Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Centrifuge and decanter'
25 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Decanter P-3400 3-Phase
Asset ID: 6001
Available: 1
3-phase decanter Sharples P3400 Super-D-Canter. Bowl dimensions 14" x 48", beach angle 10 degree. Max speed of 4000 RPM, Max G force 3160 x G Force. Quasi-axial flow conveyor design. 316 ss rotating assembly & case and cover. P-165, Mounted to a unitized sub-base with vibration isolators. Main drive motor: 40 H.P. TEFC, 1800 RPM, 480 voltage, 3-phase, 60 cycle power required, NEMA-12 enclosure, Reduced voltage starter comes with it. No back drive motor. Built in 1980 - decanter was rebuilt in 2001. P.125 Gearbox Ratio - Max Allowable Torque on Gearbox 1.72kgf m. Capacity from 13 gpm to 75 gpm depending on viscosity of feed and rpm of motor. Rated at 11 ton/hr at infeed of 10% solids (264 TPD max). Price incudes removal and loading - any crating or handling for international shipping will be extra.
Asset ID: 6001
Available: 1
Decanter P-3400 3-Phase
3-phase decanter Sharples P3400 Super-D-Canter. Bowl dimensions 14" x 48", beach angle 10 degree. Max speed of 4000 RPM, Max G force 3160 x G Force. Quasi-axial flow conveyor design. 316 ss rotating assembly & case and cover. P-165, Mounted to a unitized sub-base with vibration isolators....
Decanter Centrifuge CA-458
Asset ID: 7638
Available: 1
Westfalia CA 458-00-02 decanter centrifuge, 316ss. Max bowl speed 3000 RPM, 2300 G's, 18 x 80" bowl ID. 6.25" single lead hardsurfaced conveyor, 30 KW motor 440/3/60/3535 RPM, hydraulic backdrive with 15 HP motor feed tube, chutes and control panel mounted on a stand. 1994 vintage.
Asset ID: 7638
Available: 1
Decanter Centrifuge CA-458
Westfalia CA 458-00-02 decanter centrifuge, 316ss. Max bowl speed 3000 RPM, 2300 G's, 18 x 80" bowl ID. 6.25" single lead hardsurfaced conveyor, 30 KW motor 440/3/60/3535 RPM, hydraulic backdrive with 15 HP motor feed tube, chutes and control panel mounted on a stand. 1994 vintage.
Decanter CB-505
Asset ID: 1716
Available: 1
Westfalia solid bowl horizontal decanter centrifuge. 2 phase, Model CB-505-71-32 sanitary. Used. Bowl 500/265 mm/19,685" diameter x 84" long. Centripetal pump discharge with GEA Varipond P design for adjusting pond depth on the fly. T316L stainless steel contact surface. Main drive 120 HP (90KW). Back drive 20HP. Max bowl speed 3500 rpm. Lube system with pump and plate exchanger, casing, and frame. No stand, no controls. Priced As Is - will need a stand. We can also recondition for you
Asset ID: 1716
Available: 1
Decanter CB-505
Westfalia solid bowl horizontal decanter centrifuge. 2 phase, Model CB-505-71-32 sanitary. Used. Bowl 500/265 mm/19,685" diameter x 84" long. Centripetal pump discharge with GEA Varipond P design for adjusting pond depth on the fly. T316L stainless steel contact surface....
Decanter Centrifuge P-3000
Asset ID: 1734
Available: 1
Sharples decanter centrifuge Model P-3000. 125/1 ratio gearbox. 4.25” conveyor pitch spacing with tiles. 25 HP main-drive motor and 10 HP back-drive motor. 460/3/60. On skid with starter.
Asset ID: 1734
Available: 1
Decanter Centrifuge P-3000
Sharples decanter centrifuge Model P-3000. 125/1 ratio gearbox. 4.25” conveyor pitch spacing with tiles. 25 HP main-drive motor and 10 HP back-drive motor. 460/3/60. On skid with starter.
