Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Pump'
71 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
Pump, Split Case
Asset ID: 7412
Available: 1
Worthington Split case pump. Model 5LN-22. Size is 8" x 5" - 22" Impeller, epoxy lined. Rated at 1250 gpm at 420 ft TDH. (Requires 250 HP motor 1775 rpm not included). See pump curve in document links This pump has been rebuilt and was never used after rebuild. Used as a back up fire pump so it is high head. Rebuilt by HydroAire Services job # 6082-12-11-11. Rotation: GREY pump looking at the shaft, rotation is counter clockwise. Note Worthington pumps are now backed by Flowserve. Bare pump only - Grey. Shipping dimensions 48 x 48 x 45" tall, 1350 pounds.
Asset ID: 7412
Available: 1
Pump, Split Case
Worthington Split case pump. Model 5LN-22. Size is 8" x 5" - 22" Impeller, epoxy lined. Rated at 1250 gpm at 420 ft TDH. (Requires 250 HP motor 1775 rpm not included). See pump curve in document links This pump has been rebuilt and was never used after rebuild....
Sump Pump
Asset ID: 1945
Available: 1
Vertical sump pump by Pumpworks model 820. New - stored in warehouse as spare. Size 1.5x1-8 with 8" impeller. Material carbon steel, heavy duty configuration. Rated capacity 25 gpm at 58 ft TDH. Pump serial number 18-23305-8-1. Motor is Baldor 2 HP 1755 rpm 230/460 3/60 TEFC Frame 145TC
Asset ID: 1945
Available: 1
Sump Pump
Vertical sump pump by Pumpworks model 820. New - stored in warehouse as spare. Size 1.5x1-8 with 8" impeller. Material carbon steel, heavy duty configuration. Rated capacity 25 gpm at 58 ft TDH. Pump serial number 18-23305-8-1. Motor is Baldor 2 HP 1755 rpm 230/460 3/60 TEFC Frame 145TC
Gear Pump
Asset ID: X2007
Available: 1
Small positive displacement pump (gear pump probably). Specs unknown. Pump by FFA Pot.
Asset ID: X2007
Available: 1
Gear Pump
Small positive displacement pump (gear pump probably). Specs unknown. Pump by FFA Pot.
Positive displacement Pump
Asset ID: X2012
Available: 1
Viking positive displacement pump. Specs unknown - lste used as pump from Glycerin settler
Asset ID: X2012
Available: 1
Positive displacement Pump
Viking positive displacement pump. Specs unknown - lste used as pump from Glycerin settler
Positive Displacement Pump
Asset ID: X2013
Available: 1
Positive displacement pump. Specs unknown - last used as a Stripper feed pump
Asset ID: X2013
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as a Stripper feed pump
Vacuum Pump
Asset ID: X2015
Available: 1
Dekker Duravane Titan series single-stage monobloc liquid ring Vacuum Pump, Model DV0150B-KA3. .Max vacuum level 29" Hg. Specs: 150 acfm, materials cast iron with ss316 impeller, 2.5" 150# flange connections, seal water flow rate 4.5 gpm, driven by 10HP motor 460v 3/60 1750 rpm. The pumps feature a variable discharge port design which adjusts automatically to the internal compression ratio of the vacuum pump resulting in maximum efficiency throughout the vacuum range. Advanced fluid dynamics result in high volumetric efficiency with 50% less seal-liquid requirement.
Used as Stripper Vacuum Pump South
Asset ID: X2015
Available: 1
Vacuum Pump
Dekker Duravane Titan series single-stage monobloc liquid ring Vacuum Pump, Model DV0150B-KA3. .Max vacuum level 29" Hg. Specs: 150 acfm, materials cast iron with ss316 impeller, 2.5" 150# flange connections, seal water flow rate 4.5 gpm, driven by 10HP motor 460v 3/60 1750 rpm....
