Solutions 4 Manufacturing

Bag Filter

Asset ID: BDFB-001

Available: 1

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81739 FSPN-1100 #4 C/S

Bag Filter

Asset ID: BDFB-002

Available: 1

Bag Filter - Pall Filter Specialists 150 psi @ 500F MAWP, MDMT <20F @150 psi S/N 81728 FSPN-355 #4 C/S

Vertical Leaf Filter

Asset ID: VLF-113

Available: 1

Vertical Leaf Filter 3.58 feet x 7.5 feet, 560 capacity, Model VLD-160-9, S/N 25133, 90 psig

Baghouse Filter Silo 4300 sf

Asset ID: cp101

Available: 1

Baghouse Filter, used. Kice model CR288-12 built 2006. Has 288 filter bags with cages - bag size 4-3/4" x 144" long. (Approx 4300 sf surface area). Baghouse size 12 ft dia. X 38 ft tall with 60 degree cone, partially insulated. On steel structure 14 ft x 14 ft x 9 ft tall. OAH approx. 45 ft tall. Carbon steel. With 3 ft screw conveyor at outlet. We have blower fan that went on this system - avaiable for extra cost - see asset cp102. NOTE: Baghouse system has been removed - stored at crane yard near Winnebago, MN. The optional Kice 60 HP blower system and ss stack (25,000 scfm) is in separate location (Marissa, IL). Baghouse filter shipping details: 13'-11" x 13'-10" x 44'-10 1/8 OAH, weight empty 30,500 pounds - allow 35,000 pounds. See links for baghouse filter drawing. We also have operating manual and wiring diagram + erection tips from Kice. Price quote for baghouse silo only.

Baghouse Dust Collector 62sf

Asset ID: 8121

Available: 1

### MAC Baghouse Dust Collector - very low hours ### MAC Baghouse dust collector. Model 54ST9. Serial # 161448-006-1. Used only for about a week for a research project - idled outside. - Mounted on structural frame with MAC MD20 airlock and 0.75 HP motor. - Filter includes (9) 16 oz polyester-dacron bags w/ ground wire and galvanized cages providing 62 sq ft surface. Bags change from clean air side. - Air to dust ratio of 4:1 at 250 cfm. - Baghouse dimensions 24" x 24" x 6 ft tall - Interior contact areas coated with epoxy - See drawing in Links Type ST dust collectors utilize bag media. A Mac baghouse type ST is a square baghouse-type dust collector that uses fabric filters to remove dust, particulates, and pollution from the air. (Square Top-Removal) - top removal. The filter media is installed and removed through the clean air plenum of the filter. Has a hinged top door to allow clean air access to the filter media

Bag Filter ss with platform

Asset ID: 2101

Available: 1

Stainless Steel Bag Filter with platform, Model # BG1122FHJSS, year built 2003. Uses #2 bags x 30". Certified by ESS Corp. MAWP 800 gpm maximum flow rate /150 psi at 200 Fahrenheit. Serial # 2046, Includes platform and handrail shown in photos - size approx 3 ft x 4 ft.

Bag Filters 4" ss

Asset ID: 8817

Available: 4

### Bag Filter NEW 4-Bag with 4" Connections ### NEW Bag Filter 4" inlet / outlet. Manufactured by PRM Filtration. Model BFHBFM4SSXV2. Rated 150 psig / 525 gpm. Uses (4) #2 size filter bags (7-1/16" dia x 32" L). Easy open top with toggle bolts and handwheel.. In stock - ships immediately, subject to prior sale. Price includes shipping and delivery to areas of the US from the middle to Eastern US. Delivery to West of that will be slightly more. Qty (4) available ( priced separately )

Multi Bag Filter System 1200 gpm

Asset ID: 8829

Available: 1

### Multi Bag Filter Housing System ### New - never used 7 filter bag housings on a common manifold. Model M-TBF-0702. This was custom built with a 4" manifold. There are seven x 2" flanged Bag filters. Takes #2 long bags. Quick opening lids with lugs. Flow rate at 1,233 GPM.

