Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Evaporator'
9 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
)
)
Thin Film Evaporator Dryer
Asset ID: 7112
Available: 1
## Cherry Burrell Thin Film Evaporator ##
Thin film evaporator model 36-144. Used Turba Film Processor wiped film evaporator. Scraped surface area 106 sq ft. Model 36-144, serial 35463EA, mfg number A4128. All contact surfaces are 304 stainless steel. Has 2 sections, designed for steam in jacket. ASME MAWP shell FV at 400F, jacket 150 psig at 400F. Nat'l Bd# 925. Driven by 40 HP motor 1182 rpm in/260 rpm at dryer.
- ***Capacity depends on moisture and feed***. In general this evaporator can evaporate 30 pounds of water per hour per sq ft surface area. This evaporator has 106 sq ft surface area so it should be able to evaporate up to 3,180 pounds of water/hr. It was operating on lecithin (gums) drying and was doing 10 TPD (833 #/hr).
- The jacket passed hydrotest April 2023.
- Physical size 36" dia x 144" tall for 252 inches OAH. Weight of dryer only empty 13,200 pounds. Parts of a 3-stage steam ejector barometric vacuum system are available As Is - On pallet
- This evaporator is the one on the right (without the blue writing)
- We can sandblast and prime for $1500 extra
- Equipment has been removed and is ready to load on your truck - price includes removal & loading. Sold As Is - We can also offer reconditioned state. RD-78
Asset ID: 7112
Available: 1
Thin Film Evaporator Dryer
## Cherry Burrell Thin Film Evaporator ## Thin film evaporator model 36-144. Used Turba Film Processor wiped film evaporator. Scraped surface area 106 sq ft. Model 36-144, serial 35463EA, mfg number A4128. All contact surfaces are 304 stainless steel....
Thin Film Evaporator Dryer
Asset ID: 7135
Available: 1
Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Scraped surface area 106 sq ft. Model 36-144, S/N 35465EA, Mfg # A4154. All contact surfaces are 304 stainless steel. Has 2 sections, designed for steam in jacket. ASME MAWP shell FV at 400F, jacket 150 psig at 400F. Nat'l Bd# 927. Belt Driven by 40 HP motor 1182 rpm in/260 rpm at dryer (missing motor). Capacity depends on moisture and feed - on lecithin (gums) drying it was doing 10 tpd (833 #/hr). Physical size 36" dia x 144" tall for 252 inches OAH. Weight of dryer only empty 13,200 pounds. Equipment has been removed and is ready to load on your truck - price includes removal & loading. We can also offer in reconditioned state.
Asset ID: 7135
Available: 1
Thin Film Evaporator Dryer
Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Scraped surface area 106 sq ft. Model 36-144, S/N 35465EA, Mfg # A4154. All contact surfaces are 304 stainless steel. Has 2 sections, designed for steam in jacket....
Thin Film Evaporator Dryer
Asset ID: 7141
Available: 1
Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Serial no. A4156. Scraped surface area 106 sq ft. Model 36-144. All contact surfaces are 304 stainless steel. Has 2 sections, designed for steam in jacket. ASME National Board # 929., ASME MAWP shell FV at 400F, jacket 150 psig at 400F. Direct Driven through a Nord 6.74:1 gear reducer by 40 HP motor 1182 rpm in/260 rpm at dryer. Has a standard mechanical seal. Capacity depends on moisture and feed - on lecithin (gums) drying it was doing 10 tpd (833 #/hr). Physical size 36" dia x 144" tall for 252 inches OAH. Weight of dryer only empty 13,200 pounds. Equipment has been removed and is ready to load on your truck - price includes removal & loading. We can also offer in reconditioned state.
Asset ID: 7141
Available: 1
Thin Film Evaporator Dryer
Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Serial no. A4156. Scraped surface area 106 sq ft. Model 36-144. All contact surfaces are 304 stainless steel. Has 2 sections, designed for steam in jacket....
Evaporator Condenser ss
Asset ID: ET-4202
Available: 1
Evaporative condenser: Evaporator by Thermal Kinetics. Size 4.5' dia x 50' s/s on 8' cs skirt. OAH approx 60'. Capacity 45.1 MMBTUH, Material ss304L. Design: Tubes FV/25psig, 150F; Shell: FV/75psig, 200F. Used as Thermal Kinetics 3rd and 4th Stage/Second Effect Evaporator. Installed and tested 2009 - never ran. Idle since then
Asset ID: ET-4202
Available: 1
Evaporator Condenser ss
Evaporative condenser: Evaporator by Thermal Kinetics. Size 4.5' dia x 50' s/s on 8' cs skirt. OAH approx 60'. Capacity 45.1 MMBTUH, Material ss304L. Design: Tubes FV/25psig, 150F; Shell: FV/75psig, 200F. Used as Thermal Kinetics 3rd and 4th Stage/Second Effect Evaporator....