Decanter PM75000
Asset ID: 1762
Available: 2
Sharples PM75000 Decanter - (2) Units available. RECONDITIONED - WARRANTY. Rated at 270 gpm. CENTRIFUGE 29 inch x 92 inch with Gear Units, (95 to 1). Material stainless steel ss316/ss317. Max bowl speed 2600 RPM, 2780 G's, 360 degree cake discharge, 10" single lead conveyor with STC tiles & STC feed zone, half-moon plate dams, fiberglass top cover, feed tube, P180 95:1 gearbox, Includes 175 HP motor 460/3/60/1785PM and new 60 HP AC backdrive. With stand, lube system, polymer feed tube, guards, vibration isolators, control panels, spare parts & tools. New controls with touch screen, vibration switch, and VFD’s for 200 HP and 60 HP. Prior use: Waste water sewage treatment 1984 vintage. Allow 16-18 weeks ARO. There are (2) machines available - priced separately
Asset ID: 1762
Available: 2
Decanter PM75000
Sharples PM75000 Decanter - (2) Units available. RECONDITIONED - WARRANTY. Rated at 270 gpm. CENTRIFUGE 29 inch x 92 inch with Gear Units, (95 to 1). Material stainless steel ss316/ss317....
Sharples P3400 Decanter Centrifuge
Asset ID: 2055
Available: 1
Sharples P3400 completely reconditioned decanter centrifuge 14 x 48 52,500.00
Carbon steel skid and guards. 4.25 conveyor with hardfacing 4000 rpm max
Non Sanitary P3400 , 15 HP back drive, 40 HP Main Drive 3,100 g's max, 50 GPM
Gearbox assembly 125 to 1 gear box ratio
All new bearings, seals, mechanical seals, o rings
Paint Carbon steel base, White, paint carbon steel sub base white, and stand
New main motor coupling and belts and vibration switch
Control panel - Decanter Centrifuge control panel with 40 HP Bowl and 15 HP Backdrive
460 VAC / 3 phase power / 60 Hz
120 VAC transformer with protective circuit breakers
24VDC Power Supply with protective circuit breakers
NEMA 12 Freestanding enclosure with thermostat controlled cooling fan
Flange mount 100 amp disconnect and ground lug
150HP VFD with protective fuses for the Bowl
15HP VFD with protective fuses for the feed pump
Emergency Stop Pushbutton
Asset ID: 2055
Available: 1
Sharples P3400 Decanter Centrifuge
Sharples P3400 completely reconditioned decanter centrifuge 14 x 48 52,500.00 Carbon steel skid and guards....
Decanter Frames & Bases
Asset ID: B2092
Available: 1
Frames and bases for Alfa Laval decanter PM75000. Three steel frames for decanter, (4) decanter bases (one with cover), Sold as a LOT.
Asset ID: B2092
Available: 1
Decanter Frames & Bases
Frames and bases for Alfa Laval decanter PM75000. Three steel frames for decanter, (4) decanter bases (one with cover), Sold as a LOT.
Decanter
Asset ID: 1998
Available: 1
Siebtechnik short bowl decanter (SBD) model SBD 400K, serial 6790. Speed 2800 rpm. Drive motor approx 20 HP.
The SHORTBOWL decanter with cantilever design is the optimal solution for hot applications and high cleaning requirements. This over-hung design special geometry is highly suited for the separation of fine solid particles having a specific gravity that is very different from the liquid phase. The unit is ideal for pharmaceutical or food operations.
Asset ID: 1998
Available: 1
Decanter
Siebtechnik short bowl decanter (SBD) model SBD 400K, serial 6790. Speed 2800 rpm. Drive motor approx 20 HP. The SHORTBOWL decanter with cantilever design is the optimal solution for hot applications and high cleaning requirements....
Decanter Centrifuge P-3000
Asset ID: 1999
Available: 1
Sharples P-3000 decanter. Rebuilt in 2019 and only run a few times after that. All new controls. Main drive is a belt drive with explosion proof motor 25 HP 460v 3/60, no back drive is included. Last running an alcohol slurry.
Asset ID: 1999
Available: 1
Decanter Centrifuge P-3000
Sharples P-3000 decanter. Rebuilt in 2019 and only run a few times after that. All new controls. Main drive is a belt drive with explosion proof motor 25 HP 460v 3/60, no back drive is included. Last running an alcohol slurry.
Decanter, Gastight ss316
Asset ID: 2350
Available: 1
### Siebtechnik Tema SBD-210 gastight short bowl decanter, 316ss. ###
- Gas tight decanter reconditioned by OEM in 2020
Max bowl speed 5000 RPM, 2933 x G, rated @ 11 GPM, 0.45 bar, 5.5 KW XP motor 690/400/3/50, gearbox, 0.37 KW XP backdrive, feed tube, guard, chutes, nitrogen purge system, SS support frame, PLC control panel with 2 VFDs and all documentation. 2013 vintage.
