Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Membrane'
3 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
Membrane Filter Press 1000sf
Asset ID: 5547
Available: 1
**Membrane Filter Press** 6 bar (90 psi) and 1000 sf surface area. With hydraulic press and polypropylene plates. Supplied by DeSmet, built by Welders. Built 1985. Model OMF-1200, S/N 81630. 1000 square ft. filter area. 3" inlet/outlet. 51" W x 24' L x 90" H. Bed is 15' long. Uses 47" x 47" x 3.5" polypropylene plates. 64 plates included. Built for 6 bar (90 psi). 5.5kW, 440V, 3 Phase 50 Hz. Ram Info: Model CE 200.140.900KT5A. Co. No. 406383. Design No. 114357C. 900mm length. Includes manual for installation, operation, and maintenance. This filter will need new controls - we can furnish if desired. Price includes removal & loading. Available immediately.
Asset ID: 5547
Available: 1
Membrane Filter Press 1000sf
**Membrane Filter Press** 6 bar (90 psi) and 1000 sf surface area. With hydraulic press and polypropylene plates. Supplied by DeSmet, built by Welders. Built 1985. Model OMF-1200, S/N 81630. 1000 square ft. filter area. 3" inlet/outlet. 51" W x 24' L x 90" H. Bed is 15' long....
Reverse Osmosis Membrane Filter
Asset ID: 2028A
Available: 1
### Reverse Osmosis RO Membrane Filter System ###
Material specs are 316 stainless. Tanks are 304 stainless. Includes controls and HMI. Designed for flow rate of 50-60 gpm at 150 - 250 psig. Membranes not included. Last used on well water - removed and stored in controlled warehouse, ready for loading
**Three stage**
- Stage One has (18) 4" vessels, 5 elements per
- Stage Two has (18) 4" vessels, 5 elements per
- Stage Three has (12) 4" vessels, 5 elements per
**Includes 6 pumps. All 6 pumps driven by VFDs**
- (3) recirculation pumps (40HP, 40HP, 20HP)
- (3) feed pumps (30HP each)
**Tanks**
- One Feed tank 500 gallons and two smaller tanks (perm & conc) at 120 gallons each.
**Controls and HMI incuded**
Asset ID: 2028A
Available: 1
Reverse Osmosis Membrane Filter
### Reverse Osmosis RO Membrane Filter System ### Material specs are 316 stainless. Tanks are 304 stainless. Includes controls and HMI. Designed for flow rate of 50-60 gpm at 150 - 250 psig. Membranes not included....
Solvent Recovery Membrane Skid
Asset ID: V2267
Available: 1
SciPhy solvent recovery, dewaxing, and color remediation system. Rated at 60 gph. Membrane skid still in crate, includes compressor and pneumatic motor and tank. This is an. affordable nanofiltration membrane recovery system (OSN)
- Complete Control Over Product Purity: The X-Spiral gives operators full control over concentration of solution.
- No Solvent Phase Change: Creates greatly reduced energy use that lowers operating expenditure and raises profit margins.
- All In One Skid Including Utilities: No boiler or cooling tower necessary means greatly reduced startup and commissioning time.
- Highly Efficient: Unique dual pump system only uses a third of the energy of other single pump systems.
- Full Parameter Control. Design features and mounted HMI provide ease of use and optimal workflow.
- Affordable Membranes. X-Spiral uses lower cost membranes than many competitors.