Filter Bags - Qty 155 Size 2

Asset ID: H2036

Available: 1

Filter bags for polish filter, size #2. There are 6 boxes of 25 bags each. P2S Polyester Felt Filter Bag. Bags measure 2 ft 5 in long. Priced for the LOT.

Bag Filter

Asset ID: 8854

Available: 1

Multiple Bag Filter by Klear. Connections 8” 150# inlet/ outlet;. Has Quick Change Head, Service Pressure Rating - 150 PSI, No. of Bags – 8. An 8-bag industrial multi-bag filter housing typically handles a maximum flow rate of 1,500 to 2,000 GPM (gallons per minute) (or up to roughly 320 m³/h), using eight standard Size #2 filter bags (7" diameter by 32" length) Must be verified by opening up filter housing.

Filtration Skid - Pilot Size Used

Asset ID: 8809

Available: 1

### Used Filtration Skid - Pilot Size ### **Stainless Steel Skid mounted self contained filter skid. All wetted parts stainless steel 304** Leem Model 24-MVS-40 Vertical Tank, Vertical Leaf, Pressure Leaf Filter Skidded Unit. MAWP ASME and stamped - rated for 90 psig at 300F & Full Vacuum. - Filter vessel is 24" outside diameter with (6) 5-Ply Riveted filter leaves with PZ-80 outer filter cloth constructed of type 316ss on 3" spacing affixed to a common 304ss manifold pipe for 40 square feet (3.716 m2) of filter area. Constructed of type 304 stainless with top & bottom swing bolt closures, top to have a davit and hydraulic jack cover lift for ready access to the filter leaves and hinged bottom cover with a counterweight to facilitate filter cake removal. - Includes all necessary ball valves, gaskets, and piping - Slurry tank - 160 gallon pre-coat tank, motor & pump unit: 1x2-8 pump, 3500 RPM, 5 HP; Agitator: Neptune model NO. JG-4.0, gear drive mixer - Control panel mounted to skid. - Entire assembly mounted to 304 SS support skid. - Comes with two sets of screens a) PZ-80 outer filter screening 316ss, and b) 24 x 110 mesh stainless Depending on the product being filtered, the amount of solids, and temperature of the product, the flow rate can vary through the filter. With a typical veg oil product with little solids (maybe 1-2%) the flow rate can be as high as 3,000 to 4,000 PPH. If used for tallow or other fats and oils that may have larger amounts of solids, the flow rate can drop to 2,000 PPH through the filter. This unit was used as a rental unit but has been completely checked by the factory to ensure good working order.

Pressure Leaf Filter Horizontal 516sf

Asset ID: F20820

Available: 4

Horizontal pressure leaf filters - filter shells and cylinders only Industrial filter press (used), Series 60-6-20 Horizontal pressure leaf filter. Has 516 sf filtration area. Built for a project in 1994 and never used. Note that these are NOT reconditioned - will need refurbishment. Type 122.902, Serial F-20818. ASME Nat'l Bd# 3627 , rated at 70 psi at 310F. No A-frame or trolleys. No hydraulic power pack. No filter leaves. Approximate size 6 ft wide x 15 ft long x 8 ft tall, Empty weight 6800 pounds. See LINK for drawing of a representative filter - not the exact one. These are single filter units, not head-to-head. Price quoted is As Is loaded on your truck. NOTE: We actually have (4) of these filter shells. {F20818, F20819, F29820, F20821) - priced separately. We can recondition, add filter leaves, and add hydraulic unit if desired for extra

