Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Presses'
9 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
)
)
Screw Press 60-70 TPD
Asset ID: 8403
Available: 1
Krupp EP-07 Press, used. We have primed and painted and cleaned it inside and out so the press actually looks as good as if it had been rebuilt. Used As Is, The last application was soybeans where it was running at a capacity of 60-70 TPD on extruded soybean material. Solid Shaft. Discharge has Lump Breaker installed. The press comes with 150 H.P. motor 230/460v 3/60, V-belt drive with pulley. Capacity up to 75 to 80 TPD. It has been setup for a full pressing application but was originally a pre-press and should be able to reconfigured to that (pre-press) if desired.
Asset ID: 8403
Available: 1
Screw Press 60-70 TPD
Krupp EP-07 Press, used. We have primed and painted and cleaned it inside and out so the press actually looks as good as if it had been rebuilt. Used As Is, The last application was soybeans where it was running at a capacity of 60-70 TPD on extruded soybean material. Solid Shaft....
Press 60 to 95 MTPD
Asset ID: 5450
Available: 2
Shann Full Press Model 9-99RT Serial Numbers 3294-1 and 3294-2. Motor HP 370. Brand New - never used or installed. Capacity at Full Press rated to 60 MTPD on soybean - with extruder ahead of it can do 95 MTPD. All parts are there - complete press. RT design allows the press to be reversed in case of an overload. Quantity (2) sold together as a lot.
Asset ID: 5450
Available: 2
Press 60 to 95 MTPD
Shann Full Press Model 9-99RT Serial Numbers 3294-1 and 3294-2. Motor HP 370. Brand New - never used or installed. Capacity at Full Press rated to 60 MTPD on soybean - with extruder ahead of it can do 95 MTPD. All parts are there - complete press....
Dewatering Press CP-10
Asset ID: P126
Available: 1
Vincent screw press dehydrating press, model CP-10, serial 01198-B. Continuous, rated at 1500-5,000 lbs/hr screw rpm 16, motor HP 15 460v 3/60. Physical size approx 11 ft long x 2 ft wide x 3 ft high. Weight 2700 lbs. Used for decanter solids residual liquid removal. Built 2002, idled 2006
Asset ID: P126
Available: 1
Dewatering Press CP-10
Vincent screw press dehydrating press, model CP-10, serial 01198-B. Continuous, rated at 1500-5,000 lbs/hr screw rpm 16, motor HP 15 460v 3/60. Physical size approx 11 ft long x 2 ft wide x 3 ft high. Weight 2700 lbs. Used for decanter solids residual liquid removal. Built 2002, idled 2006
Dupps Expeller Press
Asset ID: P118-1
Available: 3
Dupps screw press 12-10-6/S Pressor, high pressure screw press. Each includes 12" feed quill, oil discharge conveyor. Motor 200HP 1785 rpm 460v. Dupps job# 1308. Size 17'-5" long x 64" wide x 92" tall Capacity 3,150 kg/hr (7,000 lb/hr). Quantity (3) - priced separately.
Asset ID: P118-1
Available: 3
Dupps Expeller Press
Dupps screw press 12-10-6/S Pressor, high pressure screw press. Each includes 12" feed quill, oil discharge conveyor. Motor 200HP 1785 rpm 460v. Dupps job# 1308. Size 17'-5" long x 64" wide x 92" tall Capacity 3,150 kg/hr (7,000 lb/hr). Quantity (3) - priced separately.
Screw Press, Sprout Bauer 100 tpd
Asset ID: B2107
Available: 2
Screw Press dewatering press by Andritz Sprout-Bauer Model 575. Main drive Siemens 75 HP motor 460/360 at 1780 rpm. With Falk gear reducer. Capacity approximately 100 short tons per day (tpd) depending on feed stock. Last used for pressing corn germ. See drawing in Links for details. Qty (2) presses - priced separately
Asset ID: B2107
Available: 2
Screw Press, Sprout Bauer 100 tpd
Screw Press dewatering press by Andritz Sprout-Bauer Model 575. Main drive Siemens 75 HP motor 460/360 at 1780 rpm. With Falk gear reducer. Capacity approximately 100 short tons per day (tpd) depending on feed stock. Last used for pressing corn germ. See drawing in Links for details....