Vacuum Pump
Asset ID: X2016
Available: 1
Dekker Duravane Titan series single-stage monobloc liquid ring Vacuum Pump, Model DV0150B-KA3. .Max vacuum level 29" Hg. Specs: 150 acfm, materials cast iron with ss316 impeller, 2.5" 150# flange connections, seal water flow rate 4.5 gpm, driven by 10HP motor 460v 3/60 1750 rpm. The pumps feature a variable discharge port design which adjusts automatically to the internal compression ratio of the vacuum pump resulting in maximum efficiency throughout the vacuum range. Advanced fluid dynamics result in high volumetric efficiency with 50% less seal-liquid requirement.
Used as Stripper Vacuum Pump North
Asset ID: X2016
Available: 1
Vacuum Pump
Dekker Duravane Titan series single-stage monobloc liquid ring Vacuum Pump, Model DV0150B-KA3. .Max vacuum level 29" Hg. Specs: 150 acfm, materials cast iron with ss316 impeller, 2.5" 150# flange connections, seal water flow rate 4.5 gpm, driven by 10HP motor 460v 3/60 1750 rpm....
Positive Displacement Pump
Asset ID: X2019
Available: 1
Positive displacement pump - probably gear. Specs unknown - last used as Small pump located under glycerin coalescer
Asset ID: X2019
Available: 1
Positive Displacement Pump
Positive displacement pump - probably gear. Specs unknown - last used as Small pump located under glycerin coalescer
Positive Dispacement Pump
Asset ID: X2020
Available: 1
Positive displacement pump, probably Gorman Rupp gear pump. Specs unknown - last used as Larger pump under glycerin coalescer
Asset ID: X2020
Available: 1
Positive Dispacement Pump
Positive displacement pump, probably Gorman Rupp gear pump. Specs unknown - last used as Larger pump under glycerin coalescer
Condensate Pump
Asset ID: X2043
Available: 1
Centrifugal condensate pump at condensate receiver. Vertical. Driven by 5HP motor. Specs unknown
Asset ID: X2043
Available: 1
Condensate Pump
Centrifugal condensate pump at condensate receiver. Vertical. Driven by 5HP motor. Specs unknown
Positive Displacement Pump
Asset ID: X2046
Available: 1
Positive displacement pump. Specs unknown - last used as Settler pump.
Asset ID: X2046
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as Settler pump.
Positive Dispacement Pump
Asset ID: X2049
Available: 1
Positive displacement pump. Specs unknown - last used as MRU pump.
Asset ID: X2049
Available: 1
Positive Dispacement Pump
Positive displacement pump. Specs unknown - last used as MRU pump.
Vertical Centrifugal Pump
Asset ID: X2051
Available: 1
Vertical centrifugal pump. Specs unknown - last used as Scrubber pump.
Asset ID: X2051
Available: 1
Vertical Centrifugal Pump
Vertical centrifugal pump. Specs unknown - last used as Scrubber pump.
