Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Cooling tower'
3 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
Cooling Tower 680 ton
Asset ID: 7553
Available: 1
Used BAC Cooling towers, Model VT1-680-PMC. Certified Capacity 680 tons, 1750 USGPM of water from 95F to 85F at 78F entering wet bulb and 0.9 psig spray pressure. (2) 25 HP fan motors, 1800 RPM, 3 phase, 60 Hz, 230/460, standard TEFC enclosure, fan drives based on 0" ESP. Built 1992 Comes in 3 sections.
Asset ID: 7553
Available: 1
Cooling Tower 680 ton
Used BAC Cooling towers, Model VT1-680-PMC. Certified Capacity 680 tons, 1750 USGPM of water from 95F to 85F at 78F entering wet bulb and 0.9 psig spray pressure. (2) 25 HP fan motors, 1800 RPM, 3 phase, 60 Hz, 230/460, standard TEFC enclosure, fan drives based on 0" ESP....
Cooling Tower Fans
Asset ID: BF-9420
Available: 1
Two cooling tower fans - sold as a set. Tower is not moveable - fans and drives only for sale. Fan description: Hudson induced draft fans 14 ft dia - 8 blades, blade type H. Designed for 316,690 cfm. Fan speed 272 rpm. Each fan has a right angle gear unit Amarillo Gear. Driven by 75 HP motor. See links for data sheet and drawing. Used as cooling tower blades for DDE Evap. Qty (2) - priced for the set
Asset ID: BF-9420
Available: 1
Cooling Tower Fans
Two cooling tower fans - sold as a set. Tower is not moveable - fans and drives only for sale. Fan description: Hudson induced draft fans 14 ft dia - 8 blades, blade type H. Designed for 316,690 cfm. Fan speed 272 rpm. Each fan has a right angle gear unit Amarillo Gear....
Cooling Tower & Pump 60 ton
Asset ID: 2056
Available: 1
CTS cooling tower and recirculating pump. This is a counter flow induced draft FRP water cooling tower. Tower has a 1.5 HP fan and 1HP condenser. The nameplate is worn off but this is most likely a T-260 tower rated at 60 tons. Cooling capacity 900,000 BTU/hr, air volume 14,700 cfm. Tower size approx 78" dia x 74" tall. Water circulating pump is approx 77.5 gpm with a Bell & Gossett size e-1532 size 2BD, pump construction SSF impeller dia 8" serial number C286138-01G91 with a 5HP motor 1800 rpm. This is an end suction close coupled foot mounted pump. See link for pump specs and tower specs (most likely the right model number). Part of Gryphon biomass drying system asset 2042 - NOT sold separately. Part of an entire CBD extraction system - enter PK6020 to see all components.