Fiber Filter
Asset ID: 2118
Available: 1
### Vincent Fiber Filter Sludge Press 300-1500 gpm ###
Sludge Press manufactured by Vincent. Model EF-30. Stainless Steel, serial number 17590-8. 30HP with a capacity of 300-1500 gpm. Built in 2019 and is presently installed in operation. Serial 17590-8 (Se fiber filter model FF-30)
Featuring fine filtration of high gpm throughputs, the Fiber Filter is a unique machine. It operates continuously with a fabric filter that is vibrated clean by the process flow, requiring only occasional back-flush cycles.
Liquid flows with fiber contents ranging from 0.3% to 1.5% are thickened to a range of 4% to 14% solids with the Fiber Filter. The filtrate liquid is remarkably clear. The Fiber Filter can replace equipment ranging from pre-thickening screens to centrifuges. Fiber Filters can be used both to thicken flow ahead of a screw press and to remove fiber from press liquor. Mechanically the Fiber Filter has a rotating paddle impeller that whirls and pulses the incoming fluid against the inside of a cylindrical filter screen. The filter sleeve, held taught in a frame, is made of a woven polymer fabric. The fabric is available in meshes ranging from 25 microns (0.001") to 300 microns (0.012"). Fabric tension is adjusted from outside the machine, improving sanitation and facilitating operation.*
Asset ID: 2118
Available: 1
Fiber Filter
### Vincent Fiber Filter Sludge Press 300-1500 gpm ### Sludge Press manufactured by Vincent. Model EF-30. Stainless Steel, serial number 17590-8. 30HP with a capacity of 300-1500 gpm. Built in 2019 and is presently installed in operation....
Expander 4.5" Dox Hivex
Asset ID: 1068
Available: 1
Anderson Expander Expeller 4½" DOX/HIVEX with high shear choke. Slotted wall, pilot expander capacity approx 24 to 34 MTPD. Serial number 11665
Incudes Accutherm electric circulation heater. No motor (was sized for 75 HP but not included). Unit only ran for a short time on non-abrasive algae (70% oil).
Oilseed Prep: Anderson developed the Dox/Hivex™ expander, an extrusion based design that crushes the seed materials, cooks them, drains their free oils and fats, and efficiently shears their oil cells for the pressing operation. The Dox/Hivex™ is an Anderson patented processing machine which reduces cooking time from the traditional 45 minutes to a total of 20 seconds
Asset ID: 1068
Available: 1
Expander 4.5" Dox Hivex
Anderson Expander Expeller 4½" DOX/HIVEX with high shear choke. Slotted wall, pilot expander capacity approx 24 to 34 MTPD. Serial number 11665 Incudes Accutherm electric circulation heater. No motor (was sized for 75 HP but not included)....
Expander 200 MTPD
Asset ID: 8819
Available: 2
### Tecnal 8 inch expander ###
Model EXP-205 MLE with 150HP motor. Disassembled. Serial #'s 112/17 & 113/17. Rotation of 165 rpm. Last used for sunflower. Capacity up to 200 metric tons/24-hour period based on soybean. Includes hydraulic power pack. Two available ( priced separately ).
Asset ID: 8819
Available: 2
Expander 200 MTPD
### Tecnal 8 inch expander ### Model EXP-205 MLE with 150HP motor. Disassembled. Serial #'s 112/17 & 113/17. Rotation of 165 rpm. Last used for sunflower. Capacity up to 200 metric tons/24-hour period based on soybean. Includes hydraulic power pack. Two available ( priced separately ).
Expander 200 MTPD
Asset ID: 8837
Available: 1
## Tecnal Expander Model EXP-205 ##
Series A, serial no. 105 is a heavy-duty industrial expander designed primarily for oilseed preparation (soybean, sunflower, cottonseed, and more) in the vegetable oil extraction industry. Capacity up to 200 metric tons/24-hour period based on soybean. This unit has seen light duty and was installed and in good working condition before it was removed from the process. Includes expander, 200 HP motor, belt and sheave.