/h, discharge cyclone, multi-clones, fans with motors, stack, all relating ducting and steel structure. These dryers are fired with natural gas or propane. Main cyclone at discharge of dryer has 3.66m diameter, secondary multicyclones (8/dryer) are 1.07m diameter each, stack is 37m above grade, Volumetric airflow rated 30.68 cubic meter/second. See motor list for complete list - dryer drum driven by 150 HP motor (2), exhaust fans 400HP motor (2), cooling exhaust fan 100HP Original use was with wet distillers grain (corn) at 151,463 lbs/hr infeed at 67% moisture dried to 10% moisture for 21,071 lbs/hr output - see chart. Temp out of dryers is 185 F, and out of cooler is 25F above ambient. Evaporation rate is 45,439 lbs/hr (one dryer)

Condition

96 inch dia Davenport Rotary Steam Dryer. Used Rotary Counter Flow Steam Tube. Shell & tube: 304...

Location

Southeast U.S.

Rotary Steam Dryer

Asset ID: 5380

Davenport

96 inch dia Davenport Rotary Steam Dryer. Used Rotary Counter Flow Steam Tube. Shell & tube: 304 stainless steel. 104” OD x SCH.10. Pitch 0 DEG to 32 DEG. 46’9 O.A.L. 30HP motor, 349 RPM. Batch capacity: 80,000 lbs./hr. Shell rated for 1 ATM of pressure @ 370F. Tube rating 175PSIG @ 370F. Steam Rating: 130PSIG. Manufactured by Davenport. Previous Use: PTA Dryer.

Condition

Location

### Rotary Steam Dryer stainless steel- Evap Rate 900 lb/hr ## Rated at 1500 lbs/hr capacity...

Rotary Steam Dryer ss

Asset ID: PK-2347

Drying Solutions

### Rotary Steam Dryer stainless steel- Evap Rate 900 lb/hr ## Rated at 1500 lbs/hr capacity with co-current single-pass superheated steam. Approx conveying air feed 1,973 acfm at 266F to 288F. (Max inlet temp 680F). Last was running soybean meal - Evaporation rate 900 lb/hr. Set for 65% moisture IN and 5% moisture OUT at 1500 lb/hr feed rate. - Dryer drum size is 1800 mm dia x 14750 mm drum length (5.9 ft dia x 48.4 ft length). Co-current flow. MOC stainless steel 304L. Cup flights around the perimeter - hollow middle - Natural gas fired burner with controls and fire-eye, Blower, belt drive. Rated at 7.3 MMBTU/hr - This is a steam dryer set up for either steam injection or water injection. Steam heated by hot air interchanger to 680F. Steam usage 4087 lbs/hr at 266F (approx 25 psig) - Cyclone and vertical condenser - Drag conveyer and 3 screw conveyors - All controls including plc and touch screen HMI built into panel - Electrical 200 amp service 460v. Starters and VFD's are located in the control cabinet. There are 4 VFD's. 60HP blower, 60HP conveying fan, 40 HP burner, 40HP drum motor. - Footprint of entire system 65.4 ft x 36.4 ft x 16.4 ft tall (19950 mm x 11110 mm x 5000 mm tall) In excellent operating condition. Idled in mid 2022. Tested operation again for 2 weeks in Aug 2024. See drawings in LINK **Price includes removal** and loading on your trucks. (no freight but we can quote for that if desired)

Condition

Location

### Mini Spray Dryer Like NEW ### Buchi Mini Spray Dryer S-300 Advanced, 220°C with a two-fluid...

Dryer/Spray Dryer

1 Items

Asset

Description

Condition

Location

Mini Spray Dryer

Asset ID: 8825

Buchi

### Mini Spray Dryer Like NEW ### Buchi Mini Spray Dryer S-300 Advanced, 220°C with a two-fluid nozzle. Serial number: 1100142181. Power 2,300 maximum watt, 220/240 volts, 50/60Hz. **Was only used one time** Evaporation capacity: 1.0 L/h for H2O, higher for organic solvents Final particle size: 1 - 60 µm Yield: up to 70 % See Links for details

Condition

Air core reactors by Trench Electric, Canada. Dry type, air cooled, rated at 2000 KVA, system...

Location

Massachuetts

Electrical

5 Items

Asset

Description

Condition

Location

Air Core Reactors 2000 KVA

Asset ID: B2094

Trench Electric

Air core reactors by Trench Electric, Canada. Dry type, air cooled, rated at 2000 KVA, system volts 13.8 kV, 60 Hz, 1 phase. Rated impedance 0.5 ohm. Built 1993. Serial numbers 117770-4, 117770-3, and 117770-6. Weight 2150 pounds each. Two assembled, one in pieces. Qty (3) - sold as a LOT

Condition

Location

Square D disconnect for 100HP vacuum pumps 460v. Quantity (2) - priced separately.

Disconnect 100HP

Asset ID: AF91

Square D

Condition

Location

Gavita 1000 watt grow light. 120-240v AC

Grow Lights

Asset ID: V2214

Gavita

Condition

Location

MCC-1 Motor Control Center - Square D

MCC

Asset ID: MCC-1

Square D

Condition

Location

MCC-2 Motor Control Center - Square D

MCC

Asset ID: MCC-2

Square D

Condition

Location

Double vertical section with (2) Allen Bradley vacuum motor starters 1520-V4DBDA-1. rated at ...

Electrical/MCC

1 Items

Asset

Description

Condition

Location

Vacuum Starters Contactors, HV

Asset ID: 2035

Allen Bradley

Double vertical section with (2) Allen Bradley vacuum motor starters 1520-V4DBDA-1. rated at 2500 - 7200v 400A. Equipped with AB power monitors 3000 and GE 369 Motor Management Relays and GE 737 Feeder protection relays.

Condition

Location

Marathon electric motor. Frame 286T. 1765 RPM. 230/460V

Electrical/Motor

16 Items

Asset

Description

Condition

Location

Motor

Asset ID: M107

Marathon

Condition

Location

Motor

Asset ID: M1012

Toshiba

Toshiba electric motor

Condition

Location

Pacemaker 100 HP electric motor. Frame 405TS. 1730 RPM. 230/460V

Motor 100 HP

Asset ID: M111

Pacemaker

Condition

Location

GE 100 HP electric motor. Frame 405TS. 1780 RPM. 230/460V, 140/70A.

Motor 100 HP

Asset ID: M103

GE

Condition

Location

Marathon 30 HP electric motor. Frame 286TS. 3545 RPM. 230/460, 68.4/34.2A.

Motor 30 HP

Asset ID: M1005

Marathon

Condition

Location

Marathon Electric Blue Chip 30 HP electric motor. EPFC enclosure, 3530 RPM. Built in 2010. Model...

Motor 30 HP

Asset ID: H114

Marathon Electric Blue Chip

Marathon Electric Blue Chip 30 HP electric motor. EPFC enclosure, 3530 RPM. Built in 2010. Model JJ286TSTGP4001CDL. Frame 286TS, 230/460V, 72/36 FLA, 60 Hz. SF 1.15 continuous duty. Physical weight 205 pounds

Condition

Location

GE 40 HP electric motor. Frame 324TS. 3565 RPM. 460V, 43.7A.

Motor 40 HP

Asset ID: M101

GE

Condition

Location

GE 40 HP electric motor. Frame 324TS. 3565 RPM. 460V, 43.7A.

Motor 40 HP

Asset ID: M102

GE

Condition

Location

Pacemaker 40 HP electric motor. Frame 404T. 1185 RPM. 220/440V, 147/73.5A.

Motor 40 HP

Asset ID: M108

Pacemaker

Condition

Location

Marathon Electric Blue Chip Severe Duty 40 HP electric motor. NEW 3545 RPM. Built in 2005. Model...

Motor 40 HP

Asset ID: H113

Marathon Electric Blue Chip

Marathon Electric Blue Chip Severe Duty 40 HP electric motor. NEW 3545 RPM. Built in 2005. Model CN324TSTGP4001CDL. 230/460V, 95/47.5 FLA, 60 Hz. Enclosure EPFC, Frame 324TS, continuous duty. Physical weight 584 pounds.

Condition

Siemens-Allis electric induction 400 HP motor, vertical shaft. Model 145, S/N 1-5117-51041-1-1....

Location

Grant city, MO

Motor 400 HP

Asset ID: H2001

Siemens-Allis

Siemens-Allis electric induction 400 HP motor, vertical shaft. Model 145, S/N 1-5117-51041-1-1. Type FODV. Frame 507UP. 52.8 Amps, 4000V, 60 Hz. 1780 RPM. Includes 400W space heater. Last service was on cooling tower pump. The motor was rotated in August 2025 and it turns freely.

Condition

Location

Marathon Electric 450 HP Motor, 460V, 60 Hz, 3565 RPM, Frame 449TSD

Motor 450HP

Asset ID: B2083

Marathon Electric

Condition

Location

Marathon 50 HP electric motor. Frame 365T. 1180 RPM. 230/460, 124/62A.

Motor 50 HP

Asset ID: M106

Marathon

Condition

Location

Marathon Electric Blue Max electric 60 HP motor. NEW, old stock. 3000 RPM. Model EVD...

Motor 60 HP

Asset ID: H109

Marathon Electric Blue

Marathon Electric Blue Max electric 60 HP motor. NEW, old stock. 3000 RPM. Model EVD 364THFS8046BT W. S/N WAA033158. Enclosure TEBC, Frame 364TC. 230/460V, 60Hz. Built 2007 - not used, instorage since then

Condition

Location

Pacemaker 60 HP electric motor. Frame 404T. 1185 RPM. 220/440V, 147/73.5A.

Motor 60 HP

Asset ID: M109

Pacemaker

Condition

Location

Pacemaker electric motor 60HP 1200rpm

Motor 60HP

Asset ID: M110

Pacemaker

Condition

Location

Two stainless steel control panels with Allen Bradley PanelView touch screen and plc. Formerly...

Electrical/Panels

7 Items

Asset

Description

Condition

Location

Control Panels

Asset ID: V2243

Two stainless steel control panels with Allen Bradley PanelView touch screen and plc. Formerly used as reactor control panels Lot 116. Qty (2) - priced separately

Condition

Location

Two enclosed electrical boxes. Formerly lot 117 &118. Priced for the set of (2)

Electrical Boxes

Asset ID: V2344

Condition

Location

Square D fuse panel disconnect. Rated at 400A. 3 fuses, 480v 3/60

Fuse Panel 400A

Asset ID: V2254

Square D

Condition

Location

Square D fuse panel disconnect. Rated at 600A. 3 fuses, 480v 3/60

Fuse Panel 600A

Asset ID: V2255

Square D

Condition

Location

Heater Control Cabinet

Asset ID: V2251

Heater control cabinet

Condition

Location

Control panel with cooler on side ready for your electronics and use. Mainly empty. Approx size...

Logic Control Panel

Asset ID: V2252

Magnum Engineering

Control panel with cooler on side ready for your electronics and use. Mainly empty. Approx size 6' x 6' x 1' deep with (2) 32" doors

Condition

Location

Control panel with cooler on side ready for your electronics and use. Mainly empty. Approx size...

Logic Control Panel

Asset ID: V2253

Magnum Engineering

Control panel with cooler on side ready for your electronics and use. Mainly empty. Approx size 6' x 6' x 18"' deep with (2) 32" doors

Condition

Location

S&C metal-enclosed switchgear.13.8 kV, main bus 600 A. Three phase 60 Hz. Catalog number CDA-749682

Electrical/Switchgear

3 Items

Asset

Description

Condition

Location

Switchgear 13.8 kV

Asset ID: B2100

S&C

Condition

Location

### Siemens 3000A Switchgear ### 480 volts - 480Y/277V 60 Hz 3 phase. 4 Sections

Switchgear 3000A

Asset ID: 7336

Siemens

Condition

Location

### Gas Insulated Switchgear (GIS) 69kv ### ABB switchgear 69kv - insulated gas, small...

Switchgear, Gas Insulated 69kv (GIS)

Asset ID: B2111

ABB

### Gas Insulated Switchgear (GIS) 69kv ### ABB switchgear 69kv - insulated gas, small footprint (GIS) with leak tight Sulfur Hexafluoride gas (SF6). Model ELK-04 - Two (2) 69kv distribution busses with disconnects, - Eight (8) 72kv feeder circuit breakers, ELK-04 - Four (4) tie breakers - Panel - All inside protected building - never energized or used See 16 page detail sheet attached in LINKS. We can offer removal and reconditiooning proposals for ths equipment

Condition

Location

### Transformer ### Liquid-Filled MTR Mini-Pak Padmounted Transformer- 25 KVA 2400VGY –...

Electrical/Transformer

4 Items

Asset

Description

Condition

Location

Transformer (25kva)

Asset ID: 7882

Hitachi Energy

### Transformer ### Liquid-Filled MTR Mini-Pak Padmounted Transformer- 25 KVA 2400VGY – 240/120V radial feed, one phase, 60Hz. Serial # 1LUJ250178772388. Includes bushings: loadbreak inserts, bushing wells and secondary studs. Fuses: partial range cl fuse in series with bayonet. Pressure relief valve. Manufactured by Hitachi Energy. Two available. Priced separately.

Condition

### Transformer ### Liquid-Filled MTR Mini-Pak Padmounted Transformer- 50 KVA 2400VGY –...

Location

Missouri

Transformer (50kva)

Asset ID: 7883

Hitachi Energy

### Transformer ### Liquid-Filled MTR Mini-Pak Padmounted Transformer- 50 KVA 2400VGY – 240/120V radial feed, one phase, 60Hz. Serial # 1LUJ250178772392. Includes bushings: loadbreak inserts, bushing wells and secondary studs. Fuses: partial range cl fuse in series with bayonet. Pressure relief valve. Manufactured by Hitachi Energy. Two available. Priced separately.

Condition

45 kVA Siemens Dry Type Energy Efficient Transformer, kVA 45, 3 phase, 60 Hz, High Side 480V, Low...

Location

Missouri

Transformer 45 kVA

Asset ID: 7317

Siemens

45 kVA Siemens Dry Type Energy Efficient Transformer, kVA 45, 3 phase, 60 Hz, High Side 480V, Low Side 208V/120V

Condition

Location

Transformer - Used 47.7 MVA by ABB (Asea Brown Boveri, Power T&D Company) Made in: Saint Louis,...

Transformer 47.7MVA ABB

Asset ID: 8103

ABB

Transformer - Used 47.7 MVA by ABB (Asea Brown Boveri, Power T&D Company) Made in: Saint Louis, MO Type: 47.7 MVA Oil-filled transformer, Type SL, Non-PCP; Cu/Cu Specifications: - Three-phase, 60 Hertz - Class: OA/FA/FA - Windings: 11,500 GRDY/66,395 Volts, 13,800 Volts - Capacity: 28,600/38,100/47,700 KVA - Temperature Rise: 65°C average - Impedance: 10.49% at 28,600 LVA, 115,000 to 13,800 Volts - Test Levels: High Voltage: 550 KV; Low Voltage: 110 KV - Oil Volume: 4,822 gallons

Condition

### VFD Variable Frequency Drives by ABB ### **Priced for the LOT of all 15** - Variable...

Location

Northeast US

Electrical/VFD

2 Items

Asset

Description

Condition

Location

VFD (LOT of 5HP and 1HP) Qty 15 NEW

Asset ID: V7898

ABB

### VFD Variable Frequency Drives by ABB ### **Priced for the LOT of all 15** - Variable Frequency Drive 1HP. Manufactured by ABB. Model # ACS355-03U-04A7-2. Input voltage 208/240V, 50/60Hz, 3PH. Output: 4.7 KV-A. New-old stock. Quantity (9) available, - Variable Frequency Drive 5HP. Manufactured by ABB. Model # ACS355-03U-17A6-2. Input voltage 208/240V, 50/60Hz, 3PH. Output 19 KV-A. New-old stock Quantity (6) available. These 15 VFD's are sold as a package.

Condition

Location

SEW variable frequency drives (VFD) Movidrive. Inverter. SEW part number 08249571. Type...

VFD 7.5 HP

Asset ID: AF90

SEW

SEW variable frequency drives (VFD) Movidrive. Inverter. SEW part number 08249571. Type MDX61B0055-5A3-4-OT. Size 5.5KW (7.5HP). Input 200-240V with 3HP output. Small footprint 105mm x 314mm weighing 2.8kg. Quantity (10) - priced separately

Condition

Location

### Elevator Leg ### Elevator leg. Manufactured by Meyer. Model # PA-462-24-S. 32 ft. tall....

Elevator Leg

2 Items

Asset

Description

Condition

Location

Elevator Leg 32 ft

Asset ID: 7325

Meyer

### Elevator Leg ### Elevator leg. Manufactured by Meyer. Model # PA-462-24-S. 32 ft. tall. Serial number 6190. Standard poly buckets are 24" long, 6" width, 4" depth. Produces at 9TPH.

Condition

Location

### Elevator Leg,, vertical Z conveyor ### Meyer simplex conveying elevator Elevator leg....

Elevator Vertical Z Conveyor

Asset ID: 7332

Meyer

### Elevator Leg,, vertical Z conveyor ### Meyer simplex conveying elevator Elevator leg. Manufactured by Meyer. 32 ft. tall. Standard poly buckets are 24" long, 6" width, 4" depth. Driven by 2 HP motor. Designed for product density of 52 lbs/cu ft

Condition

Location

### Oil Dryer - Vacuum Dehydration Unit ### **Wintek Corporation Dehydration Unit. Like NEW -...

Evaporator

9 Items

Asset

Description

Condition

Location

Dehydration Unit Oil Dryer 21 gpm

Asset ID: 6227

Wintek

### Oil Dryer - Vacuum Dehydration Unit ### **Wintek Corporation Dehydration Unit. Like NEW - only 31 run hours!! Evap Rate up to 23 lb/hr water** This DeHy is a flash tower with condensate/receiver and vacuum system. Capacity feed content is designed for 12 to 21 gpm feed oil (5,492 to 10,000 lbs/hr) with up to 0.25% water and will dry to 0.02% water - based on soy oil modeled as a triglyceride. System consists of feed heat exchanger, a flash tank, a transfer pump, a pre-condenser, receiver tank with transfer pump, and a 10HP liquid ring vacuum system. Flash tower is cs 16 inch dia. Dehydration Unit is used to remove the water from your feed oil. When hot feed oil is exposed to a high vacuum, the water will flash into water vapor and be removed by the vacuum system. This system is skidded - removed and ready to load. Loading fee may apply depending on customer requirements and destination. See complete dehy design specs in attached file (link). NOTE: This unit only has 31 working hours on it and was in working order in a biodiesel plant when idled in 2018. It has been moved outside to a laydown yard in 2023. Unit will need reconditioning. The manufacturer, Wintek, still supports this unit and can recondition it in their NJ factory.

Condition

Location

Evaporator system rated at 45,000 lbs/hr. Unitech Titanium falling film evaporator manufactured...

Evap System

Asset ID: PK-6045

Unitech Titanium

Evaporator system rated at 45,000 lbs/hr. Unitech Titanium falling film evaporator manufactured in 1993 but unused until 2008 then operated for approximately 9 months. Includes Incoloy 825 vapor body, 15,862 SqFt heat transfer section with 872 Grade 2 Titanium 2 inch OD tubes x 36 ft long; and MVR compressor driven by a 500HP motor. Design train capacity is 92 GPM, distillate flow 83.95 gpm. This converts to 44,457 lbs/hr water evaporation. Price includes manual valves and selected ss304 and ss316 piping manifolds, and structural foundation for evap vessel and deaerator. Ladders, grating, and access steel also available.

Condition

Location

Evaporator rated at 45,000 lbs/hr. Unitech Titanium falling film evaporator manufactured in 1993...

Falling Film Evaporator

Asset ID: 380-EQ-870

Unitech

Evaporator rated at 45,000 lbs/hr. Unitech Titanium falling film evaporator manufactured in 1993 but unused until 2008 then operated for approximately 9 months. Includes Incoloy 825 vapor body, 15,862 SqFt heat transfer section with 872 Grade 2 Titanium 2 inch OD tubes x 36 ft long; and MVR compressor driven by a 500HP motor. Design train capacity is 92 GPM, distillate flow 83.95 gpm. This converts to 44,457 lbs/hr water evaporation. The system was evaporating water from canola isolate. Specific gravity was about 8 lb/gal. So Feed in was approximately 173 gpm (83,000 lb/hr) [feed pump is actually rated at 215 gpm] with 89 gpm (44,457 lb/hr) water evap = 84 gpm out (40,300 lb/hr). This is the Evaporator and structure only - Part of Evaporator package PK-6045 and might not be able to be sold separately - Ask Us. For a list of all components, enter "pkevap" in the keyword search terms box.

Condition

Location

## Molecular Sieve Dehydration Unit (MSDU) ## For drying liquid phase alcohols or solvents by...

Molecular Sieve Alcohol Dehydration Unit

Asset ID: 1760

Wintek

## Molecular Sieve Dehydration Unit (MSDU) ## For drying liquid phase alcohols or solvents by molecular sieve dehydration. Wintek Model MSDU-M02.05, serial 110401. The unit is steam regeneration, 600 volt, 3 phase, 60Hz. The capacity is 2 gallons per minute. Includes a 10HP vacuum pump and a 1HP transfer pump. Complete system wired and piped, mounted on skid. - Operation This Liquid Phase MSDU Design passes a liquid stream of wet alcohol or solvent through a column filled with molecular sieve beads in a process known as molecular sieve dehydration. The bed of sieve beads adsorbs water molecules from the liquid as it passes through it. This occurs due to polar attraction. The internal surfaces of the molecular sieve adsorbs more of the water as the bulk liquid flows through the column. This continues until the molecular sieves are at capacity, and dried alcohol product (or solvent) exits the column. This process continues until the sieve becomes saturated with water, at which time the molecular sieve must be changed, or regenerated. Molecular Sieve Dehydration (MSDU) can provide considerable energy savings (up to 50%) compared to distillation NOTE: This unit was in working order when idled in 2018. It has been moved outside to a laydown yard in 2023. Unit will need a complete reconditioning. The manufacturer, Wintek, still suports this unit and can recondition it in their NJ factory

Condition

Location

### Vertical Condenser Rotary Evaporator 50L ### - 50L Rotary Evaporator - voltage 220 single...

Rotary Evaporator, Lab Size 50L

Asset ID: 2354

### Vertical Condenser Rotary Evaporator 50L ### - 50L Rotary Evaporator - voltage 220 single phase - Chiller DLSB-50/30, voltage 220v single phase. - Rotate speed 0-122 rpm - Very few hours - Spare parts package- Does not include vacuum pump The rotary evaporator can be rotated under constant temperature and under negative pressure to form a film, and is condensed and recovered in the evaporation solvent. It is especially suitable for concentration, crystallization, separation and recovery of heat sensitive materials. It is an important equipment for scientific research, pilot test and production in bio-pharmaceutical, chemical, food and other industries.

Condition

Rotary Evaporator 10L - Across 10L rotovac Solvent Vap Model SE26. See data sheet. As an...

Location

Tennessee

RotoVap 10L Rotary Evaorator

Asset ID: V2205

Across

Rotary Evaporator 10L - Across 10L rotovac Solvent Vap Model SE26. See data sheet. As an additional cost, we can add an Across International T40 chiller -40F to ambient, 220v single phase. Check for availability

Condition

Location

## Cherry Burrell Thin Film Evaporator ## Thin film evaporator model 36-144. Used Turba Film...

Thin Film Evaporator Dryer

Asset ID: 7112

Cherry Burrell

## Cherry Burrell Thin Film Evaporator ## Thin film evaporator model 36-144. Used Turba Film Processor wiped film evaporator. Scraped surface area 106 sq ft. Model 36-144, serial 35463EA, mfg number A4128. All contact surfaces are 304 stainless steel. Has 2 sections, designed for steam in jacket. ASME MAWP shell FV at 400F, jacket 150 psig at 400F. Nat'l Bd# 925. Driven by 40 HP motor 1182 rpm in/260 rpm at dryer. - ***Capacity depends on moisture and feed***. In general this evaporator can evaporate 30 pounds of water per hour per sq ft surface area. This evaporator has 106 sq ft surface area so it should be able to evaporate up to 3,180 pounds of water/hr. It was operating on lecithin (gums) drying and was doing 10 TPD (833 #/hr). - The jacket passed hydrotest April 2023. - Physical size 36" dia x 144" tall for 252 inches OAH. Weight of dryer only empty 13,200 pounds. Parts of a 3-stage steam ejector barometric vacuum system are available As Is - On pallet - This evaporator is the one on the right (without the blue writing) - We can sandblast and prime for $1500 extra - Equipment has been removed and is ready to load on your truck - price includes removal & loading. Sold As Is - We can also offer reconditioned state. RD-78

Condition

Location

Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Scraped...

Thin Film Evaporator Dryer

Asset ID: 7135

Cherry Burrell

Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Scraped surface area 106 sq ft. Model 36-144, S/N 35465EA, Mfg # A4154. All contact surfaces are 304 stainless steel. Has 2 sections, designed for steam in jacket. ASME MAWP shell FV at 400F, jacket 150 psig at 400F. Nat'l Bd# 927. Belt Driven by 40 HP motor 1182 rpm in/260 rpm at dryer (missing motor). Capacity depends on moisture and feed - on lecithin (gums) drying it was doing 10 tpd (833 #/hr). Physical size 36" dia x 144" tall for 252 inches OAH. Weight of dryer only empty 13,200 pounds. Equipment has been removed and is ready to load on your truck - price includes removal & loading. We can also offer in reconditioned state.

Condition

Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Serial...

Location

Bethany, MO

Thin Film Evaporator Dryer

Asset ID: 7141

Cherry Burrell

Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Serial no. A4156. Scraped surface area 106 sq ft. Model 36-144. All contact surfaces are 304 stainless steel. Has 2 sections, designed for steam in jacket. ASME National Board # 929., ASME MAWP shell FV at 400F, jacket 150 psig at 400F. Direct Driven through a Nord 6.74:1 gear reducer by 40 HP motor 1182 rpm in/260 rpm at dryer. Has a standard mechanical seal. Capacity depends on moisture and feed - on lecithin (gums) drying it was doing 10 tpd (833 #/hr). Physical size 36" dia x 144" tall for 252 inches OAH. Weight of dryer only empty 13,200 pounds. Equipment has been removed and is ready to load on your truck - price includes removal & loading. We can also offer in reconditioned state.

Condition

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81739 FSPN-1100...

Location

Bethany, MO

Filters

3 Items

Asset

Description

Condition

Location

Bag Filter

Asset ID: BDFB-001

Pall Filter Specialists

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81739 FSPN-1100 #4 C/S

Condition

Location

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81728 FSPN-355...

Bag Filter

Asset ID: BDFB-002

Pall Filter Specialists

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81728 FSPN-355 #4 C/S

Condition

Location

Vertical Leaf Filter 3.58 feet x 7.5 feet, 560 capacity, Model VLD-160-9, S/N 25133, 90 psig

Vertical Leaf Filter

Asset ID: VLF-113

LEEM

Condition

Location

Stainless Steel Bag Filter with platform, Model # BG1122FHJSS, year built 2003. Uses #2 bags x...

Filters/Bag Filter

3 Items

Asset

Description

Condition

Location

Bag Filter ss with platform

Asset ID: 2101

Ess Corp

Stainless Steel Bag Filter with platform, Model # BG1122FHJSS, year built 2003. Uses #2 bags x 30". Certified by ESS Corp. MAWP 800 gpm maximum flow rate /150 psi at 200 Fahrenheit. Serial # 2046, Includes platform and handrail shown in photos - size approx 3 ft x 4 ft.

Condition

Location

### Bag Filter NEW 4-Bag with 4" Connections ### NEW Bag Filter 4" inlet / outlet. Manufactured...

Bag Filters 4" ss

Asset ID: 8817

PRM Filtration

### Bag Filter NEW 4-Bag with 4" Connections ### NEW Bag Filter 4" inlet / outlet. Manufactured by PRM Filtration. Model BFHBFM4SSXV2. Rated 150 psig / 525 gpm. Uses (4) #2 size filter bags (7-1/16" dia x 32" L). Easy open top with toggle bolts and handwheel.. In stock - ships immediately, subject to prior sale. Price includes shipping and delivery to areas of the US from the middle to Eastern US. Delivery to West of that will be slightly more. Qty (4) available ( priced separately )

Condition

Filter bags for polish filter, size #2. There are 6 boxes of 25 bags each. P2S Polyester Felt...

Location

North Carolina

Filter Bags - Qty 155 Size 2

Asset ID: H2036

Filter bags for polish filter, size #2. There are 6 boxes of 25 bags each. P2S Polyester Felt Filter Bag. Bags measure 2 ft 5 in long. Priced for the LOT.

Condition

Location

### MAC Baghouse Dust Collector - very low hours ### MAC Baghouse dust collector. Model 54ST9....

Filters/Baghouse Dust Collector

2 Items

Asset

Description

Condition

Location

Baghouse Dust Collector 62sf

Asset ID: 8121

MAC

### MAC Baghouse Dust Collector - very low hours ### MAC Baghouse dust collector. Model 54ST9. Serial # 161448-006-1. Used only for about a week for a research project - idled outside. - Mounted on structural frame with MAC MD20 airlock and 0.75 HP motor. - Filter includes (9) 16 oz polyester-dacron bags w/ ground wire and galvanized cages providing 62 sq ft surface. Bags change from clean air side. - Air to dust ratio of 4:1 at 250 cfm. - Baghouse dimensions 24" x 24" x 6 ft tall - Interior contact areas coated with epoxy - See drawing in Links Type ST dust collectors utilize bag media. A Mac baghouse type ST is a square baghouse-type dust collector that uses fabric filters to remove dust, particulates, and pollution from the air. (Square Top-Removal) - top removal. The filter media is installed and removed through the clean air plenum of the filter. Has a hinged top door to allow clean air access to the filter media

Condition

Location

Baghouse Filter, used. Kice model CR288-12 built 2006. Has 288 filter bags with cages - bag...

Baghouse Filter Silo 4300 sf

Asset ID: cp101

Kice

Baghouse Filter, used. Kice model CR288-12 built 2006. Has 288 filter bags with cages - bag size 4-3/4" x 144" long. (Approx 4300 sf surface area). Baghouse size 12 ft dia. X 38 ft tall with 60 degree cone, partially insulated. On steel structure 14 ft x 14 ft x 9 ft tall. OAH approx. 45 ft tall. Carbon steel. With 3 ft screw conveyor at outlet. We have blower fan that went on this system - avaiable for extra cost - see asset cp102. NOTE: Baghouse system has been removed - stored at crane yard near Winnebago, MN. The optional Kice 60 HP blower system and ss stack (25,000 scfm) is in separate location (Marissa, IL). Baghouse filter shipping details: 13'-11" x 13'-10" x 44'-10 1/8 OAH, weight empty 30,500 pounds - allow 35,000 pounds. See links for baghouse filter drawing. We also have operating manual and wiring diagram + erection tips from Kice. Price quote for baghouse silo only.

Condition

### Klampress Belt Filter Press ### Dewatering, desludging filter press - Model KP-1. Mfg by...

Location

Winnebago, MN

Filters/Belt Dewatering

2 Items

Asset

Description

Condition

Location

Belt Dewatering Filter Press 1.2 meter

Asset ID: 1234

Ashbrook

### Klampress Belt Filter Press ### Dewatering, desludging filter press - Model KP-1. Mfg by Ashbrook. Part # KP000586, MPS number 20407, serial number 66448-1765. Belt size 59'-11" long x 47.25" wide. - Includes hydraulic unit - Has spare main belt - Idled in 2022 - Still installed - See drawing for all dimensions Belt presses are a common type of mechanical dewatering equipment used to dewater most biosolids generated at municipal wastewater treatment plants and many industrial applications. Belt presses are used to remove water from liquid wastewater residuals and produce a non-liquid material referred to as “cake”. The Belt Filter Press is a broadly applicable product for dewatering municipal biosolids and industrial sludges.