Filtration Skid - Pilot Size NEW

Asset ID: 7467

Available: 1

### New Filtration Skid - Pilot Size ### **Stainless Steel Skid mounted self contained filter skid. All wetted parts stainless steel 304** Leem Model 24-MVS-40 Vertical Tank, Vertical Leaf, Pressure Leaf Filter Skidded Unit. MAWP ASME and stamped - rated for 90 psig at 300F & Full Vacuum. - Filter vessel is 24" outside diameter with (6) 5-Ply Riveted filter leaves with PZ-80 outer filter cloth constructed of type 316ss on 3" spacing affixed to a common 304ss manifold pipe for 40 square feet (3.716 m2) of filter area. Constructed of type 304 stainless with top & bottom swing bolt closures, top to have a davit and hydraulic jack cover lift for ready access to the filter leaves and hinged bottom cover with a counterweight to facilitate filter cake removal. - Includes all necessary ball valves, gaskets, and piping - Slurry tank - 160 gallon pre-coat tank, motor & pump unit: 1x2-8 pump, 3500 RPM, 5 HP; Agitator: Neptune model NO. JG-4.0, gear drive mixer - Control panel mounted to skid. - Entire assembly mounted to 304 SS support skid. Depending on the product being filtered, the amount of solids, and temperature of the product, the flow rate can vary through the filter. With a typical veg oil product with little solids (maybe 1-2%) the flow rate can be as high as 3,000 to 4,000 PPH. If used for tallow or other fats and oils that may have larger amounts of solids, the flow rate can drop to 2,000 PPH through the filter. Please allow 14-16 weeks for delivery ARO. Note: We can offer this unit as a **Rental** on a per month basis, first come, first served.

Filter Press 86 sf Vertical

Asset ID: 2021

Available: 3

Sharplex vertical filter presses with structural steel frames. Pressure leaf filters. Capacity 8 sq meters (86 sf) 6 bar at 150 C (90 psig at 300F). There are 3 of these filters - and a place in the structure for one more. Includes some leaves but new sets will have to be purchased. There are some instruments, valves, and small polish filters on these skids surrounding these filter presses - they are included. Includes the 16" butterfly valve on 2 of these filters. Quantity (3) filters in (2) structures. Package - All included in quoted price. Loading on your truck is free.

Pressure Leaf Filter Horizontal 412 sf

Asset ID: 2025B

Available: 2

Reconditioned Industrial Filter Horizontal pressure leaf filter press, Model D, Series 60-4-16, Type 122.902, Filtration area 412 sq ft. Tank dia: 60 inches dia Includes Set of 16 filter elements (leaves) 5-Ply with wire mesh, All stainless steel leaves. Used leaves in great condition. Hydraulic power pack with oil reservoir and 5 HP pump, basic controls to open/close bundle of leaves and door. Pneumatically operated vibrator. Hydraulic cylinders with oil piping. A-frame and beams are included. Unit will be sandblasted, primed, and final painted.{photos of finished unit are representative of what this one will look like after reconditioning}. Delivery approx 4-5 weeks. Quantity available (2). Priced separately, discount offered if both are purchased.

Vertical Pressure Leaf Filters

Asset ID: R258

Available: 2

Vertical pressure leaf filters. Size 3 ft dia x 60" tall. Has 18" discharge butterfly.Last used as Bleach Filters. Idle since 2006. Quantoty (2) priced separately

Pressure Leaf Filter, Vertical 250sf

Asset ID: F7239

Available: 2

Mahle vertical pressure leaf filters. Model VPLF 1000-24/1500. Has 12 filter leaves for surface area of 24 sq m (258 sf). Can hold cake volume 530 dm3. Tank is cs, leaves are ss 5-ply. Physical size 1000 mm dia x 1500 mm element height., weight 1190 kg. Serial No. 90570, ASME Nat'l Bd# 570 rated at MAWP 87 psi @ 302F. Built 2009. Used as cold soak clarification filters for biodiesel. Idle since 2022. Qty (2) - priced separately

Dust Cartridge Filter 129sf

Asset ID: AF11

Available: 1

Wamflo stainless steel cartridge filter for powder. Type FNC2J12PPOY, serial 11-FN-13-0004866. Size 24" dia x 36" tall on ss skid. Has 8 elements x 920mm long. Filter elements are pleated non-woven polyester. Filter surface area is 12 sq m (129 sf). Self-cleaning - uses compressed air countercurrent cleaning system with timer. Manufactured by Wam.

