Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Dryer'
9 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
)
)
Rotary Steam Dryer
Asset ID: 5380
Available: 1
96 inch dia Davenport Rotary Steam Dryer. Used Rotary Counter Flow Steam Tube. Shell & tube: 304 stainless steel. 104” OD x SCH.10. Pitch 0 DEG to 32 DEG. 46’9 O.A.L. 30HP motor, 349 RPM. Batch capacity: 80,000 lbs./hr. Shell rated for 1 ATM of pressure @ 370F. Tube rating 175PSIG @ 370F. Steam Rating: 130PSIG. Manufactured by Davenport. Previous Use: PTA Dryer.
Asset ID: 5380
Available: 1
Rotary Steam Dryer
96 inch dia Davenport Rotary Steam Dryer. Used Rotary Counter Flow Steam Tube. Shell & tube: 304 stainless steel. 104” OD x SCH.10. Pitch 0 DEG to 32 DEG. 46’9 O.A.L. 30HP motor, 349 RPM. Batch capacity: 80,000 lbs./hr. Shell rated for 1 ATM of pressure @ 370F. Tube rating 175PSIG @ 370F....
Biomass Belt Dryer Gryphon
Asset ID: 2042
Available: 1
## **Gryphon Biomass Hot Air Belt Dryer** ##
- Gas fired recirculating counter current air dryer. Model A.318.
- Dryer section is 3 ft wide x 18 ft long.
- Evaporation rate (condensate rate) will be approximately 213 lbs/hr of water
- Used for drying hemp with inlet moisture of 50-80% and outlet moisture of 7% to 11% moisture running at 3,000 pouds per 24 hours inlet and approximately 1,000 pounds per 24 hours dry mass outlet.
- Natural gas burner rated at 1.5 MMBTU with all gas train valves, firing controls and Honeywell fire eye safeties. Supplemental electric heaters in each of the three sections.
- Air flow is by blower rated at 2500 scfm with VFD drive AB PowerFlex 753. AirPro Fan Type HPSM254 high pressure radial shrouded fan. 600 rpm serial 23894 40HP built on 2008.
- Six VFD drives in all Allen Bradley PowerFlex 525.
- Condenser coils.
- Includes infeed sifter and lid lift assembly for easy maintenance and operation.
- Includes fabricated feed belt 23.625" wide cleated belt.
- Full automation by Rockwell Allen Bradley and controls provided. Software plc controlled air volume, temperature and cycle time. Automated washing of chambers, air filter, and belt.
- CTS cooling tower and condenser unit is part of the package.
No need for baghouses, scrubbers, or exhaust stacks. See brochure in link for more information. Unit was purchased new in 2019 - only has 1,289 hours operation. Last used for hemp drying. Includes spares: (4) condenser filters, 1 dryer belt, bed skirts & spacers. Part of an entire CBD extraction system - enter PK6020 to see all components.
Asset ID: 2042
Available: 1
Biomass Belt Dryer Gryphon
## **Gryphon Biomass Hot Air Belt Dryer** ## - Gas fired recirculating counter current air dryer. Model A.318. - Dryer section is 3 ft wide x 18 ft long....
Swirl Fluidizer Flash Dryer System Niro
Asset ID: AF94
Available: 1
### GEA Niro Swirl Fluidizer System - Flash Dryer ###
Complete skid with inlet air gas heater, fluidizing slurry tank, controls. This is an agitated flash dryer. GEA Model 6.3 Mobile Unit, ID No. 128-1650-1-01 built in 2009. Stainless steel skid size 86" x 87" x 82" tall. Fluidizing slurry tank stainless is approx 3 ft dia x 3 ft tall with bottom scraped-wall blade agitator and outlet to screw conveyor.
- Air flow 450-630 kg/hr
- Inlet temp 100-350C
- Outlet temp 60-150C
- Water evaporation 0-55 kg/hr
- Max powder rate 100 kg/hr
- Max feed rate 150 kg/hr
- Gas supply natural gas or propane
Used for drying cellulose pastes prior to filtration. In feed tank, the vertical bottom driven agitator will disintegrate the viscous feed material into homogeneous feed. A specialized auger then pushes the slurry to the drying chamber. The Niro SWIRL FLUIDIZER™ offers a cost-effective solution for drying of pastes, filter cakes, and highly viscous liquids for obtaining a fine, homogeneous and non-agglomerated dry product – in one compact process step.
