Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
Assets Matching with 'carter day' in any Field
27 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Ozone Generator 333 Lbs/Day
Asset ID: M2006
Available: 3
### ABB Ozone Generator System Type OF 209 L - Quantity (3) available ###
Stainless steel Ozone Generator Vessel (OGV) and Power Supply Unit (PSU).
**Performance**
- Rated for 333 pounds per day ozone.
- 17 psi ozone gas pressure.
- 13,320 pounds per day corresponding mass flow.
- 84 gallons per minute flow.
- 8.5 kWh per pound power consumption.
** Features **:
- OGV: Flanged dished ends with ozone-resistant gaskets, stainless steel (earth) electrodes, and metallized glass (high voltage) electrodes.
- PSU: Main switch, main breaker, current rectifier controller, DC-choke, current inverter, high voltage transformer, and Programmable Logic Control (PLC) system.
PSU can be controlled manually or by remote set point. System in good working condition when removed from service
3 Units Available - Priced Separately
Asset ID: M2006
Available: 3
Ozone Generator 333 Lbs/Day
### ABB Ozone Generator System Type OF 209 L - Quantity (3) available ### Stainless steel Ozone Generator Vessel (OGV) and Power Supply Unit (PSU). **Performance** - Rated for 333 pounds per day ozone. - 17 psi ozone gas pressure. - 13,320 pounds per day corresponding mass flow....
Flash Drum
Asset ID: 31-V-164
Available: 1
Flash drum, Manufactured by Precision Pipe & Vessel in 2009 - ran 42 days only - like new. Physical size 72" dia x 11'-6" . Has demister pad at top of vessel. Has a 5'-6" skirt on bottom and a 4 ft top skirt for OAH of20'-8" tall. Inlet 4", vapor outlet 1-1/2", liquid outlet 4". ASME rated MAWP 200/FV at 250F. Nat'l Bd# 879, s/n CV-0884. Material: carbon steel SA-516-70 with 2" insulation and ss covering. Note: Photos show both the flash drums stacked on top of each other. Part of module fp311. Used as Flash Drum, High Pressure
Asset ID: 31-V-164
Available: 1
Flash Drum
Flash drum, Manufactured by Precision Pipe & Vessel in 2009 - ran 42 days only - like new. Physical size 72" dia x 11'-6" . Has demister pad at top of vessel. Has a 5'-6" skirt on bottom and a 4 ft top skirt for OAH of20'-8" tall. Inlet 4", vapor outlet 1-1/2", liquid outlet 4"....
Catalytic Converter Reactor
Asset ID: 41-R-168
Available: 1
Catalyst Converter designed for 3.9 MMBTU/hr. Design specifications are for 14,500 gallons/day crude methanol or 12,500 gal/day mixed alcohols. Mfg by Wagner Plate Works in 2009. Size approx 7 ft dia ID x 19'-11" s/s x 31 ft overall height for approximately 7,600 gallons capacity - tube bed approx 17 ft long. Has 1,028 x 1.9" O.D. tubes Sch 80 stainless steel TP304L, shell cs 516-70 4 inch thick. ASME Nat'l Bd# 55, MAWP shell 2250 psig/FV at 650 F. MAWP tubes 1650 psig at 650F. Converter currently loaded with approx 150 cu ft methanol catalyst - Sud Chemie MegaMax 700. Still installed - price does not include removal. Shipping size will be about 12 ft x 12 ft x 35 ft long. Note: we have the complete reactor module as well with all pieces shown in photos plus instruments - see asset ID FP411.
Asset ID: 41-R-168
Available: 1
Catalytic Converter Reactor
Catalyst Converter designed for 3.9 MMBTU/hr. Design specifications are for 14,500 gallons/day crude methanol or 12,500 gal/day mixed alcohols. Mfg by Wagner Plate Works in 2009....
