Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Oilseed processing'
12 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
)
)
)
)
)
Oilseed Dryer
Asset ID: P105D
Available: 1
Belt-O-Matic oilseed dryer, capacity 4 tons/hr. Natural gas fired bean dryer BNW model 320B2. Heat source is natural gas two-pass with 20 HP fan, and a 9 ft cooling section at bottom. Rated at 5 MMBTU with max air flow 20,000 cfm. Fan HP 20HP 460v 3/60. Idled since 2006
Asset ID: P105D
Available: 1
Oilseed Dryer
Belt-O-Matic oilseed dryer, capacity 4 tons/hr. Natural gas fired bean dryer BNW model 320B2. Heat source is natural gas two-pass with 20 HP fan, and a 9 ft cooling section at bottom. Rated at 5 MMBTU with max air flow 20,000 cfm. Fan HP 20HP 460v 3/60. Idled since 2006
Cracking Mill
Asset ID: P107
Available: 1
Cracker rolling mill - sized for 300 tons/day. Speed adjustable from 60-500 rpm. Roller size 400mm dia x 1000mm long. Physical size 2060 x 2450 x 2450mm, weight 6000 kg. 15kw X 2 main motors +0.55kw feeder. Idled 2006
The Zhuanghee YPSG40 cracking mill (commonly referred to in international trade markets as the YPSG series double-pair tooth roller cracker/peeler) is a heavy-duty industrial pretreatment machine primarily designed for oilseed crushing and extraction plants
Asset ID: P107
Available: 1
Cracking Mill
Cracker rolling mill - sized for 300 tons/day. Speed adjustable from 60-500 rpm. Roller size 400mm dia x 1000mm long. Physical size 2060 x 2450 x 2450mm, weight 6000 kg. 15kw X 2 main motors +0.55kw feeder....
Flaking Mill
Asset ID: P112
Available: 1
Hydraulic flaking roller mill (Presser). Flaker Size 2 x 800mm x 125mm turning at 240 rpm. Motors missing (was 37kw) . Process capacity 160-200 tpd. Output flakes 0.25 to 0.35mm. Overall size 1970L x 1640W x 2386H., weight 12 ton 37kw X2, 0.55kw+1.1kw
The YYPY2 series hydraulic flaking mill is heavy-duty industrial processing equipment used primarily in vegetable oil extraction and grain pretreatment plants to flatten oilseeds like soybeans, peanuts, and cottonseed into uniform flake
Asset ID: P112
Available: 1
Flaking Mill
Hydraulic flaking roller mill (Presser). Flaker Size 2 x 800mm x 125mm turning at 240 rpm. Motors missing (was 37kw) . Process capacity 160-200 tpd. Output flakes 0.25 to 0.35mm....
Seed Conditioner Cooker
Asset ID: P0115
Available: 1
Vertical seed conditioner (cooker). Jacketed, seven trays. Body atmospheric at 200C, material Q235-A. Jacket pressure 1.2 Mpa at 200C. Rotating speed 13 rpm. Motor 55 KW (75HP) 60/3.. Incudes cooker agitatorFlender vertical agitator for vertical cooker. 55kw motor (asset record P115B). Idled in 2006
Asset ID: P0115
Available: 1
Seed Conditioner Cooker
Vertical seed conditioner (cooker). Jacketed, seven trays. Body atmospheric at 200C, material Q235-A. Jacket pressure 1.2 Mpa at 200C. Rotating speed 13 rpm. Motor 55 KW (75HP) 60/3.. Incudes cooker agitatorFlender vertical agitator for vertical cooker. 55kw motor (asset record P115B)....
Meal Cooler w/ Cyclones
Asset ID: P131
Available: 1
## Geelen Meal Cooler, Vertical Gravity Flow ##
Counterflow Meal cooler type 010226, serial 5176-01-2002. model VK19x24KL. With cyclone 6 ft dia x 5 ft shell (top dia is 2ft). 32" tall. Includes blower fan, ducting, cyclone.
- Dimensions: The "19x24" designation indicates an internal deck/bin dimension of 1.9 meters by 2.4 meters.
- KL (Swivel Valve): Typically signifies that the unit utilizes Geelen's hydraulic swivel valve discharger mechanism. This grid is designed to handle products of varying shapes and sizes cleanly without clogging or product damage
- Counterflow Efficiency: Air is drawn upward from the bottom while the hot product travels downward via gravity. This provides highly efficient heat transfer, using up to 30% less cooling air and 50% less footprint compared to horizontal belt coolers.
- Evaporation & Moisture Control: Cools products to within 5°C of ambient temperature while managing moisture evaporation to optimize product quality and density.
- Hygienic Design: Features a vertical gravity-flow setup that minimizes dust build-up and completely eliminates horizontal surfaces, drastically reducing cross-contamination risk
Priced for complete system.
Asset ID: P131
Available: 1
Meal Cooler w/ Cyclones
## Geelen Meal Cooler, Vertical Gravity Flow ## Counterflow Meal cooler type 010226, serial 5176-01-2002. model VK19x24KL. With cyclone 6 ft dia x 5 ft shell (top dia is 2ft). 32" tall. Includes blower fan, ducting, cyclone....
