Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Fume hoods'
2 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
Lab Hood, Filtered
Asset ID: 2443
Available: 1
### XPERT Filtered Balance Systems Lab Hood ###
XPERT Filtered Balance System With Guardian Airflow Monitor. Manufactured by Labconco. Model # 3950301. serial # 080587564. Power for fan and light Single phase, 115v, 14amp. Contains built in blower and exhaust HEPA filter
Containment-enhancing features ensure that potent powders frequently found in pharmaceutical, dry chemical, and industrial hygiene applications are kept away from the operator.
- 3 ft wide and incudes stand
- No outside ducting required
- Accommodate large analytical and micro balances
- Intrinsically safe, negative-pressure design
- Space-saving design–no separate filtered exhauster is required
- Fluorescent lighting
Asset ID: 2443
Available: 1
Lab Hood, Filtered
### XPERT Filtered Balance Systems Lab Hood ### XPERT Filtered Balance System With Guardian Airflow Monitor. Manufactured by Labconco. Model # 3950301. serial # 080587564. Power for fan and light Single phase, 115v, 14amp....
Biosafety Lab Hood 4 foot Type B1
Asset ID: 8111
Available: 2
### Biosafety Cabinet Lab Hood Class II Type B1 by Nuaire ###
- HEPA Exhaust Filter 11-1/2 inch and supply filter 5-7/8 inch - both are 99.99% efficiency on 0.3 microns
- Nominal width 4 foot
- Inflow fpm 105 fpm, downflow 70 fpm
- Touch link control system
- Cabinet stainless steel 304L
- Includes stand shown in photos
Nuaire sterile hood. Series # 66, serial # 181074071917.Manufactured in 2017 and is 115VAC, 60Hz, 1 phase, and 10amps.
The NU-427 preserves the Class II Type B1 cabinet’s traditional role of serving as an intermediate option between recirculating and total exhaust cabinets but with a control system fit for modern applications. By exhausting air from the entire length of the back half of the work zone through slots in the back wall, this design not only allows users to continue the recommended practice of working “clean to dirty” and deep inside the work zone but also leaves the dished work surface intact to retain spills. This exhaust is powered by an external facility blower that is interlocked with the cabinet’s own motor through a redundant system to provide two layers of protection that minimize the risk of blowing air out of the cabinet should the external blower fail: cabinet exhaust is monitored by not only a mechanical pressure switch but also a differential velocity pressure-flow grid. A touch screen displays the readings from both this flow grid and a downflow sensor in the work zone at all times for the cabinet operator. Standard models meet the requirements of the respected NSF/ANSI 49 standard for biosafety cabinets.
**Two available ( priced separately )**