Heat Exchanger, Shell & Tube 135 sf
Asset ID: 31-E-236
Available: 1
Shell & tube heat exchanger, Surface area 135 sq ft, physical size 10 in dia x 8.5 ft long. Designed for 1.44 MMBTU/hr, operating pressure 80 psig. Shell side Steam 324psi/307F, tube side HP Solvent 102psi/125F. ASME rated at shell 150 psi at 400F, tube 200 psi at 250F. TEMA Design NEN. Has 81 tubes 3/4" 14 gage tubing, 0.75/0.083, empty weight 1913 #. Manufactured by Precision Pipe & Vessel in 2009 - ran only 42 days - like new. Material: shell is seamless pipe carbon steel SA-106 grade B, tubes are carbon steel 14 gage. We have drawing in Links. Used as High Pressure Liquid Heater on fp311. Still installed - allow 2-3 weeks for removal and loading.
Asset ID: 31-E-236
Available: 1
Heat Exchanger, Shell & Tube 135 sf
Shell & tube heat exchanger, Surface area 135 sq ft, physical size 10 in dia x 8.5 ft long. Designed for 1.44 MMBTU/hr, operating pressure 80 psig. Shell side Steam 324psi/307F, tube side HP Solvent 102psi/125F. ASME rated at shell 150 psi at 400F, tube 200 psi at 250F. TEMA Design NEN....
Vertical Tank 1600 gallons
Asset ID: T-302
Available: 1
Day Tank 6 ft x 8 ft S/S, 1600 gal, 6 ft x 8 ft S/S, Dish tip-dish bottom on legs. Shell 14.8 psi, Design temp 150F, S/N 390295.01.09C Rev 00
Asset ID: T-302
Available: 1
Vertical Tank 1600 gallons
Day Tank 6 ft x 8 ft S/S, 1600 gal, 6 ft x 8 ft S/S, Dish tip-dish bottom on legs. Shell 14.8 psi, Design temp 150F, S/N 390295.01.09C Rev 00
Bleacher - 150 TPD Stainless
Asset ID: 5718
Available: 1
DeSmet stainless steel vacuum bleacher for continuous bleaching. Total capacity is 150 tons per day. Size 5' diameter with 3.5" insulation, 14' tall. Demister pad section 4' diameter x 5' tall. OAH 19 feet. Includes 2 Krohne stainless steel mechanical flowmeters, one 1" and one 2". Includes additional side mounted small vessel and RTD for level control. Small vessel dimensions 1' diameter x 8' tall with 2" inlet. Includes 2 Masoneilan stainless steel 2" pneumatic control valves. Vacuum unit not available. Includes operators manual. Idled 2014. We have quoted removed and loaded but removal is an estimate. If serious, we can get a quote.
Asset ID: 5718
Available: 1
Bleacher - 150 TPD Stainless
DeSmet stainless steel vacuum bleacher for continuous bleaching. Total capacity is 150 tons per day. Size 5' diameter with 3.5" insulation, 14' tall. Demister pad section 4' diameter x 5' tall. OAH 19 feet. Includes 2 Krohne stainless steel mechanical flowmeters, one 1" and one 2"....
Heat Exchanger, Shell & Tube 2151sf
Asset ID: 41-E-112
Available: 1
Heat exchanger shell & tube TEMA AEU design. U-tube type, Heat transfer area 2151 sq ft, ASME MAWP tubes 1650 psig/FV at 385F, shell 150 psig at 250F. Nat'l Bd # 2932, serial# 4017C. Rated for 98 MMBTU/hr, Water 90/110F, Reactor Effluent 300/105F. Material 304L stainless steel tubes/CS shell. There are 325 tubes sized 5/8" OD with 0.065" wall, Physical size 25" dia x 20 ft. Manufactured by Heat Exchanger Design (HED) in 2009. Physical weight 16,620 pounds. Ran 42 days - like new. We have U-1A - see Links. (Part of module fp413)
Asset ID: 41-E-112
Available: 1
Heat Exchanger, Shell & Tube 2151sf
Heat exchanger shell & tube TEMA AEU design. U-tube type, Heat transfer area 2151 sq ft, ASME MAWP tubes 1650 psig/FV at 385F, shell 150 psig at 250F. Nat'l Bd # 2932, serial# 4017C. Rated for 98 MMBTU/hr, Water 90/110F, Reactor Effluent 300/105F. Material 304L stainless steel tubes/CS shell....