### See detailed presentation in the Document Links ###
Asset ID: AF94
Available: 1
Swirl Fluidizer Flash Dryer System Niro
### GEA Niro Swirl Fluidizer System - Flash Dryer ### Complete skid with inlet air gas heater, fluidizing slurry tank, controls. This is an agitated flash dryer. GEA Model 6.3 Mobile Unit, ID No. 128-1650-1-01 built in 2009. Stainless steel skid size 86" x 87" x 82" tall....
Air Dryer, Regenerative Desiccant
Asset ID: B2098
Available: 1
Hankison heatless regenerative air dryer Model DH-950. Rated at 590 scfm, 100 psig at -40 PDP. Desiccant activated alumina. S/N 3338-1-9505-13SD. Desiccant tanks ASME MAWP 250 psig at 200F.
Asset ID: B2098
Available: 1
Air Dryer, Regenerative Desiccant
Hankison heatless regenerative air dryer Model DH-950. Rated at 590 scfm, 100 psig at -40 PDP. Desiccant activated alumina. S/N 3338-1-9505-13SD. Desiccant tanks ASME MAWP 250 psig at 200F.
Air Dryer, Regenerative Desiccant
Asset ID: 1933
Available: 1
Atlas Copco heated regenerative desiccant compressed air dryer rated for 150 psig and a pressure dew point of -40C/-40F. Twin towers. Skid mounted. Air flow approx 1100 cfm. ASME Nat'l Bd # 13082 MAWP 159.5 psi at 662 F. Serial No. CMGBD3A06R12. Was in operational condition when idled in 2019. See dryer brochure and specs under Document LinksAir Dr
Asset ID: 1933
Available: 1
Air Dryer, Regenerative Desiccant
Atlas Copco heated regenerative desiccant compressed air dryer rated for 150 psig and a pressure dew point of -40C/-40F. Twin towers. Skid mounted. Air flow approx 1100 cfm. ASME Nat'l Bd # 13082 MAWP 159.5 psi at 662 F. Serial No. CMGBD3A06R12. Was in operational condition when idled in 2019....
Rotary Steam Dryer ss
Asset ID: PK-2347
Available: 1
### Rotary Drum Steam Dryer stainless steel ##
Rated at 1500 lbs/hr capacity with co-current single-pass superheated steam. Approx conveying air feed 1,973 acfm at 266F to 288F. (Max inlet temp 680F). Last was running soybean meal
- Evaporation rate 900 lb/hr. Set for 65% moisture IN and 5% moisture OUT at 1500 lb/hr feed rate.
- Dryer drum size is 1800 mm dia x 14750 mm drum length (5.9 ft dia x 48.4 ft length). Co-current flow. MOC stainless steel 304L. Cup flights around the perimeter - hollow middle
- Natural gas fired burner with controls and fire-eye, Blower, belt drive. Rated at 7.3 MMBTU/hr
- This is a steam dryer set up for either steam injection or water injection. Steam heated by hot air intrchanger to 680F. Steam usage 4087 lbs/hr at 266F (approx 25 psig)
- Cyclone and vertical condenser
- Drag conveyer and 3 screw conveyors
- All controls including plc and touch screen HMI built into panel
- Electrical 200 amp service 460v. Starters and VFD's are located in the control cabinet. There are 4 VFD's. 60HP blower, 60HP conveying fan, 40 HP burner, 40HP drum motor.
- Footprint of entire system 19950 mm x 11110 mm x 5000 mm tall (65.4 ft x 36.4 ft x 16.4 ft tall)
In good operating condition. Idled in mid 2022. Tested operation again for 2 weeks in Aug 2024. See drawings in LINK
Asset ID: PK-2347
Available: 1
Rotary Steam Dryer ss
### Rotary Drum Steam Dryer stainless steel ## Rated at 1500 lbs/hr capacity with co-current single-pass superheated steam. Approx conveying air feed 1,973 acfm at 266F to 288F. (Max inlet temp 680F). Last was running soybean meal - Evaporation rate 900 lb/hr....
