Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Biomass handling'
2 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
Biomass Bale Handling & Grinder System
Asset ID: 1710
Available: 1
### Biomass Bale Handling System ###
- 4 infeed processing lines for bulk bale handling and grinder plus silo and baghouse
- Bale size was 3' x 4' x 8' long - processed in modules of 6 (2 bales wide x 3 bales high.
- Capacity 465 tons/day x 4 lines - 1,860 TPD.
Each line can hold 2 trucks worth of bales prior to the singulator (150 tons total (288 bales). Each line includes automatic singulation, de-stringing, coarse chop of bales, hydraulic power pack, and then grinders. The silo collects "fines" from the operation for disposal. This system fed an ethanol plant, and a biomass boiler/cogeneration system. Ideal for both. Grind size was <1” but screens can be changed to modify grind size. The biomass handling equipment would work perfectly in preparing biomass for a pelleting operation, or for burning in a biomass boiler from the included silo. Or this could be entirely repurposed to your need. Built 2013 - in very good condition. The general layouts and general description of this equipment are attached as links for more detailed information.
This system has been removed except for the silo/baghouse system.
- See links for drawings and description.
- See video of system in links - biomass system starts at 0:57 second mark.
Asset ID: 1710
Available: 1
Biomass Bale Handling & Grinder System
### Biomass Bale Handling System ### - 4 infeed processing lines for bulk bale handling and grinder plus silo and baghouse - Bale size was 3' x 4' x 8' long - processed in modules of 6 (2 bales wide x 3 bales high. - Capacity 465 tons/day x 4 lines - 1,860 TPD....
Plug Screw Feeder
Asset ID: B-1011
Available: 1
### Valmet Plug Screw Feeder with Pre-Compression Screw and Shredder ###
**These units are NEW old stock, never used**
Designed for infeed raw material chips density 100 kg/m3, moisture content 20-48%
Design flow rate 530 dry tons per day soft wood chips (500 BDST/D); Max capacity 1000 BDST/D; Turndown rate 50%
**Valmet plug screw feeder**
- Fed by a pre-compression screw section, and 48" shredder at outlet
- 850 HP Siemens motor 1750 rpm 460v 3/60
- Gear Reducer ratio 25:1. Nominal speed 69 rpm, range 35-105 rpm
- Skid size approx 25 ft long x 7 ft wide x 4.6 ft tall. Total weight including motor 45,400 lb
- Inlet 35.83" x 25.79"
**Pre-compression screw**
- Materials of construction stainless steel 304L for all contact parts
- Sits on top of plug screw at 90 degrees with s 24" diameter- top force feed
- Capacity Volume/Revolution inlet/discharge: 45 L / 22.5 L. Capacity / revolution at 110 kg/m3 = 5.46 BDST/D and net max capacity at 110 kg/m3 = 530 BDST/D
- 250 HP motor 1750 rpm 460v 3/60 v-belt drive to gear reducer V-belt reduction 1:52
- Gear reducer SEW Eurodrive ratio 18:1. Final rpm nominal speed 65 rpm, range 45-97 rpm
- Overall size approx 15.2 ft long x 7 ft wide x 5.8 ft tall, weight 17,300 lb
- Outlet: 35.83" x 25.79"
**T-Pipe 48" Shredder**
- Fed from plug screw feeder 24" biomass inlet
- MAWP 350 psig at 800F
- 100 HP motor 1750 rpm 460v 3/60
- Gear reducer 8.9:1 for nominal 197 rpm
- Shredder size approx 5 ft x 10.6 ft x 9.3 ft tall, weight 23,650 lb
- Outlet 24" flange 600#
**Condition** - These units are sealed against weather, protected, and in long term storage inside a third party protected warehouse. No known refurbishment required - assets are sold As Is Where Is.