Asset ID: 2350
Available: 1
Decanter, Gastight ss316
### Siebtechnik Tema SBD-210 gastight short bowl decanter, 316ss....
Centrifuge RSE 50
Asset ID: 2361
Available: 1
GEA Westfalia disk centrifuge RSE 50-01-076, ser num 1724-341. Includes set of tools. Driven by 17.5 KW (25 HP) motor 1750 rpm 480v 3/60. Rated at approx 15,000 lbs/hr depending on feedstock. Last used for degumming tallow. Rated at 12,000 lbs/hr (25 gpm) on soybean oil water degumming. This centrifuge is offered As Is but we can recondition for you and add controls to include warranty if desired.
Asset ID: 2361
Available: 1
Centrifuge RSE 50
GEA Westfalia disk centrifuge RSE 50-01-076, ser num 1724-341. Includes set of tools. Driven by 17.5 KW (25 HP) motor 1750 rpm 480v 3/60. Rated at approx 15,000 lbs/hr depending on feedstock. Last used for degumming tallow. Rated at 12,000 lbs/hr (25 gpm) on soybean oil water degumming....
Centrifuge MAPX-210
Asset ID: X2100
Available: 1
Alfa Laval MAPX-210 purifier desludger disk centrifuge system. Max capacity 39 gpm and can separate solids with a density of up to 10,000 kg/m2. Bowl speed 5100 rpm. This is an efficient and reliable choice for separating solid impurities and water from fluids. Self Cleaning centrifuge. Serial 4019166. Skid mounted with controls and heat exchanger
Asset ID: X2100
Available: 1
Centrifuge MAPX-210
Alfa Laval MAPX-210 purifier desludger disk centrifuge system. Max capacity 39 gpm and can separate solids with a density of up to 10,000 kg/m2. Bowl speed 5100 rpm. This is an efficient and reliable choice for separating solid impurities and water from fluids. Self Cleaning centrifuge....
Centrifuge B214 C
Asset ID: 5567
Available: 1
Alfa Laval B214C centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery. We can quote an "As Is" price if desired.
Asset ID: 5567
Available: 1
Centrifuge B214 C
Alfa Laval B214C centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery. We can quote an "As Is" price if desired.
Centrifuge B214 A
Asset ID: 5575
Available: 1
Alfa Laval B214A centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery. Reconditioning includes, complete disassembly of machine, sandblast and paint all carbon steel parts, remove gear pump, install end plate, Rebuild using all new parts, Bearings, seals, and O-rings (Viton), All Vibration Isolators units will be tested and come with manuals, some tools and one set of gravity discs. High speed balance will also be performed. 40 HP motor will be rebuilt or new depending upon timing. Welcome to inspect the machine as tests are run to verify balance. Centrifuge can also be purchased " as is, where is " if desired.
Asset ID: 5575
Available: 1
Centrifuge B214 A
Alfa Laval B214A centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery....
Centrifuge B214 C
Asset ID: 7117
Available: 1
DeLaval B214C solid bowl disc centrifuge. Serial number 3532804. Capacity approximately 36,000 to 40,000 #/hr (84 gpm). Motor is 40HP. Cleaned and painted, epoxy internal coating but not reconditioned. Bowl removed and crated for shipping.
Asset ID: 7117
Available: 1
Centrifuge B214 C
DeLaval B214C solid bowl disc centrifuge. Serial number 3532804. Capacity approximately 36,000 to 40,000 #/hr (84 gpm). Motor is 40HP. Cleaned and painted, epoxy internal coating but not reconditioned. Bowl removed and crated for shipping.
Centrifuge OSB-35
Asset ID: 8003
Available: 1
### Reconditioned Westfalia Model OSB-35-02 ###
Self-Cleaning centrifuge - Max. Hydraulic Capacity: 90 GPM, Max. Process Capacity: Varies depending on process conditions.
- Viton o-rings used in product contact areas
- Direct-drive design, 20 HP Class 1 Div. 1 explosion-proof motor - 460/480 Volt, 3 phase, 60 cycle,
- Variable shoot design (partial or full shot),
- Stainless steel rotating assembly, Powder-coated grey iron frame and silumin cover,
- Heavy Phase (water) discharged by gravity, Light Phase (oil) discharged under pressure by means of a paring disk (centripetal pump),
- New control panel and VFD and HMI touch screen in wall mounted enclosure (non-explosion proof)
- One (1) set of necessary special tools
- One (1) set of regulating discs, One (1) set of spare bowl o-rings, One (1) copy of the Operation / Spare parts Manual,
See details in Document Link. Feed pump not included. Customer required to supply their own feed pump. Allow 6-8 weeks ARO.
