Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Dewatering'
3 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
Dewatering Screw Press CP-4
Asset ID: 2353
Available: 1
Vincent Compact Press Model CP-4
- Continuous dewatering press. Graduated pitch, interrupted flight screw to maximize dewatering. Final pressing is controlled by a discharge cone
- Capacity 150 to 500 lbs/hr (0.5 to 1 tpd)
- 1.5 HP motor 230/460 3/60 - includes VFD
- Model CP-4, serial number 19019-1
- All contact parts ss304
- Screen: The press is supplied with a single piece stainless steel wedgewire screen, with slots that are ~0.006" wide. It has stationary resistor teeth to prevent co-rotation
- Compression Screw: The 4" diameter screw with four stages of compression features interrupted, reducing pitch flights. This design allows the press to accept variations in input volume and consistency without adjustment.
- Last used for food grade hemp/biomass.
See manual and product specs in LINKS. Very few hours - close to 85 total.
**This press has been removed and is crated for shipping Wood has not been fumigated and does not meet ISPM15 rules for international shipping). - Ready to load and ship.** Size 40 x 84 x 62 in tall, weight 1154 pounds
Asset ID: 2353
Available: 1
Dewatering Screw Press CP-4
Vincent Compact Press Model CP-4 - Continuous dewatering press. Graduated pitch, interrupted flight screw to maximize dewatering....
Dewatering Screw Press CP-6
Asset ID: 2111
Available: 1
### Vincent Dewatering Screw Press, Model CP-6 ###
Capacity 2-4 TPD (300-1,000 lbs/hr)
Complete and operational unit - used. Screw at 20 rpm. Pneumatic ram for backpressure control of press. Custom stand for liquid capture included. The screen is a D-156 profile wedge wire for media press, measured at approximately 430 microns. Motor Leeson 5 HP 1755 rpm 230/460v 3/60.
Asset ID: 2111
Available: 1
Dewatering Screw Press CP-6
### Vincent Dewatering Screw Press, Model CP-6 ### Capacity 2-4 TPD (300-1,000 lbs/hr) Complete and operational unit - used. Screw at 20 rpm. Pneumatic ram for backpressure control of press. Custom stand for liquid capture included....
Dewatering Screw Press CP-4
Asset ID: 8808
Available: 1
Vincent Compact Press Model CP-4
- Continuous dewatering press. Graduated pitch, interrupted flight screw to maximize dewatering. Final pressing is controlled by a discharge cone
- Capacity 150 to 500 lbs/hr (0.5 to 1 tpd)
- 1.5 HP motor 230/460 3/60 - includes VFD
- Model CP-4, serial number 17374-L
- All contact parts ss304
- Screen: The press is supplied with a single piece stainless steel wedgewire screen, with slots that are ~0.006" wide. It has stationary resistor teeth to prevent co-rotation
- Compression Screw: The 4" diameter screw with four stages of compression features interrupted, reducing pitch flights. This design allows the press to accept variations in input volume and consistency without adjustment.
- Used, but in excellent condition. Only ran for 3 hours.