Condition

Location

### Dewatering Belt Press ### Frontier dewatering belt press. Model FTXI-4700. Serial #...

Dewatering Belt Press

Asset ID: 8558

Frontier

### Dewatering Belt Press ### Frontier dewatering belt press. Model FTXI-4700. Serial # 0182. Dewatering belt press delivers reliable solid-liquid separation & effective sludge or slurry dewatering. Ideal for use in wastewater treatment, mining, food processing and the chemical industry. Technical Data: * Belt Width- 47 inches * 3HP motor * Spray water flow- 35 to 45 GPM * Spray water pressure- 100 to 120 psig * Air flow @ 100 psig / 2 scfm * Main air pressure- 100 psig This belt press has been removed and is located in protected warehouse. Price incudes loading on your truck. Any special handling or crating/skidding will be extra.

Condition

### Cartridge Filter Vessel ### Horizontal filter vessel with 19 elements for coalescing or...

Location

New York

Filters/Cartridge Filter

3 Items

Asset

Description

Condition

Location

Cartridge Filter Vessel

Asset ID: 7899

Champion Process

### Cartridge Filter Vessel ### Horizontal filter vessel with 19 elements for coalescing or particle cartridges. Max flow 7,000 gpm gasoline and 5,000 gpm water. ASME MAWP 200 psig at 100F.. Size 36" dia with 12" Inlet. For 6" dia cartridge filters of 40", 60" & 80" long. Particle filter cartridges are normally 6" dia x 80" long. Coalescing cartridges are normally 6" dia x 40" long. On saddles and steel skid. Used but in good condition.

Condition

Location

Cartridge filters, material stainless steel 304. Has . 4" inlet and 4" outlet. Filter specs are ...

Cartridge Filters

Asset ID: FC-1513

Cartridge filters, material stainless steel 304. Has . 4" inlet and 4" outlet. Filter specs are approximately: hold (20) two inch cartridges that are 40" long. Diameter on filter is 16 inches. OAH is 48" ( 44" to the first lip ). Filter is on angle iron legs 4" tall. Quantity (2) - priced for the set

Condition

Location

Wamflo stainless steel cartridge filter for powder. Type FNC2J12PPOY, serial 11-FN-13-0004866....

Dust Cartridge Filter 129sf

Asset ID: AF11

Wam

Wamflo stainless steel cartridge filter for powder. Type FNC2J12PPOY, serial 11-FN-13-0004866. Size 24" dia x 36" tall on ss skid. Has 8 elements x 920mm long. Filter elements are pleated non-woven polyester. Filter surface area is 12 sq m (129 sf). Self-cleaning - uses compressed air countercurrent cleaning system with timer. Manufactured by Wam.

Condition

Location

Vertical single stage filter, 10 micron, carbon steel, 3" pipe in/out top entry. Designed for...

Filters/Coalescer

1 Items

Asset

Description

Condition

Location

Filter

Asset ID: 31-FL-244

TM Industrial

Vertical single stage filter, 10 micron, carbon steel, 3" pipe in/out top entry. Designed for 101,940 #/hr (205 gpm) solvent with 0.2 PPMW solids, 5 PSID. MAWP 450 psi/FV @350F, Nat'l Bd# 6166, s/n 6171. Used as solvent filter - like new. Mfg by TM Industrial in 2009, used 42 days.

Condition

Location

**Membrane Filter Press** 6 bar (90 psi) and 1000 sf surface area. With hydraulic press and...

Filters/Membrane

2 Items

Asset

Description

Condition

Location

Membrane Filter Press 1000sf

Asset ID: 5547

Industrieterrein Belgium

**Membrane Filter Press** 6 bar (90 psi) and 1000 sf surface area. With hydraulic press and polypropylene plates. Supplied by DeSmet, built by Welders. Built 1985. Model OMF-1200, S/N 81630. 1000 square ft. filter area. 3" inlet/outlet. 51" W x 24' L x 90" H. Bed is 15' long. Uses 47" x 47" x 3.5" polypropylene plates. 64 plates included. Built for 6 bar (90 psi). 5.5kW, 440V, 3 Phase 50 Hz. Ram Info: Model CE 200.140.900KT5A. Co. No. 406383. Design No. 114357C. 900mm length. Includes manual for installation, operation, and maintenance. This filter will need new controls - we can furnish if desired. Price includes removal & loading. Available immediately.

Condition

### Reverse Osmosis RO Membrane Filter System ### Material specs are 316 stainless. Tanks are...

Location

Kingston, Jamaica

Reverse Osmosis Membrane Filter

Asset ID: 2028A

### Reverse Osmosis RO Membrane Filter System ### Material specs are 316 stainless. Tanks are 304 stainless. Includes controls and HMI. Designed for flow rate of 50-60 gpm at 150 - 250 psig. Membranes not included. Last used on well water - removed and stored in controlled warehouse, ready for loading **Three stage** - Stage One has (18) 4" vessels, 5 elements per - Stage Two has (18) 4" vessels, 5 elements per - Stage Three has (12) 4" vessels, 5 elements per **Includes 6 pumps. All 6 pumps driven by VFDs** - (3) recirculation pumps (40HP, 40HP, 20HP) - (3) feed pumps (30HP each) **Tanks** - One Feed tank 500 gallons and two smaller tanks (perm & conc) at 120 gallons each. **Controls and HMI incuded**

Condition

**Memtek EFC 3600 tubular microfiltration system by Siemens** - (3) microfiltration skidded...

Location

Kansas City, MO

Filters/Microfiltration

1 Items

Asset

Description

Condition

Location

Microfiltration

Asset ID: 1922

Memtek

**Memtek EFC 3600 tubular microfiltration system by Siemens** - (3) microfiltration skidded modules in this set as shown. - Crossflow tubular membranes pvc - Concentration FRP tank 8 ft dia x 9 ft tall (3300 gallon capacity). - Mix Tank, FRP with top entering agitator - Circulation pump is centrifugal 50 HP 460/3/60 rated at 1060 gpm. - Overall footprint of system is approx 43 feet x 25 feet wide x 12 feet tall. Each skid is 33 ft x 8 ft x 12 ft tall. The basic EFC system is a skid-mounted package consisting of membrane modules, recirculation pump, in-place cleaning loop, backpulse mechanism, instrumentation and controls. The rugged fluorocarbon membranes are non-plugging, abrasion and chlorine resistant. The skid-mounted design is compact and requires minimal floor space. The Memtek® E-Series systems incorporates proprietary crossflow tubular membranes which remove precipitated contaminants and produce a high quality filtrate suitable for discharge or further treatment. Please note the price incudes removal and loading - contractor quote is budgetary until scope clearly defined. Price may vary based on scope. We can also deliver to you.

Condition

### Durco plate & frame filter press 200sf ### - Has 16 Polypropylene plates 32mm + head plate...

Location

Filters/Plate & Frame

5 Items

Asset

Description

Condition

Location

Filter Press 200 sf Plate & Frame

Asset ID: 7384

Durco Ascension

### Durco plate & frame filter press 200sf ### - Has 16 Polypropylene plates 32mm + head plate & tail plate, 8.5 cu ft cake capacity. - Plates are approx 30 in x 30 in = 200 sf surface area (will have to be verified). - Can dewater slurries from 3 to 30% solids - last used in biodiesel service. - Hydraulic cylinder closing ram. - Model EP-G800/32-16 EP Sidebar Filter Press, 100 psi. Built in 2009, used 2 years then idled in 2011. New filter cloths were installed right before idling. Press is removed and ready to load.

Condition

Location

### M W Watermark Filter Press ### ** 30 poly plates 630mm x 630mm (2 ft x 2 ft) plus front &...

Filter Press 240 sq ft

Asset ID: 8813

M W Watermark

### M W Watermark Filter Press ### ** 30 poly plates 630mm x 630mm (2 ft x 2 ft) plus front & back plate.** Used cloths Surface area 240 sq ft. Hydraulics air driven, 2" feed pipe and 1.5" discharge piping * Max feed pressure: 100psi, Air supply pressure: 100psi * Hydraulic clamping pressure: 35,000psi, Relief pressure: 4,100psi - Serial # FP01199.

Condition

Location

### JWI J-Press 1500 mm ### Evoqua Water Technologies (now part of Xylem) 1500 mm J-Press. Model...

JWI J-Press Filter Press 3075 sq ft

Asset ID: s

Evoqua Water Technologies

### JWI J-Press 1500 mm ### Evoqua Water Technologies (now part of Xylem) 1500 mm J-Press. Model #1500N32-76-150SYLC. Filter area 3075 sq ft. 76 plates. Cake thickness 32 mm, Capacity 150 cu ft. Low Operating Hours. Less than 60 days in operation. The J-Press filter press is one of the most versatile dewatering devices on the market, being used in a wide variety of industrial and municipal applications. The J-Press filter press can be used to recover both solids and liquids from a waste or process stream. With superior materials of construction, the J-Press filter press is especially useful in the dewatering of aggressive acid and alkali suspensions.

Condition

Location

### Outotec Larox Vertical Pressure Filter ### Vertical pressure filter press. Manufactured by...

Larox Press & Frame Filter Press 1033 sf

Asset ID: 8590

Outotec

### Outotec Larox Vertical Pressure Filter ### Vertical pressure filter press. Manufactured by Outotec (Larox). - 1033 sq ft vertical pressure filter press. Model #PF 96/96 M48-2-60. Rated to 16 bar pressure - Capacity: 23,500 kg/hr Dry Solids Capacity. Chamber volume 5.76 cu m, Chamber height 60 mm - Material: 316 Stainless Steel Wetted Parts. 16 Filter Plates. Plate Size: 1500 x 4010mm. - Main Unit Dimensions 7935 mm x 5470 mm x 5860 mm (L x W x H). Filter Cloth dimensions: 1700 mm x 95.5 mm Filter Cloth (W x L). 110 kw, 1800 rpm, 575 Vac, 3-phase, 60 Hz - Hydraulic Power Pack: Hydraulic unit motor (M1HU). 15 KW, 1800 rpm, 575 Vac, 3-phase, 60 hz Hydraulic Oil Cooler Motor (M3HU). 3 KW, 575 Vac, 3-phase, 60 Hz Hydraulic Oil Heater (R1HU). Physical size 3120 x 1865 x 2035 mm tall (3400 kg) - Controls: Control panel and all plc controls with HMI touch screen. Physical size 800 x 400 x 1900 mm tall.(250 kg) - Air Muffler: 950 mm dia x 2610 mm long (550 kg) Serial #1125. Built in 2014. New-still crated.

Condition

### McLanahan Recessed Plate Filter Press 2362sf Like NEW ### - These 4 presses were installed...

Location

Canada

Plate and Frame Filter Press 2362 sf

Asset ID: F3000

McLanahan

### McLanahan Recessed Plate Filter Press 2362sf Like NEW ### - These 4 presses were installed and tested - never ran in production - Polypropylene plates - plate size 2m x 2m (approx 6.5 ft x 6.5 ft). - Two presses have 151 plates for 1961 sq ft surface area. Press model pe035e34 (Membrane) - Two presses have 180 plates for 2362 sq ft surface area. Press model pe035e42 (Recessed Plates) - Pressure rating at 200 psi - Approx size 843 inches long x 109 inch wide x 169 inch tall, weight each about 140 tons - Discharge opening 89 inch x 613 inch - Each press has integral hydraulic system Overhead beam design. The Overhead Beam style results in faster opening and closing for greater production and better cake release in tailings applications. It also provides larger plate openings for better cleaning and maintenance access. Unlike the traditional plate and frame presses, McLanahan’s Filter Press line features modern recessed plates or membrane plates, both of which create a chamber for dewatering the slurry without trapping the cakes within the frames. This allows the dewatered cakes to discharge more easily than with traditional plate and frame presses. McLanahan’s membrane filter plates offer higher production rates for compressible slurries or slurries that require a cake wash or cake blow. **Priced for the LOT - Qty (4) presses**

Condition

Location

LFC Lochem Carbon steel filter vessel. 4.5' diameter, 12' OAH. Surface area 38.5 sq m (400 sf). ...

Filters/Pressure Leaf

9 Items

Asset

Description

Condition

Location

Filter Press 400sf Vertical

Asset ID: 5720

LFC Lochem

LFC Lochem Carbon steel filter vessel. 4.5' diameter, 12' OAH. Surface area 38.5 sq m (400 sf). Model MV.DCD H350 138.5/15/SB. Includes 16" bottom butterfly valve, includes all leaves. Last used for soybean oil bleaching. This unit has been removed and will need reconditioning.

Condition

Good

Location

Kingston, Jamaica

Filter Press 86 sf Vertical

Asset ID: 2021

Sharplex

Sharplex vertical filter presses with structural steel frames. Pressure leaf filters. Capacity...

Sharplex vertical filter presses with structural steel frames. Pressure leaf filters. Capacity 8 sq meters (86 sf) 6 bar at 150 C (90 psig at 300F). There are 3 of these filters - and a place in the structure for one more. Includes some leaves but new sets will have to be purchased. There are some instruments, valves, and small polish filters on these skids surrounding these filter presses - they are included. Includes the 16" butterfly valve on 2 of these filters. Quantity (3) filters in (2) structures. Package - All included in quoted price. Loading on your truck is free.

Condition

Location

### New Filtration Skid - Pilot Size ### **Stainless Steel Skid mounted self contained filter...

Filtration Skid - Pilot Size NEW

Asset ID: 7467

Leem

### New Filtration Skid - Pilot Size ### **Stainless Steel Skid mounted self contained filter skid. All wetted parts stainless steel 304** Leem Model 24-MVS-40 Vertical Tank, Vertical Leaf, Pressure Leaf Filter Skidded Unit. MAWP ASME and stamped - rated for 90 psig at 300F & Full Vacuum. - Filter vessel is 24" outside diameter with (6) 5-Ply Riveted filter leaves with PZ-80 outer filter cloth constructed of type 316ss on 3" spacing affixed to a common 304ss manifold pipe for 40 square feet (3.716 m2) of filter area. Constructed of type 304 stainless with top & bottom swing bolt closures, top to have a davit and hydraulic jack cover lift for ready access to the filter leaves and hinged bottom cover with a counterweight to facilitate filter cake removal. - Includes all necessary ball valves, gaskets, and piping - Slurry tank - 160 gallon pre-coat tank, motor & pump unit: 1x2-8 pump, 3500 RPM, 5 HP; Agitator: Neptune model NO. JG-4.0, gear drive mixer - Control panel mounted to skid. - Entire assembly mounted to 304 SS support skid. Depending on the product being filtered, the amount of solids, and temperature of the product, the flow rate can vary through the filter. With a typical veg oil product with little solids (maybe 1-2%) the flow rate can be as high as 3,000 to 4,000 PPH. If used for tallow or other fats and oils that may have larger amounts of solids, the flow rate can drop to 2,000 PPH through the filter. Please allow 14-16 weeks for delivery ARO. Note: We can offer this unit as a **Rental** on a per month basis, first come, first served.

Condition

### Used Filtration Skid - Pilot Size ### **Stainless Steel Skid mounted self contained filter...

Location

New Jersey

Filtration Skid - Pilot Size Used

Asset ID: 8809

Leem

### Used Filtration Skid - Pilot Size ### **Stainless Steel Skid mounted self contained filter skid. All wetted parts stainless steel 304** Leem Model 24-MVS-40 Vertical Tank, Vertical Leaf, Pressure Leaf Filter Skidded Unit. MAWP ASME and stamped - rated for 90 psig at 300F & Full Vacuum. - Filter vessel is 24" outside diameter with (6) 5-Ply Riveted filter leaves with PZ-80 outer filter cloth constructed of type 316ss on 3" spacing affixed to a common 304ss manifold pipe for 40 square feet (3.716 m2) of filter area. Constructed of type 304 stainless with top & bottom swing bolt closures, top to have a davit and hydraulic jack cover lift for ready access to the filter leaves and hinged bottom cover with a counterweight to facilitate filter cake removal. - Includes all necessary ball valves, gaskets, and piping - Slurry tank - 160 gallon pre-coat tank, motor & pump unit: 1x2-8 pump, 3500 RPM, 5 HP; Agitator: Neptune model NO. JG-4.0, gear drive mixer - Control panel mounted to skid. - Entire assembly mounted to 304 SS support skid. - Comes with two sets of screens a) PZ-80 outer filter screening 316ss, and b) 24 x 110 mesh stainless Depending on the product being filtered, the amount of solids, and temperature of the product, the flow rate can vary through the filter. With a typical veg oil product with little solids (maybe 1-2%) the flow rate can be as high as 3,000 to 4,000 PPH. If used for tallow or other fats and oils that may have larger amounts of solids, the flow rate can drop to 2,000 PPH through the filter. This unit was used as a rental unit but has been completely checked by the factory to ensure good working order.

Condition

Reconditioned Industrial Filter Horizontal pressure leaf filter press, Model D, Series 60-4-16,...

Location

New Jersey

Pressure Leaf Filter Horizontal 412 sf

Asset ID: 2025B

Industrial Filter

Reconditioned Industrial Filter Horizontal pressure leaf filter press, Model D, Series 60-4-16, Type 122.902, Filtration area 412 sq ft. Tank dia: 60 inches dia Includes Set of 16 filter elements (leaves) 5-Ply with wire mesh, All stainless steel leaves. Used leaves in great condition. Hydraulic power pack with oil reservoir and 5 HP pump, basic controls to open/close bundle of leaves and door. Pneumatically operated vibrator. Hydraulic cylinders with oil piping. A-frame and beams are included. Unit will be sandblasted, primed, and final painted.{photos of finished unit are representative of what this one will look like after reconditioning}. Delivery approx 4-5 weeks. Quantity available (2). Priced separately, discount offered if both are purchased.

Condition

Location

Horizontal pressure leaf filters - we have 4 available. Industrial filter press (used), Series...

Pressure Leaf Filter Horizontal 516sf

Asset ID: F20820

Industrial Filter

Horizontal pressure leaf filters - we have 4 available. Industrial filter press (used), Series 60-6-20 Horizontal pressure leaf filter. Has 516 sf filtration area. Built for a project in 1994 and never used. Note that these are NOT reconditioned - will need refurbishment. Type 122.902, Serial F-20818. ASME Nat'l Bd# 3627 , rated at 70 psi at 310F. No A-frame or trolleys. No hydraulic power pack. No filter leaves. Approximate size 6 ft wide x 15 ft long x 8 ft tall, Empty weight 6800 pounds. See LINK for drawing is a representative filter - not the exact one. These are single filter units, not head-to-head. Price quoted is As Is loaded on your truck. NOTE: We actually have (4) of these filter shells. {F20818, F20819, F29820, F20821) - priced separately

Condition

Location

Industrial Filter Horizontal pressure leaf filter press, sold Used As Is. Model D, Series...

Pressure Leaf Filter Horizontal 412 sf

Asset ID: 2025C

Industrial Filter

Industrial Filter Horizontal pressure leaf filter press, sold Used As Is. Model D, Series 60-4-16, Type 122.902, Filtration area 412 sq ft. Tank dia: 60 inches dia Includes Set of 16 filter elements (leaves) 5-Ply with wire mesh, All stainless steel leaves. Includes leaves. Hydraulic power pack with oil reservoir and 5 HP pump, basic controls to open/close bundle of leaves and door. We can replace hydraulic cylinders and seal at additional cost. Removed, ready to load for immediate delivery. Quantity available (2). Priced separately although we can give discount if both are purchased.

Condition

Location

Horizontal pressure leaf filter. ONE (1) USED, As Is. Industrial Filter pressure leaf filter,...

Pressure Leaf Filter ss Horizontal 500sf

Asset ID: 1941

Industrial Filter

Horizontal pressure leaf filter. ONE (1) USED, As Is. Industrial Filter pressure leaf filter, horizontal tank, vertical leaves, all stainless steel product contact parts, 60" dia. Horizontal tank, rated for 70 psi @ 180 deg. F, ASME code with vibrator and hydraulic power pack. Unit is designed as dry cake discharge with quick opening cam lock door. Unit has overhead hydraulic ram for retracting door and leaf bundle and manifold. - Series 60-3.5-19 Type 122.332 serial number F15401 - 500 sq ft surface area - Stainless Steel - all contact surfaces - Incudes 19 stainless steel vertical leaves 44" x 44" - Includes hydraulic power pack

Condition

Location

Vertical pressure leaf filter. ONE (1) USED, AS IS INDUSTRIAL PRESSURE LEAF FILTER, MFG. BY...

Pressure Leaf Filter Vertical 385sf

Asset ID: 1942

Velo

Vertical pressure leaf filter. ONE (1) USED, AS IS INDUSTRIAL PRESSURE LEAF FILTER, MFG. BY INDUSTRIAL FILTER, TYPE 122.332, SERIES# 60-3.5-19, APPROX. 500 SQUARE FEET SURFACE AREA, HORIZONTAL TANK, VERTICAL LEAVES, ALL STAINLESS STEEL PRODUCT CONTACT PARTS, 60" DIA. HORIZONTAL TANK, RATED FOR 70 PSI @ 180 DEG. F, ASME CODE WITH VIBRATOR AND HYDRAULIC POWER PACK. INCLUDES (19) 44”x44” STAINLESS STEEL VERTICAL LEAVES. UNIT IS DESIGNED AS DRY CAKE DISCHARGE WITH QUICK OPENING CAM LOCK DOOR. UNIT HAS OVERHEAD HYDRAULIC RAM FOR RETRACTING DOOR AND LEAF BUNDLE AND MANIFOLD, INCLUDES HYDRAULIC POWER PACK.

Condition

Location

Dual element reverse osmosis unit (RO), GrowniX

Filters/Reverse Osmosis

2 Items

Asset

Description

Condition

Location

Reverse Osmosis Unit

Asset ID: V2213

GrowniX

Condition

Location

**Siemens reverse osmosis system (RO)**. Two identical RO systems - each arranged in a 3-stage...

RO Reverse Osmosis System

Asset ID: 1923

Siemens

**Siemens reverse osmosis system (RO)**. Two identical RO systems - each arranged in a 3-stage 5-3-2 array. Designed to treat process tertiary effluent water and supply demineralized water. Flow is 190 gpm at 55 psig. Filter cartridges with 5 micron pore size protect the membranes. The membranes reduce the total dissolved solids (TDS) of the incoming stream of 14,309 mg/l to 138 mg/l in the final product water. The membranes also reduce the TOC content by >80%. Has 4" inlet, 3" outlet permeate pvc flanges. The RO pump is designed for 190 gpm at 410 Ft TDH and is driven by a 75 HP motor 480v 3/60. Each RO has its own controls but the VFD is not included. Built in 2007, decommissioned in 2011. Still installed. Special note: Qty (2) completely separate systems - priced separately. If both systems are bought, we can give a $10,000 discount from the total. Please note the price includes removal and loading - contractor quote is budgetary until scope clearly defined. Price may vary based on scope. We can also deliver to you. Spare set of membranes available.

Condition

Seitz Enzinger Noll filter press. Model EF60/65CB serial no. 963048 rated at 6 bar (90 psi). ...

Location

Filters/Special

1 Items

Asset

Description

Condition

Location

Seitz Filter 3 sq ft

Asset ID: 2060

Seitz

Seitz Enzinger Noll filter press. Model EF60/65CB serial no. 963048 rated at 6 bar (90 psi). Removable filter plate, Surface area 0.29 sq m, 100 liter. Construction ss316 stainless steel. Chamber 24" dia rated at 6 bar (87 psi) jacketed for 6.5 bar (94 psi) with manual screw lift. Built 1989. Note: This filter had a chiller no longer available. Part of an entire CBD extraction system - enter PK6020 to see all components.

Condition

Location

Fluid Engineering Series 105 Simplex Strainer. Cast 316 Stainless Steel. S/N 3100. 150 max...

Filters/Strainer

2 Items

Asset

Description

Condition

Location

Basket Strainer

Asset ID: 6003

Fluid Engineering

Fluid Engineering Series 105 Simplex Strainer. Cast 316 Stainless Steel. S/N 3100. 150 max pressure. Size 3.

Condition

Location

Fluid Engineering Strainer Model 793, S/N 2919, Size 10, Max Pressure 150, Temp 32-150F, SS Mesh...

Motorized Strainer

Asset ID: 7161

Fluid Engineering

Fluid Engineering Strainer Model 793, S/N 2919, Size 10, Max Pressure 150, Temp 32-150F, SS Mesh Screen, 1/16th in or 1575 Micron Equivalent

Condition

Location

Rebuilt Vertical Hopper Feeder Drive for 33 or 55 DUO Expeller - Thrust Unit Housing, cleaned,...

Gear Reducers

7 Items

Asset

Description

Condition

Location

Expeller Vertical Hopper Feeder Drive

Asset ID: 6015

Anderson

Rebuilt Vertical Hopper Feeder Drive for 33 or 55 DUO Expeller - Thrust Unit Housing, cleaned, Sandblasted and Primed. - Thrust bearing. - Front and Back End Bearings. - Crown & Gear set. - Seals and Gaskets.

Condition

Gear box for double shaft paddle mixer. Rebuilt.

Location

Ft. Worth, TX

Gear Box for Paddle Mixer

Asset ID: H117

Condition

Location

Marley Gear Reducer, series 27A. Ration 8.66/1. Serial # 10976, with Marley fan blade clamp...

Gear Reducer, Right Angle

Asset ID: GR103

Marley

Marley Gear Reducer, series 27A. Ration 8.66/1. Serial # 10976, with Marley fan blade clamp fastener. For 12 blades. Originally a right angle gearbox for a cooling tower - can be used for any right angle gear reducing by taking off the top fan blade holder bracket. Has been reconditioned - ready to run.

Condition

Location

Gear Reducer by Western Gear Corporation. Ration 8.42-1. Frame FWD-55, sn# 654. Set up for 6...

Gear Reducer, Right Angle

Asset ID: GR104

Western Gear

Gear Reducer by Western Gear Corporation. Ration 8.42-1. Frame FWD-55, sn# 654. Set up for 6 blades. Originally a right angle gearbox for a cooling tower - can be used for any right angle gear reducing by taking off the top fan blade holder bracket. Has been reconditioned - ready to run.

Condition

Location

Falk Gear reducer Model 2100FC2AC, s/n 06-031686-01. Input rpm 1750, ratio 17.29. output 101...

Gearbox, Falk

Asset ID: B2103

Falk

Falk Gear reducer Model 2100FC2AC, s/n 06-031686-01. Input rpm 1750, ratio 17.29. output 101 rpm. Rated 309 HP. Includes double chain sprocket

Condition

Location

Falk Gearbox, Inline speed reducer. Includes double chain sprocket. Model 1080FZ2A s/n...

Gearbox, Falk

Asset ID: B2113

Falk

Falk Gearbox, Inline speed reducer. Includes double chain sprocket. Model 1080FZ2A s/n 95-0A0584-01. Input 1750 rpm ratio 25.63, Output 68.3 rpm. Rated 40 HP. Shaft size input 2-1/4, output 3-1/2". Chain sprocket D200-18H

Condition

Location

Gearbox, Lufkin

Asset ID: B2093

Lufkin

Lufkin Gear reducer

Condition

Location

Trivolt electric circulation heater CIRH-0024. Rated at 60 KW 480v 3/60. NEMA. Pressure MWP 150 psi

Heat Exchanger

21 Items

Asset

Description

Condition

Location

Circulation Heater

Asset ID: V2238

Trivolt

Condition

Location

Trivolt electric circulation heater CIRH-0024. Rated at 30 KW 480v 3/60. NEMA. Pressure MWP 150...

Circulation Heater

Asset ID: V2239

Trivolt

Trivolt electric circulation heater CIRH-0024. Rated at 30 KW 480v 3/60. NEMA. Pressure MWP 150 psi. Quantty (6) priced separately

Condition

Location

API Basco heat exchanger 6 x 132 AW Hairpin P/N 1470-06-132-000, S/N E140279-201. MAWP Shell...

Heat Exchanger

Asset ID: H-209

API

API Basco heat exchanger 6 x 132 AW Hairpin P/N 1470-06-132-000, S/N E140279-201. MAWP Shell 110 psi @ 820F, Tubes 3350 psi @ 775F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3350 psi. 41.63 inch OAH, 154.56 inch OAL, 28.25 OAW, 129.82 sq ft

Condition

Location

Heat Exchanger by API Basco 10 x 312 AW Hairpin, P/N 1470-10-312-000. S/N E140279-301. Shell...

Heat Exchanger

Asset ID: H-211

API

Heat Exchanger by API Basco 10 x 312 AW Hairpin, P/N 1470-10-312-000. S/N E140279-301. Shell MAWP 110 psi @ 690F, Tubes 3320 psi @ 775F, Shell MDMT -20F@110 psi, Tubes -20F @ 3320 psi. Year 2014. 42 inch OAW, 57.25 OAH, 342 OAL, 1070 sq ft area

Condition

Location

API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-12-300-000, S/N E140279-401. Shell 110 psi...

Heat Exchanger

Asset ID: H-308

API

API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-12-300-000, S/N E140279-401. Shell 110 psi @ 650F MAWP, Tubes 3360 psi @ 590F, Shell - 20F @ 110 psi, Tubes -20F @ 3360 psi. 61.63 inch OAH, 332.38 inch OAL, 45 inch OAW. Year 2014, Empty Weight 14305 lbs

Condition

Location

API Basco heat exchanger 4 x 132 AW Hairpin P/N 1470-04-132-000, S/N E140279-501. MAWP Shell 110...

Heat Exchanger

Asset ID: H-309

API

API Basco heat exchanger 4 x 132 AW Hairpin P/N 1470-04-132-000, S/N E140279-501. MAWP Shell 110 psi @ 820F, Tubes 3350 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3350 psi. 34.38 inch OAH, 152.69 inch OAL, 21 inch OAW

Condition

Location

API Basco heat exchanger 12 x 312 AW Hairpin (stacked) P/N 1470-12-312-000, S/N E140279-601. ...

Heat Exchanger

Asset ID: H-311

API

API Basco heat exchanger 12 x 312 AW Hairpin (stacked) P/N 1470-12-312-000, S/N E140279-601. MAWP Shell 110 psi @ 650F, Tubes 3320 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3320 psi. 98 inch OAH, 343.88 inch OAL, 57.63 inch OAW

Condition

Location

API Basco heat exchanger 10 x 324 AW Hairpin P/N 1470-10-324-000, S/N E140279-701. MAWP Shell...

Heat Exchanger

Asset ID: H-406

API

API Basco heat exchanger 10 x 324 AW Hairpin P/N 1470-10-324-000, S/N E140279-701. MAWP Shell 110 psi @ 650F, Tubes 3360 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3360 psi. 57.25 inch OAH, 356 inch OAL, 42 inch OAW

Condition

Location

API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-04-120-000, S/N E140279-801. Shell MAWP...

Heat Exchanger

Asset ID: H-407

API

API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-04-120-000, S/N E140279-801. Shell MAWP 110 psi @ 820 MAWP, Tubes 3350 psi @ 690F, MDMT Shell - 20F @ 110 psi, Tubes -20F @ 3350 psi. 34.38 inch OAH, 141.69 inch OAL, 21 inch OAW, Year 2014, Empty Weight 1800 lbs

Condition

Location

API Basco heat exchanger 12 x 306 AW hairpin (stacked) P/N 1470-12-306-000, S/N E140279-901. ...