Grain Milling Plant
Asset ID: PK-5106
Available: 1
## Grain Milling Plant ##
Agrex grain milling plant rated at 125 bu/hr (85 tons/day). Capabilities: Corn, Wheat, Barley, Oats, Rye, Soybeans, Grain Sorghum - was milling corn for an ethanol plant. Plant is fully automated using Allen Bradley PanelView Plus 1250 controls, 480v 3/60. Built in 2008 and ran through mid 2010 then idled. This plant occupies an area approx 55 ft x 22.5 ft and tallest piece (hopper) is 15 ft. Sold as a complete milling system. For more information and photos of the components, ask for an invitation to the Virtual Data Room (VDR).
## ***Very Good Condition. Ran less than 1000 hours - Fully Automated*** ##
Equipment is removed, loaded into two 53 foot van trailers, ready for you to hook on to. Trailers included in the sale
**Major Equipment** --> See Equipment List in Documents
- Loading hopper
- Grain seed cleaner sieve
- Destoner
- Degerminator
- Classifier
- Blender
- Byproduct collecting beam and filter
- Rolling mills
- Purifier and filter
- Grits and flour transport line
- Pneumatic clamp tissue tightener
**Operation**
- Very low hours: Less than 1000 hours. (Paint is still on the augers)
- Built 2008, ran through mid 2010
- Briefly started again in 2013/2014 but never was operational - idled again
- Started again in 2022 to check out operation. Ran some corn to verify good working condition
- No major issues known
Asset ID: PK-5106
Available: 1
Grain Milling Plant
## Grain Milling Plant ## Agrex grain milling plant rated at 125 bu/hr (85 tons/day). Capabilities: Corn, Wheat, Barley, Oats, Rye, Soybeans, Grain Sorghum - was milling corn for an ethanol plant. Plant is fully automated using Allen Bradley PanelView Plus 1250 controls, 480v 3/60....
Flaking Mill
Asset ID: S3155
Available: 1
Roskamp flaking mill SP2800-62 with 150HP motor, rated at 330 tons/day. Has 28 inch diameter centrifugally cast chilled iron rolls. See brochure in Links. Removed and ready to load, price includes loading onto flatbed truck.
Asset ID: S3155
Available: 1
Flaking Mill
Roskamp flaking mill SP2800-62 with 150HP motor, rated at 330 tons/day. Has 28 inch diameter centrifugally cast chilled iron rolls. See brochure in Links. Removed and ready to load, price includes loading onto flatbed truck.
Dehumidifier
Asset ID: V2210A
Available: 1
Frigidaire dehumidifier 70 pints per day capacity. Air flow 165-194 cfm, noise level 53.4 dB. Power 115v, 690 watts
Asset ID: V2210A
Available: 1
Dehumidifier
Frigidaire dehumidifier 70 pints per day capacity. Air flow 165-194 cfm, noise level 53.4 dB. Power 115v, 690 watts
Hydrogen PSA System 1.3 MMSCFD
Asset ID: 7251
Available: 1
### PSA System (pressure swing adsorption) ###
**New, Never Installed**
* Built by Honeywell UOP in 2023 - New, never installed.
* Rated at 1.3 MMSCFD (million standard cubic feet per day). OUTPUT 1,534 Nm3/Hr. INPUT 2.05 MM SCFD
* PSA adsorber vessels rated at 235 psig at 34F / 168F. There are 5 PSA Vessels
* Plant footprint is 50 ft x 17 ft.
* Allen Bradley 1756 PLC control system.
* Two years of operation spare parts available.
* Unused Adsorbent available.
Hydrogen PSA system uses Honeywell UOP Polybed process to generate 99.99% hydrogen from feed gas (2.05 MMSCFD, 209.3psig at 100F, containing 75% of hydrogen) through 5-bed pressure swing absorption vessels.Hydrogen recovery rate from feed gas is 84.5%.