Cartridge Filter Vessel

Asset ID: 7899

Available: 1

### Cartridge Filter Vessel ### Horizontal filter vessel with 19 elements for coalescing or particle cartridges. Max flow 7,000 gpm gasoline and 5,000 gpm water. ASME MAWP 200 psig at 100F.. Size 36" dia with 12" Inlet. For 6" dia cartridge filters of 40", 60" & 80" long. Particle filter cartridges are normally 6" dia x 80" long. Coalescing cartridges are normally 6" dia x 40" long. On saddles and steel skid. Used but in good condition.

Cartridge Filters

Asset ID: FC-1513

Available: 2

Cartridge filters, material stainless steel 304. Has . 4" inlet and 4" outlet. Filter specs are approximately: hold (20) two inch cartridges that are 40" long. Diameter on filter is 16 inches. OAH is 48" ( 44" to the first lip ). Filter is on angle iron legs 4" tall. Quantity (2) - priced for the set

Filter Press 240 sq ft

Asset ID: 8813

Available: 1

### M W Watermark Filter Press ### ** 30 poly plates 630mm x 630mm (2 ft x 2 ft) plus front & back plate.** Used cloths Surface area 240 sq ft. Hydraulics air driven, 2" feed pipe and 1.5" discharge piping * Max feed pressure: 100psi, Air supply pressure: 100psi * Hydraulic clamping pressure: 35,000psi, Relief pressure: 4,100psi - Serial # FP01199.

Larox Press & Frame Filter Press 1033 sf

Asset ID: 8590

Available: 1

### Outotec Larox Vertical Pressure Filter ### Vertical pressure filter press. Manufactured by Outotec (Larox). - 1033 sq ft vertical pressure filter press. Model #PF 96/96 M48-2-60. Rated to 16 bar pressure - Capacity: 23,500 kg/hr Dry Solids Capacity. Chamber volume 5.76 cu m, Chamber height 60 mm - Material: 316 Stainless Steel Wetted Parts. 16 Filter Plates. Plate Size: 1500 x 4010mm. - Main Unit Dimensions 7935 mm x 5470 mm x 5860 mm (L x W x H). Filter Cloth dimensions: 1700 mm x 95.5 mm Filter Cloth (W x L). 110 kw, 1800 rpm, 575 Vac, 3-phase, 60 Hz - Hydraulic Power Pack: Hydraulic unit motor (M1HU). 15 KW, 1800 rpm, 575 Vac, 3-phase, 60 hz Hydraulic Oil Cooler Motor (M3HU). 3 KW, 575 Vac, 3-phase, 60 Hz Hydraulic Oil Heater (R1HU). Physical size 3120 x 1865 x 2035 mm tall (3400 kg) - Controls: Control panel and all plc controls with HMI touch screen. Physical size 800 x 400 x 1900 mm tall.(250 kg) - Air Muffler: 950 mm dia x 2610 mm long (550 kg) Serial #1125. Built in 2014. New-still crated.

Plate and Frame Filter Press 2362 sf

Asset ID: F3000

Available: 4

### McLanahan Recessed Plate Filter Press 2362sf Like NEW ### - These 4 presses were installed and tested - never ran in production - Polypropylene plates - plate size 2m x 2m (approx 6.5 ft x 6.5 ft). - Two presses have 151 plates for 1961 sq ft surface area. Press model pe035e34 (Membrane) - Two presses have 180 plates for 2362 sq ft surface area. Press model pe035e42 (Recessed Plates) - Pressure rating at 200 psi - Approx size 843 inches long x 109 inch wide x 169 inch tall, weight each about 140 tons - Discharge opening 89 inch x 613 inch - Each press has integral hydraulic system Overhead beam design. The Overhead Beam style results in faster opening and closing for greater production and better cake release in tailings applications. It also provides larger plate openings for better cleaning and maintenance access. Unlike the traditional plate and frame presses, McLanahan’s Filter Press line features modern recessed plates or membrane plates, both of which create a chamber for dewatering the slurry without trapping the cakes within the frames. This allows the dewatered cakes to discharge more easily than with traditional plate and frame presses. McLanahan’s membrane filter plates offer higher production rates for compressible slurries or slurries that require a cake wash or cake blow. **Priced for the LOT - Qty (4) presses**