Asset ID: 8003
Available: 1
Centrifuge OSB-35
### Reconditioned Westfalia Model OSB-35-02 ### Self-Cleaning centrifuge - Max. Hydraulic Capacity: 90 GPM, Max. Process Capacity: Varies depending on process conditions. - Viton o-rings used in product contact areas - Direct-drive design, 20 HP Class 1 Div....
Centrifuge VO 10 ss
Asset ID: 1931
Available: 1
### **New Alfa Laval VO10 centrifuge** ###
NEW centrifuge still in original crate. Built in 2021 and never used. This Alfa Laval VO-10 disk centrifuge is aimed for gentle and cost-efficient refining of vegetable oils.
- Rated at hydraulic capacity 44 gpm for a nominal capacity of 100 MTPD (19 gpm).
- Direct drive 18.5 KW (25 HP) motor with VFD. 480v 3/60
- All wetted parts in contact with product are stainless steel 304
- Controls included
- Tools included
- Still in original crates
- We have the complete specifications in our Virtual Data Room - by invitation
- Available for immediate shipment
Asset ID: 1931
Available: 1
Centrifuge VO 10 ss
### **New Alfa Laval VO10 centrifuge** ### NEW centrifuge still in original crate. Built in 2021 and never used. This Alfa Laval VO-10 disk centrifuge is aimed for gentle and cost-efficient refining of vegetable oils....
Centrifuge MOPX 207
Asset ID: AL-1
Available: 1
Alfa Laval MOPX 207 disk stack centrifuge. Model MOPX 207 SGT-24-60, serial number 2967145. Rebuilt, never used. Approx capacity 3 to 6 cu m/hr depending on oil viscosity (15 to 26 gpm). Includes controls, VFD for direct drive 10 HP motor, and necessary tools.
Asset ID: AL-1
Available: 1
Centrifuge MOPX 207
Alfa Laval MOPX 207 disk stack centrifuge. Model MOPX 207 SGT-24-60, serial number 2967145. Rebuilt, never used. Approx capacity 3 to 6 cu m/hr depending on oil viscosity (15 to 26 gpm). Includes controls, VFD for direct drive 10 HP motor, and necessary tools.
Centrifuge MOPX 207
Asset ID: AL-2
Available: 1
Alfa Laval MOPX 207 disk stack centrifuge. Model MOPX 207 TGT-14-60, serial number 2967197. Rebuilt, never used. Approx capacity 3 to 6 cu m/hr depending on oil viscosity (15 to 26 gpm). Includes controls, VFD for direct drive 10 HP motor, and necessary tools.
Asset ID: AL-2
Available: 1
Centrifuge MOPX 207
Alfa Laval MOPX 207 disk stack centrifuge. Model MOPX 207 TGT-14-60, serial number 2967197. Rebuilt, never used. Approx capacity 3 to 6 cu m/hr depending on oil viscosity (15 to 26 gpm). Includes controls, VFD for direct drive 10 HP motor, and necessary tools.
Centrifuge MOPX 207
Asset ID: AL-3
Available: 1
Alfa Laval MOPX 207 disk stack centrifuge. Model MOPX 207 SGT-24-60, serial number 4036230. Rebuit, never used. Approx capacity 3 to 6 cu m/hr depending on oil viscosity (15 to 26 gpm). Includes controls, VFD for direct drive 10 HP motor, and necessary tools.
Asset ID: AL-3
Available: 1
Centrifuge MOPX 207
Alfa Laval MOPX 207 disk stack centrifuge. Model MOPX 207 SGT-24-60, serial number 4036230. Rebuit, never used. Approx capacity 3 to 6 cu m/hr depending on oil viscosity (15 to 26 gpm). Includes controls, VFD for direct drive 10 HP motor, and necessary tools.
Centrifuge MOPX 207 bare
Asset ID: AL-4
Available: 1
Alfa Laval MOPX 207 disk stack centrifuge. Model MOPX 207 SGT-24-60. Rebuilt - never used. Approx capacity 3 to 6 cu m/hr depending on oil viscosity (15 to 26 gpm). This is a bare machine still in crate to be used as spare. No controls, no tools, no motor. Photo shown is representative and is of identical centrifuge.