**Technical Specs and Drawings on Request**
Asset ID: 7251
Available: 1
Hydrogen PSA System 1.3 MMSCFD
### PSA System (pressure swing adsorption) ### **New, Never Installed** * Built by Honeywell UOP in 2023 - New, never installed. * Rated at 1.3 MMSCFD (million standard cubic feet per day). OUTPUT 1,534 Nm3/Hr. INPUT 2.05 MM SCFD * PSA adsorber vessels rated at 235 psig at 34F / 168F....
Screw Press, Sprout Bauer 100 tpd
Asset ID: B2107
Available: 3
Screw Press dewatering press by Andritz Sprout-Bauer Model 575. Main drive Siemens 75 HP motor 460/360 at 1780 rpm. With Falk gear reducer. Capacity approximately 100 short tons per day (tpd) depending on feed stock. Last used for pressing corn germ. See drawing in Links for details. Qty (3) presses - priced separately
Asset ID: B2107
Available: 3
Screw Press, Sprout Bauer 100 tpd
Screw Press dewatering press by Andritz Sprout-Bauer Model 575. Main drive Siemens 75 HP motor 460/360 at 1780 rpm. With Falk gear reducer. Capacity approximately 100 short tons per day (tpd) depending on feed stock. Last used for pressing corn germ. See drawing in Links for details....
JWI J-Press Filter Press 3075 sq ft
Asset ID: 1088
Available: 1
### JWI J-Press 1500 mm ###
Evoqua Water Technologies (now part of Xylem) 1500 mm J-Press. Model #1500N32-76-150SYLC. Filter area 3075 sq ft. 76 plates. Cake thickness 32 mm, Capacity 150 cu ft. Low Operating Hours. Less than 60 days in operation.
The J-Press filter press is one of the most versatile dewatering devices on the market, being used in a wide variety of industrial and municipal applications. The J-Press filter press can be used to recover both solids and liquids from a waste or process stream. With superior materials of construction, the J-Press filter press is especially useful in the dewatering of aggressive acid and alkali suspensions.
Asset ID: 1088
Available: 1
JWI J-Press Filter Press 3075 sq ft
### JWI J-Press 1500 mm ### Evoqua Water Technologies (now part of Xylem) 1500 mm J-Press. Model #1500N32-76-150SYLC. Filter area 3075 sq ft. 76 plates. Cake thickness 32 mm, Capacity 150 cu ft. Low Operating Hours. Less than 60 days in operation....
Biomass Bale Handling & Grinder System
Asset ID: 1710
Available: 1
### Biomass Bale Handling System ###
- 4 infeed processing lines for bulk bale handling and grinder plus silo and baghouse
- Bale size was 3' x 4' x 8' long - processed in modules of 6 (2 bales wide x 3 bales high.
- Capacity 465 tons/day x 4 lines - 1,860 TPD.
Each line can hold 2 trucks worth of bales prior to the singulator (150 tons total (288 bales). Each line includes automatic singulation, de-stringing, coarse chop of bales, hydraulic power pack, and then grinders. The silo collects "fines" from the operation for disposal. This system fed an ethanol plant, and a biomass boiler/cogeneration system. Ideal for both. Grind size was <1” but screens can be changed to modify grind size. The biomass handling equipment would work perfectly in preparing biomass for a pelleting operation, or for burning in a biomass boiler from the included silo. Or this could be entirely repurposed to your need. Built 2013 - in very good condition. The general layouts and general description of this equipment are attached as links for more detailed information.
This system has been removed except for the silo/baghouse system.
- See links for drawings and description.
- See video of system in links - biomass system starts at 0:57 second mark.
Asset ID: 1710
Available: 1
Biomass Bale Handling & Grinder System
### Biomass Bale Handling System ### - 4 infeed processing lines for bulk bale handling and grinder plus silo and baghouse - Bale size was 3' x 4' x 8' long - processed in modules of 6 (2 bales wide x 3 bales high. - Capacity 465 tons/day x 4 lines - 1,860 TPD....