JWI J-Press Filter Press 3075 sq ft

Asset ID: 1088

Available: 1

### JWI J-Press 1500 mm ### Evoqua Water Technologies (now part of Xylem) 1500 mm J-Press. Model #1500N32-76-150SYLC. Filter area 3075 sq ft. 76 plates. Cake thickness 32 mm, Capacity 150 cu ft. Low Operating Hours. Less than 60 days in operation. The J-Press filter press is one of the most versatile dewatering devices on the market, being used in a wide variety of industrial and municipal applications. The J-Press filter press can be used to recover both solids and liquids from a waste or process stream. With superior materials of construction, the J-Press filter press is especially useful in the dewatering of aggressive acid and alkali suspensions.

Solvent Recovery Membrane Skid

Asset ID: V2267

Available: 1

### SciPhy X-Spiral 2.5 Solvent Recovery Like NEW - Still in Crate ### SciPhy solvent recovery, dewaxing, and color remediation system. Rated at 60 gph. Membrane skid still in crate, includes compressor and pneumatic motor and tank. This is an. affordable nanofiltration membrane recovery system (OSN). ***This machine is in excellent shape - selling as used but has only been used less than a dozen times*** - Complete Control Over Product Purity: The X-Spiral gives operators full control over concentration of solution. - No Solvent Phase Change: Creates greatly reduced energy use that lowers operating expenditure and raises profit margins. - All In One Skid Including Utilities: No boiler or cooling tower necessary means greatly reduced startup and commissioning time. - Highly Efficient: Unique dual pump system only uses a third of the energy of other single pump systems. - Full Parameter Control. Design features and mounted HMI provide ease of use and optimal workflow. - Affordable Membranes. X-Spiral uses lower cost membranes than many competitors. Shipping dimensions: 2 pieces Membrane skid already on a pallet 45” x 49” long x 54” tall, weight 567 pounds Also box of replacement filters size 16 x 16 x 50” long, weight 50 pounds SHIPPING. Bset to ship crate LTL, and send box via USPS or UPS.

Membrane Filter Press 1000sf

Asset ID: 5547

Available: 1

**Membrane Filter Press** 6 bar (90 psi) and 1000 sf surface area. With hydraulic press and polypropylene plates. Supplied by DeSmet, built by Welders. Built 1985. Model OMF-1200, S/N 81630. 1000 square ft. filter area. 3" inlet/outlet. 51" W x 24' L x 90" H. Bed is 15' long. Uses 47" x 47" x 3.5" polypropylene plates. 64 plates included. Built for 6 bar (90 psi). 5.5kW, 440V, 3 Phase 50 Hz. Ram Info: Model CE 200.140.900KT5A. Co. No. 406383. Design No. 114357C. 900mm length. Includes manual for installation, operation, and maintenance. This filter will need new controls - we can furnish if desired. Price includes removal & loading. Available immediately.