Heat Exchanger

Asset ID: H-409

API

API Basco heat exchanger 12 x 306 AW hairpin (stacked) P/N 1470-12-306-000, S/N E140279-901. Shell MAWP 110 psi @ 650F MAWP, Tubes 3320 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3320 psi. 337.38 inch OAH, 337.38 inch OAL, 57.63 inch OAW, Year 2014, Empty Weight 29185 lbs

Condition

Location

Rubicon Heat exhanger, Shell & Tube, SS304, MAWP Shell 150 psi @ 450F, Tubes 150 psi @ 350F, MDMT...

Heat Exchanger

Asset ID: H-503

Rubicon

Rubicon Heat exhanger, Shell & Tube, SS304, MAWP Shell 150 psi @ 450F, Tubes 150 psi @ 350F, MDMT Shell -20 @ 450F, Tubes -20@350F, S/N 4021-2, 8 5/8 inch O.D. x 71 7/8" L, 71.6 sq ft area, Model VT8A1-72VE

Condition

Location

Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 75 psi @ 250F, Tubes...

Heat Exchanger

Asset ID: H-707

Rubicon

Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 75 psi @ 250F, Tubes 50 psi @ 250F, MDMT Shell - 20 F @ 100F, Tubes -20 @ 50F, S/N 4024-5, VS34CU2-180H

Condition

Location

Rubicon Economizer Model WC10B1-168HE, MAWP Shell 100 psi @ 400F, Tubes 75 psi @ 400F, MDMT Shell...

Heat Exchanger

Asset ID: H-802

Rubicon

Rubicon Economizer Model WC10B1-168HE, MAWP Shell 100 psi @ 400F, Tubes 75 psi @ 400F, MDMT Shell -20F @ 100 psi, Tubes -20 @ 75 psi, S/N 40242

Condition

Location

Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 100 psi @ 250F, Tubes...

Heat Exchanger

Asset ID: H-803

Rubicon

Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 100 psi @ 250F, Tubes 100 psi @ 350F, MDMT Shell - 20 F @ 100psi, Tubes -20 @ 50psi, S/N 4024-3, WC18B1-168HE, 18 inch diameter x 194.875 inch L

Condition

Location

Rubicon Heat exchanger, MAWP Shell 125 psi @ 700F, Tubes 75 psi @ 500F, MDMT -20F @ 125 psi,...

Heat Exchanger

Asset ID: H-804

Rubicon

Rubicon Heat exchanger, MAWP Shell 125 psi @ 700F, Tubes 75 psi @ 500F, MDMT -20F @ 125 psi, Tubes -20F @ 75 psi, S/N 4024-1, Model WC10B1-168HE

Condition

Location

Rubicon Heat exchanger, MAWP shell 100 psi @ 250F, Tubes 100 psi @ 500F, MDMT -20F, Model...

Heat Exchanger

Asset ID: H-810

Rubicon

Rubicon Heat exchanger, MAWP shell 100 psi @ 250F, Tubes 100 psi @ 500F, MDMT -20F, Model WC4B1-168HE, S/N 4024-4, 4 1/2 inch OD x 185 inch OAL

Condition

Location

Heat Exchanger MAWP Shell 125 psi @ 500F, Tubes 125 psi @ 750F, MDMT Shell -20F @ 125 psi, -20F @...

Heat Exchanger

Asset ID: H-1001

Rubicon

Heat Exchanger MAWP Shell 125 psi @ 500F, Tubes 125 psi @ 750F, MDMT Shell -20F @ 125 psi, -20F @ 125 psi, S/N 4031-2

Condition

Location

Mason heat exchanger 1835 sq ft area, MAWP Shell: 130 psi @ 600F, Tubes: 75 psi @ 600F, MDMT...

Heat Exchanger

Asset ID: H-1002

Mason Mfg

Mason heat exchanger 1835 sq ft area, MAWP Shell: 130 psi @ 600F, Tubes: 75 psi @ 600F, MDMT Shell: -20 @ 75 psi, Tubes: -20F @ 75 psi, S/N 17-6809

Condition

Location

Heat Exchanger 7.09" W x 1905" H x 9" L, 10.7 Sq Ft area

Heat Exchanger

Asset ID: H-103

WCR

Condition

Location

Heat Exchanger by WCR, Single pass flow heat exchanger

Heat Exchanger

Asset ID: H-104

WCR

Condition

Location

Heat Exchanger by API Basco 10 x 300 AW Hairpin P/N 1470-10-300-000. S/N E140279-101. Shell MAWP...

Heat Exchanger Hairpin 862 sf

Asset ID: H-208

API

Heat Exchanger by API Basco 10 x 300 AW Hairpin P/N 1470-10-300-000. S/N E140279-101. Shell MAWP 110 psi @ 690F, Tubes 3360 psi @ 775F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3360 psi. 57.25 OAH, 42 inch OAW, 329.88 OAL, 861.84 sq ft area

Condition

Location

Unused Crown Iron Works stripper condenser 1950 sqft (181 sqmt) has (414) 3/4 inch (19.05 mm)...

Heat Exchanger/Condenser

7 Items

Asset

Description

Condition

Location

Condenser 1950sf

Asset ID: 8069

Crown Iron Works

Unused Crown Iron Works stripper condenser 1950 sqft (181 sqmt) has (414) 3/4 inch (19.05 mm) diameter x 24 feet (7315 mm) long t304 stainless steel tubes rated 45 psi (3.1 bar). Has 24 inch (610 mm) diameter x 24 ft (7315 mm) long carbon steel shell rated 15 psi (1.03 bar). Was used as stripper condenser

Condition

Location

Unused Crown Iron Works 374 sq ft (35 sq mt) horizontal condenser. Has (119) 3/4 inch (19.05 mm)...

Condenser 374sf

Asset ID: 8071

Crown Iron Works

Unused Crown Iron Works 374 sq ft (35 sq mt) horizontal condenser. Has (119) 3/4 inch (19.05 mm) diameter x 16 feet (4877 mm) long 304l stainless steel tubes rated -15/75 psi (-1.03/5.17 bar) design pressure at 250 deg F (121 deg C). Has 14 inch (356 mm) diameter x 16 ft (4877 mm) long carbon steel shell rated -15/165 psi (-1.03/11.37 bar) design pressure at 300 deg F (149 deg C). New 2004.

Condition

Location

Crown Iron Works condenser, NEW, Old Stock. Surface area 5088 sq ft (473 sq m) with (1080) 3/4...

Condenser 5088sf

Asset ID: 8067

Crown Iron Works

Crown Iron Works condenser, NEW, Old Stock. Surface area 5088 sq ft (473 sq m) with (1080) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long ss304 stainless steel tubes rated 45 psi (3.1 bar) design pressure. Carbon steel shell 40 inch (1016 mm) diameter x 24 ft (7315 mm) long rated +/-1 psi (-0.06/0.06 bar) design pressure. New 2004. Was used as Desolventizer Toaster condenser.

Condition

Location

Used condenser manufactured by Melter approximately 1148 sq. ft. surface area. Vertical 316L...

Condenser Vertical SS 1148sf

Asset ID: 7893

Melter

Used condenser manufactured by Melter approximately 1148 sq. ft. surface area. Vertical 316L stainless steel shell and tube heat exchanger. Size 28" diameter X 7'-9" face to face length. Carbon steel shell rated 150 PSI @ 302 degrees F, Has (731) 3/4" OD 316L stainless steel tubes rated 116/FV@ 302 degrees F. S/N MDI-763-7, ASME NB# 401. Nozzles: (2) 3" service nozzles. (1) 4" and (1) 10" inlet and outlet on the process side. (4) 2" inlets and outlets for level and (2) 1.5" nozzles for temperature. Last used as a water stripper column condenser. We will hydrotest upon issuance of purchase order. Removed - ready to load.

Condition

Location

Unused Crown Iron Works approximately 5013 sqft (466 sqmt) 1st stage evaporator. T304 stainless...

Evaporative Condenser 5013sf

Asset ID: 8066

Crown Iron Works

Unused Crown Iron Works approximately 5013 sqft (466 sqmt) 1st stage evaporator. T304 stainless steel tubes has (1064) 3/4 inch (19.05 mm) diameter x 24 feet (7315 mm) long 304 stainless steel tubes rated 15 psi/full vac (1.03 bar/full vac) design pressure. Has 58 inch (1473 mm) diameter x 24 feet (7315 mm) long shell rated +/-1 psi (-0.06/0.06 bar) design pressure. New 2004.

Condition

Location

Unused Crown Iron Works 9498 sqft (882 sqmt) 304 ss horizontal evaporator condenser. Has (2016)...

Evaporator Condenser 9498sf

Asset ID: 8068

Crown Iron Works

Unused Crown Iron Works 9498 sqft (882 sqmt) 304 ss horizontal evaporator condenser. Has (2016) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long 304 stainless steel tubes rated 55 psi (3.70 bar) design pressure at 100 deg.f (38 deg.c). Has 56 inch (1422 mm) diameter x 24 ft (7315 mm) long shell rated +/-15 psi (-1.03/1.03 bar) design pressure at 212 deg.f (100 deg.c). 4 pass tube side, 2 pass shell side. New 2004. Vapor inlet 36:. Shell 56" OD x 24 ft.Overall size 6 ft top to bottom x 27ft-2" long, empty weight approx 32,970 pounds

Condition

Location

Flash drum, Manufactured by Precision Pipe & Vessel in 2009 - ran 42 days only - like new. ...

Flash Drum

Asset ID: 31-V-164

PPV Precision Pipe & vessel

Flash drum, Manufactured by Precision Pipe & Vessel in 2009 - ran 42 days only - like new. Physical size 72" dia x 11'-6" . Has demister pad at top of vessel. Has a 5'-6" skirt on bottom and a 4 ft top skirt for OAH of20'-8" tall. Inlet 4", vapor outlet 1-1/2", liquid outlet 4". ASME rated MAWP 200/FV at 250F. Nat'l Bd# 879, s/n CV-0884. Material: carbon steel SA-516-70 with 2" insulation and ss covering. Note: Photos show both the flash drums stacked on top of each other. Part of module fp311. Used as Flash Drum, High Pressure

Condition

Location

72 new plates for Alfa Laval TS20M heat exchanger. 316ss 0.6mm Flow Plate w/ EPDM Flow Gasket

Heat Exchanger/Plate Exchanger

4 Items

Asset

Description

Condition

Location

Heat Exchanger Plate Pack

Asset ID: 2369

Alfa Laval

Condition

New Alfa Laval TS20M plate & frame heat exchanger with 72 plates.

Location

Ohio

Heat Exchanger, Plate

Asset ID: 2368

Alfa Laval

Condition

Used Polaris Plate Heat Exchanger. 304 Stainless Steel. Approximately 4,448.50 Square Feet. (330)...

Location

Ohio

Heat Exchanger, Plate 4448 sf

Asset ID: 6013

Polaris

Used Polaris Plate Heat Exchanger. 304 Stainless Steel. Approximately 4,448.50 Square Feet. (330) Stainless steel plates. Rated 150 psi at 284 degrees F. (4) 12" diameter inlet/outlets. Flow rate 3600 gallons per minute. Maximum # of plates 348. Mounted on a painted carbon steel expandable frame. Serial# 11738. Built 2010.

Condition

Location

APV stainless steel plate heat exchanger. MAWP 200 PSI @ 320 F. MDMT -20 F @ 200 PSI. Surface...

Heat Exchanger, Plate ss 280 sf

Asset ID: E-1513

APV

APV stainless steel plate heat exchanger. MAWP 200 PSI @ 320 F. MDMT -20 F @ 200 PSI. Surface area: 280 sq. ft. with 2" inlets/outlets. Includes 153 ss316 plates at 0.6mm thick. S/N 30326.1. Last used as a product cooler for ethanol. See drawing for more information.

Condition

Location

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can...

Heat Exchanger/Scraped Surface

3 Items

Asset

Description

Condition

Location

Scraped Surface Heat Exchanger

Asset ID: 7145

Votator

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can recondition if needed. S/N 3455353. Direct Driven by 20HP motor, 1755 rpm/230 rpm out. All wetted surfaces are stainless steel 304, barrel is Chromium plated Nickel. Has 4 rows of ss blades (24 total). MAWP shell 250 psig at 375F/-20F, jacket 150 psig at 375F/-20F. Heat exchange surface area 9 cu ft. Gear reducer Reynold ser No. 3455353, size 5. ratio 7.63:1, output 230 rpm. Volume in tube (product) 880 cu in, volume in jacket 1080 cu in. Physical weight of cylinder & tube is 1100 pounds. Total weight with frame & motor is approx 2500 pounds. Price includes removal & loading on your truck Sold As Is Where Is however, this unit can be reconditioned for additional cost. Cleaned, painted, inspected, new seal, new bearings - 3 month guarantee material and workmanship. New blades and barrel re-chrome are extra options

Condition

Location

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel. Used. Model 6SSHE,...

Scraped Surface Heat Exchanger 9sf

Asset ID: 7107

Cherry Burrell Votator

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel. Used. Model 6SSHE, S/N 90294EC, Mfg Number 00-17418, A5136. This unit has a BWS jacket suitable for brine, water, steam. Last use was to cool lecithin edible oil with cooling water. Driven by Blue motor 20HP motor 460 3/60 with 1755 rpm/230 rpm out. All wetted surfaces are stainless steel 304, barrel is Chromium plated Nickel. Has 4 rows of ss blades (24 total). MAWP shell 250 psig at 375F/-20F, jacket 150 psig at 375F/-20F. Heat exchange surface area 9 sq ft. Gear reducer Reynold ser No. 3455353, size 5. ratio 7.63:1, output 230 rpm. Volume in tube (product) 880 cu in, volume in jacket 1080 cu in. Physical weight of cylinder & tube is 1100 pounds. Total weight with frame & motor is approx 2500 pounds. Sold As Is - we can recondition for you for additional. See drawings in LINK. Price includes removal & loading on your truck Sold As Is Where Is however, this unit can be reconditioned for additional cost. Cleaned, painted, inspected, new seal, new bearings - 3 month guarantee material and workmanship. New blades and barrel re-chrome are extra options. - Photos show unit as-installed, and as-removed now in lay down yard ready to load. - We have two of these units - see also asset number 7108

Condition

Votator Scraped Surface Heat Exchanger 6x72 single barrel. Used - Model 1C672L, S/N 35464VA. ...

Location

Ft Worth, TX

Scraped Surface Heat Exchanger 9sf

Asset ID: 7108

Votator

Votator Scraped Surface Heat Exchanger 6x72 single barrel. Used - Model 1C672L, S/N 35464VA. This unit has a BWS jacket suitable for brine, water, steam. Lat use to cool lecithin edible oil with cooling water. All wetted surfaces are stainless steel 304, barrel is Chromium plated Nickel. Has fours rows of ss blades (24 total). MAWP tube 400 psi at 375F/-20F, jacket 150 psig at 375F/-20F. Heat exchange surface area 9 sq ft. Volume in tube (product) 910 cu in, volume in jacket 2,000 cu in. Driven by 20 HP black motor 460 3/60 with 1755 rpm/222 rpm out Physical weight of cylinder & tube is 1150 pounds. Total weight with frame & motor is approx 2500 pounds. See drawings in LINK. Price includes removal & loading on your truck Sold As Is Where Is however, this unit can be reconditioned for additional cost. Cleaned, painted, inspected, new seal, new bearings - 3 month guarantee material and workmanship. New blades and barrel re-chrome are extra options. - Photos show unit as-installed, and as-removed now in lay down yard ready to load. - We have two of these units - see also asset number 7107

Condition

Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, 8...

Location

Ft Worth, TX

Heat Exchanger/Shell & Tube

11 Items

Asset

Description

Condition

Location

Heat Exchanger 5700 sf

Asset ID: 1340

Joseph Oat

Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, 8 Pass U Tube. ASME "N" Stamp NB # 3607. Horizontal. Carbon steel shell rated MAWP 150 psi at 200 degrees F, diameter 55.5" OD. Tubes: (1194) 3/4" Diameter x 11' long; 304L stainless steel tubes rated MAWP 150 psi at 200 degrees F. 304L Stainless steel head and tubesheets. Openings for shell (2) 14", for tubes (2) 10". Mounted on saddles. Serial # 2692B, Built 2012.

Condition

Location

Heat Exchanger, Mfg by Thermotran. Tube & shell material both are carbon steel. MAWP: Shell...

Heat Exchanger, Shell & Tube 1819sf

Asset ID: 8084

Thermotran

Heat Exchanger, Mfg by Thermotran. Tube & shell material both are carbon steel. MAWP: Shell Pressure 150 psig at 150F. Tube Pressure 1040 psig at 355F. Arrangement is 2-pass shell and 2-pass tubes. Has 340 tubes 0.75" dia x13 feet. Heat exchanger overall length 18.75 feet. Shell 2 ft-10" dia x 1/2 inch thick. ASME NB# 139, S/N H-1441. Inlet/outlet 10". Designed for 306,500 #/hr water shell side at 630 gpm. Designed for syngas tubeside 107,813 #/hr. Heat exchanged 9.2 MMBTU/hr. See link for U-1 and heat exchanger drawing.

Condition

Location

Heat exchanger shell & tube TEMA AEU design. U-tube type, Heat transfer area 2151 sq ft, ASME...

Heat Exchanger, Shell & Tube 2151sf

Asset ID: 41-E-112

HED

Heat exchanger shell & tube TEMA AEU design. U-tube type, Heat transfer area 2151 sq ft, ASME MAWP tubes 1650 psig/FV at 385F, shell 150 psig at 250F. Nat'l Bd # 2932, serial# 4017C. Rated for 98 MMBTU/hr, Water 90/110F, Reactor Effluent 300/105F. Material 304L stainless steel tubes/CS shell. There are 325 tubes sized 5/8" OD with 0.065" wall, Physical size 25" dia x 20 ft. Manufactured by Heat Exchanger Design (HED) in 2009. Physical weight 16,620 pounds. Ran 42 days - like new. We have U-1A - see Links. (Part of module fp413)

Condition

Location

Shell & tube heat exchanger, Heat transfer area 5,861 sq ft, Physical size 38" dia X 28 ft...

Heat Exchanger, Shell & Tube 5861 sf

Asset ID: 31-E-188

Heat Exchanger Design Inc.

Shell & tube heat exchanger, Heat transfer area 5,861 sq ft, Physical size 38" dia X 28 ft long. Material shell KCS (killed carbon steel)/ tubes carbon steel SA179. Rated at 450 psig 4.02 MMBTU/hr, HP Solvent 36/102, Lean Solvent 121/46F. TEMA type BFU, 2-pass shell side, 2-pass tube side. Manufactured by Heat Exchanger Design in 2009 - ran only 42 days - like new. ASME MAWP 450/FV at 350F, Nat'l Bd# 2891, s/n 4015. Has (611) 3/4" tubes. We have drawings and U-1A - see Links. Used as Solvent / High Pressure Liquid Exchanger on fp311.

Condition

Location

Shell & tube heat exchanger, Surface area 135 sq ft, physical size 10 in dia x 8.5 ft long....

Heat Exchanger, Shell & Tube 135 sf

Asset ID: 31-E-236

Precision Pipe & Vessel

Shell & tube heat exchanger, Surface area 135 sq ft, physical size 10 in dia x 8.5 ft long. Designed for 1.44 MMBTU/hr, operating pressure 80 psig. Shell side Steam 324psi/307F, tube side HP Solvent 102psi/125F. ASME rated at shell 150 psi at 400F, tube 200 psi at 250F. TEMA Design NEN. Has 81 tubes 3/4" 14 gage tubing, 0.75/0.083, empty weight 1913 #. Manufactured by Precision Pipe & Vessel in 2009 - ran only 42 days - like new. Material: shell is seamless pipe carbon steel SA-106 grade B, tubes are carbon steel 14 gage. We have drawing in Links. Used as High Pressure Liquid Heater on fp311. Still installed - allow 2-3 weeks for removal and loading.

Condition

Location

Shell & Tube heat exchanger, Rated at 800 psi 0.364 MMBTU/hr, Treated Gas 21/100F, Raw Syn Gas...

Heat Exchanger, Shell & Tube 280sf

Asset ID: 31-E-234

Precision Pipe & Vessel

Shell & Tube heat exchanger, Rated at 800 psi 0.364 MMBTU/hr, Treated Gas 21/100F, Raw Syn Gas 110/64F. Shell & tube, TEMA design NEN, 280 sq ft, 0.75/0.065, 3237 #. Physical size 10 in dia x 23 ft 5 1/8 inch long. On channel saddles 2'-6". ASME MAWP 800/Fv at 350F shell, 800/fv at 250F tubes. Manufactured by Precision Pipe & Vessel (PPV) in 2009. Material tubes 304L Stainless/shell CS. Insulated calcium silicate. See drawing in Links. Used for Gas Clean-up Feed/Effluent Exchanger. Part of fp311. Still installed - will be difficult to remove.

Condition

Location

Paul Mueller Company Heat Exchange Tube. Stainless steel shell and tubes ss304. Brand NEW -...

Heat Exchanger, Shell & Tube ss 102sf

Asset ID: 8138

Paul Mueller

Paul Mueller Company Heat Exchange Tube. Stainless steel shell and tubes ss304. Brand NEW - never used, stored in warehouse. Style TEMA BEM. Size 6-5/8" OD x 247" OAL. (6" ID x 240" tube length). Built 2006. ASME Nat'l Bd # 42489, S/N 357149-16. MAWP shell 125 psi @ 600F, tubes 150 psi @ 400F. NEW. 26 Tubes at 0.75" OD x 240" for 102 sf heat exchange surface area. Inlet/Outlet flange connections all are 2". Empty weight: 607 pounds.

Condition

Heat Exchanger 10.75 diameter x 71 7/8 inches, 100 sqft area, Rubicon Model VT10B2-72VE, S/N...

Location

Pennington Gap, VA

Reboiler Heat Exchanger 100 sf

Asset ID: H-105

Rubicon

Heat Exchanger 10.75 diameter x 71 7/8 inches, 100 sqft area, Rubicon Model VT10B2-72VE, S/N 4021-1, Shell MAWP 150 psi @ 450F, MDMT -20F @ 150 psi,Tubes 150 psi @ 350F, -20F @ 150 psi

Condition

Location

Rubicon Heat exchanger, MAWP Shell 150 psi @ 750F, Tubes 75 psi @ 500F, MDMT -20F @ 150 psi,...

Reboiler Heat Exchanger 1635 sf

Asset ID: H-809

Rubicon

Rubicon Heat exchanger, MAWP Shell 150 psi @ 750F, Tubes 75 psi @ 500F, MDMT -20F @ 150 psi, Tubes -20F @ 75 psi, S/N 4026, Model VT22C1-168VE, 22 inch dia x 218.75 inches, 1635 sq ft

Condition

Location

### Rectifier Reboiler Heat Exchanger 7062 sf ### Like new. Reboiler is from an cellulosic...

Reboiler Heat Exchanger 7062 sf

Asset ID: 7879

Heat Transfer Systems,Inc.

### Rectifier Reboiler Heat Exchanger 7062 sf ### Like new. Reboiler is from an cellulosic ethanol distillation pilot plant project. Total production of ethanol was 20,000 gallons, so very little time in operation. **Specifications** - 304L SS tubes and tube sheets, carbon steel shell jacket for steam - ASME NB# 2068. Designed for Shell 75psi/FV @ 320F, Tubes 60psi/FV @ 320F - Exchanger Configuration: BEM. Vertical Orientation but can be mounted on horizontal - Size 57" Diameter, 16'-0: shell length (over all length 23"-8") Removed - ready to load. Price includes rigging and loading.

Condition

Reboiler 30 inch dia. X 221.375 inches H, 1635 sq ft area; design pressure 150 psi @ 500F, Tubes...

Location

Georgia

Reoiler Heat Exchanger 1635 sf

Asset ID: H-706

Rubicon

Reboiler 30 inch dia. X 221.375 inches H, 1635 sq ft area; design pressure 150 psi @ 500F, Tubes 75 psi @ 350 F

Condition

Location

Cup 5 extractor Prospiant Delta Cup 5. Ethanol extraction system. Can handle plant material up to...

Hemp & Botanicals/Oil Extraction

5 Items

Asset

Description

Condition

Location

Cup 5 Extractor Ethanol + Chiller

Asset ID: V2204

Propiant

Cup 5 extractor Prospiant Delta Cup 5. Ethanol extraction system. Can handle plant material up to 3.5 pounds, average run time 2-12 minutes, ethanol recovered per run is 5 gallons. Price currently includes an Across International T40 chiller -40F to ambient, 220v single phase. Check for availability The Delta CUP-5 is a new innovation. Designed for small scale processors, prototype labs, and education research labs. The Delta CUP-5 does not require a C1D2 environment. Combining closed-loop, cold alcohol extraction technology with mechanical centrifugation ensures a high-purity end-product.

Condition

Location

## CUP 15 Extractor ## The CUP15 is a small capacity system that uses alcohol to extract your...

Ethanol Botanicals Extractor CUP15

Asset ID: 7894

Delta Separations

## CUP 15 Extractor ## The CUP15 is a small capacity system that uses alcohol to extract your target compounds from various botanical materials. - Size 37" x 25" x 56", weight 1095 lbs. - Batch size 8-14 lbs. plant material, avg run time 10-20 minutes - Alcohol requirement is 12-15 gallons per run, Working temp range from -40C to +60C - Liquid/vapor tight vessel with EPDM lid seal; 1 gallon jacket volume with 1/2" NPT male jacket ports; - Industrial Hazardous Location (HazLoc) control panel; Touchscreen HMI; Dual emergency stop - On stainless steel cart with rollers The CUP-15 combines closed loop alcohol extraction with centrifugal technology, ensuring consistent and convenient results by a single operator. A touch screen HMI features a menu with various agitation and spin-dry cycles, each of which is programmable to the operator's specifications. With a runtime of only 10-20 minutes and a throughput of approximately 300 lbs. per 8-hour work day, this system will efficiently attain your processing goals. **Applications** - Botanical Oil Extraction: Hemp, cannabis, essential oils, plant extracts - Pharmaceutical & Nutraceutical Processing - Food & Beverage Industry: Flavor and fragrance extraction - Cosmetic & Skincare Industry: Active ingredient extraction - Chemical Solvent-Based Extraction Processes **Compatible Products & Uses** - Ethanol-Based Cannabis and Hemp Extraction - CBD and THC Oil Production - Essential Oil and Botanical Extract Processing - Industrial-Grade Ethanol Extraction for Herbal and Plant-Based Ingredients - Solvent Recovery and Purification for High-Purity Extracts

Condition

Iluminated Extractors propane extractor for hemp CBD and essential oils. Can use 100% propane,...

Location

Nevada

Propane Extractor

Asset ID: V2203

Illuminated Extractors

Iluminated Extractors propane extractor for hemp CBD and essential oils. Can use 100% propane, 100% butane, or a propane-butane blend. Rated at -40F to +125F, 350 psi Mx WP. Tyical 16.9 psig to 109 psig. Serial 106-2017-03001. Corken botanical oil extraction compressor, reciprocating compressor/Vapor Recovery Pump. Capable of running both wet or dry material, it is the only extraction system on the market designed to be operated using High-Pressure Hydrocarbon Extraction (HPHE)

Condition

Location

### Supercritical 20L Hydraulic CO2 extractor ### Closed loop liquid CO2 extractor. Model...

Supercritical CO2 Extractor 20L

Asset ID: 8564

IES Isolate Extraction Systems

### Supercritical 20L Hydraulic CO2 extractor ### Closed loop liquid CO2 extractor. Model CDMH.20-2X-2F, mfg by Isolate Extraction Systems - Material of Construction 304/316 stainless steel - Manual available on request - Volume 20 liters per extraction (40 total liters) - Capacity 4 - 17.6 lbs per extraction vessel - max flow rate 4 kg/min - Solvent Range: 850-3500 psi (58.6-241.3 bar), 50°-140°F (10°-60°C) - Expansion Range: 400-650 psi (27.5-44.8 bar), 65°-140°F (18°- 60°C) - Includes chiller **Understanding Supercritical CO2 Extraction** The CDMH.20-2X-2F is an industrial-grade CO2 extraction machine designed for professionals seeking a safe, efficient, and high-capacity extraction solution.. Traditional extraction methods often rely on harsh solvents like butane or propane, which can leave residual traces in the final product, raising safety concerns. Supercritical CO2 extraction offers a cleaner and safer alternative. Carbon dioxide (CO2) is a naturally occurring gas, readily available and non-toxic. Under specific conditions of high pressure and temperature, CO2 transforms into a supercritical fluid, possessing properties of both a liquid and a gas. This supercritical CO2 acts as a solvent, effectively dissolving and extracting desired bioactive compounds from botanical materials.

Condition

Location

IES supercritical CO2 extraction system 10L - skid mounted, closed loop liquid CO2...

Supercritical CO2 Extractor 10L

Asset ID: 8565

IES Isolate Extraction Systems

IES supercritical CO2 extraction system 10L - skid mounted, closed loop liquid CO2 Extractor. Model CD10000H-2x-2f - Volume: Dual 10L solvent chambers, 10 liters per extraction vessel [20 total liters] - Capacity: 2 – 8.8 lbs (0.9 – 4 kg) per extraction vessel* - Max Flow Rate: 2.4 kg/min +/-5% ** - Solvent Range: 850-3500 psi (58.6-241.3 bar), 50°-140°F (10°-60°C) - Expansion Range: 400-650 psi (27.5-44.8 bar), 65°-140°F (18°- 60°C) - Materials of Construction 304/316 stainless steel - Manual available on request - Chiller by Thermo Scientific ThermoFlex 5000 operated at 2900w at 19 degrees C, rated at 5000w. Circulating chiller **Understanding Supercritical CO2 Extraction** Traditional extraction methods often rely on harsh solvents like butane or propane, which can leave residual traces in the final product, raising safety concerns. Supercritical CO2 extraction offers a cleaner and safer alternative. Carbon dioxide (CO2) is a naturally occurring gas, readily available and non-toxic. Under specific conditions of high pressure and temperature, CO2 transforms into a supercritical fluid, possessing properties of both a liquid and a gas. This supercritical CO2 acts as a solvent, effectively dissolving and extracting desired bioactive compounds from botanical materials.

Condition

Location

BD control room - see LOT 194

Infrastructure

1 Items

Asset

Description

Condition

Location

Portable Control Room

Asset ID: S194

Condition

### GAS STATION™ From E/One ### **GAS STATION is a new modular approach to gas control and...

Location

Greenwood, MS

Instrument

3 Items

Asset

Description

Condition

Location

Generator Gas Dryer and Analyzer

Asset ID: 8881

e One ( Environmental One Corp )

### GAS STATION™ From E/One ### **GAS STATION is a new modular approach to gas control and monitoring for hydrogen-cooled generators** The E/One Gas Station is a modular approach that combines monitoring and control systems onto a single skid **MODULES** - Generator Gas Analyzer - GGA The Generator Gas Analyzer (GGA) continuously analyzes generator cooling gas during normal and purge operations to ensure optimum purity levels and maximum operational efficiency. ssembly # HD0135G01. Serial # GS 0109. Single phase, 120 VAC, 30 Watts, 50/60Hz. Thermocnductivity measurements designed for gas flow rates fro 100 to 700 cc/min. Triple-range sensor/analyzer that provides continuous monitoring of gas purity during all phases of generator operation. - Generator Gas Dryer - GCD eOne's Generator Gas Dryer (GGD) removes contaminants from the hydrogen cooling gas through all phases of generator operation. Assembly # DD0125G07. Serial # GGD 0112. Single phase, 480 VAC, 2.4 KW, 50/60 Hz. Dual-chamber system continuously dries and recirculates generator cooling gas

Condition

Location

Adtech powered isolated signal converter, model SCT 502 snap track mounting. Input 4-20 maDC,...