Falling Film Evaporator
Asset ID: 380-EQ-870
Available: 1
Evaporator rated at 45,000 lbs/hr. Unitech Titanium falling film evaporator manufactured in 1993 but unused until 2008 then operated for approximately 9 months. Includes Incoloy 825 vapor body, 15,862 SqFt heat transfer section with 872 Grade 2 Titanium 2 inch OD tubes x 36 ft long; and MVR compressor driven by a 500HP motor. Design train capacity is 92 GPM, distillate flow 83.95 gpm. This converts to 44,457 lbs/hr water evaporation. This is the Evaporator and structure only - Part of Evaporator package PK-6045 and might not be able to be sold separately - Ask Us. For a list of all components, enter "pkevap" in the keyword search terms box.
Asset ID: 380-EQ-870
Available: 1
Falling Film Evaporator
Evaporator rated at 45,000 lbs/hr. Unitech Titanium falling film evaporator manufactured in 1993 but unused until 2008 then operated for approximately 9 months....
DeHydration Unit
Asset ID: 6227
Available: 1
Wintek Corporation DeHydration Unit. Like NEW - only 31 run hours!! This DeHy is a flash tower with condensate/receiver and vacuum system. Capacity feed content is designed for 12 to 21 gpm feed oil with up to 0.25% water. - based on soy oil modeled as a triglyceride. System consists of feed heat exchanger, a flash tank, a transfer pump, a pre-condenser, receiver tank with transfer pump, and a 10HP liquid ring vacuum system. Flash tower is cs 16 inch dia. DeHydration Unit is used to remove the water from your feed oil. When hot feed oil is exposed to a high vacuum, the water will flash into water vapor and be removed by the vacuum system. This system is skidded - removed and ready to load. Loading fee may apply depending on customer requirements and destination. See complete dehy design specs in attached file (link)
Asset ID: 6227
Available: 1
DeHydration Unit
Wintek Corporation DeHydration Unit. Like NEW - only 31 run hours!! This DeHy is a flash tower with condensate/receiver and vacuum system. Capacity feed content is designed for 12 to 21 gpm feed oil with up to 0.25% water. - based on soy oil modeled as a triglyceride....
Methanol Dehydration Unit
Asset ID: 1760
Available: 1
Molecular Sieve Dehydration Unit (MSDU) - Wintek methanol distillation recovery unit used in biodiesel plant. Model MSDU-M02.05, serial 110401. Molecular sieve beads can be regenerated when saturated
Asset ID: 1760
Available: 1
Methanol Dehydration Unit
Molecular Sieve Dehydration Unit (MSDU) - Wintek methanol distillation recovery unit used in biodiesel plant. Model MSDU-M02.05, serial 110401. Molecular sieve beads can be regenerated when saturated
Rotary Evaporator, Lab Size 50L
Asset ID: 2354
Available: 1
### Vertical Condenser Rotary Evaporator 50L ###
- 50L Rotary Evaporator - voltage 220 single phase
- Chiller DLSB-50/30, voltage 220v single phase.
- Rotate speed 0-122 rpm
- Very few hours
- Spare parts package- Does not include vacuum pump
The rotary evaporator can be rotated under constant temperature and under negative pressure to form a film, and is condensed and recovered in the evaporation solvent. It is especially suitable for concentration, crystallization, separation and recovery of heat sensitive materials. It is an important equipment for scientific research, pilot test and production in bio-pharmaceutical, chemical, food and other industries.
Asset ID: 2354
Available: 1
Rotary Evaporator, Lab Size 50L
### Vertical Condenser Rotary Evaporator 50L ### - 50L Rotary Evaporator - voltage 220 single phase - Chiller DLSB-50/30, voltage 220v single phase....
Evaporator System, 4-effect
Asset ID: 2114
Available: 1
### Rosenblad Multi-Effect Evaporator System ###
4 Effect Evaporation System With a Stripper-Condenser and Thermal Oxidizer
Effect Evaporators & Stripper Condenser Evaporators with 4 Effects. 1st effect has 3 effects inside to provide continuous operation while washing. Effects use Lamella style plates. Rosenblad falling film plate technology for continuous concentration of customer’s specialty weak liquor solution. Material all 304 Stainless Steel. See links for details of system
**Design Conditions**
- Evaporation Rate 152,169 lbs/hr.
- Feed Liquor Flow Rate 220,200 lbs/hr (approx 400 gpm)
- Feed Liquor Concentration 12.0% TDS, Feed Liquor Temperature 150 °F
- Estimated methanol content 600 mg MeOH L (liquor)
**Product Liquor**
- Product Liquor Flow Rate Outlet 48,031 lbs/hr
- Product Liquor Concentration 50% TDS, Product Liquor Temperature 214.0 °F
**Steam Consumption and Economy**
- Steam to the First Effect 41,950 lbs/hr
- Steam pressure (Minimum) 21.8 psia (233F)
- Steam Economy 3.63
**Cooling Water and Air**
- Cooling Water Flow Rate 2,564 gpm
- Cooling Water Inlet Temperature 80f, Outlet 113F
- Air pressure for automated valves (Min) 90 psig
**Power Consumption**
- Power Consumption for the (9) pumps 178.85 kW (240 HP)
**Thermal Oxidizer**
- Destroys 99.9% of separated methanol and NCG streams