Vacuum Dehydration Unit
Asset ID: 2087
Available: 1
### Vacuum Dehydration Unit ###
Compact vacuum dehydration unit to remove free water, emulsified water, and minor impurities from oil. Designed for most lubricating, EHC and hydraulic fluids down to 150 ppm. Possible to use for dewatering used cooking oil (UCO) upon proper testing and approval. Standard features: 300 gph process flow rate, 5kW heater with programmable temperature controller, dry seal vacuum pump,, adjustable flow controls, skid mounted with casters, controls. 440v 3/60. These units are built to order - allow 10-12 weeks ARO. Photo is a catalog photo.
Asset ID: 2087
Available: 1
Vacuum Dehydration Unit
### Vacuum Dehydration Unit ### Compact vacuum dehydration unit to remove free water, emulsified water, and minor impurities from oil. Designed for most lubricating, EHC and hydraulic fluids down to 150 ppm. Possible to use for dewatering used cooking oil (UCO) upon proper testing and approval....
Spray Dryer, Pilot 22 lb/hr
Asset ID: 2110
Available: 1
### Spray Dryer-Small Scale. NEW. Never used. Still in Crates ###
Manufactured by Hemraj. Model PSD-02
Suitable for pilot plant or semi-works.
- Evaporation capacity 5 to 10 kg/hr water (11 to 22 lb/hr evap rate)
- Can operate co-current or counter current
- Volume of dryer is 1687 L (450 gallons)
- Air Flow 450 cu m/hr
- Atomizer: Includes two - pressure nozzle and two-fluid nozzle. Pressure nozzle diameter 1mm. Compressor pressure in case of two-fluid nozzle is 8 bar max.
- Peristaltic pump
- Stainless steel (316L) including the supporting structure
- Electrical heater 20 KW
- 20KW maximum heating power. Inlet temp. 200C, maximum 300C
- Dimensions given are for the spray dryer vessel.
NOTE: We have packing lists, crate sizes, wiring diagrams, and other information. Call or email us.
Asset ID: 2110
Available: 1
Spray Dryer, Pilot 22 lb/hr
### Spray Dryer-Small Scale. NEW. Never used. Still in Crates ### Manufactured by Hemraj. Model PSD-02 Suitable for pilot plant or semi-works....
Fluid Bed Dryer
Asset ID: 8411
Available: 1
### Fluid Bed Dryer ###
Fluid bed dryer design rate 4,244 lb.hr with infeed moisture at 20% by wt, and final product output at 3% by wt.
- Evap capacity 744 lb/hr
- Comenco systems duct heater/burner and control panel. Model DH-65-4-0-NPO. Serial # 91322. Runs on natural gas. Maximum input 4,000,000 BTU / h.
- Bed size 3 ft x 12 ft static fluid bed
- Induced Draft Fan: Located at Cyclone at top. Air Blower Twin Cities Size 921-CW driven by 75 HP motor 1475 rpm 460v 3/60. Rated at 15,879 cfm at 13" sp. FANC/03
- Forced Draft Fan (inlet) Fan missing but housing and inlet ducting is still there: WAS 50HP 1800 rpm 460v 3/60 Twin Cities Air Blower 7897 cfm at 16 sp. Inlet fan FANC/01
- Forced Draft Cooler Fan: 20HP 1800 rpm 460v 3/60 Twin Cities air blower 3039 cfm at 12 sp Outlet Fan FANC/02
- (4) Sifter Screen Units. Tru-Balance (2) 40 7/8" sq, (2) 30 7/8" sq
- Carbon steel construction
- Ducting included
- Price quoted is removed and loaded on truck.
Last used for corn germ drying - product density at 32 PCF. See Specs in Links.
Last Ran in 2011 - Was functional when shut down