Isolated Signal Converter

Asset ID: S2000

Adtech

Adtech powered isolated signal converter, model SCT 502 snap track mounting. Input 4-20 maDC, output 4020 maDC. Power 115 vac. The Adtech Model SCT 502 AC powered Isolated Signal Converter provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, computers, DCS and PLC systems. The SCT 502 breaks the galvanic path between the transmitted signal and the output receiving device insuring reliable and accurate signal transfer. Qty (10) - priced separately

Condition

Location

Hardy load cell weigh module HI PRC03-45C with integral load cell model HI RCH04-50K rated at...

Load Cell Weight Modules

Asset ID: V2266

Hardy

Hardy load cell weigh module HI PRC03-45C with integral load cell model HI RCH04-50K rated at 50,000 pounds each. Includes mounting plates for this weigh module: 16" x 16" leg mounting plate and 14" x 25" base plate. Carbon Steel, zinc plated. Qty (20) - priced separately We can offer a 50% discount if all 20 are bought as a lot.

Condition

Location

### Parshall Flume NEW ### 3 inch Parshall Flume flow measurement device. Can handle flow rates...

Instrument/Flow Flume

1 Items

Asset

Description

Condition

Location

Parshall Flume

Asset ID: 1668

### Parshall Flume NEW ### 3 inch Parshall Flume flow measurement device. Can handle flow rates from 12.5 gpm up to 835 gpm with an accuracy of +/- 2-5%. The Parshall Flume is an economical and accurate way of measuring water flow in open channels and non-full pipes. Fiberglass. Was to be used for waste water treatment flow but never put into service. On pallet - ready to ship

Condition

Location

Micro Motion 1 inch mass flow meter with transmitter. Model DL100S202SU, Serial 239517. DL...

Instrument/Flow Meter, Mass

5 Items

Asset

Description

Condition

Location

Mass Flow Meter 1"

Asset ID: SM01

Micro Motion

Micro Motion 1 inch mass flow meter with transmitter. Model DL100S202SU, Serial 239517. DL sanitary series. Originally calibrated for 53 gpm oil. Sensor attached to flow meter, sn 2395175. Includes transmitter model RFT9739E4SUJ sn 7016482 - for transmitting to plc or touch screen. Suitable for max flow 800 lb/min. (If Oil at 7,9 lb/gal - max flow 100 gpm). This is a used mass flow meter - we will clean recondition and calibrate to your liquid with warranty 24 months. Allow 3 to 4 weeks ARO

Condition

Location

Micro Motion 1/4 inch mass flow meter DS series, stainless steel 316. Meter Model DS025H999SU,...

Mass Flow Meter 1/4 in

Asset ID: S3101

Micro Motion

Micro Motion 1/4 inch mass flow meter DS series, stainless steel 316. Meter Model DS025H999SU, ser 214093. Sensor mounted on meter. Temp range from -240 to 177 C.

Condition

Location

Micro Motion mass flow meter with transmitter. Model CMF200M418PU. Remanufactured. Material: ...

Mass Flow Meter 2"

Asset ID: 1450

Micro Motion

Micro Motion mass flow meter with transmitter. Model CMF200M418PU. Remanufactured. Material: 316L, size 2" x 1 1/2" 105# weld neck RFF. Nominal flow rate 105,000 lb.hr, max flow rate 192,000 lb/hr. Transmitter is remanufactured model RFT9739MVD, 4-20 ma HART protocol. Allow 2 weeks ARO for shipping.

Condition

Remanufactured Rebuilt

Location

Louisiana

Mass Flow Meter 2"

Asset ID: 1959

Micro Motion

Micro Motion Coriolis mass flow meter Model R200S41-4188, Size 2". Serial number 14102359. All...

Micro Motion Coriolis mass flow meter Model R200S41-4188, Size 2". Serial number 14102359. All wetted parts stainless steel 316L Transmitter is 1700 single variable field mount transmitter with back lit dual line display. Last used in margarine service. Sold As Is but we can recondition for you for extra - ask for a quote. Reconditioning will include cleaning, pressure testing, calibrating to your specifications, transmitter testing, and warranty.

Condition

Location

Mass Flow Meter NEW. Size 4" pipe flanged. SWR type DensFlow HD DN4, model 75-5080-11.2B or some...

Mass Flow Meter 4" Piping ss (8)

Asset ID: 1727

SWR

Mass Flow Meter NEW. Size 4" pipe flanged. SWR type DensFlow HD DN4, model 75-5080-11.2B or some are 75-5080-11.2C PN825. Process temp -10 to +120 C. Max pressure 1650 psi (110 bar). Output 24 vDC/0.3A. Made in Germany, distributed in USA. Stainless steel, ceramic lined. DensFlow is a measuring system specially developed for flow metering of solids in dense-stream conveying. DensFlow is used in the online measurement of powders or granules. Contactless measuring - no mechanics. Quantity (8) - priced separately

Condition

Location

Transmitter for Micro Motion mass flow meter. Elite Model RFT9739E4SUJ, sn 7016467. 85-250 VAC,...

Instrument/Flow Transmitter

1 Items

Asset

Description

Condition

Location

Transmitter for Mass Flow

Asset ID: S2301

Micro Motion

Transmitter for Micro Motion mass flow meter. Elite Model RFT9739E4SUJ, sn 7016467. 85-250 VAC, 50/60 Hz, ,Explosion proof.

Condition

Location

Foxboro Electronic level transmitter, 827DF-IS1NHSA1, Ref. No. 86N50387-1A2, 250 deg F max,...

Instrument/Level Transmitter

3 Items

Asset

Description

Condition

Location

Level Transmitter

Asset ID: S1210

Foxboro

Foxboro Electronic level transmitter, 827DF-IS1NHSA1, Ref. No. 86N50387-1A2, 250 deg F max, 12.5-65 VDC, MWP 150 PSI, range 0 to 170 inches water (14 ft), 3" flange. Used

Condition

Good

Location

Foxboro Pressure Level Transmitter with local readout for explosive areas. Silicone interface...

Level Transmitter XP

Asset ID: L215

Foxboro

Foxboro Pressure Level Transmitter with local readout for explosive areas. Silicone interface 316L. Supply 12.5-42 vdc, Output 4-20ma. 07184443. ICP10-T22B21F-M1L1

Condition

Location

Vega Puls 65 (PS-65) radar level detector, RECONDITIONED. Quantity (1). Rod style radar...

Level Transmitter, Radar

Asset ID: S105

Vega

Vega Puls 65 (PS-65) radar level detector, RECONDITIONED. Quantity (1). Rod style radar transmitter - all wetted parts are PTFE. Range can be set up to 114 feet and accuracy to +/- 8mm (1/4 inch). Temp range -40 to 266F; 1.5" NPT, ANSI Flanges, 2 wire 4-20mA HART, measuring range 0-99'. Suitable for explosion proof environment Class I, Div II and dust environment Class II, Div 1. Reconditioned and Factory certified to be working to factory specs

Condition

Location

Allen Bradley Panelview 900. Has 9 inch screen. Cat 2711-K9A2. Series F. Display is AC plasma...

Instrument/plc & HMI

1 Items

Asset

Description

Condition

Location

AB PanelView 900

Asset ID: H2007

Allen Bradley

Allen Bradley Panelview 900. Has 9 inch screen. Cat 2711-K9A2. Series F. Display is AC plasma monochrome 640 x 400 pixel resolution, it has 16 function keys with a keypad operator interface. Serial MK1LN91K, Operator Interface features a DH-485 communication port so the device allows connectivity with an SLC controller, a DH-485 network, a MicroLogix controller, or a Wallmount Power Supply. 100-240 vac 50/60 Hz. Display area 8.27 x 5.17 inches.

Condition

Location

Ashcroft General Service pressure gauge Model 45-1010-A-02L-30IMV&300#. 4 1/2 inch dial, 1/4...

Instrument/Pressure Gauge

9 Items

Asset

Description

Condition

Location

Pressure Gauge & Vacuum 0-300 psi

Asset ID: G11

Ashcroft

Ashcroft General Service pressure gauge Model 45-1010-A-02L-30IMV&300#. 4 1/2 inch dial, 1/4 inch NPT Lower connection, 0-300 psi & 0-30 in Hg vac. 2 available, priced separately.

Condition

Location

Ashcroft pressure gauge 2 inch dial. 0-100 psig, brass1/4 inch back connection

Pressure gauge 0-100

Asset ID: G14

Ashcroft

Condition

Location

Ashcroft 45-1279-AS-04B-160# Duragauge Pressure gauge. 4 1/2 inch dial, 1/2 inch NPT, Back...

Pressure gauge 0-160 psi

Asset ID: G300

Ashcroft

Ashcroft 45-1279-AS-04B-160# Duragauge Pressure gauge. 4 1/2 inch dial, 1/2 inch NPT, Back connection, No fill (dry). 0-160 psig

Condition

Location

Ashcroft pressure gauge 0-30 psig. Brass 1/4" male NPT.

Pressure gauge 0-30 psi

Asset ID: G13

Ashcroft

Condition

Location

Ashcroft 45-1379-AS-02B-300# Duragauge Pressure gauge. 4 1/2 inch dial, 1/4 inch NPT, Back...

Pressure Gauge 0-300 psig

Asset ID: G200

Ashcroft

Ashcroft 45-1379-AS-02B-300# Duragauge Pressure gauge. 4 1/2 inch dial, 1/4 inch NPT, Back connection, No fill (dry). 0-300 psig. Qty (2) available, priced separately.

Condition

Location

Ashcroft Receiver Gauge 45-1279-AS-04L-LL-60#. 1/2 inch NPT Lower connection, Plus! Performance,...

Pressure Gauge 0-60 psi

Asset ID: G19

Ashcroft

Ashcroft Receiver Gauge 45-1279-AS-04L-LL-60#. 1/2 inch NPT Lower connection, Plus! Performance, 0-60 psi.

Condition

Location

Anderson pressure gauge - NEW, in box. Range 0-600 psig, glycerin filled, 2 inch NPT connection....

Pressure Gauge 0-600 psig

Asset ID: SJ208

Anderson

Anderson pressure gauge - NEW, in box. Range 0-600 psig, glycerin filled, 2 inch NPT connection. Model EL08201044111A, S/N 0920989.

Condition

Location

Spirax Sarco pressure gauge, 0-160 psi, 1/2 NPT Pressure gauge. New in box. Open box, old...

Pressure Gauge, 0-160 psi

Asset ID: 6057

Spirax Sarco

Spirax Sarco pressure gauge, 0-160 psi, 1/2 NPT Pressure gauge. New in box. Open box, old stock. 30604862/240610. Made in EU

Condition

Location

Lot of 7 used pressure gauges. Ashcroft Duragauge plus! - 4 inch face. 0-160 psi. AISI 316...

Pressure Gauges, Lot of 7

Asset ID: 6085

Ashcroft

Lot of 7 used pressure gauges. Ashcroft Duragauge plus! - 4 inch face. 0-160 psi. AISI 316 tube and sockets. Priced for the LOT

Condition

Location

Foxboro Pressure Transmitter 821GM-DK1NM2, Ref No. 92480188; Used. MWP 150 PSI, supply voltage...

Instrument/Pressure Transmitter

1 Items

Asset

Description

Condition

Location

Pressure Transmitter

Asset ID: S2302

Foxboro

Foxboro Pressure Transmitter 821GM-DK1NM2, Ref No. 92480188; Used. MWP 150 PSI, supply voltage 12.5-42 VDC; 4-20 ma Output Measures pressure and transmits a proportional electrical signal.

Condition

Location

Weed Instrument temperature RTD Model 7E40A1/4150 Temp. probe up to 550F, (used)/ 1/4 probe x 12...

Instrument/Temperature Transmitter

6 Items

Asset

Description

Condition

Location

Temperature Probe RTD

Asset ID: 2452

Weed instrument

Weed Instrument temperature RTD Model 7E40A1/4150 Temp. probe up to 550F, (used)/ 1/4 probe x 12 inch long. With Crouse-Hinds head enclosure (1/2 CUAB 16). We have thermowells for these RTD's - sold separately. See thermowell asset number 1753. Quantity (32) - priced separately.

Condition

Location

Temperature Transmitter - Foxboro micro processor based Temperature transmitter. Model...

Temperature Transmitter

Asset ID: 6081

Foxboro

Temperature Transmitter - Foxboro micro processor based Temperature transmitter. Model RTT15-T1FSQTXF S/N 07390755 Range 0-200F. With Flanged Thermowell A/SA182F316/316L 2 x 150 BLRF B16.5 NACE SF7168. Unused NEW Old stock

Condition

Location

Foxboro Temperature Transmitter RTT15-T1FLOTXF 0-300 degrees with Thermowell ANSI B16.5 2" 150#. ...

Temperature Transmitter

Asset ID: 6109

Foxboro

Foxboro Temperature Transmitter RTT15-T1FLOTXF 0-300 degrees with Thermowell ANSI B16.5 2" 150#. S/N 08264716. Used

Condition

Location

Rosemount Temperature Transmitter for explosive areas. Supply 12-42.4 vdc, Output 4-20ma. ...

Temperature Transmitter XP

Asset ID: L220

Rosemount

Rosemount Temperature Transmitter for explosive areas. Supply 12-42.4 vdc, Output 4-20ma. Rosemount 3144P DIAINAP4 S/N 0506717. 2 wire 0 to 1000F

Condition

Location

Lot of 2 used Foxboro RTT15 Temperature Transmitters. 0-200F Qty available (2) - priced...

Temperature Transmitters (2)

Asset ID: 6123

Foxboro

Lot of 2 used Foxboro RTT15 Temperature Transmitters. 0-200F Qty available (2) - priced separately - Foxboro RTT15-T1FSOTXF S/N 07390754 0-200F with Thermowell SA182 316/316L 2 x 150 BLRF B16.5 NACE SF7168 - Foxboro RTT15-T1FSOTXF S/N 08121943 0-200F with Thermowell SA182 316/316L 2 x 150 BLRF B16.5 NACE MR0175 SF798B

Condition

Location

Thermowell stainless steel 316 for 1/4" RTD probe. 3/4" FNPT and 1" MNPT x 9 inches long. Used....

Thermowell

Asset ID: 1753

Thermowell stainless steel 316 for 1/4" RTD probe. 3/4" FNPT and 1" MNPT x 9 inches long. Used. Fits the RTD we have for sale as asset number 2452. Qty (5) - priced separately

Condition

Location

Koehler KLA-1-TS cloud point analyzer

Lab

19 Items

Asset

Description

Condition

Location

Cloud Point Analyzer

Asset ID: V2221

Koehler

Condition

Location

Yamato high performance constant temperature oven, forced convection, programmable.Operating temp...

Constant Temperature Oven

Asset ID: V2209

Yamato

Yamato high performance constant temperature oven, forced convection, programmable.Operating temp +15C to 210C at +/- 0.5C accuracy. Stainless steel interior. And 4 ss shelves Has two heaters at 1.5kW. Internal capcity 540 L.Power requirement 220v AC single phase. Ser # 60500486. See data sheet

Condition

Location

Mettler Toledo InTap 565 portable dissolved oxygen analyzer. Used. Unit powers up and analyzes....

Dissolved Oxygen Analyzer

Asset ID: S3205

Mettler Toledo

Mettler Toledo InTap 565 portable dissolved oxygen analyzer. Used. Unit powers up and analyzes. Believe it all works fine but have not tested - just needs calibrating by user

Condition

Location

Heidolph 20L evaporating flask

Flask 20L

Asset ID: V2211

Heidolph

Condition

Location

Across digital heating and stirring Mantle. Model DigiM10. Capacity 10,000 ml. Power 110v, 2100...

Heater Stirrer

Asset ID: V2215

Across Int'l

Across digital heating and stirring Mantle. Model DigiM10. Capacity 10,000 ml. Power 110v, 2100 watts. Serial # 202491

Condition

Location

Across Int'l Digital heating and stirring mantle. Model DigiM500. 500 ml capacity. Stirring from...

Heater Stirrer

Asset ID: V2207

Across Int'l

Across Int'l Digital heating and stirring mantle. Model DigiM500. 500 ml capacity. Stirring from 110 rpm to 1500 rpm, heating from ambient to 300C, flask holder capacity 500ML Ai DigiM 500mL plug and play magnetic stirring and heating mantle.

Condition

Location

### Rotofix 46 Benchtop Centrifuge ### Rotofix 46 Benchtop Centrifuge. Manufactured by Hettich....

Lab Centrifuge

Asset ID: 1090

Hettich

### Rotofix 46 Benchtop Centrifuge ### Rotofix 46 Benchtop Centrifuge. Manufactured by Hettich. Model # 4600-01. **Specifications:** - Maximum Capacity 4 x 290ml - Maximum Blood Tubes 4 x 100ml - Maximum Conical Tubes 4 x 165ml - Ambient Temperature, 4000 rpm The Hettich Rotofix 46 Benchtop Centrifuge, for use in the industrial and research laboratory, carries a wide range of accessories for both routine tasks and specialty applications. Based on the popular Rotofix series, the centrifuge is a robust and economical choice for Organic and Inorganic Chemistry, Preparatory and Analytical Chemistry, Electroplating, Petro-chemistry and Dairy. Note: one image is a representative catalog photo.

Condition

Location

Contifuge Stratos pelletizing continuous flow centrifuge

Lab Centrifuge

Asset ID: V2222

Contifuge Stratos

Condition

Location

Galaxy lab oven, convection oven 1600W, 120v single. Half size countetop convection oven.

Lab Oven

Asset ID: V2216

Galaxy

Condition

Location

Across vacuum oven model AT19. serial # 20209007. Temp range ambient to 480F. Power110v 50/60...

Lab Oven

Asset ID: V2212

Across

Across vacuum oven model AT19. serial # 20209007. Temp range ambient to 480F. Power110v 50/60 Hz single phase, 1500w

Condition

Location

Marvel Scientific Refrigerator Model 3RWWR, S/N 20130912109H

Lab Refrigerator

Asset ID: M16

Marvel Scientific

Condition

Location

Moisture Analyzer Radwag Model MA 50.R. Maximum capacity 50g, heating with IR emitter....

Moisture Analyzer

Asset ID: 2063

Radwag

Moisture Analyzer Radwag Model MA 50.R. Maximum capacity 50g, heating with IR emitter. Repeatability +/- 0.05% and can read moisture content down to 0.001%. Power supply 100-240 vac 50/60 Hz. Consumption 450W. Physical size 470x380x336 mm, weight 4.8kg pk6020

Condition

Location

### ISCO Syringe Pump ### Model # 100 DM. Serial # 213643. Includes Series D pump controller-...

Syringe Pump (100 DM)

Asset ID: V2218

Isco

### ISCO Syringe Pump ### Model # 100 DM. Serial # 213643. Includes Series D pump controller- unit ID # 621240031. Serial # 213562. Pump is in good working condition. See attachment for the manual.

Condition

Location

### ISCO Syringe Pump ### Model # 260D. Serial # 196074. Includes Series D pump controller-...

Syringe Pump (260D)

Asset ID: V2425

ISCO

### ISCO Syringe Pump ### Model # 260D. Serial # 196074. Includes Series D pump controller- series # 621240031-94333. Serial # 194626. Pump is in good working condition. See attachment for the manual.

Condition

Location

Tablet or Pill Counter, Automatic. Pharmafill model TCA2-R electric table top pill counter with...

Tablet / Capsule Counter

Asset ID: 8573

Pharmafill

Tablet or Pill Counter, Automatic. Pharmafill model TCA2-R electric table top pill counter with hopper feed and air guide system. Disk 20 inch diameter. This unit electronically counts tablets and capsules of various sizes and shapes at speeds up to 2000 tab/min or 1000 caps/min. Type AD1001-RA. They can be used to count tablets, capsules, caplets, gel caps (hard and soft), and most common solid oral dose type products. They are also used to count cosmetic gel caps and other products with a shape similar to a tablet or capsule

Condition

Location

Automatic Potentiometric Titrator, dual element

Titrator

Asset ID: S3134

Hanna Instruments

Condition

Karl Fisher Aquacounter Titrator Model AQ 300. The Aquacounter AQ-300 is a compact,...

Location

Greenwood, MS

Titrator

Asset ID: S162

AquaCounter

Karl Fisher Aquacounter Titrator Model AQ 300. The Aquacounter AQ-300 is a compact, user-friendly coulometric Karl Fischer titrator from Hiranuma (now Hitachi High-Tech), designed for precise determination of trace water content (µg to mg) in solids, liquids, and gases, featuring automatic operation, built-in calculation modes (including stats), GLP/ISO support, and options for fritless cells for fast results, making it a popular, budget-friendly choice for moisture analysis.Range from 10 micro grams water to 99 micrograme water. Power 100 to 240 VAC, 50/60 Hz. Note that the photo is from the catalog.

Condition

Hach Laboratory Turbidimeter Model TL2300, tungsten lamp turbidimeter. S/N 2018050C0189. See...

Location

Greenwood, MS

Turbidimeter

Asset ID: M15

Hach

Hach Laboratory Turbidimeter Model TL2300, tungsten lamp turbidimeter. S/N 2018050C0189. See brochure in Links.

Condition

Location

Water Bath - Poly ProBath Model RS-PB-100 S/N 062411E4

Water Bath

Asset ID: M21

Revolutionary Science

Condition

Location

The pump modules C-601 and C-605 are the core components of the BUCHI Sepacore® Chromatography...

Lab/Chromatograph & Mass Spec

8 Items

Asset

Description

Condition

Location

Buchi Pump Module

Asset ID: V2202

Buchi

The pump modules C-601 and C-605 are the core components of the BUCHI Sepacore® Chromatography systems. The three-piston pump module with a pulse-free flow rate from 2,5 to 250 ml/min guarantees fast separation at a maximum working pressure of 10 bar (145 psi) or 50 bar (725 psi) for isocratic or gradient mode. These pump modules are the core components of the Sepacore® chromatography systems. Quantity (2) priced separatey

Condition

Location

Chiller for GC

Asset ID: V2224

Thermo Scientific

Chiller for GC

Condition

Location

Perkin Elmer Polyscience chiller unit.for ICP. Model N0772046, ser number 2F1421211

Chiller for ICP-OES

Asset ID: V2223

PolyScience

Condition

Location

Buchi C-850 flash chromatography with flash prep. Includes columns and accessories. Laser class...

Flash Chromatography Buchi

Asset ID: V2201

Buchi

Buchi C-850 flash chromatography with flash prep. Includes columns and accessories. Laser class 1, serial 1100008620. Power 360 watts 100-240 VAC 50/60 Hz. Quantity (2) priced separately The BUCHI® C-850 Pure Chromatography System is extremely compact and can be used outside of the fume hood. Choose from flash systems or combination flash/prep HPLC capable of small to large scale purification of complex mixtures. UV detection is standard or choose to add ELS detection to detect all compounds. Cartridge/ column holders on front of the system, Lowest sample loss for ELSD (30 uL/min). See data sheet

Condition

Location

### Shimadzu gas chromatograph Model GC-2010 Plus, with accessories ### Accessories include: *...

Gas Chromatograph GC-2010

Asset ID: V2220

Shimadzu

### Shimadzu gas chromatograph Model GC-2010 Plus, with accessories ### Accessories include: * Auto Sampler * Auto Injector * Dell Optiplex Computer * Cables * Syringes * New Exhaust Duct * Septa, Injection Port * Manuals We have chiller for this GC also for an additional cost - see asset V2224 Top end capillary GC analysis, redefining sensitivity limits for trace analysis, fast GC applications, and easy, robust operation

Condition

Location

HPLC - High Performance Liquid Chromatograph. Shimadzu Prominence-l LC-2030C Plus with PL-GPC50...

HPLC

Asset ID: V2219

Shimadzu

HPLC - High Performance Liquid Chromatograph. Shimadzu Prominence-l LC-2030C Plus with PL-GPC50 auto sampler, Aquacounter with UPS battery ,Xtreme Tx90-3000.Serial # L21445750309 US. Has some issues. This machine was damaged in shipping and would likely be used as a source of spare parts. See pdf file in Links for more information and photos. Loading is included in price - extra for crating or international shipping.

Condition

Location

### ICP-OES Agilent 5110 Spectrometer ### The 2016 Agilent 5100 ICP-OES is a high-throughput,...

ICP-OES Agilent 5110 Spectrometer

Asset ID: 8820

Agilent

### ICP-OES Agilent 5110 Spectrometer ### The 2016 Agilent 5100 ICP-OES is a high-throughput, vertical torch spectrometer featuring Dichroic Spectral Combiner (DSC) technology, enabling simultaneous synchronous axial and radial view analysis. Designed for rapid, precise elemental analysis, it includes intelligent software to minimize spectral interferences and optimize workflow, suited for environmental, food, and mining labs. Serial # MY16370002. Price includes software and license.

Condition

Location

Perkin Elmer Optima 8000 ICP-OES spectrometer with S10 Autosampler and accessories. Inductively...

ICP-OES Optima 8000 Spectrometer

Asset ID: V2217

Perkin Elmer

Perkin Elmer Optima 8000 ICP-OES spectrometer with S10 Autosampler and accessories. Inductively Coupled Plasma-Optical Emission Spectrometry. Part number N0780010, ser number 078S1402216C. This unit is fully functional and comes with the operating software. **SEE attached file for much more information** - Perkin Elmer Autosampler S10, part number N2020020, ser number 102S13114817 - Dell Optiplex 7010 computer and monitor - See many more detailed photos on the ICP-OES pdf data in LINKS - Includes many power and communication cables - Includes many, ,may accessories - see pdf file **This unit as shown is loaded at no charge onto your tuck - any crating or special protection is extra** **Chiller PolyScience also available for additional cost - see asset number V2223** The Perkin Elmer Optima 8000 is a versatile ICP-OES system used for accurate and precise elemental analysis. It’s ideal for testing a wide range of materials, including water, soil, metals, and food products. This system is particularly useful in industries like environmental analysis, pharmaceutical testing, and materials science. Its high sensitivity, ease of use, and ability to handle complex samples make it a reliable tool for labs that require consistent and high-quality results.

Condition

Location

### Biosafety Cabinet Lab Hood Class II Type B1 by Nuaire ### - HEPA Exhaust Filter 11-1/2 inch...

Lab/Fume Hoods

2 Items

Asset

Description

Condition

Location

Biosafety Lab Hood 4 foot Type B1

Asset ID: 8111

Nuaire

### Biosafety Cabinet Lab Hood Class II Type B1 by Nuaire ### - HEPA Exhaust Filter 11-1/2 inch and supply filter 5-7/8 inch - both are 99.99% efficiency on 0.3 microns - Nominal width 4 foot - Inflow fpm 105 fpm, downflow 70 fpm - Touch link control system - Cabinet stainless steel 304L - Includes stand shown in photos Nuaire sterile hood. Series # 66, serial # 181074071917.Manufactured in 2017 and is 115VAC, 60Hz, 1 phase, and 10amps. The NU-427 preserves the Class II Type B1 cabinet’s traditional role of serving as an intermediate option between recirculating and total exhaust cabinets but with a control system fit for modern applications. By exhausting air from the entire length of the back half of the work zone through slots in the back wall, this design not only allows users to continue the recommended practice of working “clean to dirty” and deep inside the work zone but also leaves the dished work surface intact to retain spills. This exhaust is powered by an external facility blower that is interlocked with the cabinet’s own motor through a redundant system to provide two layers of protection that minimize the risk of blowing air out of the cabinet should the external blower fail: cabinet exhaust is monitored by not only a mechanical pressure switch but also a differential velocity pressure-flow grid. A touch screen displays the readings from both this flow grid and a downflow sensor in the work zone at all times for the cabinet operator. Standard models meet the requirements of the respected NSF/ANSI 49 standard for biosafety cabinets. **Two available ( priced separately )**

Condition

### XPERT Filtered Balance Systems Lab Hood ### XPERT Filtered Balance System With Guardian...

Location

Vermont

Lab Hood, Filtered

Asset ID: 2443

Labconco

### XPERT Filtered Balance Systems Lab Hood ### XPERT Filtered Balance System With Guardian Airflow Monitor. Manufactured by Labconco. Model # 3950301. serial # 080587564. Power for fan and light Single phase, 115v, 14amp. Contains built in blower and exhaust HEPA filter Containment-enhancing features ensure that potent powders frequently found in pharmaceutical, dry chemical, and industrial hygiene applications are kept away from the operator. - 3 ft wide and incudes stand - No outside ducting required - Accommodate large analytical and micro balances - Intrinsically safe, negative-pressure design - Space-saving design–no separate filtered exhauster is required - Fluorescent lighting

Condition

Location

Radwag electronic analytical balance scale. Max 220g, min 10mg. Analytical balance, Basic line,...

Lab/Scales

2 Items

Asset

Description

Condition

Location

Balance Scale

Asset ID: 8571

Radwag

Radwag electronic analytical balance scale. Max 220g, min 10mg. Analytical balance, Basic line, LCD display, 14-key membrane keypad, ALIBI memory, Readability (g): 0.0001, Min. Sample Weight (g): 0.01, Max. Capacity (g): 220 Product Description: The Radwag Analytical Balance from the Basic line is a precision instrument designed for accurate measurements in laboratory settings. Featuring an LCD display and a 14-key membrane keypad, this balance is user-friendly and efficient. The ALIBI memory function allows for data traceability and record-keeping, ensuring compliance with quality standards. With a readability of 0.0001g, this balance can detect even the slightest changes in weight, making it suitable for demanding applications where precision is crucial. The minimum sample weight of 0.01g ensures that even small quantities can be measured accurately. Despite its sensitivity, the balance has a generous maximum capacity of 220g, providing versatility for a variety of experiments and sample sizes.

Condition

Location

Mettler Toledo Precision Balance Model AB104-S/FACT, S/N 1127392477. The Mettler Toledo...

Precision Balance

Asset ID: M12

Mettler Toledo

Mettler Toledo Precision Balance Model AB104-S/FACT, S/N 1127392477. The Mettler Toledo AB104-S/FACT Analytical Balance is ideal for piece counting, percent weighing, dynamic weighing, or free factor use. Weight output can be read as g, kg, mg, carat, etc. Max capacity 110 g, readability 0.1 mg. Has glass draft shield with sliding doors. See brochure in Links.

