Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Air compressor'
5 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
Air Compressor, Recip plus Dryer
Asset ID: 2052
Available: 1
### Reciprocating air compressor and refrigerated dryer ###
Emax air compressor, sits on top of its own 80 gallon air receiver. Driven by 7.5 HP motor, 220v 1 phase. Maximum 175 psi and 26 scfm. Includes refrigerated air dryer refrigerant is 134A. Refrigerated dryer is EMAX Model EDRCF1150030. pk6020
Asset ID: 2052
Available: 1
Air Compressor, Recip plus Dryer
### Reciprocating air compressor and refrigerated dryer ### Emax air compressor, sits on top of its own 80 gallon air receiver. Driven by 7.5 HP motor, 220v 1 phase. Maximum 175 psi and 26 scfm. Includes refrigerated air dryer refrigerant is 134A....
Air Compressor, Recip 2HP
Asset ID: 2066
Available: 1
Ingersoll Rand recip air compressor Model P1.5IU-A9, serial P20288T19051. Capacity 4.6 cfm at 135 psig. Voltage 115/1/60 2HP. With integral reservoir tank 20 gallons. Overall size 23" wide x 43" tall. Belt driven quiet operation 75 dBA. This is part of gryphon CBD dryer system belt tensioner and NOT SOLD Separately. Part of an entire CBD extraction system - enter PK6020 to see all components.
Asset ID: 2066
Available: 1
Air Compressor, Recip 2HP
Ingersoll Rand recip air compressor Model P1.5IU-A9, serial P20288T19051. Capacity 4.6 cfm at 135 psig. Voltage 115/1/60 2HP. With integral reservoir tank 20 gallons. Overall size 23" wide x 43" tall. Belt driven quiet operation 75 dBA....
Air Compressor 125HP
Asset ID: B2101
Available: 1
Gardner Denver Electra Saver Stationary Base Mounted Screw Air Compressor. Model EAQQNC, Air delivery approx 574 cfm at 125 psi. ser. Num U32537. Skid mounted, air cooled, no enclosure. Hours unknown but slightly over 147,000 hours. Driven by 125HP Weg Motor. We have manuals
Asset ID: B2101
Available: 1
Air Compressor 125HP
Gardner Denver Electra Saver Stationary Base Mounted Screw Air Compressor. Model EAQQNC, Air delivery approx 574 cfm at 125 psi. ser. Num U32537. Skid mounted, air cooled, no enclosure. Hours unknown but slightly over 147,000 hours. Driven by 125HP Weg Motor. We have manuals
Air Compressor
Asset ID: 1932
Available: 1
Atlas Copco rotary screw air compressor. GA180W-VSD-FF. S/N AIF.120067. Max Working Pressure: 13.55 bar (196 psig). Built in 2007. Flexible pressure selection with VSD reduces electricity costs. Electronikon controls. Motor HP 220 HP, capacity approx 930 cfm. Noise suppressing cabinet to approx 78 dB(A). The GA FF (Full Feature) is a ready-to-use, compact package with an integrated refrigerant adsorption dryer that guarantees a pressure dewpoint of 3°C/37°F (100% relative humidity at 20°C/68°F). All the wires and pipes are assembled in the factory, so there is no need for additional installation work.
- This compressor was in good operating condition when shut down and idled in 2019. It was replaced because it was no longer large enough to support the needs of the plant. A few panels are missing. See compressor specifications in Document Link.
Asset ID: 1932
Available: 1
Air Compressor
Atlas Copco rotary screw air compressor. GA180W-VSD-FF. S/N AIF.120067. Max Working Pressure: 13.55 bar (196 psig). Built in 2007. Flexible pressure selection with VSD reduces electricity costs. Electronikon controls. Motor HP 220 HP, capacity approx 930 cfm....
Air Compressor
Asset ID: 1951
Available: 1
### Atlas Copco rotary screw air compressor 930 cfm ###
- Model GA160W-FF. S/N AIF.120333. Single stage oil injected full featured compressor.
- This is a load/unload compressor, not a variable speed drive (VSD)
- The GA FF (Full Feature) is a ready-to-use, compact package with an integrated refrigerant adsorption dryer that guarantees a pressure dewpoint of 3°C/37°F (100% relative humidity at 20°C/68°F). All the wires and pipes are assembled in the factory, so there is no need for additional installation work. Max working pressure 8.85 bar (128 psig)
- Electronikon controls.
- Motor HP 220 HP (160KW)
- Noise suppressing cabinet to approx 78 dB(A).
This compressor was in good operating condition when shut down and idled in 2019. It was replaced because it was no longer large enough to support the needs of the plant. A few panels are missing.