Vacuum Pump
Asset ID: X2052
Available: 1
Vacuum pump. Specs unknown - last used as Located Next to MRU
Asset ID: X2052
Available: 1
Vacuum Pump
Vacuum pump. Specs unknown - last used as Located Next to MRU
Positive Displacement Pump
Asset ID: X2054
Available: 1
Positive displacement pump. Specs unnown - last used as Knockout Pot Pump
Asset ID: X2054
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unnown - last used as Knockout Pot Pump
Positive Displacement Pump
Asset ID: X2059
Available: 1
Positive displacement pump. Specs unknown - last used as MRU Bio Cooler South
Asset ID: X2059
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as MRU Bio Cooler South
Centrifugal Pump
Asset ID: X2062
Available: 1
Centrifugal pump. Specs unknown - last used as Break Tank Pump
Asset ID: X2062
Available: 1
Centrifugal Pump
Centrifugal pump. Specs unknown - last used as Break Tank Pump
Positive Displacement Pump
Asset ID: X2065
Available: 1
Positive displacement pump. Specs unknown - last used as HydraSep 1 Pump
Asset ID: X2065
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as HydraSep 1 Pump
Positive Displacement Pump
Asset ID: X2067
Available: 1
Gorman Rupp positive displaceent pump. Specs unknown - last Used as Hydra Sep 2 Pump
Asset ID: X2067
Available: 1
Positive Displacement Pump
Gorman Rupp positive displaceent pump. Specs unknown - last Used as Hydra Sep 2 Pump
Positive Displacement Pump
Asset ID: X2071
Available: 1
Positive displacement pump. Specs unknown - last used as VLF Feedpump
Asset ID: X2071
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as VLF Feedpump
Centrifugal Pump
Asset ID: X2072
Available: 1
Centrifugal pump. Specs unknown - last used as Precoat Pump
Asset ID: X2072
Available: 1
Centrifugal Pump
Centrifugal pump. Specs unknown - last used as Precoat Pump
Centrifugal Pump
Asset ID: X2074
Available: 1
Centrifugal pump. Specs unknowm - last used as Cold Soak Pump West
Asset ID: X2074
Available: 1
Centrifugal Pump
Centrifugal pump. Specs unknowm - last used as Cold Soak Pump West
Positive Dislacement Pump
Asset ID: X2079
Available: 1
Positve displacement pump. Specs unknown - last used as RDO pump
Asset ID: X2079
Available: 1
Positive Dislacement Pump
Positve displacement pump. Specs unknown - last used as RDO pump
Positive Dsplacement Pump
Asset ID: X2082
Available: 1
Positive displacement pump. Specs unknown - last used as settling tank 1 pump
Asset ID: X2082
Available: 1
Positive Dsplacement Pump
Positive displacement pump. Specs unknown - last used as settling tank 1 pump
Vacuum Pump
Asset ID: X2086
Available: 1
Liquid ring vacuum pump. Specs unknown - last used as oil vacuum dryer pump for oil dryer
Asset ID: X2086
Available: 1
Vacuum Pump
Liquid ring vacuum pump. Specs unknown - last used as oil vacuum dryer pump for oil dryer
Positive Displacement Pump
Asset ID: X2091
Available: 1
Positive dispacement pump. Specs unknown - last used as crude tank pump
Asset ID: X2091
Available: 1
Positive Displacement Pump
Positive dispacement pump. Specs unknown - last used as crude tank pump
Positive Displacement Pump
Asset ID: X2092
Available: 1
Positive displacement pump. Specs unknown - last used as oil dryer pump
Asset ID: X2092
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as oil dryer pump
High Shear Mixer
Asset ID: X2096
Available: 1
High shear mixer, IKA. Specs unknown
Asset ID: X2096
Available: 1
High Shear Mixer
High shear mixer, IKA. Specs unknown
Goulds Pump ss
Asset ID: X2104
Available: 1
Goulds centrifugal pump, model 3196. Size 1.5 x 3-8 with 5.5 inch impeller. 3600 rpm. Designed for 92 gpm at 102 ft TDH. Material CD4MCU - stainless steel
Asset ID: X2104
Available: 1
Goulds Pump ss
Goulds centrifugal pump, model 3196. Size 1.5 x 3-8 with 5.5 inch impeller. 3600 rpm. Designed for 92 gpm at 102 ft TDH. Material CD4MCU - stainless steel
Vertical Multistage Pumps and MCC
Asset ID: PK-2097
Available: 2
Simflo Vertical 7-stage Multistage pump. Motor is 300 HP, 3565 rpm 460v 3/60 inverter duty. Model SD10C. (New model cross references to SP10L - same pump). Pump designed for 600 gpm at 1245 ft TDH. Includes MCC with VFD drives and the portable building the MCC is in.
* You are only purchasing two pumps with motors (no piping or anything in background of the pictures). Purchase DOES include complete MCC building w/ VFD's and MCC. Will be an oversized load. Price is for the LOT.