Oil Extraction System, Butane 1 TPD
Asset ID: PK-6030
Available: 1
### Hydrocarbon Butane Natural Oil Extraction System ###
Rated at approximately 1 TPD (ton per day). Last used to extract CBD, can be used for essential oils. Complete continuous system. Installed NEW in 2020 and idled in 2021. It ran only 5 to 6 batches - very few hours.
- Batch Process designed for 1000 lbs of hemp per run lasting 6 to 8 hours.
- (3) butane process pressure tanks 420 gallon horizontal insulated. ASME MAWP 250 psig at 100F with water jacket MAWP 15 psig.
- Chiller 10 tonR. Temtek BCD-10A air cooled water chiller. Motor 10 HP, refrigerant R-410A
- Alfa Laval plate heat exchanger 84 sf, model M6-Base
- Shell and tube heat exchanger Alleghany Bradford, MAWP shell/tube rated at 150 psig at 350F
- Rosedale ss cartridge filter, model SAN830
- Delta T Systems glycol cooling controls, Model EUW-36E. Heater 36 kw, pump 1.5 HP 230v 3/60
- (2) stainless steel jacketed tanks, Lee Tank 40 gallon capacity. MAWP tank 45 psig at 350F, Jacket 100 psi at 350F. Full vacuum vessel internal.
- Transformer 75 kva MGM. 3-phase 480v to 240v/120 CT
- Process pump, piping
- Most equipment is Like New - Purchased new in 2020. See equipment list
We have many photos of this system. Please ask for an invitation to our VDR (Virtual Data Room) to view.
Asset ID: PK-6030
Available: 1
Oil Extraction System, Butane 1 TPD
### Hydrocarbon Butane Natural Oil Extraction System ### Rated at approximately 1 TPD (ton per day). Last used to extract CBD, can be used for essential oils. Complete continuous system. Installed NEW in 2020 and idled in 2021. It ran only 5 to 6 batches - very few hours....
Filter
Asset ID: 31-FL-244
Available: 1
Vertical single stage filter, 10 micron, carbon steel, 3" pipe in/out top entry. Designed for 101,940 #/hr (205 gpm) solvent with 0.2 PPMW solids, 5 PSID. MAWP 450 psi/FV @350F, Nat'l Bd# 6166, s/n 6171. Used as solvent filter - like new. Mfg by TM Industrial in 2009, used 42 days.
Asset ID: 31-FL-244
Available: 1
Filter
Vertical single stage filter, 10 micron, carbon steel, 3" pipe in/out top entry. Designed for 101,940 #/hr (205 gpm) solvent with 0.2 PPMW solids, 5 PSID. MAWP 450 psi/FV @350F, Nat'l Bd# 6166, s/n 6171. Used as solvent filter - like new. Mfg by TM Industrial in 2009, used 42 days.
Hydrogen PSA System 750K scfd
Asset ID: PK-5103
Available: 1
## PSA system (pressure swing adsorption) ##
- Built by Hydrochem in 1998 - never put in service.
- Rated at 750,000 scfd (standard cubic feet per day) = 30,000 scfh.
- This is an 8-bed design using Valteck valves.
- Vessels all are ASME pressure vessels MAWP 270 psig at 150F.
- Includes Dresser Rand hydrogen compressor on skid - discharge pressure 400 psig - MAWP 440 psig. See all nameplate details transcribed in photo. Compressor cylinder type VIP, nominal bore 12.5 inch, 1250 rpm, serial number 3VC200
Capable of purifying the gaseous composition of H2, CO2, CO, CH4, Ethane and Propane depending on the Mole% of each as long as there is NO Moisture/Condensate in those feed streams. This system can purify H2 better than 99.9%
Adsorbents not included (we can furnish information on what the adsorbents were. This unit is now in warehouse storage ready to load
Asset ID: PK-5103
Available: 1
Hydrogen PSA System 750K scfd
## PSA system (pressure swing adsorption) ## - Built by Hydrochem in 1998 - never put in service. - Rated at 750,000 scfd (standard cubic feet per day) = 30,000 scfh. - This is an 8-bed design using Valteck valves. - Vessels all are ASME pressure vessels MAWP 270 psig at 150F....