Condition

Location

### KMT Hydrobrasive Waterjet Cutting Unit - Low Hours - Like NEW ### Specifically designed for...

Machining

1 Items

Asset

Description

Condition

Location

Waterjet Cutting Unit

Asset ID: 2727

KMT

### KMT Hydrobrasive Waterjet Cutting Unit - Low Hours - Like NEW ### Specifically designed for either high pressure pure waterjet cutting and Hydrobrasive waterjet cutting. This sale includes the following: - Streamline VI 40 Intensifier 480v w/ 40 HP pump and starter - IDE Abrasive System Kit 10/30 w Xfer/Feedline V - Nozzles, adapters, tubing kit, HP gauge 100k psi, extended life diamond orifice - Basic spares kit and tool kit The STREAMLINE VI intensifier standard features: - Completely self-contained, minimum-footprint unit with built-in controls and motor starter - Microprocessor control offers intelligent diagnostics - Digital, color touch screen panel with choice of eleven languages - Low voltage (24VDC) internal controls for safety - Standard dual-pressure control to facilitate piercing and kiss cut applications- Standard high-pressure fluid or water leak detection - Variable displacement, pressure-compensated hydraulic pump technology - 60,000 psi design pressure - Exclusive long, slow stroke to minimize cycling fatigue. Electronic reversing - HYPERLIFE seals with superior 4-piece design - Cartridge-type hydraulic seal that can be extracted from the outside to minimize down time - Ceramic plungers. Patented "Quick Plunger Removal" without disassembly of the hydraulic cylinder - Built-in, adjustable inlet water booster pump and filtration system with 10-micron double-length filter - inlet water pressure sensors - High efficiency, heat exchanger in recirculating pump circuit. Conveniently located Dump valve - Enhanced maintenance features includes a separate hour counter, manual piston jog and alarm history - Maximum orifice size .012" Used only for testing. Unit only has 10-20 hours of use. Idle since 2016

Condition

Location

Camcorp Bulk Bag Unloader Model BHU4000-H, 2000 pound bag capacity

Material Handling

11 Items

Asset

Description

Condition

Location

Bulk Bag Unloader

Asset ID: BBU-108

Camcorp

Condition

Location

Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW...

Compressor Oil Gas & Process

Asset ID: B2096

Atlas Copco

Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW 55 gallon drum. Only one barrel remaning.

Condition

Location

Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was...

Compressor Oil Turbo

Asset ID: B2095

Atlas Copco

Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was Mar 26, 2021. New. Qty (8) - priced separately

Condition

Location

Loadout Arm by Emco Wheaton Size 3/4 Model E2313 with Viton Seals

Loadout arm

Asset ID: BD-1509

Emco Wheaton

Condition

Location

### **Nol-Tec Pneumatic Grain Offload & Ingredient Conveying System** Fully integrated...

Nol-Tec Grain Offload System

Asset ID: 7344

### **Nol-Tec Pneumatic Grain Offload & Ingredient Conveying System** Fully integrated pneumatic conveying system designed for the high-capacity transfer and distribution of grain and bulk ingredients. This system utilizes dense-phase technology to move materials efficiently from offload stations to storage or production. #### **Technical Specifications** * **Conveying Technology:** Nol-Tec high-efficiency pneumatic transfer system with integrated pressure vessel components. * **Control Architecture:** Siemens-based PLC control panel with HMI interface for automated cycle management. * **Material Handling:** Engineered for abrasive or fragile bulk ingredients, ensuring minimal product degradation. * **System Components:** Includes heavy-duty blowers, filter receivers, and integrated pulse-jet dust collection. * **Piping & Valving:** Includes diverter valves, air-management manifolds, and heavy-wall conveying line segments. * **Connectivity:** Integrated with **TOSIBOX** for remote monitoring and diagnostics. #### **Asset Highlights** * **Documentation:** Complete technical package including flow diagrams (P&IDs) and electrical schematics. * **Maintenance History:** Utilized premium components and maintained to industrial standards. * **Efficient Re-installation:** Detailed layout drawings available to streamline decommissioning and assembly. Part of complete Pneumatic Offloading, Conveyance and Storage Package. Search for PK-7345

Condition

Location

### Vertical Pellet Cooler ### Manufactured by Continental Agra. Model # 9-375. Feeds cubes up...

Pellet Cooler, Vertical

Asset ID: 7327

Continental Agra

### Vertical Pellet Cooler ### Manufactured by Continental Agra. Model # 9-375. Feeds cubes up tp 7/8" dia/ rates up to 10,000 lb/hr. ** Specifications ** * Main Drive motor- 1HP TEFC, 460 volt * Feed Style- Controlled via z leg conveyor * Inlet Style- Standard hopper. Two cooling chambers * Controls - Controll panel with HMI, Set-Up- Standard w/ 24V level indicator The Vertical cooler achieves evaporative cooling by dropping hot material through a chamber and drawing an ambient air stream through the chamber of hot material. The degree of cooling depends on material, the ambient conditions (including temperature, relative humidity, etc.), the volume of material fed to the machine, and the temperature and size of the material being fed.

Condition

Location

### **PK-7345: Complete Pneumatic Offloading, Conveyance & Storage Package** This...

Pneumatic Offloading and Storage Package

Asset ID: PK-7345

Nol-Tec

### **PK-7345: Complete Pneumatic Offloading, Conveyance & Storage Package** This comprehensive material handling package provides a turn-key solution for the bulk offloading, storage, and automated distribution of grains, minerals, or protein meals. This integrated system manages the process from truck/rail delivery to high-capacity storage silos and production. #### **Package Components** * **Storage Silos:** Multiple high-capacity industrial storage silos with integrated level sensing and discharge hardware.Asset 7884 * **Nol-Tec Pneumatic Offloading:** High-efficiency transfer system utilizing pressure vessel technology for consistent material flow. * **Blower & Air Management:** Heavy-duty blower packages and pulse-jet filter receivers for high-volume air displacement and dust control. Asset 7341 * **Conveyance Infrastructure:** Complete network of heavy-wall conveying pipe, automated diverter valves, and manifolds. * **Control Suite:** Centralized Siemens PLC control architecture with HMI for synchronized operation. * **Remote Access:** Full **TOSIBOX** integration for remote diagnostics and system-wide monitoring. #### **System Advantages** * **Integrated Efficiency:** Fully automated; designed for high-throughput ingredient processing and minimal product degradation. * **Technical Documentation:** Includes P&IDs, electrical schematics, silo foundation drawings, and mechanical manuals. Price incudees removal and laoding of all smaller assets. Silos are on side in laydown yard - price does not include loading of the 2 silos

Condition

Location

Stainless steel 304 skid on heavy duty rollers, 4" square tubing. Approx size 7 ft x 10.5 ft x 1...

SS Skid on Rollers

Asset ID: V2240

Stainless steel 304 skid on heavy duty rollers, 4" square tubing. Approx size 7 ft x 10.5 ft x 1 ft tall. Qty (4) priced separately

Condition

Location

Stainless steel 304 skid on heavy duty rollers, 4" square tubing. Approx size 80 inches x 10.5 ft...

SS Skid on Rollers

Asset ID: V2242

Stainless steel 304 skid on heavy duty rollers, 4" square tubing. Approx size 80 inches x 10.5 ft x 1 ft tall

Condition

Location

55 gallon drums - stainless steel 304. 16 stainless barrels (drums) available. 2 drums are the...

Stainless Steel 55 Gallon Drums

Asset ID: 2051

55 gallon drums - stainless steel 304. 16 stainless barrels (drums) available. 2 drums are the ribbed style and 14 are smooth. The 16 lids (covers) have plugs. Please see photos.- some photos show smooth lids, but those are no longer available. Priced by the drum (minimum order 3 drums). Quantity (16) total. Pk6020

Condition

Location

### Portable Truck Axle Weigh Scales ### Walz weigh pads (2) plus M6-A indicator panel. Axle...

Truck Axle Weigh Scale

Asset ID: 8572

Walz

### Portable Truck Axle Weigh Scales ### Walz weigh pads (2) plus M6-A indicator panel. Axle Scale Features: - 60,000 lb+ axle capacity axle scale - Pad dimensions: 31.5" X 17" - Quality, durable aluminum construction - Water resistant design

Condition

Location

### Biomass Bale Handling System ### - 4 infeed processing lines for bulk bale handling and...

Material Handling/Biomass Handling

3 Items

Asset

Description

Condition

Location

Biomass Bale Handling & Grinder System

Asset ID: 1710

West Salem Machinery

### Biomass Bale Handling System ### - 4 infeed processing lines for bulk bale handling and grinder plus silo and baghouse - Bale size was 3' x 4' x 8' long - processed in modules of 6 (2 bales wide x 3 bales high. - Capacity 465 tons/day x 4 lines - 1,860 TPD. Each line can hold 2 trucks worth of bales prior to the singulator (150 tons total (288 bales). Each line includes automatic singulation, de-stringing, coarse chop of bales, hydraulic power pack, and then grinders. The silo collects "fines" from the operation for disposal. This system fed an ethanol plant, and a biomass boiler/cogeneration system. Ideal for both. Grind size was <1” but screens can be changed to modify grind size. The biomass handling equipment would work perfectly in preparing biomass for a pelleting operation, or for burning in a biomass boiler from the included silo. Or this could be entirely repurposed to your need. Built 2013 - in very good condition. The general layouts and general description of this equipment are attached as links for more detailed information. This system has been removed except for the silo/baghouse system. - See links for drawings and description. - See video of system in links - biomass system starts at 0:57 second mark.

Condition

### Live Bottom Hopper Receiving Pit Feeders ### **New, Old Stock. Never Used** Laidig 14' x...

Location

Kansas

Live Bottom Hopper (3)

Asset ID: 7896

Laidig

### Live Bottom Hopper Receiving Pit Feeders ### **New, Old Stock. Never Used** Laidig 14' x 14' Multi-Screw (Auger) Receiving Pit System. (Three available-priced separately). - (4) augers 24" dia in a common trough (allow for a 14' x 14' square pit opening in the floor above & 9' x 9' from centerline of pit to centerline of outlet, each driven by a 10HP motor 230/460V, 60Hz @ 1750RPM, TEFC with direct drive gearbox - Anti-jam sensors and zero speed switch - Support legs to concrete floor Designed for - Particle size 1/2" minus - Bulk Density: 25 lb/cu ft - Up to 75% moisture content - Ambient operating temperature - The hopper/receiving pit is designed to deliver 133 cubic feet/minute (100 tons/hr @ 25 PCF) No control panels are included. We can supply control panels for additional. Three available- priced separately.

Condition

### Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder ### **These units are NEW...

Location

Kentucky

Plug Screw Feeder

Asset ID: B-1011

Valmet

### Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder ### **These units are NEW old stock, never used** Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48% Design flow rate 530 dry tons per day soft wood chips (500 BDST/D); Max capacity 1000 BDST/D; Turndown rate 50% **Valmet plug screw feeder** - Fed by a pre-compression screw section, and 48" shredder at outlet - 850 HP Siemens motor 1750 rpm 460v 3/60 - Gear Reducer ratio 25:1. Nominal speed 69 rpm, range 35-105 rpm - Skid size approx 25 ft long x 7 ft wide x 4.6 ft tall. Total weight including motor 45,400 lb - Inlet 35.83" x 25.79" **Pre-compression screw** - Materials of construction stainless steel 304L for all contact parts - Sits on top of plug screw at 90 degrees with s 24" diameter- top force feed - Capacity Volume/Revolution inlet/discharge: 45 L / 22.5 L. Capacity / revolution at 110 kg/m3 = 5.46 BDST/D and net max capacity at 110 kg/m3 = 530 BDST/D - 250 HP motor 1750 rpm 460v 3/60 v-belt drive to gear reducer V-belt reduction 1:52 - Gear reducer SEW Eurodrive ratio 18:1. Final rpm nominal speed 65 rpm, range 45-97 rpm - Overall size approx 15.2 ft long x 7 ft wide x 5.8 ft tall, weight 17,300 lb - Outlet: 35.83" x 25.79" **T-Pipe 48" Shredder** - Fed from plug screw feeder 24" biomass inlet - MAWP 350 psig at 800F - 100 HP motor 1750 rpm 460v 3/60 - Gear reducer 8.9:1 for nominal 197 rpm - Shredder size approx 5 ft x 10.6 ft x 9.3 ft tall, weight 23,650 lb - Outlet 24" flange 600# **Condition** - These units are sealed against weather, protected, and in long term storage inside a third party protected warehouse. No known refurbishment required - assets are sold As Is Where Is.

Condition

### Automatic Super Sack Filler with Scale ### Automatic Super Sack Filler manufactured by...

Location

Georgia, USA

Material Handling/Bulk Bag Systems

1 Items

Asset

Description

Condition

Location

Super Sack Bulk Bag Loader

Asset ID: 7334

Choice Bagging Equipment

### Automatic Super Sack Filler with Scale ### Automatic Super Sack Filler manufactured by Choice Bagging Equipment.Model 510 and on load cell scale by Thompson Scale Co., model 5511. for loading FIBC - Electronic controls and plc - Includes upper fill feed hopper - Thompson load cell scale and weigh controller - 2 vibrators - Digital filler controller Choice Bagging Equipment (CBE) Model 510 Bulk Bag Filler is designed to fill bulk bags ranging from 500 to 3000 lbs. Operation is simple with the bag being placed on a scale or roller platform beneath the gravity style product drop fill spout. As the product moves from the hopper, the bag is rapidly filled and weighed simultaneously. Applications for this machine range from granular products to fine, light/heavy density products. For the lighter density products the use of a vibratory table may be required to help stabilize the bag prior to removing. The controller for the CBE Model 510 Bulk Bag Filler is a specialized GSE electronic controller unit.

Condition

Location

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low...

Material Handling/Fork Lifts & Hoists

3 Items

Asset

Description

Condition

Location

Chain Hoist 10 Ton

Asset ID: B2074

Chester

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high

Condition

Location

### Forklift ### Toyota Propane Forklift

Forklift

Asset ID: 7322

Toyota

Condition

Location

### Scissor Lift ### Electric Skyjack scissor lift. Model 4626. 850 pound capacity...

Scissor Lift

Asset ID: 7319

Skyjack

### Scissor Lift ### Electric Skyjack scissor lift. Model 4626. 850 pound capacity (not-extended). Elevated working height 32 feet. See manual in links

Condition

Location

Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28"...

Material Handling/Hoppers & Weigh Scales

5 Items

Asset

Description

Condition

Location

Base with Load Cells

Asset ID: AF3

Sartorius

Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N. See dataweigh.com and brochure in Links.

Condition

Location

### Dump Loader Grain Deck ### The Brandt Grain Deck is a portable grain pit. Drive your truck...

Brandt Dump Loader

Asset ID: 7343

Brandt

### Dump Loader Grain Deck ### The Brandt Grain Deck is a portable grain pit. Drive your truck over the Grain Deck and unload, eliminating the need to position a hopper under the truck.

Condition

Location

### Custom Built Hopper ### 72" Square, 64" High, 104" OAH, with Roller Slide Gate

Hopper

Asset ID: 7337

Condition

Location

Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x...

Hopper 590cf

Asset ID: AF7

Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft. Has bin vibrators on side and VibraRod vibratory level sensor on top. Closed top with approx 18" round inlet to accept drop from conveyor or feed.

Condition

Location

### Multi-head Weigher ### Model RS10 used for high-speed particulates. Proprietary hopper /...

Multi-Head Weigher

Asset ID: 8812

JDA Process Packaging

### Multi-head Weigher ### Model RS10 used for high-speed particulates. Proprietary hopper / feeder design eliminates flow control variables. Weigh mode retained with each program - switch from grams to pounds to ounces, etc. at the touch of a key. Includes all linear plates, feed buckets, weigh buckets and funnel plates. Specifications: * Resolution: 1 /100 oz. (1 /10 gram) * Capacity: 1 lb. (500 gram) standard to 5 lb. (2.5 kg) optional * Hopper size: 1.75 cubic feet (50 liters) standard to 12 cu. feet (340 liters) optional * Electrical: 220 volt, single phase, 1 amp, 60 hertz * Air requirements: 60 psi, less than 1 /10 cfm * Speed: 10 - 18 cycles per lane per minute at 2/10% (.2%) accuracy

Condition

Location

### Two Station Liquid Load Out System ### Liquid Loadout system, TWO station originally...

Material Handling/Load Out Systems

1 Items

Asset

Description

Condition

Location

Loading Station - Top, Dual Ethanol

Asset ID: PK-8219

### Two Station Liquid Load Out System ### Liquid Loadout system, TWO station originally designed for ethanol at 1200 gpm. Has 4 inch load out line with vent, two station loadout with cantilevered platforms & safeties, galvanized stairs, two OPW 4" swivels and loading arms, slide out platform, Ethanol Rail Loadout (2) station. Filter - Krystil Klear Filtration 150 psig @ 300F, (2) Meters, [The flare system is asset FH-8201 valued separately] This is a complete system. Controls not included. Built 2009 but not used. Currently set up on rail but can be used for rail or truck loadout. See link for GA drawing and schematic detailed information

Condition

Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr...

Location

Canton, IL

Material Handling/Mills & Hammermills

4 Items

Asset

Description

Condition

Location

Fine Grind Air Swept Mill

Asset ID: 2037

Stedman

Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010. Driven by 400 HP motor 3/60/460v 1790 rpm. **Comes with 400 HP soft start**

Condition

Location

### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter,...

Pin Mill Impact Mill

Asset ID: M2002

Sturtevant

### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460 V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial number 504. The Simpactor® pin mill is a centrifugal impact mill that reduces low to medium density materials to uniform, fine particle sizes of 50-325mesh.The Simpactor® is used in milling applications where low maintenance and low wear are critical. Typical Simpactor® milling applications include food product processing such as corn fractionation, flours, starch densification, corn slurry, sugar and sweeteners. Semi-abrasive material applications including aluminum sulfate, fertilizer, gypsum, soda ash, deagglomerate powders including tungsten), talc, clay and kaolin

Condition

Location

### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter,...

Pin Mill Impact Mill

Asset ID: M2003

Sturtevant

### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460 V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial number 703. The Simpactor® pin mill is a centrifugal impact mill that reduces low to medium density materials to uniform, fine particle sizes of 50-325mesh.The Simpactor® is used in milling applications where low maintenance and low wear are critical. Typical Simpactor® milling applications include food product processing such as corn fractionation, flours, starch densification, corn slurry, sugar and sweeteners. Semi-abrasive material applications including aluminum sulfate, fertilizer, gypsum, soda ash, deagglomerate powders including tungsten), talc, clay and kaolin

Condition

Location

## Wood Grinder ## Arasmith MFG. Co. - Service No. 34.30.HH.1517.596 14.HT.2ADW/8 HAS2 - Infeed...

Wood Grinder

Asset ID: 7444

Arasmith Mfg

## Wood Grinder ## Arasmith MFG. Co. - Service No. 34.30.HH.1517.596 14.HT.2ADW/8 HAS2 - Infeed opening 30" x 18" - Powered by 100 HP Lincoln AC Motor, TEFC Energy Efficient, RPM 1765, Frame 405T, Volts 230/460, Amps 226/113, 3 Phase, 60 Hz - Safety switches on all guards and doors to shut the machine off and not allow to turn on when guards or inspection doors are opened. - Wood Grinder has been reconditioned and owner says it is in great working condition. Customer will have to make that decision. We are selling As Is Where Is. - This grinder was being used to make mulch.

Condition

Location

Semi trailer - Drop deck trailer for semi truck. Mfg by Utility Trailer Corp in 1983. Length 45...

Material Handling/Rolling Stock

1 Items

Asset

Description

Condition

Location

Flatbed Trailer Drop Deck

Asset ID: AF98

Utility Trailer Corp

Semi trailer - Drop deck trailer for semi truck. Mfg by Utility Trailer Corp in 1983. Length 45 ft x 96" wide. GVWR 90,000 pounds. VIN 1UY FS2448 EA9783 09.

Condition

Location

### Ammonia Sensors ### The SMC 5100-25-IT is a toxic gas detector within the SMC Sentry IT...

Misc

3 Items

Asset

Description

Condition

Location

Ammonia Sensors (5)

Asset ID: S4055

Sierra Monitor Corp.

### Ammonia Sensors ### The SMC 5100-25-IT is a toxic gas detector within the SMC Sentry IT platform, designed to monitor for ammonia. It can be used as a standalone 4-20 mA device or as a Modbus RTU node within a larger system. The detector features an integral LED display for easy access to gas concentrations, relay statuses, and diagnostics. It also has a menu-driven system for configuration and a long calibration interval, reducing maintenance costs. Priced separately.

Condition

Location

Rollway Ball Bearing 6208NR. Radial/Deep Groove Ball Bearing-Round Bore, 40 mm ID, 80 mm OD. ...

Ball Bearing

Asset ID: O15

Rollway

Rollway Ball Bearing 6208NR. Radial/Deep Groove Ball Bearing-Round Bore, 40 mm ID, 80 mm OD. New - in box. New, old stock. 3 available, priced separately.

Condition

Location

Rexroth Bosch 0821201106 Throttle screw insert, pneumatic replacement part. (2) available, priced...

Throttle screw insert

Asset ID: O46

Bosch

Rexroth Bosch 0821201106 Throttle screw insert, pneumatic replacement part. (2) available, priced separately

Condition

Location

SPX Lightnin mixer model 14S1, Last used as FD-DE Pre Coat Mixer

Mixers

2 Items

Asset

Description

Condition

Location

Mixer

Asset ID: AG-110

SPX Lightnin

Condition

Location

SPX Lightnin model X5S150 agitator, Last used as Hydrolysis Decanter Mixer

Mixer

Asset ID: AG-213

SPX Lightnin

Condition

Location

Chuck Gurdin double ribbon blender mixer, stainless steel. Insulated. Also comes with load...

Mixers/Blender

1 Items

Asset

Description

Condition

Location

Ribbon Blender, Double 155 cf

Asset ID: 2044

Gurdin

Chuck Gurdin double ribbon blender mixer, stainless steel. Insulated. Also comes with load cells scale. Speed adjustable with VFD. Capacity 155 cu ft. Approx size 55" x 168" long x 90" tall. Drum dimensions 44" wide x 120" long x 53" high. Driven by 25 HP motor 1755 rpm with Dodge gear reducer. Clearance Height from ground to discharge port is 30"-32". Part of an entire CBD extraction system - enter PK6020 to see all components.

Condition

Location

Toner Cartridge - Minolta DI-450/470/550 Katun Performance - 8936-902 Black (Copier)

Office/Ink & Toner

1 Items

Asset

Description

Condition

Location

Toner Cartridge

Asset ID: 1299

Katun

Condition

Location

Eaton Dole Flow regulator Model GX 12.0 gpm

Piping

4 Items

Asset

Description

Condition

Location

Flow Regulator

Asset ID: O21

Eaton Dole

Condition

Location

Speedaire Coupler body 1/4 FNPT 30E653

Quick Connect Female 1/4

Asset ID: 5422

Speedaire

Condition

Location

Speedaire Coupler body 1/4 MNPT 30E655

Quick Connect Male 1/4

Asset ID: 5421

Speedaire

Condition

Location

Sauer Danfoss direct duty safety relief valve, cartridge type. Valve 1G10-03-V-0-E-B-XXX. Viton...

Relief Valve, Hydraulic Cartridge

Asset ID: O13

Sauer Danfoss

Sauer Danfoss direct duty safety relief valve, cartridge type. Valve 1G10-03-V-0-E-B-XXX. Viton seals, external adjustment, 20-80 psi spring pressure. New, old stock. Length approx 5 3/4" Buy It Now - Free Shipping.

Condition

Location

4 inch Stainless Steel Flanged Ball Valve. SVF Class 300

Piping/Ball Valve

17 Items

Asset

Description

Condition

Location

Ball Valve

Asset ID: 8140

SVF

Condition

SVF Fluid Control Inc Flanged Ball Valve B416ATR3P 1 1/2 inch - 150 CF8M

Location

Pennington Gap, VA

Ball Valve 1 1/2 inch

Asset ID: 6063

SVF

Condition

Location

Ball Valve 1 inch 125# CS Flanged Ball Valve 200WOG BD693 with handle. American Valve 4000. Qty...

Ball Valve 1"

Asset ID: 5401

American Valve

Ball Valve 1 inch 125# CS Flanged Ball Valve 200WOG BD693 with handle. American Valve 4000. Qty (4) - priced separately

Condition

Location

Ball Valve - meets NACE. Size 1 inch 2000# CS NPT Ball Valve. Sharpe A108 2000 CWP 1 inch NACE...

Ball Valve 1"

Asset ID: 5403

Sharpe

Ball Valve - meets NACE. Size 1 inch 2000# CS NPT Ball Valve. Sharpe A108 2000 CWP 1 inch NACE MR-01-75 338749. Qty (7) available - priced separately

Condition

Location

Sharpe 1" 3 piece steel ball valve. 1000 CWP. Socket weld type. New. There are 4 of these...

Ball Valve 1"

Asset ID: S1208B

Sharpe

Sharpe 1" 3 piece steel ball valve. 1000 CWP. Socket weld type. New. There are 4 of these available - priced separately.

Condition

Location

SVF Ball Valve, 1 inch stainless steel ball valve. ss316. S/S Center section ONLY with TFM Seat...

Ball Valve 1" ss316

Asset ID: 6055B

SVF

SVF Ball Valve, 1 inch stainless steel ball valve. ss316. S/S Center section ONLY with TFM Seat & TFE Body seals. Standard port R86066AT10. New, old stock. Still in plastic bag. Dated 4/7/11. This is a lugged valve fitting between two flanges - does not include the flanges. Multiple valves available - priced separately

Condition

Location

Flow Tek F15 - 2" Flanged ball valve - 2 piece. Body WCB, ball/stem 316ss. Class 150# valve, ...

Ball Valve 2"

Asset ID: 2451

Flow Tek

Flow Tek F15 - 2" Flanged ball valve - 2 piece. Body WCB, ball/stem 316ss. Class 150# valve, Includes bracket mount for actuator. New, old stock.

Condition

Location

2" Stainless Steel ball valve, Flow-Tek S85 CF8M 1000 WOG; This item is new but has been in...

Ball Valve 2" SS

Asset ID: 5744

Flow-Tek

2" Stainless Steel ball valve, Flow-Tek S85 CF8M 1000 WOG; This item is new but has been in storage for some time

Condition

Location

Flow Tek RF15 316 Ball Valve 3 inch flanged

Ball Valve 3" ss

Asset ID: 2453

Flow Tek

Condition

Location

Sharpe 50M76 3/8" ball valve. 1000 CWP CF8M.

Ball Valve 3/8"

Asset ID: S1305B

Sharpe

Condition

Location

Apollo Ball Valve, 1 inch. 72-105-01. Body, Stem, and ball A108. Seat RPTFE, Pkg MPTFE.

Ball Valve, 1 inch

Asset ID: 6105

Apollo

Condition

Location

SVF Ball Valve, 1 inch carbon steel ball valve. C/S Center section TFM Seat & TFE Body seals. ...

Ball Valve, 1 inch Cenrter

Asset ID: 6055

SVF

SVF Ball Valve, 1 inch carbon steel ball valve. C/S Center section TFM Seat & TFE Body seals. Standard port R84066AT10. New, old stock. Still in plastic bag. Dated 4/7/11. Does not include the end

Condition

Location

SVF Ball Valve, 1" - 150#. Flanged, stainless steel. B416666AG150R2. CWP 275 psi. Temp -40...

Ball Valve, 1 inch ss

Asset ID: 6099

SVF

SVF Ball Valve, 1" - 150#. Flanged, stainless steel. B416666AG150R2. CWP 275 psi. Temp -40 to 350F. Body CF8M, Trim 316SS, Seat, TFM. Used. Made in China. Built in 2006 but barely used - in great shape.

Condition

Location

1/2 inch ball valve by SVF Flow Controls. High performance 3-piece ball valve model R8 4466ATSE....

Ball Valve, 1/2 inch

Asset ID: 6069

SVF Flow Controls

1/2 inch ball valve by SVF Flow Controls. High performance 3-piece ball valve model R8 4466ATSE. Quantty (2) available, priced separately

Condition

Location

Sharpe ball valves. WC8 1000 CWP, 1/2 inch. Used - 4 available, priced separately.

Ball Valve, 1/2 inch

Asset ID: 6076

Sharpe

Condition

Location

SVF Ball Valve, 1/2 inch, NPT female ends R84466ATSE. 1500. Threaded connections FNPT. Used.

Ball Valve, 1/2 inch

Asset ID: 6106

SVF

Condition

Location

Sharpe 3/4 inch ball valve. CF8M, 1000 CWP. New, old stock

Ball Valve, 3/4 inch

Asset ID: 6104

Sharpe

Condition

Location

FNW 3 inch Butterfly Valve CF8M Body and disc, SS316 stem, teflon seat. Lugged valve - 4 bolt...

Piping/Butterfly Valve

2 Items

Asset

Description

Condition

Location

Butterfly Valve 3 inch

Asset ID: 6048

FNW742T

FNW 3 inch Butterfly Valve CF8M Body and disc, SS316 stem, teflon seat. Lugged valve - 4 bolt holes. Figure FNW742T. Working pressure 150 psig at 266 F. Made in Korea - used valve. Qty 2 available, priced separately

Condition

Location

Butterfly valve 40" 300# rated 740 psi 100F. Bray Controls P/N 434000-1100147Q/CD40 sn...

Butterfly Valve 40"

Asset ID: 1726

Bray Controls

Butterfly valve 40" 300# rated 740 psi 100F. Bray Controls P/N 434000-1100147Q/CD40 sn C160241184. Body cast iron WCB, stem & disc CF8M stainless steel, seal RPTFE. Made in China 2016. New in crate. Manufacture to ASME B16.34, passed and certified by CE (Europe)

Condition

Location

Bonney Forge 3/4 inch Check Valve 800# HL 41 Std Port Bolted Bonnet 022077-0086 A105N. 800#...

Piping/Check Valve

7 Items

Asset

Description

Condition

Location

Check Valve 3/4"

Asset ID: O9

Bonney Forge

Bonney Forge 3/4 inch Check Valve 800# HL 41 Std Port Bolted Bonnet 022077-0086 A105N. 800# class. 3/4" FNPT Threads. (3) available - priced separately

Condition

Location

DFT Check Valve, 1 inch. Model WLC 49336. S/N 49336 Class 150. Stainless steel 316 body &...

Check Valve, 1 inch

Asset ID: 6051

DFT

DFT Check Valve, 1 inch. Model WLC 49336. S/N 49336 Class 150. Stainless steel 316 body & trim. Rated MAWP 275 psig @ 100F, 195 psig @ 400F. New, old stock.

Condition

Location

Warren Size 1.5 inch check valve, Y pattern, pressure rating 200 psig. Body CF8M, Stem 316, Disc...

Check Valve, 1.5 inch

Asset ID: 6052

Warren

Warren Size 1.5 inch check valve, Y pattern, pressure rating 200 psig. Body CF8M, Stem 316, Disc CF8M, Fig No. 223. New, old stock.

Condition

Location

Hy-Grade 1 inch Swing Wafer Check Valve, T series. Class150 RF 275 WP-100F. S/N 1T20683. 74715....

Check Valve, Swing Wafer, 1 inch

Asset ID: 6103

Hy-Grade Valve Inc

Hy-Grade 1 inch Swing Wafer Check Valve, T series. Class150 RF 275 WP-100F. S/N 1T20683. 74715. 316-A479. New, old stock

Condition

Location

Used Sharpe Swing check valve, Size 1 inch with 1" threaded FNPT connections. CF8M, 200 W. P.

Swing Check Valve, 1 inch

Asset ID: 6079

Sharpe

Condition

Location

Sharpe 1 inch cast stainless steel swing valve. W.P. 200 psig. Body CF8M, Disc 316.

Swing Check Valve, 1 inch

Asset ID: 6065

Sharpe

Condition

Location

Sharpe 3/4 inch Swing Valve. 200 W.P. Body CF8M, Disc 316, Fig 20276. New, old stock.

Swing Valve, 3/4 inch

Asset ID: 6066

Sharpe

Condition

Location

Fairbanks 16" gate valve. New. Figure No. 0405. 150 WOG

Piping/Gate Valve

2 Items

Asset

Description

Condition

Location

Gate Valve 16"

Asset ID: 6595

Fairbanks

Condition

Location

Vogt 1 inch class 800 carbon steel Gate Valve. API 602/ANSI B16.34. Series SW12111 Spec...