Reverse Osmosis Membrane Filter

Asset ID: 2028A

Available: 1

### Reverse Osmosis RO Membrane Filter System ### Material specs are 316 stainless. Tanks are 304 stainless. Includes controls and HMI. Designed for flow rate of 50-60 gpm at 150 - 250 psig. Membranes not included. Last used on well water - removed and stored in controlled warehouse, ready for loading **Three stage** - Stage One has (18) 4" vessels, 5 elements per - Stage Two has (18) 4" vessels, 5 elements per - Stage Three has (12) 4" vessels, 5 elements per **Includes 6 pumps. All 6 pumps driven by VFDs** - (3) recirculation pumps (40HP, 40HP, 20HP) - (3) feed pumps (30HP each) **Tanks** - One Feed tank 500 gallons and two smaller tanks (perm & conc) at 120 gallons each. **Controls and HMI incuded**

Filter

Asset ID: 31-FL-244

Available: 1

Vertical single stage filter, 10 micron, carbon steel, 3" pipe in/out top entry. Designed for 101,940 #/hr (205 gpm) solvent with 0.2 PPMW solids, 5 PSID. MAWP 450 psi/FV @350F, Nat'l Bd# 6166, s/n 6171. Used as solvent filter - like new. Mfg by TM Industrial in 2009, used 42 days.

Coalescer Decanter ss

Asset ID: 7308

Available: 2

Coalescer. Horizontal 800 gallons. Material stainless steel 316. Size 42 inches ID. ASME MAWP 15 psig at 250F and 75 psig at -20F. Last used in biodiesel service as wash system decanter VC 4053 and VC 4058. Qty (2) priced separately

Dewatering Belt Press

Asset ID: 8558

Available: 1

### Dewatering Belt Press ### Frontier dewatering belt press. Model FTXI-4700. Serial # 0182. Dewatering belt press delivers reliable solid-liquid separation & effective sludge or slurry dewatering. Ideal for use in wastewater treatment, mining, food processing and the chemical industry. Technical Data: * Belt Width- 47 inches * 3HP motor * Spray water flow- 35 to 45 GPM * Spray water pressure- 100 to 120 psig * Air flow @ 100 psig / 2 scfm * Main air pressure- 100 psig This belt press has been removed and is located in protected warehouse. Price incudes loading on your truck. Any special handling or crating/skidding will be extra.

Belt Dewatering Filter Press 1.2 meter

Asset ID: 1234

Available: 1

### Klampress Belt Filter Press ### Dewatering, desludging filter press - Model KP-1. Mfg by Ashbrook. Part # KP000586, MPS number 20407, serial number 66448-1765. Belt size 59'-11" long x 47.25" wide. - Includes hydraulic unit - Has spare main belt - Idled in 2022 - Still installed - See drawing for all dimensions Belt presses are a common type of mechanical dewatering equipment used to dewater most biosolids generated at municipal wastewater treatment plants and many industrial applications. Belt presses are used to remove water from liquid wastewater residuals and produce a non-liquid material referred to as “cake”. The Belt Filter Press is a broadly applicable product for dewatering municipal biosolids and industrial sludges.

Motorized Strainer

Asset ID: 7161

Available: 1

Fluid Engineering Strainer Model 793, S/N 2919, Size 10, Max Pressure 150, Temp 32-150F, SS Mesh Screen, 1/16th in or 1575 Micron Equivalent

Basket Strainer

Asset ID: 6003

Available: 1

Fluid Engineering Series 105 Simplex Strainer. Cast 316 Stainless Steel. S/N 3100. 150 max pressure. Size 3.

Seitz Filter 3 sq ft

Asset ID: 2060

Available: 1

Seitz Enzinger Noll filter press. Model EF60/65CB serial no. 963048 rated at 6 bar (90 psi). Removable filter plate, Surface area 0.29 sq m, 100 liter. Construction ss316 stainless steel. Chamber 24" dia rated at 6 bar (87 psi) jacketed for 6.5 bar (94 psi) with manual screw lift. Built 1989. Note: This filter had a chiller no longer available. Part of an entire CBD extraction system - enter PK6020 to see all components.

