Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Mills & hammermills'
7 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
Wood Grinder
Asset ID: 7444
Available: 1
## Wood Grinder ##
Arasmith MFG. Co. - Service No. 34.30.HH.1517.596 14.HT.2ADW/8 HAS2
- Infeed opening 30" x 18"
- Powered by 100 HP Lincoln AC Motor, TEFC Energy Efficient, RPM 1765, Frame 405T, Volts 230/460, Amps 226/113, 3 Phase, 60 Hz
- Safety switches on all guards and doors to shut the machine off and not allow to turn on when guards or inspection doors are opened.
- Wood Grinder has been reconditioned and owner says it is in great working condition. Customer will have to make that decision. We are selling As Is Where Is.
- This grinder was being used to make mulch.
Asset ID: 7444
Available: 1
Wood Grinder
## Wood Grinder ## Arasmith MFG. Co. - Service No....
Grinding Mill
Asset ID: 7770
Available: 1
Used Sweco model M60MS Vibro-Energy grinding mill. 62" diameter X 3' high grinding chamber with 316 stainless steel liner and solid 316 stainless steel cover. 2" product discharge. Heating or cooling panels between inner and outer shell. 10 HP, 3 phase, 60 cycle, 460 volt motor.
Asset ID: 7770
Available: 1
Grinding Mill
Used Sweco model M60MS Vibro-Energy grinding mill. 62" diameter X 3' high grinding chamber with 316 stainless steel liner and solid 316 stainless steel cover. 2" product discharge. Heating or cooling panels between inner and outer shell. 10 HP, 3 phase, 60 cycle, 460 volt motor.
Fine Grind Air Swept Mill
Asset ID: 2037
Available: 1
Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010. Driven by 400 HP motor 3/60/460v 1790 rpm. **Comes with 400 HP soft start**
Asset ID: 2037
Available: 1
Fine Grind Air Swept Mill
Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010....
Pin Mill Impact Mill
Asset ID: M2002
Available: 1
### Pin Mill - Centrifugal Impact Mill ###
Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460 V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial number 504.
The Simpactor® pin mill is a centrifugal impact mill that reduces low to medium density materials to uniform, fine particle sizes of 50-325mesh.The Simpactor® is used in milling applications where low maintenance and low wear are critical. Typical Simpactor® milling applications include food product processing such as corn fractionation, flours, starch densification, corn slurry, sugar and sweeteners. Semi-abrasive material applications including aluminum sulfate, fertilizer, gypsum, soda ash, deagglomerate powders including tungsten), talc, clay and kaolin
Asset ID: M2002
Available: 1
Pin Mill Impact Mill
### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge....
Pin Mill Impact Mill
Asset ID: M2003
Available: 1
### Pin Mill - Centrifugal Impact Mill ###
Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460 V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial number 703.
The Simpactor® pin mill is a centrifugal impact mill that reduces low to medium density materials to uniform, fine particle sizes of 50-325mesh.The Simpactor® is used in milling applications where low maintenance and low wear are critical. Typical Simpactor® milling applications include food product processing such as corn fractionation, flours, starch densification, corn slurry, sugar and sweeteners. Semi-abrasive material applications including aluminum sulfate, fertilizer, gypsum, soda ash, deagglomerate powders including tungsten), talc, clay and kaolin
Asset ID: M2003
Available: 1
Pin Mill Impact Mill
### Pin Mill - Centrifugal Impact Mill ### Sturtevant Model 3B Simpactor Mill, 16" diameter, carbon steel construction. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge....
Pin Mill
Asset ID: M2004
Available: 1
### Frewitt PM-Lab Pin Mill ###
Frewitt PM-Lab Pin Mill, includes stainless steel feed hopper with 20" diameter top and 60º cone bottom, leading to 2-1/2" diameter discharge, feeding into milling chamber. Front cover includes port for nitrogen feed. Product discharges through 3/4" diameter outlet. Capable of up to 7 Nm torque capacity.
Manufactured by Frewitt, type MA-FreDrive-PM-Lab, project number PRO-18-0222, serial number 491963.Mounted on stainless steel stand.
Manufacturer specifications (based on FlexMill-Lab PM-160): The FlexMill-Lab PM-160 is a high-performance pin mill designed for pulverizing hard or crystalline products to a particle size down to D90 of 10 µm. Ideal for processing small-scale laboratory batches of 50 g to 2 kg, it can also be used for pilot-scale production with a capacity of 30–150 kg/h.
Asset ID: M2004
Available: 1
Pin Mill
### Frewitt PM-Lab Pin Mill ### Frewitt PM-Lab Pin Mill, includes stainless steel feed hopper with 20" diameter top and 60º cone bottom, leading to 2-1/2" diameter discharge, feeding into milling chamber. Front cover includes port for nitrogen feed....
Attrition Mill
Asset ID: M2005
Available: 1
### Munson Model K9V-24 attrition mill ###
Munson Model K9V-24 attrition mill, 24" diameter disc diameter, driven by 25 HP, 3600 RPM, 230/460V, 3/60Hz motor. Includes pipe feed into milling chamber. Mill and drive are unitized on frame and include manual adjustment for disc spacing to control fineness of product. Attrition Mills from Munson Machinery are ideally suited for reducing fibrous and friable materials within a relatively narrow particle size range from coarse down to 100 mesh. Previously used to grind bran. Serial # FM-1878M
Typical applications include materials that cannot be reduced by impact (hammer mills or pin mills) or by screen classification (screen classifying cutters) including: seeds, grains, spices, tobacco, roots, cellulose, fibers, minerals, metal powders and other products.