Gate Valve, 1 inch

Asset ID: 6064

Vogt

Vogt 1 inch class 800 carbon steel Gate Valve. API 602/ANSI B16.34. Series SW12111 Spec API602/B16.34 Body A105 UG60. Class 800# valve, rated for 1875 psig at 100F. Seat HF. Quantity (4), priced separately. New, old stock

Condition

Location

Knife Gate Valve 20" Stainless steel body and gate with actuator. Full lug, face-to-face 4.5" ....

Piping/Knife Gate Valves

3 Items

Asset

Description

Condition

Location

Knife Gate Valve 20"

Asset ID: B2077

Orbinox

Knife Gate Valve 20" Stainless steel body and gate with actuator. Full lug, face-to-face 4.5" . Orbinox Pneumatic cylinder actuator Model: PARG4NE3-21, SN: V6245532, Bore 12", Stroke - 21", Press Rating 150 PSI. NEW, Old Stock

Condition

Location

Knife gate valve 30" with pneumatic actuator, Wafer. Rated 150 lb carbon steel body with ss304...

Knife Gate Valve 30"

Asset ID: B2079

ITT Fabri Valve

Knife gate valve 30" with pneumatic actuator, Wafer. Rated 150 lb carbon steel body with ss304 knife. Mfg ITT Fabri Figure 037L304. NEW, Old Stock

Condition

Location

One (1) 30" pneumatic stainless steel knife gate valve, new surplus (unused).

Knife Gate Valve, 30"

Asset ID: 6122

Metropolitan Valve Inc.

Condition

Continuous Biodiesel Plant rated at 10 MGY for sale as a complete Asset Sale. Ready to Run - very...

Location

Minnesota

Plants/Biodiesel

5 Items

Asset

Description

Condition

Location

Biodiesel Plant 10 MGY

Asset ID: PK-2800

Continuous Biodiesel Plant rated at 10 MGY for sale as a complete Asset Sale. Ready to Run - very little CapEx needed. Sale includes 6.7 acres land and buildings approximately 9600 sf under roof. Includes truck scale, loadout system, (10) tanks for 330,000 gallons + process tanks. Equipment and systems are maintained and ready to start, trained plant manager on site. Power and all utilities have remained on and plant has been maintained since being idled. Ready to start immediately. Continuous design with all new or renewed equipment. All stainless steel construction including piping. (except reactors). Brand new Goulds pumps and glycerin distillation system. Automatic operation through Allen Bradley plc and HMI control. No rail on site but there is a spur rail next door fed by Norfolk & Southern. Will require a renovation of existing track. The plant can handle RB and clean oils to 3% ffa. Plant was built in 2007, sold and completely renovated in 2016, operated until 2018 when idled. It has also had limited runs in May-June 2022.

Condition

### Biodiesel plant rated for 15 MGY (million gallons per year) ### - Complete plant including...

Location

Moberly, MO

Biodiesel Plant 15 MGY

Asset ID: 7410

Greenline

### Biodiesel plant rated for 15 MGY (million gallons per year) ### - Complete plant including land, rail siding, rail & truck loading, 13 tanks. - Rail ties to BN on one end and UP on other end - BN does the switching. - Two separate complete biodiesel trains capable of operating independently on different feedstocks - a 5 MGY system and a 10MGY system. - All electrical, lab, utilities, and auxiliaries. - All automatic - Allen Bradley plc controls and HMI - Can be run in place. If moved, removal is extra - Land size is approx. 6.52 acres. Plant is a Greenline design capable of running multi feedstocks. It ran animal fat during its production. The 10MGY train was added new in 2008 - plant was idled in 2010, then ran again in 2018 and 2019. Now idle. Much more information available in our Virtual Data Room (VDR). Please ask for an invitation. This plant can be used as a terminal - has 12 rail spots, 2 truck spots, and 1.4 million gallons of storage

Condition

### Biodiesel Plant - 3 MGY (million gallons per year) ### Manufactured by Greenline, this plant...

Location

Missouri

Biodiesel Plant 3 MGY

Asset ID: PK-1900

Greenline

### Biodiesel Plant - 3 MGY (million gallons per year) ### Manufactured by Greenline, this plant ran cottonseed oil in a continuous flow, water free, transesterification reaction and separation modules. - On skids and includes in-process tanks. - Fully automatic with plc control; all controls are still there and intact except for the HMI. - No tank farm - No air compressor - This plant was just inspected by the manufacturer in Dec 2021 and all pieces are still there except for some water piping. - The manufacturer notes that this plant is in good condition and very little CapEx will be needed to start the equipment back up. Customer will have to make its own determination. - Plant must move. - Approx space is occupies now is 75 ft x 100 ft Started in 2008 - idled in 2010. We can offer two further options at an additional price: 1. Greenline refurbish all equipment and make ready for start-up. 2. Greenline install and start-up equipment at new location. See information in Links; more data in our Virtual Data Room (VDR).

Condition

Location

Greenline 5 MGY plant complete. Very good condition, built in 2007 and just idled in Sept 2021....

Biodiesel Plant 5 MGY

Asset ID: PK-2200

Greenline

Greenline 5 MGY plant complete. Very good condition, built in 2007 and just idled in Sept 2021. In all 15 years of production, this plant did not have more than 3 weeks downtime - designed very well. Production was all animal fat at <4% ffa. It could also run Choice white grease, lard, tallow, brown grease. The front end operation has an Alfa Laval PX centrifuge. Includes an extensive spare parts inventory with spares for every major piece of equipment in the plant. Has an enclosed load out area and a chiller/filter press to meet cold soak requirements for biodiesel, NOTE: This is an orderly negotiated asset sale - all assets must move. Land and buildings are not included. Tanks are not included.

Condition

### Biodiesel Plant nameplate capacity 15 MGY ### Idle biodiesel plant, idled in 2010. Has...

Location

Hayti, MO

Biodiesel Plant Infrastructure 15 MGY

Asset ID: PK-2620

### Biodiesel Plant nameplate capacity 15 MGY ### Idle biodiesel plant, idled in 2010. Has 750,000 gallons of feedstock storage, 750,000 gallons of finished product storage, and a 100,000 gallon methanol tank. Rail spur holds well over 50 cars and probably closer to 95. The plant has 1.5-million-gallons of feedstock and refined product storage and is well-situated to access the abundant animal fats market in the area, which provides a cheap feedstock for biodiesel production. With its direct rail link to the CSX national railroad and proximity to the port of Savannah, the plant has robust access to major biodiesel and fuel markets. The Property is currently developed with multiple structures and infrastructure associated with a former biodiesel production facility, including a biodiesel refinery building, large methanol and glycerin recovery columns, a boiler house, an aboveground storage tank (AST) farm, a former maintenance shop, multiple covered storage areas, a large exterior concrete storage area, a retention pond, overhead piping, a boiler scrubber pond, and a rail spur. The site is comprised of roughly 6.5 acres within an 18.7-acre parcel. Note: This is not a complete plant - some equipment has been removed. Details will be in the Virtual Data Room (VDR)

Condition

Hydro Chem hydrogen generating gas plant, pressure swing adsorption type. Capacity is 25,000...

Location

Southeast

Plants/Hydrogen

8 Items

Asset

Description

Condition

Location

Hydrogen Gas Plant 25,000 scfh

Asset ID: 5350

Hydro Chem

Hydro Chem hydrogen generating gas plant, pressure swing adsorption type. Capacity is 25,000 SCFH. Reformer designed with 8 tubes (6 installed and 2 available) and a ground mounted waste heat boiler. There are 4 psa columns. The waste heat boiler provides approximately 1 ton/hr of steam export at 230 psig. The high pressure gas compressor is a 60HP Gardner Denver. System is still installed. Does not include control panel or plc - does include instruments, valves, pipes. Built 1977 - Plant idled in 2015.

Condition

### Hydrogen SMR Plant 50,000 scfh ### Hydrogen gas plant by Hydro-Chem designed to generate at...

Location

Mexico

Hydrogen Gas plant 50,000 scfh

Asset ID: PK-1717

Hydro-Chem

### Hydrogen SMR Plant 50,000 scfh ### Hydrogen gas plant by Hydro-Chem designed to generate at 50,000 scfh (1.2 MMSCFD) at 99.9% purity. Has waste heat boiler, natural gas compressor, 4 psa units, FD fan & ID fan on reformer with space for 12 tubes - 8 reformer tubes were installed with 4 spare tubes to operate at 30,000 scfh to match plant operations capacities. The plant capacity is 50,000 scfh with all tubes installed. Built 1981, relocated and rebuilt in 2005 adding a waste heat boiler system and expanding the footprint, shut down 2018 and mothballed under nitrogen until removed in 2021. There is no catalyst or fill in the reformer tubes, shift converter, desulfurizer, or the PSA's. Missing psa valve skid. Plant footprint is 70 ft x 40 ft. We have P&ID, PFD, GA, and equipment drawings. Much more in our Virtual Data Room - ask for an invitation. Photos show plant as it was installed - it has been removed and stored at a warehouse - ready to load

Condition

Location

### Hydrogen SMR Plant 80,000 scfh ### Hydro-Chem hydrogen gas plant. Capacity 1.9 MMSCFD...

Hydrogen Gas Plant 80,000 scfh

Asset ID: PK-6009

Hydro-Chem

### Hydrogen SMR Plant 80,000 scfh ### Hydro-Chem hydrogen gas plant. Capacity 1.9 MMSCFD (80,000 scfh or 2100 Nm3/hr). Built 2004, in operation until 2021. Was idled with nitrogen blanket on gas side until removed in 2021. Has 20 tube reformer (tubes 3.75"), 4 PSA units, waste heat export boiler. Plant is in very good condition. Design is SMR type (steam methane reforming). Complete plant including controls, plc HMI, programming, manuals, all "as built" drawings. There is no catalyst or fill in the reformer tubes, shift converter, desulfurizer, or the PSA's. Plant designed for no natural gas compressor - fed by higher pressure pipeline. See flyer in links for equipment list. More photos and data available in the Virtual Data Room (VDR - ask for invitation). Photos show as it was installed - now removed and stored at a warehouse - ready for loading

Condition

Location

Howe Baker hydrogen gas generating plant. Capacity 83,000 scfh (2 million scfd). PSA system...

Hydrogen Gas Plant 83,000 scfh

Asset ID: 8407

Howe Baker

Howe Baker hydrogen gas generating plant. Capacity 83,000 scfh (2 million scfd). PSA system with 4 psa columns, Includes reformer, waste gas steam generator boiler, vent gas tank, natural gas compressor, gas train, desulfurizer and shift converters, all heat exchangers, pumps, instruments. SPARES: complete set of psa system valves for reconditioning, brand new downcomer and ring, 13 reformer tubes, ID fan, assorted smaller spares. Controls were Bailey DCS and are not furnished however, the complete ladder logic and Modicon plc's and gas plant I/O cabinet will be made available. The plant had 3 main modules that were housed in building 40 ft x 45 ft - the PSA, reformer, waste boiler, vent gas drum outside. Complete plant footprint approx 90 feet x 72 feet. Built 1992 - was well maintained while operating, now idle. Catalyst and mole sieve has been drummed out and go with the sale. See flyer, General Arrangement, and PFD drawings in links for equipment list.

Condition

### Hydrogen Generating Plant (partial) ### - Design capacity is 90,000 scfh at 200 psig with a...

Location

Decatur, IN

Hydrogen Gas Plant 90,000 scfh (Partial)

Asset ID: 6530

HydroChem

### Hydrogen Generating Plant (partial) ### - Design capacity is 90,000 scfh at 200 psig with a purity of 99.99% pure hydrogen - was running on 10 of its 20 tubes for 45,000 scfh capacity. Burner has been changed out to run the 45,000 scfh capacity. - Reformer can be fired on natural gas or propane - same burner. - Waste heat boiler generating 3,000 to 5,000 #/hr export steam at 250 psig. - PSA plant (4 psa vessels replaced in 1998) with Jamesbury valves kept up to date, Quench pot design. - Plant is missing small natural gas compressor, heat exchangers, and pumps. - Has new tubes, new reformer, and new shift converter catalyst. - Five (5) spare tubes available. Engineered by Hydro-Chem built in 1980. . Plant was shut down in mid 2012, and proper shutdown procedures were followed. Reformer tubes are 6.625" OD, 5.25" ID, 30.825" long and made of alloy HP50 (also known as 25/35)

Condition

### PSA System (pressure swing adsorption) ### **New, Never Installed** * Built by Honeywell...

Location

Nebraska

Hydrogen PSA System 1.3 MMSCFD

Asset ID: 7251

Honeywell

### PSA System (pressure swing adsorption) ### **New, Never Installed** * Built by Honeywell UOP in 2023 - New, never installed. * Rated at 1.3 MMSCFD (million standard cubic feet per day). OUTPUT 1,534 Nm3/Hr. INPUT 2.05 MM SCFD * PSA adsorber vessels rated at 235 psig at 34F / 168F. There are 5 PSA Vessels * Plant footprint is 50 ft x 17 ft. * Allen Bradley 1756 PLC control system. * Two years of operation spare parts available. * Unused Adsorbent available. Hydrogen PSA system uses Honeywell UOP Polybed process to generate 99.99% hydrogen from feed gas (2.05 MMSCFD, 209.3psig at 100F, containing 75% of hydrogen) through 5-bed pressure swing absorption vessels.Hydrogen recovery rate from feed gas is 84.5%. **Technical Specs and Drawings on Request**

Condition

Location

## PSA system (pressure swing adsorption) NEW, Never Operated ## - Built by UOP in 1997 - never...

Hydrogen PSA System 7 MM SCFD

Asset ID: PK-5107

## PSA system (pressure swing adsorption) NEW, Never Operated ## - Built by UOP in 1997 - never put in service. - Rated at 12.1 MM SCFD flowrate infeed, 7 MM SCFD product output - Hydrogen purity 99.9% - System pressure 310 psig feed, Adsorber Vessels rated to 345 psig - 4 bed design - Supply is Surge tank V-700 and (4) adsorbers and valve/piping skid - Valves are Valtec - Approx footprint is 20 ft x 37 ft. Weight PSA skid 21,000 lbs, EACH adsorber vessel 19,500 lbs each, Surge tank 62,500 lbs See Links for P&ID and Arrangement. We have manual on request

Condition

## PSA system (pressure swing adsorption) ## - Built by Hydrochem in 1998 - never put in...

Location

Alberta, Canada

Hydrogen PSA System 750K scfd

Asset ID: PK-5103

HydroChem

## PSA system (pressure swing adsorption) ## - Built by Hydrochem in 1998 - never put in service. - Rated at 750,000 scfd (standard cubic feet per day) = 30,000 scfh. - This is an 8-bed design using Valteck valves. - Vessels all are ASME pressure vessels MAWP 270 psig at 150F. - Includes Dresser Rand hydrogen compressor on skid - discharge pressure 400 psig - MAWP 440 psig. See all nameplate details transcribed in photo. Compressor cylinder type VIP, nominal bore 12.5 inch, 1250 rpm, serial number 3VC200 Capable of purifying the gaseous composition of H2, CO2, CO, CH4, Ethane and Propane depending on the Mole% of each as long as there is NO Moisture/Condensate in those feed streams. This system can purify H2 better than 99.9% Adsorbents not included (we can furnish information on what the adsorbents were. This unit is now in warehouse storage ready to load

Condition

### Vincent Fiber Filter Sludge Press 300-1500 gpm ### Sludge Press manufactured by Vincent....

Location

New York

Presses

1 Items

Asset

Description

Condition

Location

Fiber Filter

Asset ID: 2118

Vincent

### Vincent Fiber Filter Sludge Press 300-1500 gpm ### Sludge Press manufactured by Vincent. Model EF-30. Stainless Steel, serial number 17590-8. 30HP with a capacity of 300-1500 gpm. Built in 2019 and is presently installed in operation. Serial 17590-8 (Se fiber filter model FF-30) Featuring fine filtration of high gpm throughputs, the Fiber Filter is a unique machine. It operates continuously with a fabric filter that is vibrated clean by the process flow, requiring only occasional back-flush cycles. Liquid flows with fiber contents ranging from 0.3% to 1.5% are thickened to a range of 4% to 14% solids with the Fiber Filter. The filtrate liquid is remarkably clear. The Fiber Filter can replace equipment ranging from pre-thickening screens to centrifuges. Fiber Filters can be used both to thicken flow ahead of a screw press and to remove fiber from press liquor. Mechanically the Fiber Filter has a rotating paddle impeller that whirls and pulses the incoming fluid against the inside of a cylindrical filter screen. The filter sleeve, held taught in a frame, is made of a woven polymer fabric. The fabric is available in meshes ranging from 25 microns (0.001") to 300 microns (0.012"). Fabric tension is adjusted from outside the machine, improving sanitation and facilitating operation.*

Condition

BAC Cooling Tower, Model S3E-1222-10P rated at 757 TondR. Certified Capacity 3263 USGPM of water...

Location

Washington

Process

9 Items

Asset

Description

Condition

Location

Cooling Tower 757 TonsR

Asset ID: CT-1004

BAC

BAC Cooling Tower, Model S3E-1222-10P rated at 757 TondR. Certified Capacity 3263 USGPM of water from 98.6F to 89.6F at 78F entering air wet bulb, Galvanized Steel. Single cell with 40 HP fan motor. Two sections for shipping. Circulation pump Sulzer centrifugal 75HP and pipe manifold also available as an extra option. See asset P-1005A

Condition

Location

Frigidaire dehumidifier 70 pints per day capacity. Air flow 165-194 cfm, noise level 53.4 dB. ...

Dehumidifier

Asset ID: V2210A

Frigidaire

Frigidaire dehumidifier 70 pints per day capacity. Air flow 165-194 cfm, noise level 53.4 dB. Power 115v, 690 watts

Condition

Location

Killark diesel Blending skid, with 1/2 HP Motor NON 56T17G15520A P

Diesel Blending Skid

Asset ID: BD-1508

Condition

Location

Exhaust hood Dimensions: 76"W x 61"D galvanized

Exhaust Hood

Asset ID: E2364

Condition

Location

Exhaust hood 72"W x 56"D galvanized

Exhaust hood

Asset ID: E2366

Condition

Location

Flash Dryer. Mfg by Mason Mfg. Shell MAWP 14.7 psi @ 572F, MDMT -20 F @ 14.7 psi. S/N 16-6692

Flash Dryer

Asset ID: F-63

Mason Mfg

Condition

Location

Ultra low temperature freezer, So-Low brand. Needs about $500 work on refrigerant system to put...

Low Temp Freezer

Asset ID: V2208

So-Low

Ultra low temperature freezer, So-Low brand. Needs about $500 work on refrigerant system to put in working shape. Capacity 27 cu ft., temp range from -40F to -112F. Two hermetic compessors 115v single phase

Condition

Location

### ABB Ozone Generator System Type OF 209 L - Quantity (3) available ### Stainless steel...

Ozone Generator 333 Lbs/Day

Asset ID: M2006

ABB

### ABB Ozone Generator System Type OF 209 L - Quantity (3) available ### Stainless steel Ozone Generator Vessel (OGV) and Power Supply Unit (PSU). **Performance** - Rated for 333 pounds per day ozone. - 17 psi ozone gas pressure. - 13,320 pounds per day corresponding mass flow. - 84 gallons per minute flow. - 8.5 kWh per pound power consumption. ** Features **: - OGV: Flanged dished ends with ozone-resistant gaskets, stainless steel (earth) electrodes, and metallized glass (high voltage) electrodes. - PSU: Main switch, main breaker, current rectifier controller, DC-choke, current inverter, high voltage transformer, and Programmable Logic Control (PLC) system. PSU can be controlled manually or by remote set point. System in good working condition when removed from service 3 Units Available - Priced Separately

Condition

Location

Vacuum system consisting of a precondenser, U-24 KOP, WT0352 booster, U-12 KOP and NC0630 pump. ...

Vacuum System

Asset ID: P-811

BUSCH

Vacuum system consisting of a precondenser, U-24 KOP, WT0352 booster, U-12 KOP and NC0630 pump. P-811A Booster pump 1242 ACFM, 10 HP, 3515 RPM, 11.6 FLA, P-811B Bio dis vacuum pump 371 ACFM, .000295 Hg, 20 HP, 3600 RPM, 23.2 FLA

Condition

Location

Clean Out of Place (C.O.P.) tanks - .All stainless steel 304. These are all new tanks. The quote...

Process/CIP / COP

1 Items

Asset

Description

Condition

Location

COP Tanks & Systems

Asset ID: 1975

China

Clean Out of Place (C.O.P.) tanks - .All stainless steel 304. These are all new tanks. The quote offered is for ONE tank in this configuration shown but we offer 4 different sizes and configurations. COP tank length 10 ft x width 24 " x depth 22 ". Overall height 40 ". Internal spray manifolds and external spray manifolds. Solution pump: 5 HP 3,500 rpm 230v 3/60. Includes (4) 6" caster wheels. See tank drawing in Document Link. - For 6 foot long COP tank subtract $1,500 from quotation - For 8 foot long COP tank subtract $600 from quotation - For 12 foot long COP tank, add $1,350 to quotation - Note: a pipe draining rack can be provided, we can furnish COP tanks with or without recirculating pump The above outlined Clean Out of Place (C.O.P.) Tanks may be available for shipment, from the manufacturer’s factory (China) in an estimated 60 days from date of receipt of an order. Shipping time from the manufacturer’s factory to a California Port of Disembarkation is currently erratic; however, believed to be 21-25 days. Terms of Payment: Fifty Percent (50%) deposit with your order Fifty Percent (50%) balance when ready for shipment

Condition

Catalyst Converter designed for 3.9 MMBTU/hr. Design specifications are for 14,500 gallons/day...

Location

Long Beach, CA

Process/Reactor

6 Items

Asset

Description

Condition

Location

Catalytic Converter Reactor

Asset ID: 41-R-168

Wagner

Catalyst Converter designed for 3.9 MMBTU/hr. Design specifications are for 14,500 gallons/day crude methanol or 12,500 gal/day mixed alcohols. Mfg by Wagner Plate Works in 2009. Size approx 7 ft dia ID x 19'-11" s/s x 31 ft overall height for approximately 7,600 gallons capacity - tube bed approx 17 ft long. Has 1,028 x 1.9" O.D. tubes Sch 80 stainless steel TP304L, shell cs 516-70 4 inch thick. ASME Nat'l Bd# 55, MAWP shell 2250 psig/FV at 650 F. MAWP tubes 1650 psig at 650F. Converter currently loaded with approx 150 cu ft methanol catalyst - Sud Chemie MegaMax 700. Still installed - price does not include removal. Shipping size will be about 12 ft x 12 ft x 35 ft long. Note: we have the complete reactor module as well with all pieces shown in photos plus instruments - see asset ID FP411.

Condition

Location

### Shockwave Power Reactor ### Shockwave Power ( cavitation ) Reactor. Model BD50.Total input...

Cavitation Reactor

Asset ID: 2446

Hydro Dynamics

### Shockwave Power Reactor ### Shockwave Power ( cavitation ) Reactor. Model BD50.Total input flow rate is 100gpm, driven by 200HP, and an annual capacity of 55MM / gallon ( based on continuous flow and 95% uptime. Idled in 2019 Harnessing the power of cavitation, the Shockwave Power Biodiesel Reactor drives the transesterification reaction to completion in seconds. In true continuous or batch systems, the SPR gives biodiesel producers greater feedstock flexibility and the power to achieve consistently superior quality. The SPR can improve processes to reduce monoglycerides and reduce catalyst utilization.

Condition

Location

### Shockwave Power Reactor ### Shockwave Power ( cavitation ) Reactor. Model BD15. Total input...

Cavitation Reactor

Asset ID: 2447

Hydro Dynamics

### Shockwave Power Reactor ### Shockwave Power ( cavitation ) Reactor. Model BD15. Total input flow rate is 30 gpm, driven by 60 HP motor, and an annual capacity of 15MM / gallon (based on continuous flow and 95% uptime). Idled in 2019 Harnessing the power of cavitation, the Shockwave Power Biodiesel Reactor drives the transesterification reaction to completion in seconds. In true continuous or batch systems, the SPR gives biodiesel producers greater feedstock flexibility and the power to achieve consistently superior quality. The SPR can improve processes to reduce monoglycerides and reduce catalyst utilization.

Condition

Location

## Velocys Fischer-Tropsch Reactors - NEW, Never Used ## Capacity Design Rate at 175 bbl/day. ...

Fischer-Tropsch Reactors

Asset ID: B-1012

Velocys

## Velocys Fischer-Tropsch Reactors - NEW, Never Used ## Capacity Design Rate at 175 bbl/day. New Reactors using Fischer-Tropsch technology. - Velocys has a patented catalyst and microchannel reactor system that enables production of SAF and Renewable Diesel from a vast range of sources. - Microchannel reactor provides a compact modular and scalable solution - Catalysts enable high volumetric productivity, 6-10 times that of traditional FT technology - System can achieve high per-pass and overall CO conversion and maximize throughput at same fresh syngas to reduce c.5% OPEX Quantity (4) reactors - priced separately Also available (6) charges of catalyst for these 4 reactors at an additional cost

Condition

Reactor vessel. Stainless steel reactor. Material assumed to be ss304. Custom reactor for...

Location

Houston,TX

Reactor

Asset ID: AF4

Reactor vessel. Stainless steel reactor. Material assumed to be ss304. Custom reactor for particle production with gas feeds site ports, instrument ports. Dwyer differential pressure transmitter. Stir/agitator motor drive for shaft at top, 10HP at 1770 rpm. Reactor size is 34" dia x 98" tall for capacity of 350 gallons Mounted on carbon steel frame. Frame size is 53" x 59" x 157" tall.

Condition

Location

Hydrogenation reactor stainless steel 304. NEW reactor - Volume 20 cu M for a 12.5 MT batch...

Reactor Hydrogenation

Asset ID: 1751

DVC Process Technologies

Hydrogenation reactor stainless steel 304. NEW reactor - Volume 20 cu M for a 12.5 MT batch size. (5358 gallons) Has edible oil capacity of 42,000 pounds - designed to run 35,000 pound batches. Cylindrical tank with heating/cooling coils, nozzles for oil, sight glass, hydrogen ports, top mounted agitator. MAWP 90 psig at 500F. OD 2000 mm x height 8000 mm. Shipping dimensions L x W x H are 8000 x 2300 x 2500. Will fit into a 40 ft HC container. NEW reactor so we can design to your needs - lead time 10-12 weeks. FOB India Port Nhava Sheva

Condition

Graham Steam Ejector System 2-stage, Includes 8" Barometric Precondenser water rated FV & 15...

Location

India

Process/Vacuum

4 Items

Asset

Description

Condition

Location

Steam Ejectors

Asset ID: B2078

Graham

Graham Steam Ejector System 2-stage, Includes 8" Barometric Precondenser water rated FV & 15 psig. SN: 17-14060-1. We count (6) precondensrs, and 5 steam ejectors. Incomplete systems. There should be (3) complete sets there but Buyer will have to inspect. Two skids - priced for the LOT.

Condition

Location

### Ultra-high Vacuum (UHV) system ### Vacuum system is designed to simulate the space...

Ultra High Vacuum System

Asset ID: V1001

### Ultra-high Vacuum (UHV) system ### Vacuum system is designed to simulate the space environment of a geosynchronous satellite. This includes considerations for vacuum, temperature, radiation, and other factors. Base pressures 1 x 10(-9) to 1 x 10 (-10) torr. Main pieces listed below - See Details of each in Link. **Features** - Vacuum Chamber: Ultra-high vacuum chamber with all sensors / gauges to simulate the space environment of geosynchronos satellites - Pumping System, Pfeiffer molecular diffusion vacuum pump - Temperature Control - Monitoring and Control System - Safety System, interlocks **Capabilities** - Radiation Simulation - Solar Simulation

Condition

Location

2 Stage steam ejector vacuum system. Gardner Nash Kinema Master Serial number 844042: barometric...

Vacuum System Steam Ejector

Asset ID: 7114

Gardner Nash Kinema

2 Stage steam ejector vacuum system. Gardner Nash Kinema Master Serial number 844042: barometric condenser PY, 1st stage steam ejector Y, intercondenser YZ, and 2nd stage steam ejector Z. Gardner Nash Kinema project #1961499, sales order# 1407528. Last used with a thin film dryer. System removed and ready to load. RD-?

Condition

Location

2 Stage steam ejector vacuum system. Nash Kinema Master serial # 844402, serial number for the...

Vacuum System Steam Ejector

Asset ID: 7115

Nash Kinema

2 Stage steam ejector vacuum system. Nash Kinema Master serial # 844402, serial number for the set 9104082. Barometric condenser PY, 1st stage steam ejector Y, intercondenser YZ, 2nd stage steam ejector Z. Missing 2nd stage steam ejector (EJ-0315) but we can order it for you. Used - Last used with a thin film dryer - removed and ready to load. RD-79

Condition

Location

Pump

45 Items

Asset

Description

Condition

Location

Biodiesel Loadout Pump

Asset ID: BD-1507

Biodiesel loadout pump

Condition

Location

Teikoku Canned Motor Pump F60-3211N4BL-0408SF1-AV, S/N 2016006025, 110 GPM, 214 TDH, Driven by...

Can Pump

Asset ID: P-1006

Teikoku

Teikoku Canned Motor Pump F60-3211N4BL-0408SF1-AV, S/N 2016006025, 110 GPM, 214 TDH, Driven by 16.6 HP, 460 volts, 60 Hz, 3 phase. Last used as Dow X Water Pump

Condition

Location

Teikoku 22 GPM, 155 Ft, 10 HP, 3600 RPM, 14.5 FLA. SN 4014004318 Last used as FD Dryer Feed pump.

Can Pump

Asset ID: P-102

Teikoku

Condition

Location

Teikoku canned motor pump 7 GPM, 148 ft. hd.F41-217U4L-0204S1-AV, S/N FG-1378A, 36.4 GPM, 148...

Can Pump

Asset ID: P-107

Teikoku

Teikoku canned motor pump 7 GPM, 148 ft. hd.F41-217U4L-0204S1-AV, S/N FG-1378A, 36.4 GPM, 148 Ft,3.1 HP, 3450, RPM, 7.5 Fla

Condition

Location

Teikoku Canned Motor Pump F60-3211N4BL-0204F1-AV, s/n 2014004324, 22 GPM, 103 Ft, 5.3 HP, 3600...

Can Pump

Asset ID: P-201

Teikoku

Teikoku Canned Motor Pump F60-3211N4BL-0204F1-AV, s/n 2014004324, 22 GPM, 103 Ft, 5.3 HP, 3600 RPM, 8 Fla. Last used as Filtered FD Feed Pump

Condition

Location

Flowserve Innomag Feed pump 10 HP, 460 volts, 60 Hz, 3 phase with VFD. 1.5x1x8 inches. ...

Can Pump

Asset ID: P305

Flowserve

Flowserve Innomag Feed pump 10 HP, 460 volts, 60 Hz, 3 phase with VFD. 1.5x1x8 inches. BM69011100-BCO, Serial 69400, 6.9 inch imp. Diameter. Last used as Methanol Daty Tank Feed Pump

Condition

Location

Teikoku Feed pump F60-3211N4BL-0204SF1-AV, S/N 2014004326, 15 gpm, 166 Ft. Hd, Driven by 5.3 HP,...

Can Pump

Asset ID: P-502

Teikoku

Teikoku Feed pump F60-3211N4BL-0204SF1-AV, S/N 2014004326, 15 gpm, 166 Ft. Hd, Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase, with VFD motor. Last used as ME Dryer Feed pump

Condition

Location

Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004319,20 gpm, 160 Ft. Hd., Driven by 5.8...