Package Includes:
- Two (2) Simflo (Simmons) Vertical pumps
Model SD10C (SP10L is new model # but same pump)
7-Stage, 600 gpm at 1245 ft/head, 300 HP
Bowl dia 10.19", BEP head 158 ft per stage
- MCC Portable Building
- MCC 4000A Cutler-Hammer Advantage Series 2100
480 V 3 Phase 3-wire 60 Hz
3200 A Sect.1-2 800 amp Sect.3-5 1200 amp
w/ 4000 amp Main and Breakers for each VFD/pump and includes spare breaker
- Starters installed in MCC
(2) Allen-Bradley VFD's - CAT # 1336E-BP350-AN-CM-EN
AC Input: 300-378 KVA 380-480 V 455 amps 50/60 Hz 3 Phase
AC Output: 366 KVA 0-460 V 459.2 amps 0-400 Hz 3 Phase(2) Allen-Bradley VFD's - CAT # 1336E-BP350-AN-CM-EN
AC Input: 300-378 KVA 380-480 V 455 amps 50/60 Hz 3 Phase
AC Output: 366 KVA 0-460 V 459.2 amps 0-400 Hz 3 Phase
- Allen Bradley PanelView 1000 plc controls
This pump package is used. It was in good working order when idled and removed in late 2023. Units are removed and ready to load.
Asset ID: PK-2097
Available: 2
Vertical Multistage Pumps and MCC
Simflo Vertical 7-stage Multistage pump. Motor is 300 HP, 3565 rpm 460v 3/60 inverter duty. Model SD10C. (New model cross references to SP10L - same pump). Pump designed for 600 gpm at 1245 ft TDH. Includes MCC with VFD drives and the portable building the MCC is in....
Peristaltic Pump
Asset ID: AF16
Available: 1
PC-31 Slurry Stock. Verderflex peristaltic pump by Verder. Model VF65, serial 43260E6. Driven by gearmotor Baldor 10Hp at 1760 rpm inverter duty. Gearbox ratio 38.4:1. Material cast iron body/cast iron rotor. Size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev. Flow capacity controlled by VDF and ranges from approx. 60 gpm at 75 psig to 90 gpm at 10 psig. See pump curves in Link. Maximum solids content 16.25mm compressible. Maximum lift is 9.5 mWc (meters water column)
Asset ID: AF16
Available: 1
Peristaltic Pump
PC-31 Slurry Stock. Verderflex peristaltic pump by Verder. Model VF65, serial 43260E6. Driven by gearmotor Baldor 10Hp at 1760 rpm inverter duty. Gearbox ratio 38.4:1. Material cast iron body/cast iron rotor. Size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev....
Centrifugal pump soft water feed
Asset ID: PC-7301
Available: 1
Goulds 3196 centrifugal pump model LF3196-STX 1x1.5-4 with 4.12" dia impeller. Design rating 20 gpm at 55 TDH. Ser no. A734F836. Mounted on bedplate. Weight 244 pounds. Built 2007. Last used for soft water feed pump. Part of boiler feedwater system PK-1111
Asset ID: PC-7301
Available: 1
Centrifugal pump soft water feed
Goulds 3196 centrifugal pump model LF3196-STX 1x1.5-4 with 4.12" dia impeller. Design rating 20 gpm at 55 TDH. Ser no. A734F836. Mounted on bedplate. Weight 244 pounds. Built 2007. Last used for soft water feed pump. Part of boiler feedwater system PK-1111
Cooling Tower Pump
Asset ID: PC-7101AV
Available: 1
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds. Was pumping water; Used as a Cooling Tower Pump. NOTE: This equipment is for sale but currently installed and not available until late 2023.
Asset ID: PC-7101AV
Available: 1
Cooling Tower Pump
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds....