RO Reverse Osmosis System

Asset ID: 1923

Available: 2

**Siemens reverse osmosis system (RO)**. Two identical RO systems - each arranged in a 3-stage 5-3-2 array. Designed to treat process tertiary effluent water and supply demineralized water. Flow is 190 gpm at 55 psig. Filter cartridges with 5 micron pore size protect the membranes. The membranes reduce the total dissolved solids (TDS) of the incoming stream of 14,309 mg/l to 138 mg/l in the final product water. The membranes also reduce the TOC content by >80%. Has 4" inlet, 3" outlet permeate pvc flanges. The RO pump is designed for 190 gpm at 410 Ft TDH and is driven by a 75 HP motor 480v 3/60. Each RO has its own controls but the VFD is not included. Built in 2007, decommissioned in 2011. Still installed. Special note: Qty (2) completely separate systems - priced separately. If both systems are bought, we can give a $10,000 discount from the total. Please note the price includes removal and loading - contractor quote is budgetary until scope clearly defined. Price may vary based on scope. We can also deliver to you. Spare set of membranes available.

Reverse Osmosis Unit

Asset ID: V2213

Available: 1

Dual element reverse osmosis unit (RO), GrowniX

Microfiltration

Asset ID: 1922

Available: 1

**Memtek EFC 3600 tubular microfiltration system by Siemens** - (3) microfiltration skidded modules in this set as shown. - Crossflow tubular membranes pvc - Concentration FRP tank 8 ft dia x 9 ft tall (3300 gallon capacity). - Mix Tank, FRP with top entering agitator - Circulation pump is centrifugal 50 HP 460/3/60 rated at 1060 gpm. - Overall footprint of system is approx 43 feet x 25 feet wide x 12 feet tall. Each skid is 33 ft x 8 ft x 12 ft tall. The basic EFC system is a skid-mounted package consisting of membrane modules, recirculation pump, in-place cleaning loop, backpulse mechanism, instrumentation and controls. The rugged fluorocarbon membranes are non-plugging, abrasion and chlorine resistant. The skid-mounted design is compact and requires minimal floor space. The Memtek® E-Series systems incorporates proprietary crossflow tubular membranes which remove precipitated contaminants and produce a high quality filtrate suitable for discharge or further treatment. Please note the price incudes removal and loading - contractor quote is budgetary until scope clearly defined. Price may vary based on scope. We can also deliver to you.

Include all

Include all

Include all

Include all

Include all

Include all

Include all

All Assets from Category 'Filters'

37 Results

Sort:

Relevance

Refine Assets By

Include all

Include all

Include all

Include all

Include all

Include all

Include all

Asset ID: BDFB-001

Available: 1

Bag Filter

Asset ID: BDFB-002

Available: 1

Bag Filter

Asset ID: VLF-113

Available: 1

Vertical Leaf Filter

Asset ID: cp101

Available: 1

Baghouse Filter Silo 4300 sf

Asset ID: 8121

Available: 1

Baghouse Dust Collector 62sf

Asset ID: 2101

Available: 1

Bag Filter ss with platform

Asset ID: 8817

Available: 4

Bag Filters 4" ss

Asset ID: 8829

Available: 1

Multi Bag Filter System 1200 gpm

Asset ID: H2036

Available: 1

Filter Bags - Qty 155 Size 2

Asset ID: 8854

Available: 1

Bag Filter

Asset ID: 8809

Available: 1

Filtration Skid - Pilot Size Used

Asset ID: F20820

Available: 4

Pressure Leaf Filter Horizontal 516sf

Asset ID: 7467

Available: 1

Filtration Skid - Pilot Size NEW

Asset ID: 2021

Available: 3

Filter Press 86 sf Vertical

Asset ID: 2025B

Available: 2

Pressure Leaf Filter Horizontal 412 sf

Asset ID: R258

Available: 2

Vertical Pressure Leaf Filters

Asset ID: F7239

Available: 2

Pressure Leaf Filter, Vertical 250sf

Asset ID: AF11

Available: 1

Dust Cartridge Filter 129sf

Asset ID: 7899

Available: 1

Cartridge Filter Vessel

Asset ID: FC-1513

Available: 2

Cartridge Filters

Asset ID: 8813