COP Tanks & Systems
Asset ID: 1975
Available: 20
Clean Out of Place (C.O.P.) tanks - .All stainless steel 304. These are all new tanks. The quote offered is for ONE tank in this configuration shown but we offer 4 different sizes and configurations.
COP tank length 10 ft x width 24 " x depth 22 ". Overall height 40 ". Internal spray manifolds and external spray manifolds. Solution pump: 5 HP 3,500 rpm 230v 3/60. Includes (4) 6" caster wheels. See tank drawing in Document Link.
- For 6 foot long COP tank subtract $1,500 from quotation
- For 8 foot long COP tank subtract $600 from quotation
- For 12 foot long COP tank, add $1,350 to quotation
- Note: a pipe draining rack can be provided, we can furnish COP tanks with or without recirculating pump
The above outlined Clean Out of Place (C.O.P.) Tanks may be available for shipment, from the manufacturer’s factory (China) in an estimated 60 days from date of receipt of an order. Shipping time from the manufacturer’s factory to a California Port of Disembarkation is currently erratic; however, believed to be 21-25 days.
Terms of Payment:
Fifty Percent (50%) deposit with your order
Fifty Percent (50%) balance when ready for shipment
Asset ID: 1975
Available: 20
COP Tanks & Systems
Clean Out of Place (C.O.P.) tanks - .All stainless steel 304. These are all new tanks. The quote offered is for ONE tank in this configuration shown but we offer 4 different sizes and configurations. COP tank length 10 ft x width 24 " x depth 22 ". Overall height 40 "....
Cracking Mill
Asset ID: S3164
Available: 1
Ferrell Ross double stack cracking mill 12x52. Cracker is rated at 825 tons/day. Unit has been remoived - ready for loading.Price includes loading oin a flatbed.
Asset ID: S3164
Available: 1
Cracking Mill
Ferrell Ross double stack cracking mill 12x52. Cracker is rated at 825 tons/day. Unit has been remoived - ready for loading.Price includes loading oin a flatbed.
Vertical Tank 1600 gallons
Asset ID: T-501
Available: 1
Day Tank 6 ft x 8 ft S/S, 1600 gal, Dish top-dish bottom, on legs. Shell 14.8 psi, Design temp 150F
Asset ID: T-501
Available: 1
Vertical Tank 1600 gallons
Day Tank 6 ft x 8 ft S/S, 1600 gal, Dish top-dish bottom, on legs. Shell 14.8 psi, Design temp 150F
BioRefinery Plant 550 TPD
Asset ID: PK-2600
Available: 1
### Bio Oil Refining Plant 550 TPD - OR - Biodiesel Plant 50 MGY ###
## On Mississippi River with Dock ##
- This plant has been recently idled - essential personnel are still there.
- Land is on the Mississippi River with dock and 2.6 million gallons of storage.
- Great for storage or transloading facility, for a renewable diesel feed plant, or other process/biodiesel plant with good infrastructure.
Originally it was a biodiesel plant and then added capability for soybean refining and enzymatic degumming. Mainly automatic with plc controls. Plant is currently idle but Plant Manager, Lead Operator, and Logistics Manager are still there maintaining the equipment including turning large motors. Electricity still on and most permits are current. Data room available upon request after signed NDA. SEE Marketing Deck in Links below.
***Includes***
- 2.6 million gallons of tank storage (62,000 bbl)
- Barge dock on Mississippi River
- Automatic with PLC controls
- Full Lab
- 53 acres of land
- Rail access (CN)
***Overview***
- This plant started transesterification biodiesel production 2007 with a name plate capacity of 72 million gallons per year and demonstrated production of 50 million gallons per year. Feedstock was solely Crude Degummed soybean oil, and finished product met or exceeded ASTM D6751.
