Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Fluid bed'
1 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
Fluid Bed Dryer
Asset ID: 8411
Available: 1
### Fluid Bed Dryer ###
Fluid bed dryer design rate 4,244 lb.hr with infeed moisture at 20% by wt, and final product output at 3% by wt.
- Evap capacity 744 lb/hr
- Comenco systems duct heater/burner and control panel. Model DH-65-4-0-NPO. Serial # 91322. Runs on natural gas. Maximum input 4,000,000 BTU / h.
- Bed size 3 ft x 12 ft static fluid bed
- Induced Draft Fan: Located at Cyclone at top. Air Blower Twin Cities Size 921-CW driven by 75 HP motor 1475 rpm 460v 3/60. Rated at 15,879 cfm at 13" sp. FANC/03
- Forced Draft Fan (inlet) Fan missing but housing and inlet ducting is still there: WAS 50HP 1800 rpm 460v 3/60 Twin Cities Air Blower 7897 cfm at 16 sp. Inlet fan FANC/01
- Forced Draft Cooler Fan: 20HP 1800 rpm 460v 3/60 Twin Cities air blower 3039 cfm at 12 sp Outlet Fan FANC/02
- (4) Sifter Screen Units. Tru-Balance (2) 40 7/8" sq, (2) 30 7/8" sq
- Carbon steel construction
- Ducting included
- Price quoted is removed and loaded on truck.
Last used for corn germ drying - product density at 32 PCF. See Specs in Links.
Last Ran in 2011 - Was functional when shut down