Can Pump

Asset ID: P-505

Teikoku

Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004319,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as ME Dryer Drain pump

Condition

Location

Teikoku F60-3215N4BL-0204SF1-AV, S/N 2014004320 pump, 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD....

Can Pump

Asset ID: P-508

Teikoku

Teikoku F60-3215N4BL-0204SF1-AV, S/N 2014004320 pump, 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Post E Dryer Flash Vessel Drain pump

Condition

Location

Teikoku 3.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as PW Feed pump

Can Pump

Asset ID: P-509

Teikoku

Condition

Location

Teikoku feed pump 15 GPM, 180 ft. hd., driven by 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. ...

Can Pump

Asset ID: P-703

Teikoku

Teikoku feed pump 15 GPM, 180 ft. hd., driven by 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Feed pump

Condition

Location

Teikoko Reboiler pump F41-41TU4L-0608T1-AV, S/N FG-1382A, 22.8 HP, 460 volts, 60 Hz, 3 phase. ...

Can Pump

Asset ID: P-705

Teikoku

Teikoko Reboiler pump F41-41TU4L-0608T1-AV, S/N FG-1382A, 22.8 HP, 460 volts, 60 Hz, 3 phase. Last used as Reboiler pump

Condition

Location

Teikoko Reflex pump 25 GPM, 169 ft. Hd., F60-3315N4BL-0204TF1-AV, S/N 2014004322, 16.6 HP, 460...

Can Pump

Asset ID: P-709

Teikoku

Teikoko Reflex pump 25 GPM, 169 ft. Hd., F60-3315N4BL-0204TF1-AV, S/N 2014004322, 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Reflex pump

Condition

Location

Teikoku Feedpump F64-215C4BM-0405S1V-AV, S/N CV-4637-2

Can Pump

Asset ID: P801

Teikoku

Condition

Location

Teikoku Feed pump 150 GPM, Driven by 1HP, 460 volts, 60 Hz, 3 Phase. Last used as Feed pump

Can Pump

Asset ID: P-807

Teikoku

Condition

Location

Teikoku Reboiler pump FA41-316X4M-0608R1V-AV, S/N CK-2744, 10.1 HP, 460 volts, 60 Hz, 3 phase. ...

Can Pump

Asset ID: P-808

Teikoku

Teikoku Reboiler pump FA41-316X4M-0608R1V-AV, S/N CK-2744, 10.1 HP, 460 volts, 60 Hz, 3 phase. Last used as Reboiler pump

Condition

Location

Sulzer Pump CPT 21-3, No 100132829, 2725 RPM. Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase with...

Can Pump

Asset ID: P-B100

Sulzer

Sulzer Pump CPT 21-3, No 100132829, 2725 RPM. Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as B100 Loading Station Pump

Condition

Location

Sulzer centrifugal pump CPT22-1 LF, SN 100131477, 31.6 GPM, 109.9 ft hd, 6.5. Driven by 5 HP,...

Centrifugal Pump

Asset ID: P-109

SULZER

Sulzer centrifugal pump CPT22-1 LF, SN 100131477, 31.6 GPM, 109.9 ft hd, 6.5. Driven by 5 HP, 1770 RPM, 460 Volts, 60 Hz, 3 phase. Last used as FD DE Vessel Drain pump

Condition

Location

Sulzer Centrifugal pump CPT-23-1B, S/N 100131147, 40 GPM, 120 Ft. Hd. Driven by 7.5 HP, 460...

Centrifugal Pump

Asset ID: P-112

SULZER

Sulzer Centrifugal pump CPT-23-1B, S/N 100131147, 40 GPM, 120 Ft. Hd. Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase motor. Last used as VLF Feed pump

Condition

Location

Dean pump 4x6x10 S/N 196598, 1320 GPM at 195 head, TECO 100 HP, 3650 RPM motor

Centrifugal Pump

Asset ID: BDPC-158

Dean Pump

Condition

Location

Centrifugal Pump 3x4x8 RA3146 Dean pump Division S/N 175506, 235 ft Head, 490 GPM, 3500 RPM,...

Centrifugal Pump

Asset ID: P-1003

Dean Pump

Centrifugal Pump 3x4x8 RA3146 Dean pump Division S/N 175506, 235 ft Head, 490 GPM, 3500 RPM, Impeller 7-7/8. Driven by 60 HP, 3550 RPM, 60 Hz Motor. Last used as DowX NF Pump

Condition

Location

Centrifugal Pump CPT31-6 Sulzer 100133882 8x6x13, 120 ft Head, 1500 USGPM, 1770 RPM Driven by 75...

Centrifugal Pump

Asset ID: P-1005A

Sulzer

Centrifugal Pump CPT31-6 Sulzer 100133882 8x6x13, 120 ft Head, 1500 USGPM, 1770 RPM Driven by 75 HP, 1770 RPM, 60 Hz Motor. Last used as Cooling Tower Pump

Condition

Location

Centrifugal Pump CPT31-6 Sulzer 10013390, 1500 GPM, 120 Ft Hd. Driven by 75 HP, 1800RPM, 460...

Centrifugal Pump

Asset ID: P-1005B

Sulzer

Centrifugal Pump CPT31-6 Sulzer 10013390, 1500 GPM, 120 Ft Hd. Driven by 75 HP, 1800RPM, 460 volts, 60 Hz, motor. Last used as Dow X Water Pump

Condition

Location

Sanitary pump with explosion proof motor. Turbine pump for negative NPSH pressure to negative...

Explosion Proof Pumps (4)

Asset ID: 8576

China Zhejiang Yuanya Pump Co.

Sanitary pump with explosion proof motor. Turbine pump for negative NPSH pressure to negative pressure 0.09 Mpa. Pump rated at 1 MT/hr at 30 m head (4.6 gpm at 98.4 ft TDH). Pump inlet/outlet 51mm/38mm. All stainless steel 316L. Motor is 2.2 KW (3 HP) at 3410 rpm 460v 3/60. Quantity (4) - priced separately

Condition

Location

Teikoku F60-3211N4BL-0204SF1-AV, S/N 2015004881 Pump 20 GPM, 92 Ft, 5.3 HP, 3600 RPM, 8.0 FLA

Feed Pump

Asset ID: P304

Teikoku

Condition

Location

Teikoku F60-3115N4BL-02045G1-AV, S/N 2014004327 Pump 20 GPM, 92.4 Ft, 3.3 HP, 3600 RPM, 5.5 FLA

Feed Pump

Asset ID: P-404

Teikoku

Condition

Location

Busch Vacuum pump LB0063A AMB XX IX,4 GPM, Driven by 7.5 HP, 1800 RPM, 38 ACFM 5.5 FLA, 28.9 in...

Liquid Ring Pump

Asset ID: P116

BUSCH

Busch Vacuum pump LB0063A AMB XX IX,4 GPM, Driven by 7.5 HP, 1800 RPM, 38 ACFM 5.5 FLA, 28.9 in HG. Last used as FD Dryer Vacuum Pump

Condition

Location

Busch vacuum pump 3.0 HP, 460 volts, 60 Hz, 3 phase. Last used as FD Filter Vacuum System

Liquid Ring Pump

Asset ID: P-111A

BUSCH

Condition

Location

Busch Vacuum Pump Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase. S/N 600015607/1Last used as ME...

Liquid Ring Pump

Asset ID: P-507

BUSCH

Busch Vacuum Pump Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase. S/N 600015607/1Last used as ME Recovery Vacuum System

Condition

Location

Viking positive displacement pump by Central State Group, 20 GPM, 160 Ft. Hd.,...

PD Pump

Asset ID: P-922

Viking

Viking positive displacement pump by Central State Group, 20 GPM, 160 Ft. Hd., F60-3215N4BL-0204SF1-AV, S/N 2014004317, . 25 HP, 460 volts, 60 Hz, 3 phase. Last used as Glycerin Unloading Pump

Condition

Location

Sulzer Pump model CPT23-1B designed for Capacity 150 gpm @ 99 Head. 1770 RPM. No. 100131479. ...

PD Pump

Asset ID: P115

SULZER

Sulzer Pump model CPT23-1B designed for Capacity 150 gpm @ 99 Head. 1770 RPM. No. 100131479. Driven by 7.5 HP motor 1800 rpm. Last used as FD Loading Pump.

Condition

Location

Viking Positive displacement pump 10.3 GPM, 218.8 Ft, 3 HP, 28 ft Net positive suction head,...

PD Pump

Asset ID: P-214

Viking

Viking Positive displacement pump 10.3 GPM, 218.8 Ft, 3 HP, 28 ft Net positive suction head, suction pressure 25.4 psi. Last used as Sweet water drain pump

Condition

Location

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. ...

Plunger Pump

Asset ID: P-303

CAT Pump

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as FFA HP Feed Pump.

Condition

Location

DXP Cat Pump 1DXM75627,10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last...

Plunger Pump

Asset ID: P-203

CAT Pump

DXP Cat Pump 1DXM75627,10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as FD HP Feed Pump

Condition

Location

DXP Cat Pump 1DXM7562T, 10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last...

Plunger Pump

Asset ID: P-207A

CAT Pump

DXP Cat Pump 1DXM7562T, 10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as PW HP Feed pump

Condition

Location

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. ...

Plunger Pump

Asset ID: P-405

CAT Pump

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as Methanol Super-2 HP Feed Pump.

Condition

Location

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. ...

Plunger Pump

Asset ID: P-307

CAT Pump

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 Material 316 SS. Last used as Methanol Super-1 HP Feed Pump.

Condition

Location

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. ...

Plunger Pump

Asset ID: P-402A

CAT Pump

CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as Methyl Ester HP Feed Pump.

Condition

Location

Pump 41 GPM, 92 Ft, 4.6 HP, 3500 RPM, 7.5 Fla, Last used as Biodist. Feed Pump

Pump

Asset ID: P120

Condition

Location

Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004312,20 gpm, 160 Ft. Hd., Driven by 5.8...

Pump

Asset ID: BD-1511

Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004312,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as Pump from BD Dryer

Condition

Location

Viking pump NPE Series S/N 15T1HDA2, 3.0 HP, 460 Volts, 60 Hz, 3 phase with VFD. Last used as...

Pump

Asset ID: P-512

Viking

Viking pump NPE Series S/N 15T1HDA2, 3.0 HP, 460 Volts, 60 Hz, 3 phase with VFD. Last used as Heavy Phase Drain Pump

Condition

Location

Pump 264 GPM, 138 Ft., 22.8 HP, 3600 RPM, 31 FLA

Pump

Asset ID: P-705A

Teikoku

Condition

Location

Teikoku F41-215U4L-02045S1-AV, S/N FG-1379A Pump 13.2 GPM, 29.3 Ft. Hd, Driven by 2.3 HP, 3600...

Pump

Asset ID: P-706

Teikoku

Teikoku F41-215U4L-02045S1-AV, S/N FG-1379A Pump 13.2 GPM, 29.3 Ft. Hd, Driven by 2.3 HP, 3600 RPM, 3.7 FLA motor

Condition

Location

Vacuum pump by Gardner Denver Nash, Model 44SX010V5K000, 1750 max RPM, Driven by 3 HP, 17670...

Vacuum Pump

Asset ID: P-8622

Nash

Vacuum pump by Gardner Denver Nash, Model 44SX010V5K000, 1750 max RPM, Driven by 3 HP, 17670 RPM, 60 Hz motor. Last used as Flash Dryer Vacuum Pump

Condition

Location

Flowserve Innomag Pump BM69011100-BCO, 6.9 Imp. Dia/8.25 inch S/N 68429, 1.5x1x8 inches

Wet methanol pump

Asset ID: BD-1510

Flowserve

Condition

Location

AMT centrifugal pump 429K-X8 driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump ...

Pump/Centrifugal

16 Items

Asset

Description

Condition

Location

Centrifugal Pump

Asset ID: V2233

AMT

AMT centrifugal pump 429K-X8 driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal.. Qty(4) - priced separately

Condition

Location

AMT self priming centrifugal pump model 2876-95. Approx capacity 250 gpm at 60 ft TDH. Driven by...

Centrifugal Pump

Asset ID: V2249

AMT

AMT self priming centrifugal pump model 2876-95. Approx capacity 250 gpm at 60 ft TDH. Driven by 7.5 HP motor 3525 rpm 460/3/60

Condition

Location

AMT self priming centrifugal pump model 2875-95. Driven by 5 HP motor 3525 rpm 460/3/60. Approx...

Centrifugal Pump

Asset ID: V2250

AMT

AMT self priming centrifugal pump model 2875-95. Driven by 5 HP motor 3525 rpm 460/3/60. Approx capacity 250 gpm at 60 ft TDH. Quantity (6), priced separately

Condition

Location

AMT self priming centrifugal pump model 2875-95 driven by 5 HP motor 3550 rpm 480/3/60. Rate...

Centrifugal Pump

Asset ID: V2262

AMT

AMT self priming centrifugal pump model 2875-95 driven by 5 HP motor 3550 rpm 480/3/60. Rate approx 250 gpm. See pump brochure

Condition

Location

Cast iron self priming pump with motor

Centrifugal Pump

Asset ID: V2268

Condition

Location

Durco centrifugal pump. Size 2K 3x1.5-10/96. Serial 405665. Includes 50HP Marathon electric...

Centrifugal Pump

Asset ID: 7139B

Durco

Durco centrifugal pump. Size 2K 3x1.5-10/96. Serial 405665. Includes 50HP Marathon electric motor @ 3515 RPM. 230/460V, 116/80A. Used - will need reconditioning

Condition

Location

Centrifugal pump with Baldor Super-E Cat. No EM3771T, Spec 07H02W279, Frame 215T, 10 TE HP, sn...

Centrifugal Pump

Asset ID: 7137G

Centrifugal pump with Baldor Super-E Cat. No EM3771T, Spec 07H02W279, Frame 215T, 10 TE HP, sn F999, Volts 230/46, 23.8/11.9 Amps, 3525 RPM, 60 Hz, 3 phase

Condition

Location

Recirculation pump. 4350 GPM @ 65TDH, Alloy D20, Durco Mark III Centrifugal pump, Size...

Centrifugal Pump

Asset ID: 380-PU-872

Durco

Recirculation pump. 4350 GPM @ 65TDH, Alloy D20, Durco Mark III Centrifugal pump, Size 3K10x8-16H/160RV. Designed for capacity 4950 gallons at 65 ft TDH. Skid mounted. Inlet 10 inch/outlet 8 inch. Driven by 125 HP motor 460v/1200 rpm .Part of Evaporator package PK-6045 and might not be able to be sold separately - Ask Us. For a list of all components, enter "pkevap" in the keyword search terms box.

Condition

Summit centrifugal pump, stainless steel wetted parts. Model 2196. Size 3 x 4-13, impeller dia...

Location

Saskatchewan, Canada

Centrifugal Pump SS

Asset ID: 7137A

Summit

Summit centrifugal pump, stainless steel wetted parts. Model 2196. Size 3 x 4-13, impeller dia 12.25. ser 331303. Originally designed fo a 40HP Baldor electric motor @ 1760 RPM. 230/460V. We are offering ss pump, bedplate - Only. If you want motor, please add $400 and we will mount a used working TEFC 40 HP motor on pump/bedplate. Price includes loading on your truck

Condition

Location

Waukesha Cherry Burrell Centrifugal Pump, stainless steel. Close coupled with motor.10 HP...

Centrifugal Pump, ss

Asset ID: 5994

Waukesha

Waukesha Cherry Burrell Centrifugal Pump, stainless steel. Close coupled with motor.10 HP Baldor-Reliance- 2x2. S/N 1000002442475

Condition

Location

AMT centrifugal pump model 429K-X8 stainless steel driven by 1 3/4 HP motor. Stainless steel 1...

Pump

Asset ID: V2270

AMT

AMT centrifugal pump model 429K-X8 stainless steel driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal

Condition

Location

Stainless Steel close coupled sanitary centrifugal pump. Waukesha S-line Model C218. 2 x 1 1/2 -...

Pump, Sanitary Centrifugal

Asset ID: 5993

Waukesha

Stainless Steel close coupled sanitary centrifugal pump. Waukesha S-line Model C218. 2 x 1 1/2 - 8. Max capacity 217 gpm @ 42 ft head. Gator Motor is 5 HP, 1765 rpm 460v 3/60. All wetted parts are stainless 316L. Open impeller design for easy cleaning, CIP capability.

Condition

Location

Self Priming Centrifugal Pump with motor

Self Priming Centrifugal Pump

Asset ID: V2269

Condition

Location

AMT centrifugal pump model 429K-X8 stainless steel driven by 1 3/4 HP motor. Stainless steel 1...

Self Priming Centrifugal Pump

Asset ID: V2263

AMT

Condition

Location

AMT centrifugal pump 429K-X8 self priming driven by 1 3/4 HP motor. Max flow 33 gpm at 42 ft...

Self Priming Pump

Asset ID: V2231

AMT

AMT centrifugal pump 429K-X8 self priming driven by 1 3/4 HP motor. Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal.

Condition

Location

AMT self priming cast iron centrifugal pump Model 2876-96. Pump 3 1/4 x 3 1/4 AMT pump with 7.5...

Self Priming Pump 3"

Asset ID: V2225

AMT

AMT self priming cast iron centrifugal pump Model 2876-96. Pump 3 1/4 x 3 1/4 AMT pump with 7.5 HP motor. Lot 114. See pump curve - approx 250 gpm at 60 ft TDH

Condition

Location

Nikkiso non-seal pump (sealless). This pump is new unused. still in original crate. Also called...

Pump/Magnetic Coupled

1 Items

Asset

Description

Condition

Location

Non-Seal Pump

Asset ID: 2031

Nikkiso

Nikkiso non-seal pump (sealless). This pump is new unused. still in original crate. Also called canned-motor pumps. Leak free pump best suited for use with chemical industry for metering critical chemicals/fluids. Nikkiso Non-Seal Pump Model HX22C-5 Item No 3027-1200-7, Designed for 30 gpm at 129.7 Ft TDH. Output 4.96 HP 460v 3/60 3600 RPM. Ready to load

Condition

Location

Flex Pro peristaltic metering pump A2F series. Max feed 14.3 GPH and 50 psi, 3/8 inch OD tubing ...

Pump/Metering

1 Items

Asset

Description

Condition

Location

Metering Peristaltic Pump

Asset ID: V2230

Flex-Pro

Flex Pro peristaltic metering pump A2F series. Max feed 14.3 GPH and 50 psi, 3/8 inch OD tubing 115v. Serial # 000908938-180716

Condition

Location

Simflo Vertical 7-stage Multistage pump. Motor is 300 HP, 3565 rpm 460v 3/60 inverter duty. Model...

Pump/MultiStage

1 Items

Asset

Description

Condition

Location

Vertical Multistage Pumps and MCC

Asset ID: PK-2097

Simflo

Simflo Vertical 7-stage Multistage pump. Motor is 300 HP, 3565 rpm 460v 3/60 inverter duty. Model SD10C. (New model cross references to SP10L - same pump). Pump designed for 600 gpm at 1245 ft TDH. Includes MCC with VFD drives and the portable building the MCC is in. * You are only purchasing two pumps with motors (no piping or anything in background of the pictures). Purchase DOES include complete MCC building w/ VFD's and MCC. Will be an oversized load. Price is for the LOT. Package Includes: - Two (2) Simflo (Simmons) Vertical pumps Model SD10C (SP10L is new model # but same pump) 7-Stage, 600 gpm at 1245 ft/head, 300 HP Bowl dia 10.19", BEP head 158 ft per stage - MCC Portable Building - MCC 4000A Cutler-Hammer Advantage Series 2100 480 V 3 Phase 3-wire 60 Hz 3200 A Sect.1-2 800 amp Sect.3-5 1200 amp w/ 4000 amp Main and Breakers for each VFD/pump and includes spare breaker - Starters installed in MCC (2) Allen-Bradley VFD's - CAT # 1336E-BP350-AN-CM-EN AC Input: 300-378 KVA 380-480 V 455 amps 50/60 Hz 3 Phase AC Output: 366 KVA 0-460 V 459.2 amps 0-400 Hz 3 Phase - Allen Bradley PanelView 1000 plc controls This pump package is used. It was in good working order when idled and removed in late 2023. Units are removed and ready to load.

Condition

Location

Verderflex peristaltic pump by Verder. Model VF65 FCNBSS/S, serial 43260B6. Driven by gearmotor...

Pump/Peristaltic

2 Items

Asset

Description

Condition

Location

Peristaltic Pump

Asset ID: AF15

Verder

Verderflex peristaltic pump by Verder. Model VF65 FCNBSS/S, serial 43260B6. Driven by gearmotor SEW 7.5 KW (10HP) at 1775 rpm inverter duty. Material cast iron body/cast iron rotor. Physical size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev. Flow capacity controlled by VFD and ranges from approx. 60 gpm at 75 psig to 90 gpm at 10 psig. See pump curves in Link. Maximum solids content 16.25mm compressible. Maximum lift is 9.5 mWc (meters water column)

Condition

Location

PC-31 Slurry Stock. Verderflex peristaltic pump by Verder. Model VF65, serial 43260E6. Driven by...

Peristaltic Pump

Asset ID: AF16

Verderflex

PC-31 Slurry Stock. Verderflex peristaltic pump by Verder. Model VF65, serial 43260E6. Driven by gearmotor Baldor 10Hp at 1760 rpm inverter duty. Gearbox ratio 38.4:1. Material cast iron body/cast iron rotor. Size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev. Flow capacity controlled by VDF and ranges from approx. 60 gpm at 75 psig to 90 gpm at 10 psig. See pump curves in Link. Maximum solids content 16.25mm compressible. Maximum lift is 9.5 mWc (meters water column)

Condition

Location

Flowserve positive displacement rotary gear pump, Model 1.5GRM. Suction/Discharge 1-1/2" Shaft...

Pump/Positive Displacement

3 Items

Asset

Description

Condition

Location

High Pressure Gear Pump

Asset ID: 7628

Flowserve

Flowserve positive displacement rotary gear pump, Model 1.5GRM. Suction/Discharge 1-1/2" Shaft size 7/8". Last used for High pressure pump for votator, Flows to 1200 gpm at 500 psi. GR pumps provide high efficiency, pulse-free pumping, Ser no. 1162803CHP001A. Driven by Baldor 15 HP 230/460v 3/60 at 1160 RPM.

Condition

Location

Bare pump - Viking Pump Model LQ4124R, Serial No. 1702284, Size is 2.5" inlet x 2.5" outlet,...

Positive Displacement Pump

Asset ID: 7139I

Viking

Bare pump - Viking Pump Model LQ4124R, Serial No. 1702284, Size is 2.5" inlet x 2.5" outlet, cast iron body with mechanical seal. Includes integral relief valve in head, Has gear unit. Nominal flow of 135 gpm,. Approx 125 gpm. Designed to be driven by 10HP motor but motor is not included (photo shows motor but it is not there). . Used - will need reconditioning

Condition

Location

Viking positive displacement pump. Model LL4124A, ser no. 11297045 . Size 3 x 3, LL4124A - pump...

Positive Displacement Pump 3x3

Asset ID: 7139A

Viking

Viking positive displacement pump. Model LL4124A, ser no. 11297045 . Size 3 x 3, LL4124A - pump is rated up to 140 gpm. Includes pump, gearbox ratio 3.705 (IN 1750 / OUT 472 rpm), baseplate - no motor (was sized for 30HP motor at 1750 rpm missing). Used - will need reconditioning; it has sat idle for quite a while. Price includes loading on your truck.

Condition

Location

Worthington Split case pump. Model 5LN-22. Size is 8" x 5" - 22" with 22 inch impeller, epoxy...

Pump/Split Case

2 Items

Asset

Description

Condition

Location

Pump, Split Case

Asset ID: 7412

Worthington

Worthington Split case pump. Model 5LN-22. Size is 8" x 5" - 22" with 22 inch impeller, epoxy lined pump. Rated at 1250 gpm at 420 ft TDH. Impeller material is a high-nickel content carbon steel. (Requires 250 HP motor 1775 rpm - motor not included). See pump curve in document links This pump has been rebuilt and was never used after rebuild. Used as a back up fire pump so it has high head. Rebuilt by HydroAire Services job # 6082-12-11-11. Rotation: GREY pump looking at the shaft, rotation is counter clockwise. Note Worthington pumps are now backed by Flowserve. Bare pump only - Grey. Shipping dimensions 48 x 48 x 45" tall, 1350 pounds.

Condition

Location

Aurora Pump 8" split case centrifugal water pump. No. 91-10426, Type 411 SF. Size 8x8x11B. ...

Split Case Pump

Asset ID: 6574

Aurora

Aurora Pump 8" split case centrifugal water pump. No. 91-10426, Type 411 SF. Size 8x8x11B. 2000 GPM. 120 Ft. head. 1750 RPM. Powered by a 75 HP General Electric motor. Model 5K365BL21502, S/N R66141250. 1780 RPM. 230/460V, 3 Ph., 60Hz, 175/88A.

Condition

Location

Vertical sump pump by Pumpworks model 820. New - stored in warehouse as spare. Size 1.5 x 1 -8...

Pump/Sump

1 Items

Asset

Description

Condition

Location

Sump Pump

Asset ID: 1945

Pumpworks

Vertical sump pump by Pumpworks model 820. New - stored in warehouse as spare. Size 1.5 x 1 -8 with 8" impeller. Material carbon steel, heavy duty configuration. Rated capacity 25 gpm at 58 ft TDH. Pump serial number 18-23305-8-1. Motor is Baldor 2 HP 1755 rpm 230/460v 3/60 TEFC Frame 145TC

Condition

Location

Vertical turbine cooling tower pump. 3 stage design. Bowls are 14" dia, 10" pipe, 114" OAL. With...

Pump/Turbine Pump

1 Items

Asset

Description

Condition

Location

Vertical Turbine Pump

Asset ID: P-4300D

Johnston

Vertical turbine cooling tower pump. 3 stage design. Bowls are 14" dia, 10" pipe, 114" OAL. With 150 HP US Electric Motor. 460V, 167A, 60Hz, 1785 RPM. Built 2003

Condition

Location

PIAB air driven vacuum ejector. Model M125D, series 21.01.010. Vacuum gauge can be placed on...

Pump/Vacuum Pump

2 Items

Asset

Description

Condition

Location

Vacuum Ejector Pump

Asset ID: S3210

PIAB

PIAB air driven vacuum ejector. Model M125D, series 21.01.010. Vacuum gauge can be placed on either side. Cross references to PIAB model M50B5-EN . Very little use, in original box

Condition

Vacubrand 4C vacuum pump, Model MD 4C NT. Thee-stage diaphragm pump rated at 2.2 cfm and max...

Location

Rome, GAJacksonville, IL

Vacuum Pump

Asset ID: V2206

Vacubrand

Vacubrand 4C vacuum pump, Model MD 4C NT. Thee-stage diaphragm pump rated at 2.2 cfm and max vacuum 1.1 torr. Has 4 heads, 3 stages

Condition

Location

### 140-Ton Bulk Storage Silo System (NOL-TEC Systems) ### - **Capacity:** 10,750 Cubic Feet =...

Silo

1 Items

Asset

Description

Condition

Location

Silos 10,750 cu ft NEW

Asset ID: 7884

NOL-TEC Systems

### 140-Ton Bulk Storage Silo System (NOL-TEC Systems) ### - **Capacity:** 10,750 Cubic Feet = approx. 70 Tons per silo (There are two silos - sold and priced separately) - **Dimensions:** Nominal Diameter: 14'-0, Overall Height: 100'-0" - Eave Height - **Materials of Construction:** A36 Carbon Steel (14-ring cylinder) - **High-Flow Hopper Design:** **Upper Hopper:** 3/16" A36 steel, **Lower Hopper:** 3/16" A36 steel with 10ga 304SS Stainless Steel liners to prevent bridging - **Design Standards:** IBC-2009 / Max Material Density: 48 Lbs/Cu. Ft - **Exterior Access & Venting:** Top-mounted flange configuration for bin vents or dust filtration - **Pneumatic Connections:** Configured for 6" Sch. 40 pneumatic fill and recycle **Never Installed.** Equipment is currently located in a laydown yard and is staged for immediate loading. Full assembly drawings are available, including weld schedules and anchor bolt layouts for foundation engineering ### Additional Equipment (Priced Separately) SEE Asset 7341 The following engineered blower packages, designed for integration with these silos, are available: * **75 HP Pressure Blower Package** (Hardy Pro-Air/Gardner Denver) * **30 HP Vacuum Blower Package** (Hardy Pro-Air/Gardner Denver)

Condition

Location

Rack 1 Bottom Shelf. mainly E-H electronic transmitters - Electronic transmitters: (10) E&H

Spare Parts

4 Items

Asset

Description

Condition

Location

Endress Hauser Spares 4

Asset ID: V2229

Endress Hauser

Condition

Location

Rack 1, shelves 1&2 - (5) AVCO valve and valve actuators - AV Automatic Valve model...

Misc Spares 1

Asset ID: V2226

Rack 1, shelves 1&2 - (5) AVCO valve and valve actuators - AV Automatic Valve model D2003ACWR-1 - 4 Endress Hauser flow transmitters - 2 red metering pumps - 3 blue items - Iwaki Stroke rate and length initiator - Truflo flow meter and transmitter, model TKM - Grundfos pump Pmax 24 watts, 2.0 gph at 230 psi - paddle wheel flowmeter

Condition

Location

Rack 1, shelves 3&4 - Metering pump. Pulsatron by Pulsafeeder item LPH7MA-KTC3-XXX, built 2029,...

Misc spares 2

Asset ID: V2227

Rack 1, shelves 3&4 - Metering pump. Pulsatron by Pulsafeeder item LPH7MA-KTC3-XXX, built 2029, seria 976369. Capacity 240 GPD at 35 psi. 115v single phase - Close coupled pump, self riming. TDRfoce Model FL-540. Capacity 35 LMP. Power 115v - Chemical pump, new. Blue housing, stainless steel - FlexPro peristaltic pump. A2F series - Edwards high vacuum pump, model E2M2, serial 58701 - AMT centrifugal pump and motor Model 429K-X8 - AMT self priming cast iron pump and motor - Little Giant pump, close coupled.

Condition

Location

Rack 2 - Sanitary piping fittings

Misc Spares 3

Asset ID: V2228

Condition

Location

Heyl & Patterson Rotary Railcar Dumper System Designed to handle 3000 TPH. Can purchase outright...

Systems & Packages

1 Items

Asset

Description

Condition

Location

Railcar Dumper System

Asset ID: 1070

Heyl & Patterson

Heyl & Patterson Rotary Railcar Dumper System Designed to handle 3000 TPH. Can purchase outright to relocate. Included - Dumper, 309 ft conveyor, 2 control rooms, building over the dumper, all electrical, dust suppression system. Details - Inclined conveyor capacity 3000 TPH, 72" wide x 309' long at 476 fpm. Roller spacing 1'-0" with 450 HP motor drive. Inclined 16 degrees, length 309'-10-1/4" pulley centers. Also a feeder conveyor 96" wide x 16 ft long at capacity 3000 TPH, Size/Belt Speed 96”/110 FPM- Variable Speed Roller Spacing 1’0” Max HP 125 motor 16’0” Pulley Centers. Hoppers: Dims and Angles 24’ W x 47’ L x 35’ Ht, 74.8 Min Slope, 70 degree Angles Lining 1/2” Tivar 88 Steel Thickness 3/8”. Conveyor is all galvanized, aluminum conduit, walkway on one side, Paramax 9000 gearbox. Railcar Dumper is equipped with ventilation fans, dust suppression system, 5 ton hoist, Hazleton sump pump model 75-350 SHW, Cutler Hammer MCC rated at 2500A horizontal bus 480v 3/60. . Not Included: rotary stacker conveyor shown at end of run. Installed 2010 and idled in 2012 - used approx 2 years.. See videos in Link. The video showing operation is not this one but is typical.