- In 2022 the plant was converted to refine soybean oil from crude or crude degummed soybean oil. The refining process was designed for 144,000 gallons per day (100 gpm) (550 TPD). The operation was limited by feedstock supply chain so the max demonstrated production was 86,000 gallons per day. Refined soy oil processed was sold to Renewable Diesel producers, The refined oil met or exceeded all parties' required specifications. The actual COA’s are in the virtual data room
- In August 2023, production ceased and the plant was shut down. Critical operations team still in place.
Asset ID: PK-2600
Available: 1
BioRefinery Plant 550 TPD
### Bio Oil Refining Plant 550 TPD - OR - Biodiesel Plant 50 MGY ### ## On Mississippi River with Dock ## - This plant has been recently idled - essential personnel are still there. - Land is on the Mississippi River with dock and 2.6 million gallons of storage....
Fischer-Tropsch Reactors
Asset ID: B-1012
Available: 4
## Velocys Fischer-Tropsch Reactors - NEW, Never Used ##
Capacity Design Rate at 175 bbl/day. New Reactors using Fischer-Tropsch technology.
- Velocys has a patented catalyst and microchannel reactor system that enables production of SAF and Renewable Diesel from a vast range of sources.
- Microchannel reactor provides a compact modular and scalable solution
- Catalysts enable high volumetric productivity, 6-10 times that of traditional FT technology
- System can achieve high per-pass and overall CO conversion and maximize throughput at same fresh syngas to reduce c.5% OPEX
Quantity (4) reactors - priced separately
Also available (6) charges of catalyst for these 4 reactors at an additional cost
Asset ID: B-1012
Available: 4
Fischer-Tropsch Reactors
## Velocys Fischer-Tropsch Reactors - NEW, Never Used ## Capacity Design Rate at 175 bbl/day. New Reactors using Fischer-Tropsch technology. - Velocys has a patented catalyst and microchannel reactor system that enables production of SAF and Renewable Diesel from a vast range of sources....
Ethanol Botanicals Extractor CUP15
Asset ID: 7894
Available: 1
## CUP 15 Extractor ##
The CUP15 is a small capacity system that uses alcohol to extract your target compounds from various botanical materials.
- Size 37" x 25" x 56", weight 1095 lbs.
- Batch size 8-14 lbs. plant material, avg run time 10-20 minutes
- Alcohol requirement is 12-15 gallons per run, Working temp range from -40C to +60C
- Liquid/vapor tight vessel with EPDM lid seal; 1 gallon jacket volume with 1/2" NPT male jacket ports;
- Industrial Hazardous Location (HazLoc) control panel; Touchscreen HMI; Dual emergency stop
- On stainless steel cart with rollers
The CUP-15 combines closed loop alcohol extraction with centrifugal technology, ensuring consistent and convenient results by a single operator. A touch screen HMI features a menu with various agitation and spin-dry cycles, each of which is programmable to the operator's specifications. With a runtime of only 10-20 minutes and a throughput of approximately 300 lbs. per 8-hour work day, this system will efficiently attain your processing goals.
**Applications**
- Botanical Oil Extraction: Hemp, cannabis, essential oils, plant extracts
- Pharmaceutical & Nutraceutical Processing
- Food & Beverage Industry: Flavor and fragrance extraction
- Cosmetic & Skincare Industry: Active ingredient extraction
- Chemical Solvent-Based Extraction Processes
**Compatible Products & Uses**
- Ethanol-Based Cannabis and Hemp Extraction
- CBD and THC Oil Production
- Essential Oil and Botanical Extract Processing
- Industrial-Grade Ethanol Extraction for Herbal and Plant-Based Ingredients
- Solvent Recovery and Purification for High-Purity Extracts
Asset ID: 7894
Available: 1
Ethanol Botanicals Extractor CUP15
## CUP 15 Extractor ## The CUP15 is a small capacity system that uses alcohol to extract your target compounds from various botanical materials. - Size 37" x 25" x 56", weight 1095 lbs. - Batch size 8-14 lbs....