Seed Cleaner Shaker
Asset ID: P111
Available: 2
Seed cleaner screener with cyclone and blower – carbon steel. Sieve size 150w x 200L cm. Capacity for cleaning 100 t/h. Air consumption 160 m3/min at 50 mmH2O. Quantiry (2) - priced separately
Asset ID: P111
Available: 2
Seed Cleaner Shaker
Seed cleaner screener with cyclone and blower – carbon steel. Sieve size 150w x 200L cm. Capacity for cleaning 100 t/h. Air consumption 160 m3/min at 50 mmH2O. Quantiry (2) - priced separately
Dehuller
Asset ID: 2344
Available: 1
### Impact Dehullers ###
These impact dehuller are custom made to resemble Codema VSH-2096. They are robust and last used in the hemp industry. The builder made it a little easier to clean out. Capacity was approx. 400 lbs./hr. each for whole grain hemp. Other trials suggest that other grains would be 800 lbs./hr. or more, depending on grain. Direct drive by 3 HP motor 1100 rpm 460v 3/60. Idled in 2021. Hullers are 37" tall on top and 51" bottom cone, 32 1/2" wide/diameter. Inside of huller is 27 1/2". Inlet size 4", outlet size 2 x 5" (18 inch center to center). Selling grey/white dehuller only - does not include grader underneath.
Previous use was on hemp, throughput would be around 400lbs per dehuller per hour. They can run other grain.
Qty (1) gray dehuller see pictures..
Asset ID: 2344
Available: 1
Dehuller
### Impact Dehullers ### These impact dehuller are custom made to resemble Codema VSH-2096. They are robust and last used in the hemp industry. The builder made it a little easier to clean out. Capacity was approx. 400 lbs./hr. each for whole grain hemp....
Gravity Separator
Asset ID: 2345
Available: 1
Forsberg Inc. Vacuum Gravity Separator, Model 50V. Carbon steel, and wood construction. 19 Square feet deck area. Driven by a 1/2 hp, 3/60/208-230/460 volt, 1725 rpm motor. Manual speed adjustment. End feed, side discharge with divider blades for heavies, mediums, lights, and cull discharge. Idle since 2021, stored in protected warehouse. serial 5239, Forsberg 50V rated at 6000 lbs/hr for grains, physical size 64" x 106" x 83" tall. Last used for hemp
Asset ID: 2345
Available: 1
Gravity Separator
Forsberg Inc. Vacuum Gravity Separator, Model 50V. Carbon steel, and wood construction. 19 Square feet deck area. Driven by a 1/2 hp, 3/60/208-230/460 volt, 1725 rpm motor. Manual speed adjustment. End feed, side discharge with divider blades for heavies, mediums, lights, and cull discharge....
Grader Drum Screener
Asset ID: 2346
Available: 5
Triple/S thickness graders - drum screener. Idle since 2021. We have 5 total - priced separately
- (3) are Triple/S Dynamics Model E50-1R, serial # CS.7629,7627,7630 (single drums approx 18" dia)
- (1) double screen Triple/S Dynamics E50 double screen grader
- (1) T50 grader.
All have 18 inch drums, all the same size 4.25" - 4.75" slot sized screens. Driven by 460v motor 3/60.1.5 HP and a 1/2 HP on shaker pan.
Asset ID: 2346
Available: 5
Grader Drum Screener
Triple/S thickness graders - drum screener. Idle since 2021. We have 5 total - priced separately - (3) are Triple/S Dynamics Model E50-1R, serial # CS.7629,7627,7630 (single drums approx 18" dia) - (1) double screen Triple/S Dynamics E50 double screen grader - (1) T50 grader....
Flaking Mill
Asset ID: S3155
Available: 1
Roskamp flaking mill SP2800-62 with 150HP motor, rated at 330 tons/day. Has 28 inch diameter x 62 inch long centrifugally cast chilled iron rolls. See brochure in Links. Removed and ready to load, price includes loading onto flatbed truck.
Asset ID: S3155
Available: 1
Flaking Mill
Roskamp flaking mill SP2800-62 with 150HP motor, rated at 330 tons/day. Has 28 inch diameter x 62 inch long centrifugally cast chilled iron rolls. See brochure in Links. Removed and ready to load, price includes loading onto flatbed truck.
Cracking Mill
Asset ID: S3164
Available: 1
Ferrell Ross double stack cracking mill 12x52. Roller mill Cracker is rated at 825 tons/day. Unit has been removed - ready for loading. Price includes loading on a flatbed.
Asset ID: S3164
Available: 1
Cracking Mill
Ferrell Ross double stack cracking mill 12x52. Roller mill Cracker is rated at 825 tons/day. Unit has been removed - ready for loading. Price includes loading on a flatbed.
Soybean Extrusion Line Wenger
Asset ID: PK-5055
Available: 1
### Soybean Extrusion Line by Wenger - NEW, Never Installed ###
Designed to process soy white flakes into textured soy protein at 1600 kg/hr. Can produce blown, chunks, flakes, or mince as a flour or concentrate. This system is new – never installed. Still in original packaging stored indoors. System is still supported by Wenger and they are available to help with installation, commissioning, and training.
Flours are made from defatted soy flour having protein content no less than 52%, crude fiber content no greater than 3%, oil content no greater than 1%, and protein dispensability index (PDI) between 50 and 70%, and particle size 100% passing US 80 mesh standard sieve.
Concentrates are made from from soy concentrate having protein content of no less than 68%, crude fiber content no greater than 4%, oil content no greater than 1%, and particle size 100% passing US 80 mesh standard sieve.
**Includes**
- Dump Stations
- Dry Material Feeders
- Raw Material Mixing System
- Sifter
- Wenger Model 115 Mag ST Twin Screw Extruder with 450 HP motor
- Wenger Model 450 High Intensity Preconditioner
- Urschel Comitrol Wet Mill
- IPA Flake Mill
- Wenger Modular Design Horizontal Dryer/Cooler
- Vibrating Screener
- Elevating Bucket Conveyor
- Great Western Sifter
- Fines Recovery Conveying System
- Fines Hammermill
- Controls
Does not include:
-Silos
-Storage Tanks
-Metal Detector
-Heated Air System
-Vacuum Conveying System
### See asset PK-5065 for the bagging line that was designed for this system (sold separately).###