Asset ID: AL-4
Available: 1
Centrifuge MOPX 207 bare
Alfa Laval MOPX 207 disk stack centrifuge. Model MOPX 207 SGT-24-60. Rebuilt - never used. Approx capacity 3 to 6 cu m/hr depending on oil viscosity (15 to 26 gpm). This is a bare machine still in crate to be used as spare. No controls, no tools, no motor....
Centrifuge RSA-60
Asset ID: 1680
Available: 1
Westfalia RSA 60-01-076 vegetable oil separator.serial # 1697-254. Max bowl speed 6450 RPM, solids 1.25 kg/dm3, heavy solids 1.1 kg/dm3. Driven by 15 KW (20 HP) explosion proof motor 400v 3 phase 50 Hz. Rated @ 13000 LPH (approx 60 gpm), both liquid phases discharged under pressure, No tools or Controls. Was recently taken apart and thoroughly cleaned/inspected. Bowl has been rebuilt and installed.
Asset ID: 1680
Available: 1
Centrifuge RSA-60
Westfalia RSA 60-01-076 vegetable oil separator.serial # 1697-254. Max bowl speed 6450 RPM, solids 1.25 kg/dm3, heavy solids 1.1 kg/dm3. Driven by 15 KW (20 HP) explosion proof motor 400v 3 phase 50 Hz....
Centrifuge OSB-35
Asset ID: 1748
Available: 1
Remanufactured Westfalia model OSB 35-02-576 single pump on light phase, heavy phase by gravity oil purifer. No controls. Capacity nominal 23,000 liters/hr (100 gpm). This machine is completely rebuilt. This includes replacement of bearings, seals and remanufacture of any substandard parts. The exterior cosmetics are restored to the best possible condition. The machine will be assembled, balanced, and run for several hours prior to shipping.. Ready to ship - one - two weeks ARO
- Includes:20 HP, 480 Volt, 3 Phase, 60 Cycle Explosion Proof Motor
- 6500 RPM Bowl Speed, 11,000 G Force
- Paring Device on Light Phase
- Gravity Discharge on Heavy Phase
- Direct Drive
- Powder Coated Frame
- 20 Litre Bowl Volume
- 11 Litre Sludge Space
- 40 Degree Bowl with 0.5 MM Caulk Space
- Stainless Bowl
- SS Bowl Liner, with set of Erosion Clips
- Water Harness
- Special Set of Tools
- Operation / Parts Manual
- Warranty 6 months
Asset ID: 1748
Available: 1
Centrifuge OSB-35
Remanufactured Westfalia model OSB 35-02-576 single pump on light phase, heavy phase by gravity oil purifer. No controls. Capacity nominal 23,000 liters/hr (100 gpm). This machine is completely rebuilt. This includes replacement of bearings, seals and remanufacture of any substandard parts....
Centrifuge MAB 206
Asset ID: 1756
Available: 1
Alfa Laval centrifuge Model MAB 206-S-24-60-HZ. Serial No. 2965454 Throughput capacity approx 10.6 m3/h (46.6 gpm). Separation takes place in a solids-retaining bowl that can be arranged for either clarification or purification. Solids retained in bowl and removed by manually cleaning. Was in biodiesel service. Still installed. Voltage: 3-Phase 575v. There are (2) MAB centrifuges here (Asset 1756 and Asset 1757). If both are bought, we can ship on the skid they are mounted on. Price is for EACH MAB centrifuge which includes removal and loading on your truck. Controls not included. Local Start/Stop Control Only. We can provide controls at additional charge.
Asset ID: 1756
Available: 1
Centrifuge MAB 206
Alfa Laval centrifuge Model MAB 206-S-24-60-HZ. Serial No. 2965454 Throughput capacity approx 10.6 m3/h (46.6 gpm). Separation takes place in a solids-retaining bowl that can be arranged for either clarification or purification. Solids retained in bowl and removed by manually cleaning....
Centrifuge MAB 206
Asset ID: 1757
Available: 1
Alfa Laval centrifuge Model MAB 206S-24-60/4049-8. Serial No. 4032493. Throughput capacity approx 10.6 m3/h. (46.6 gpm). Separation takes place in a solids-retaining bowl that can be arranged for either clarification or purification. Solids retained in bowl and removed by manually cleaning. Was in biodiesel service. Still installed. Voltage: 3-Phase 575. There are (2) MAB centrifuges here (Asset 1756 and Asset 1757). If both are bought, we can ship on the skid they are mounted on. Price is for EACH MAB centrifuge which includes removal and loading on your truck. Controls not included. Local Start/Stop Control Only. We can provide controls at additional charge.