Vertical Tank 1600 gallons
Asset ID: T-306
Available: 1
Day Tank 6 ft x 8 ft S/S, 1600 gal, Shell 14.8 psi, Dish top-dish bottom, on legs. Design temp 150F
Asset ID: T-306
Available: 1
Vertical Tank 1600 gallons
Day Tank 6 ft x 8 ft S/S, 1600 gal, Shell 14.8 psi, Dish top-dish bottom, on legs. Design temp 150F
Vertical Tank 1600 gallons
Asset ID: T-401A
Available: 1
Day Tank 6 ft x 8 ft S/S, 1600 gal, Dish top-dish bottom on legs. Shell 14.8 psi, Design temp 150F
Asset ID: T-401A
Available: 1
Vertical Tank 1600 gallons
Day Tank 6 ft x 8 ft S/S, 1600 gal, Dish top-dish bottom on legs. Shell 14.8 psi, Design temp 150F
Plug Screw Feeder
Asset ID: B-1011
Available: 1
### Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder ###
**These units are NEW old stock, never used**
Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48%
Design flow rate 530 dry tons per day soft wood chips (500 BDST/D); Max capacity 1000 BDST/D; Turndown rate 50%
**Valmet plug screw feeder**
- Fed by a pre-compression screw section, and 48" shredder at outlet
- 850 HP Siemens motor 1750 rpm 460v 3/60
- Gear Reducer ratio 25:1. Nominal speed 69 rpm, range 35-105 rpm
- Skid size approx 25 ft long x 7 ft wide x 4.6 ft tall. Total weight including motor 45,400 lb
- Inlet 35.83" x 25.79"
**Pre-compression screw**
- Materials of construction stainless steel 304L for all contact parts
- Sits on top of plug screw at 90 degrees with s 24" diameter- top force feed
- Capacity Volume/Revolution inlet/discharge: 45 L / 22.5 L. Capacity / revolution at 110 kg/m3 = 5.46 BDST/D and net max capacity at 110 kg/m3 = 530 BDST/D
- 250 HP motor 1750 rpm 460v 3/60 v-belt drive to gear reducer V-belt reduction 1:52
- Gear reducer SEW Eurodrive ratio 18:1. Final rpm nominal speed 65 rpm, range 45-97 rpm
- Overall size approx 15.2 ft long x 7 ft wide x 5.8 ft tall, weight 17,300 lb
- Outlet: 35.83" x 25.79"
**T-Pipe 48" Shredder**
- Fed from plug screw feeder 24" biomass inlet
- MAWP 350 psig at 800F
- 100 HP motor 1750 rpm 460v 3/60
- Gear reducer 8.9:1 for nominal 197 rpm
- Shredder size approx 5 ft x 10.6 ft x 9.3 ft tall, weight 23,650 lb
- Outlet 24" flange 600#
**Condition** - These units are sealed against weather, protected, and in long term storage inside a third party protected warehouse. No known refurbishment required - assets are sold As Is Where Is.
Asset ID: B-1011
Available: 1
Plug Screw Feeder
### Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder ### **These units are NEW old stock, never used** Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48% Design flow rate 530 dry tons per day soft wood chips (500 BDST/D); Max capacity 1000 BDST....
Heat Exchanger, Shell & Tube 5861 sf
Asset ID: 31-E-188
Available: 1
Shell & tube heat exchanger, Heat transfer area 5,861 sq ft, Physical size 38" dia X 28 ft long. Material shell KCS (killed carbon steel)/ tubes carbon steel SA179. Rated at 450 psig 4.02 MMBTU/hr, HP Solvent 36/102, Lean Solvent 121/46F. TEMA type BFU, 2-pass shell side, 2-pass tube side. Manufactured by Heat Exchanger Design in 2009 - ran only 42 days - like new. ASME MAWP 450/FV at 350F, Nat'l Bd# 2891, s/n 4015. Has (611) 3/4" tubes. We have drawings and U-1A - see Links. Used as Solvent / High Pressure Liquid Exchanger on fp311.