Condition

Location

**CO2 tank - bullet. Insulated. Capacity 200 ton** Still installed, built 1985 Idled 2021....

Tanks & Pressure Vessels/Bullet

2 Items

Asset

Description

Condition

Location

CO2 Tank - Bullet 200 ton

Asset ID: 1023

Trinity Industries

**CO2 tank - bullet. Insulated. Capacity 200 ton** Still installed, built 1985 Idled 2021. Excellent condition, owned by a major industrial company Serial number 115777. CRN number F-4681.3, ASME Nat'l Bd # 333. MAWP 275 psig at 125F Nominal size 10'-10" dia x 61 ft long. Capacity 47,000 water gallons Price includes removal and loading on your truck

Condition

**CO2 tank - bullet. Insulated. Capacity 300 ton** Still installed, built 1997, Idled 2021....

Location

Quebec, Canada

CO2 Tank - Bullet 300 ton

Asset ID: 1024

Drummond Welding & Steel

**CO2 tank - bullet. Insulated. Capacity 300 ton** Still installed, built 1997, Idled 2021. Excellent condition, owned by a major industrial company Serial No. 6125, CRN D1931.6 - Built and certified to ASME pressure vessel specifications Section VIII, Div 1 (no Nat'l Bd number). see U-1 form. MAWP 276 psig at 125F Nominal size 10’-10” ID x 91’-3” long. Volume 543,000 pounds water weight = 65,342 gallons Price includes removal and loading on your truck

Condition

Dry air tank, 400 gallons, C/S

Location

Quebec, Canada

Tanks & Pressure Vessels/Carbon Steel

30 Items

Asset

Description

Condition

Location

Air Receiver

Asset ID: BD1202

Condition

Location

PSV Drain Tank, 300 gallon capacity

BDT PSV Drain Tank

Asset ID: BDT2007

Condition

Location

Dry air receiver tank, 5 feet x 15.8 ft tall, 2177 gallons, C/S

Dry air receiver tank

Asset ID: BT-1201

Condition

Location

Expansion Tank S/N 39367, Wendland Mfg, 100 psi @ 700F MAWP, -20F @ 100 psi MDMT, 3500 gallons

Expansion Tank

Asset ID: T-1000

Wendland

Condition

Location

Squibb Vertical tank 43600 gallon capacity, CS, 13 feet diameter x 44 feet H

Filtered FD Storage Tank

Asset ID: T-114A

Squibb

Condition

Location

Squibb Vertical tank 43600 gallon capacity, CS, 13 feet diameter x 44 feet H

Filtered FD Storage Tank

Asset ID: T-114B

Squibb

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank 12 ft OD x 35 ft H 29600 gal nom-cap, CS

Methanol Storage Tank

Asset ID: T-304

Squibb Tank Co

Condition

Location

Homogenizer. Slurry tank. Agitated vertical carbon steel tank on legs. Size 38" dia x 6 ft s/s...

Slurry Mix Tank

Asset ID: TK-40

Wehrhahn

Homogenizer. Slurry tank. Agitated vertical carbon steel tank on legs. Size 38" dia x 6 ft s/s with 21" legs. Capacity approx 340 gallons. Open top/dish bottom. Agitator is top entering and is 36 inches higher than tank top. OAH approx 10.75 ft. Agitator has two sets of 2-blade propellers at mid and at bottom. Motor 5HP. Can be used as liquid or powder slurry tank.

Condition

Location

Mixing Tank. Vertical agitated carbon steel tank, insulated. Size approx 28" dia x 70" tall on...

Slurry Mix Tank

Asset ID: AF6

Wehrhahn

Mixing Tank. Vertical agitated carbon steel tank, insulated. Size approx 28" dia x 70" tall on 16" legs. Agitator is approx 3.5 ft above top of tank. OAH is approx 10.5 ft. Open top, flat bottom. 125 gallon tank. Top entering agitator is 30 HP with one set of blades. Can be used as liquid or powder mix slurry tank

Condition

Location

Universal Mixer. Vertical Powder mixing vessel with 2HP top entering agitator and side door. ...

Slurry Mix Tank, Powder

Asset ID: TK-22

Wehrhahn

Universal Mixer. Vertical Powder mixing vessel with 2HP top entering agitator and side door. Number 10-066-109, type 2619.000. Mfg 2014. Size 6 ft dia x 7 ft tall seam to seam, approx 1500 gallons. Flat top, dish bottom. Top entering agitator with one set of 4-blades at bottom. Agitator gear box has cooler heat exchanger on oil, recirculated. Side lug mounts. Gasketed door on side. Mfg by Wehrhahn

Condition

Location

Slurry tank used for powder. Vertical carbon steel tank with top entering agitator. Size 60"...

Slurry Tank, Powder

Asset ID: TK-10

Wehrhahn

Slurry tank used for powder. Vertical carbon steel tank with top entering agitator. Size 60" dia x 108" s/s with 28" legs. Capacity is approx 1300 gallons. Agitator is 36" higher than tank. OAH = 108+28+36. Flat top with half tank hinged cover, dish bottom. Includes radiator for hydraulic line cooling of gear reducer. Agitator gearmotor is SEW RM107/A 01/715687601.0001.14. rpm 1782 in/362 out. Has Endress Hauser level transmitter. Agitator has one set of 4-blades at bottom. Was used as cellulose dispensing tank, can be used as slurry tank. Has 4" flanged outlet. Tank has side opening door. Last used as cellulose dispenser

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap,...

Storage Tank

Asset ID: T-921A

Squibb

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap, fabricated of 1/2 inch mild CS plate, Last used as Glycerin Storage Tank

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap,...

Storage Tank

Asset ID: T-921B

Squibb

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap, fabricated of 1/2 inch mild CS plate, Last used as Glycerin Storage Tank

Condition

Location

Vertical cylindrical tank. 8000 gallons, 8 ft dia x 21 ft 4 inches. Last used for Hot oil...

Thermal Fluid Drain Tank

Asset ID: BDT-2006

Vertical cylindrical tank. 8000 gallons, 8 ft dia x 21 ft 4 inches. Last used for Hot oil Thermal Fluid Drain Tank

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap,...

Vertical Cylindrical Tank

Asset ID: TK-04

Squibb Tank Co

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap, fabricated of 1/2 inch mild CS plate S/N 14128

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap,...

Vertical Cylindrical Tank

Asset ID: TK-05

Squibb Tank Co

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap, fabricated of 1/2 inch mild CS plate S/N 14130

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap,...

Vertical Cylindrical Tank

Asset ID: TK-01

Squibb Tank Co

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap, fabricated of 1/2 inch mild CS plate S/N 14129

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap,...

Vertical Cylindrical Tank

Asset ID: TK-02

Squibb Tank Co

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap, fabricated of 1/2 inch mild CS plate S/N 14134

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap,...

Vertical Cylindrical Tank

Asset ID: TK06

Squibb Tank Co

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap, fabricated of 1/2 inch mild CS plate S/N 14135

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap,...

Vertical Cylindrical Tank

Asset ID: TK07

Squibb Tank Co

Vertical cylindrical atmospheric welded steel storage tank 13 ft OD x 44 ft H 43600 gal nom-cap, fabricated of 1/2 inch mild CS plate S/N 14131

Condition

Location

Fenix Vertical Cylindrical Tank 390295.01.09C Rev 00, Shell design pressure 14.9 @ 150F, 1600...

Vertical Cylindrical Tank

Asset ID: T-202

Fenix

Fenix Vertical Cylindrical Tank 390295.01.09C Rev 00, Shell design pressure 14.9 @ 150F, 1600 gallons, 6 ft dia x 8 ft, SS

Condition

Location

CS Storage Tank, 43,600 gallons,approx 14' dia x 44'H. Last used as FD Storage Tank

Vertical Cylindrical Tank

Asset ID: T-101A

Squibb Tanks

Condition

Location

CS Storage Tank, 43,600 gallons, approx 14' dia x 44'H. Last used as FD Storage Tank

Vertical Tank 43,600 gallons

Asset ID: T-101B

Squibb Tanks

Condition

Location

Vertical cylindrical atmospheric welded steel storage tank. Suze 13 ft OD x 44 ft H with 43,600...

Vertical Tank 43,600 gallons

Asset ID: TK-03

Squibb Tank Co

Vertical cylindrical atmospheric welded steel storage tank. Suze 13 ft OD x 44 ft H with 43,600 galon nominal capacity, Material of construction 1/2 inch mild CS plate

Condition

Location

Carbon Steel Tanks. 35,000 Gallons each. - Tanks have been inspected and certified to meet STI...

Vertical Tanks 35,000 Gallon (2)

Asset ID: TK1010

Palmer Manufacturing and Tank

Carbon Steel Tanks. 35,000 Gallons each. - Tanks have been inspected and certified to meet STI SP001 specs and API 653 specs. Manufactured by Palmer Manufacturing and Tank. - Size is 12 ft. diameter x 42 ft. tall. - Internal stainless steel 2 inch heating coils at bottom 24 inch manway and nozzle for agitator mount. Slight cone top, flat bottom with sump. (4) anchor pads for 1" bolt for hold down onto concrete. Tanks were located inside building during operation; tank coating is generally in good condition. See tank inspection reports and results of UT thickness tests in Links. Removed and ready to load. Two (2) tanks available, priced separately.

Condition

McMaster Vessel 300 gallon capacity 38 inch diameter x 60 inches Long and 48 inches high, 12...

Location

Nebraska

Vessel

Asset ID: V-511

McMaster

McMaster Vessel 300 gallon capacity 38 inch diameter x 60 inches Long and 48 inches high, 12 gauge wall thickness, 37415K71

Condition

Location

McMaster Vessel 550 gallon capacity 38 inch diameter x 72 inches Long and 51 inches high, 12...

Vessel

Asset ID: V-513

McMaster

McMaster Vessel 550 gallon capacity 38 inch diameter x 72 inches Long and 51 inches high, 12 gauge wall thickness, 37415K72

Condition

Location

McMaster Carr Tank, 550 gallon capacity, 4 ft dia x 6 ft Horizontal Tank last used as Vent Header...

Vessel

Asset ID: T-1007

McMaster

McMaster Carr Tank, 550 gallon capacity, 4 ft dia x 6 ft Horizontal Tank last used as Vent Header Collection Tank

Condition

Location

Cone-bottom Vessel 250 gallon capacity, 5 feet x 2 feet, CS

Vessel Cone Bottom

Asset ID: V-108

Fenix

Condition

Location

Wet air receiver tank, 3 ft diameter x 5 ft 10 3/8 inch T, 366 gallons

Wet air receiver tank

Asset ID: BT-1200

Condition

Location

Vertical fiberglass tank on legs, cone bottom. Capacity 1000 gallons. Approx. size 5 ft dia x 6...

Tanks & Pressure Vessels/Fiberglass

3 Items

Asset

Description

Condition

Location

Fiberglass Tank 1000 gallon

Asset ID: V2245

LFM

Vertical fiberglass tank on legs, cone bottom. Capacity 1000 gallons. Approx. size 5 ft dia x 6 ft- 3 in tall s/s on 40" legs.

Condition

Location

Fiberglass tank 5000 gallon. Approx size 8 ft dia x 13'-4" tall on legs. On Hardy load cells...

Fiberglass Tank 5000 gallon

Asset ID: V2261

LFM

Fiberglass tank 5000 gallon. Approx size 8 ft dia x 13'-4" tall on legs. On Hardy load cells model HI RCH04-33K rated at 33,000 pounds each. Tk number T-005

Condition

Location

### Methanator Tank Fiberglass, Insulated ### Fiberglass 30,000 gallon Tanks. Tank size is 12 ft...

Vertical Tank 30,000 Gal Fiberglass (4)

Asset ID: T-1001

ICM Standard Parts

### Methanator Tank Fiberglass, Insulated ### Fiberglass 30,000 gallon Tanks. Tank size is 12 ft OD x 36 ft s/s. Flat bottom, slight dished top. Last used for methanator tanks in an ethanol wastewater process. There are 4 available, 3 pieces to each set. Priced for the lot. Approx shipping dimensions for the tank are 13.5 ft wide x 13 ft tall x 38 ft long. Piece on page 2 of drawing is 5 ft dia x 6 ft tall, and decarbonator on page 3 of drawing is 5 ft dia x 10 ft tall.

Condition

Location

Insulated poly tank. Size is 9 ft dia x 13 feet tall for approx 6100 gallons each. Atmospheric...

Tanks & Pressure Vessels/Poly Tank

3 Items

Asset

Description

Condition

Location

Poly Tank Insulated 6100 gallons

Asset ID: V2260

Insulated poly tank. Size is 9 ft dia x 13 feet tall for approx 6100 gallons each. Atmospheric tanks. Qty (2) priced separately

Condition

Location

Vertical poly tank approx size 2 ft dia x 58" tall. Flat bottom/top Capacity approx 100 gallons

Poly Tank Vertical

Asset ID: V2236

Condition

Location

Vertical poly tank, capacity 1500 gallons. Flat bottom, rounded top. 3" outlet

Poly Tank Vertical

Asset ID: V2248

Condition

Location

Air receiver by Manchester Tank. Vertical on base. Size 28" dia x 55: s/s on base for 78" OAH. ...

Tanks & Pressure Vessels/Pressure Vessel

5 Items

Asset

Description

Condition

Location

Air Receiver Pressure Tank 200 Gallons

Asset ID: AF1

Manchester

Air receiver by Manchester Tank. Vertical on base. Size 28" dia x 55: s/s on base for 78" OAH. Capacity 200 gallons. ASME Nat'l Bd # 270535 MAWP 300 psi at 400F. Also CRN certified.

Condition

Location

Steam Flash Drum to atmospheric. Manufactured by Precision Pipe & Vessel in 2009. ASME rated...

Flash Tank Drum

Asset ID: 31-V-156

PPV Precision Pipe & Vessel

Steam Flash Drum to atmospheric. Manufactured by Precision Pipe & Vessel in 2009. ASME rated MAWP 150/FV T 250F. Material carbon steel. Note: This flash drum is stacked on top of 31-V-164. Part of Absorber & cleanup module FP311

Condition

Location

Horizontal carbon steel pressure vessel. Decanter and Liquid Knock Out. Built by Confab s/n...

Horizontal Decanting Vessel

Asset ID: V-1506

Confab

Horizontal carbon steel pressure vessel. Decanter and Liquid Knock Out. Built by Confab s/n 64866. ASME Nat'l Bd# 28, rated at 184 psig at 350F (1269 kpa at 177C). Approx size 6.5 ft dia x 18 ft long T/T for 4,468 gallon capacity. Weight: Approx. 12000-15000 lbs. Last used as Decanter in ethanol plant - see schematic link. Insulation has been removed. Tank has been removed and is ready for loading. - price includes loading

Condition

Good

Location

Steam drum manufactured by Precision Pipe & Vessel in 2009. ASME MAWP 150 psig/FV at 550F, Nat'l...

Steam Blowdown Drum

Asset ID: 41-V-630

PPV Precision Pipe & Vessel

Steam drum manufactured by Precision Pipe & Vessel in 2009. ASME MAWP 150 psig/FV at 550F, Nat'l Bd# 893, s/n CV-0893. Material is SA312-TP347. Physical size is 24"dia x 8'-6" s/s, OAH 11'-10" for capacity of 185 gallons. Used as a steam blowdown drum

Condition

Location

Steam drum by Nebraska Boiler, built 2009. Horizontal, ASME Nat'l Bd# 877, MAWP 800 psig/FV at...

Steam Drum

Asset ID: 41-V-180

Nebraska Boiler

Steam drum by Nebraska Boiler, built 2009. Horizontal, ASME Nat'l Bd# 877, MAWP 800 psig/FV at 350F, Stainless steel SA-312-304. Physical size 42" dia x 120" s/s x 0.5" shell (11'-3" OAL) for 107cf or 720 gallons. Used as Catalytic Converter steam drum. Part of Catalytic Converter module FP411

Condition

Location

Hydrasep Oil/Water Separator. Horizontal Hydrasep HS-1500-BD. Biodiesel laminar flow...

Tanks & Pressure Vessels/Separator

2 Items

Asset

Description

Condition

Location

Hydrasep Oil Water Separator

Asset ID: 2448

Hydrasep

Hydrasep Oil/Water Separator. Horizontal Hydrasep HS-1500-BD. Biodiesel laminar flow separators. The patented Hydrasep laminar flow separator is designed to continuously separate glycerin from methyl ester and wash water from methyl ester without any moving parts or coalescing media, eliminating the need for power consumption and periodic overhaul. Carbon steel construction, horizontal 48" dia x 18' OAL, On saddles and steel frame so OAH is approx 6 ft. Designed for 48 gpm flow rate. Inlet/Outlet 4". Volume 1,742 gallons, Operating volume 1,213 gallons, empty weight 4,670 pounds. Built 2008. Serial number 5000357. Removed and ready to load.

Condition

Location

Hydrasep Oil/Water Separator. Model HS-2000-BD. Biodiesel laminar flow separators. The...

Hydrasep Oil Water Separator

Asset ID: 2449

Hydrasep

Hydrasep Oil/Water Separator. Model HS-2000-BD. Biodiesel laminar flow separators. The patented Hydrasep® laminar flow separator is designed to continuously separate glycerin from methyl ester and wash water from methyl ester without any moving parts or coalescing media, eliminating the need for power consumption and periodic overhaul. Carbon steel construction, horizontal 54" dia x 20'-1" OAL, On steel frame. Designed for 69 gpm flow rate. Inlet/Outlet 4". Operating volume 1,752 gallons, empty weight 5,861 pounds. Serial # 5000361. Removed and ready to load.

Condition

Location

Fenix Horizontal Decanter Vessel SN 390295.08.15C Rev.00 Shell Design pressure 14.9 psig, Design...

Tanks & Pressure Vessels/Stainless

33 Items

Asset

Description

Condition

Location

Decanter, Horizontal 4200 gallons

Asset ID: V-411

Fenix

Fenix Horizontal Decanter Vessel SN 390295.08.15C Rev.00 Shell Design pressure 14.9 psig, Design temp 200F, Test pressure 19.37 psig, 4200 gallons. 7.88 feet x 11.9 feet

Condition

Location

Fenix Horizontal Decanter Vessel SN 390295.05.20C Rev.00 Shell Design pressure 14.9 psig, Design...

Decanter, Horizontal 4200 gallons

Asset ID: V-313

Fenix

Fenix Horizontal Decanter Vessel SN 390295.05.20C Rev.00 Shell Design pressure 14.9 psig, Design temp 200F, Test pressure 19.37 psig, Built 2014. 4200 gallons. 7.88 feet x 11.9 feet

Condition

Location

Fenix Vessel, 470 gallons capacity, 4 ft dia. x 90 inch OAH, 3/16 inch thick

Flash Tank 470 gallons

Asset ID: V-506

Fenix

Condition

Location

WALKER 1,200 GALLON STAINLESS STEEL VERTICAL MIX TANK, TOP ENTERING AGITATOR Dish bottom, open...

Mix Tank ss 1200 gallons

Asset ID: 2863

Walker

WALKER 1,200 GALLON STAINLESS STEEL VERTICAL MIX TANK, TOP ENTERING AGITATOR Dish bottom, open top with 3" NPT Outlet, Material stainless steel 304 with painted bridge for agitator. Stainless steel auger-style agitator with steady bearing and 5 HP gearmotor, and an internal perforated screen. Stainless steel legs with pad feet. Overall dimensions 84" dia x 122" tall. There are ten (10) tanks available immediately, priced separately. We can recondition these tanks to add a paddle type vertical top entering agotator and enclose top with ss hunged cover. Allow 12 weeks and additional cost

Condition

Mixer with screw ejection through bottom port. This unit is fully operation and has few hours on...

Location

Mixing Tank, 600 gallons

Asset ID: 2112

Vendome Copper & Brass Works

Mixer with screw ejection through bottom port. This unit is fully operation and has few hours on it. Excellent shape - ***Mixing Tank:*** Capacity 600 gallon Stainless Steel Extraction Mixing Tank. Material 304 stainless steel. . Manufactured by Vendome Copper & Brass. Tank dimensions: Overall total height: 124", Height of outlet: 50", Outlet size: 10.5" , Top Diameter: 64". Tank has ejection through bottom port and is fully functional. - ***Mixer and Ejector Screw:*** Stainless steel 304 mixing auger for bottom port ejection. Has 1 HP gearmotor for screw output of 3.15 rpm.

Condition

Allen Bradley stainless steel tank, capacity 500 gallons. ASME MAWP 5 psi at 250F. Approx size...

Location

Kentucky

Process Tank ss

Asset ID: V2259

Allen Bradley stainless steel tank, capacity 500 gallons. ASME MAWP 5 psi at 250F. Approx size 50" dia x 52" straight side with dish bottom/top. Legs 3 ft... Quantity (2) - priced separately

Condition

Location

Fenix tank, 1620 gallon capacity, 5.25 ft dia x 10 feet H, 390296.03.09 Rev 00. MAWP Shell 323...

Receiver Pressure Tank 1600 gallons

Asset ID: T-702

Fenix

Fenix tank, 1620 gallon capacity, 5.25 ft dia x 10 feet H, 390296.03.09 Rev 00. MAWP Shell 323 psi @ 482F. Last used as Biodiesel Reflux Tank

Condition

Location

Square stainless steel tank,reinforced sides. Size is 111" x 111" x 160" high - on legs for OAH...

Square Tank, ss 8500 gallons

Asset ID: 2048

Square stainless steel tank,reinforced sides. Size is 111" x 111" x 160" high - on legs for OAH 220". Atmospheric tank. Capacity approx 8500 gallons. Material ss304. Flat top, bottom has a slight taper to the center. Used for pure ethanol storage food grade. Part of an entire CBD extraction system - enter PK6020 to see all components.

Condition

Location

Fenix Hydrolysis Decanter Vessel SN 390295.06.12C Rev.00, 2800 gallon capacity, 8.25 ft x 7 ft H,...

Vertical Cone Bottom Tank 2800 gallons

Asset ID: V-213

Fenix

Fenix Hydrolysis Decanter Vessel SN 390295.06.12C Rev.00, 2800 gallon capacity, 8.25 ft x 7 ft H, Shell Design pressure 14.9 psig, Design temp 200F, Test pressure 19.37 psig

Condition

Location

Vertical Flash Vesel by Fenix, 48.4 inch diameter x 156.7 inches, Stainless Steel 304Last used as...

Vertical Flash Vessel

Asset ID: F-106

Fenix

Vertical Flash Vesel by Fenix, 48.4 inch diameter x 156.7 inches, Stainless Steel 304Last used as FD Dryer Flash Vessel

Condition

Location

Fenix Vertical Flash vessel 390295.02.21C Rev 02, Shell design pressure 14.9 @ 400F, 950 gallons,...

Vertical Flash Vessel

Asset ID: F-504

Fenix

Fenix Vertical Flash vessel 390295.02.21C Rev 02, Shell design pressure 14.9 @ 400F, 950 gallons, 4 ft dia x 16.83 Ft, SS

Condition

Location

Vertical stainless steel tank on legs. Flat top/slight cone bottom. Size approx 4 ft dia x 8 ft...

Vertical ss Tank

Asset ID: V2241

Vertical stainless steel tank on legs. Flat top/slight cone bottom. Size approx 4 ft dia x 8 ft tall on 15" legs. Approx capacity 750 gallons

Condition

Location

Vertical stainless steel tank, insulated, on legs. Approx size 30" dia x 55" tall s/s on 30"...

Vertical ss tank

Asset ID: V2246

Vertical stainless steel tank, insulated, on legs. Approx size 30" dia x 55" tall s/s on 30" legs. Capacity about 150 gallons. Qty (2) - priced separately.

Condition

Location

Vertical stainless steel tank on legs. Approx size 20 inch dia x 40 inch s/s on 1 ft legs for...

Vertical ss Tank

Asset ID: V2271

Vertical stainless steel tank on legs. Approx size 20 inch dia x 40 inch s/s on 1 ft legs for approx 50 gallon capacity

Condition

Location

Vertical stainless steel 304 tank, LIKE NEW - used a few times on water. Insulated, on 8" legs,...

Vertical ss Tank 404 gallon

Asset ID: V2235

Owin International

Vertical stainless steel 304 tank, LIKE NEW - used a few times on water. Insulated, on 8" legs, slight sloped bottom. Approx size 4 ft dia x 67 inches s/s. On skid for OAH of 78 inches. Capacity is 404 gallons. Atmospheric tank. Insulation 1 3/4" thick. Has one Trivolt electric heater band at middle, rated at 1000 watts and 120 volts (two 500 watt elements - see drawing) Two available ( priced separately ).

Condition

Location

Fenix Vertical Cylindrical Tank dish top-dish bottom. 390295.01.09C Rev 00, Shell design pressure...

Vertical Tank 1600 gallons

Asset ID: T-206A

Fenix

Fenix Vertical Cylindrical Tank dish top-dish bottom. 390295.01.09C Rev 00, Shell design pressure 14.9 @ 150F, 1600 gallons, 6 ft dia x 8 ft, SS

Condition

Location

Day Tank 6 ft x 8 ft S/S, 1600 gal, 6 ft x 8 ft S/S, Dish tip-dish bottom on legs. Shell 14.8...

Vertical Tank 1600 gallons

Asset ID: T-302

Fenix

Day Tank 6 ft x 8 ft S/S, 1600 gal, 6 ft x 8 ft S/S, Dish tip-dish bottom on legs. Shell 14.8 psi, Design temp 150F, S/N 390295.01.09C Rev 00

Condition

Location

Day Tank 6 ft x 8 ft S/S, 1600 gal, Shell 14.8 psi, Dish top-dish bottom, on legs. Design temp 150F

Vertical Tank 1600 gallons

Asset ID: T-306

Fenix

Condition

Location

Day Tank 6 ft x 8 ft S/S, 1600 gal, Dish top-dish bottom on legs. Shell 14.8 psi, Design temp 150F

Vertical Tank 1600 gallons

Asset ID: T-401A

Fenix

Condition

Location

Day Tank 6 ft x 8 ft S/S, 1600 gal, Dish top-dish bottom, on legs. Shell 14.8 psi, Design temp 150F

Vertical Tank 1600 gallons

Asset ID: T-501

Fenix

Condition

Location

Vertical tank dish top-dish bottom, on legs. Vessel with Elloip 2:1 Heads, 1850 gallon capacity,...

Vertical Tank 1850 gallons

Asset ID: V-110

Fenix

Vertical tank dish top-dish bottom, on legs. Vessel with Elloip 2:1 Heads, 1850 gallon capacity, 6 ft x 8.75 feet, Shell 14.9 design pressure, 400F design temperature, SN 390295.03.14C Rev 00

Condition

Location

Hydrolysis Relief Vessel by Fenix process technologies S/N 390295.08.15C Rev00, 215 gal, 3.5 ft x...

Vertical Tank 215 gallons

Asset ID: V-212

Fenix

Hydrolysis Relief Vessel by Fenix process technologies S/N 390295.08.15C Rev00, 215 gal, 3.5 ft x 3 ft. S/S, Shell 14.9 psi, Design temp 700F

Condition

Location

Fenix Process Technologies 390295.08.15C Rev 00, Stainless Steel Vessel, 215 gallon capacity, 3.5...

Vertical Tank 215 gallons

Asset ID: V-312

Fenix

Fenix Process Technologies 390295.08.15C Rev 00, Stainless Steel Vessel, 215 gallon capacity, 3.5 ft O.D. x 3 ft H, 14.9 psig @ 700F

Condition

Location

Fenix Process Technologies Stainless Steel Vessel, 215 gallon capacity, 3.5 ft O.D. x 3 ft H

Vertical Tank 215 gallons

Asset ID: V-410

Fenix

Condition

Location

Vertical stainless steel tanks on legs. Approx size 30" dia x 33" s/s on 12" legs. Capacity...

Vertical Tank ss

Asset ID: V2237

Vertical stainless steel tanks on legs. Approx size 30" dia x 33" s/s on 12" legs. Capacity approx 100 gallons. Quantity (2) - priced separately

Condition

Location

Stainless steel vertical tanks, capacity 100 gallon. Formerly Lot 135. Quantity (2) priced...

Vertical Tank ss

Asset ID: V2247

Stainless steel vertical tanks, capacity 100 gallon. Formerly Lot 135. Quantity (2) priced separately

Condition

Location

Vertical stainless steel tank, insulated. Size 30.5" dia x 45" tall on legs for 76" OAH. ...

Vertical Tank, ss 145 gallons

Asset ID: 2050

Vertical stainless steel tank, insulated. Size 30.5" dia x 45" tall on legs for 76" OAH. Capacity 145 gallons. Pk6020

Condition

Location

Stainless steel ss304 vertical tank. Size 52.5" dia x 70.5" tall. Flat top, slight cone bottom....

Vertical Tank, ss 600 gallons

Asset ID: 2062

Stainless steel ss304 vertical tank. Size 52.5" dia x 70.5" tall. Flat top, slight cone bottom. Capacity 600 gallons. Has short legs 6". Pk6020

Condition

Location

Stainless steel vertical tank - size 50" dia x 84" tall on legs for 117" OAH. Capavcity 580...

Vertical Tank, ss cone bottom 580 gal

Asset ID: 2061

Stainless steel vertical tank - size 50" dia x 84" tall on legs for 117" OAH. Capavcity 580 gallons. Flat top, Cone bottom approx 45 degrees. On legs. Pk6020

Condition

Location

Vertical stainless steel singe wall tanks on legs, slight cone bottom. Approx size 40" dia x 6...

Vertical Tanks ss

Asset ID: V2258

Vertical stainless steel singe wall tanks on legs, slight cone bottom. Approx size 40" dia x 6 ft tall on 15" legs for capacity of about 400 gallons. Note that these tanks are the taller ones in the photos. Quantity (4) - priced separately

Condition

Location

Vertical stainless steel tank, flat bottom/top. Approx size 8 ft dia x 15 ft tall. Capacity about...

Vertical Tanks ss 5500 gallons

Asset ID: V2264

Precision Tank

Vertical stainless steel tank, flat bottom/top. Approx size 8 ft dia x 15 ft tall. Capacity about 5500 gallons. UL certification MH8350, serial 136575. T-007

Condition

Location

Vertical stainless steel tanks on legs.ew - old stock. Never used. Approx size 40" dia x 6 ft...

Vertical Tanks ss NEW 400 gallns

Asset ID: V2256

Vertical stainless steel tanks on legs.ew - old stock. Never used. Approx size 40" dia x 6 ft tall s/s on 15 inch legs. Capacity approx 400 gallons. Flat top, slight cone bottom. Qty (6), priced separately

Condition

Location

Vertical stainless steel tanks on legs, NEW. insulated with (2) electric heater bands. Approx...

Vertical Tanks ss NEW 550 gallons

Asset ID: V2257

Owin International

Vertical stainless steel tanks on legs, NEW. insulated with (2) electric heater bands. Approx size 48" dia x 92 inches tall s/s on 15" legs. Bottom slight cone. Capacity approx 550 gallons. Atmospheric tank. Insulation 1 3/4" thick. Has 2 bands on tank Trivolt electric heater band each band rated at 1000 watts and 120 volts. See drawings. Quantity (2) tanks - priced separately

Condition

Location