Centrifugal Magnetic Pump
Asset ID: 2029
Available: 1
Klaus Union centrifugal magnetic drive pump - NEW (old stock), unused in original crate. This pump has a permanent magnetic synchronous coupling. This is pump only, no motor. Type SLM N 100-200-160 S 3 GU OE, Contract number 1.054232-0001, series P00056621. Size 4x5. Built 2004 Designed for 224.73 m3/hr at 50.34 m head. (989 gpm at 165 ft TDH. Developed HP = 125 HP). 3550 rpm with calculated power at 93 kw. (no motor supplied). Ready to load
Asset ID: 2029
Available: 1
Centrifugal Magnetic Pump
Klaus Union centrifugal magnetic drive pump - NEW (old stock), unused in original crate. This pump has a permanent magnetic synchronous coupling. This is pump only, no motor. Type SLM N 100-200-160 S 3 GU OE, Contract number 1.054232-0001, series P00056621. Size 4x5....
Cooling Tower Pump
Asset ID: PC-7101D
Available: 1
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds. Was pumping water; Used as a Cooling Tower Pump.
Asset ID: PC-7101D
Available: 1
Cooling Tower Pump
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds....
Centrifugal Pump
Asset ID: 7139B
Available: 1
Durco centrifugal pump. Size 2K 3x1.5-10/96. Serial 405665. Includes 50HP Marathon electric motor @ 3515 RPM. 230/460V, 116/80A. Used - will need reconditioning
Asset ID: 7139B
Available: 1
Centrifugal Pump
Durco centrifugal pump. Size 2K 3x1.5-10/96. Serial 405665. Includes 50HP Marathon electric motor @ 3515 RPM. 230/460V, 116/80A. Used - will need reconditioning
Pump, lobe SS
Asset ID: 5992
Available: 1
Sanitary positive displacement pump - stainless steel. Waukesha. Includes pump, motor, gearbox, baseplate - as unit. Last used for margarine production.
Asset ID: 5992
Available: 1
Pump, lobe SS
Sanitary positive displacement pump - stainless steel. Waukesha. Includes pump, motor, gearbox, baseplate - as unit. Last used for margarine production.
High Shear Pump Mixer Reactor
Asset ID: 7528-4
Available: 1
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1947. Direct Drive inline shear mixer: Have DRS fine generator in them currently rated at 30 gpm. The lower-priced ULTRA-TURRAX UTL 1000 machines are particularly multifunctional and are used for the mixing, dispersing (emulsifying/suspending) and homogenizing of solid and liquid substances up to viscosities of several thousand mPa·s. Nominal flow 30 gpm (8000 l/hr), as a shear pump to 35 gpm. Pressure to 16 bar. Inlet/Outlet 2". Motor 20 HP 460/3/60 3530 rpm. On of these 4 units is serial number 1903. See data sheet for details. Removed and ready for loading.
Asset ID: 7528-4
Available: 1
High Shear Pump Mixer Reactor
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1947. Direct Drive inline shear mixer: Have DRS fine generator in them currently rated at 30 gpm....
Vertical Turbine Pump
Asset ID: P-4300B
Available: 1
Worthington QL double suction vertical turbine cooling tower pump. Model 12QL147. 3 stage design with 16 inch discharge. Designed for 7,000 GPM @ 167' head. Incudes 400 HP Siemens-Allis motor. 4000V, 52.8A, 60Hz, 3 phase, 1780 RPM
Asset ID: P-4300B
Available: 1
Vertical Turbine Pump
Worthington QL double suction vertical turbine cooling tower pump. Model 12QL147. 3 stage design with 16 inch discharge. Designed for 7,000 GPM @ 167' head. Incudes 400 HP Siemens-Allis motor. 4000V, 52.8A, 60Hz, 3 phase, 1780 RPM
Pulse pump
Asset ID: PM-4560
Available: 1
Pulsatron positive displacement pump, model Pulsatron. Size 304613 Used as a Pulse pump sn LPE4SA-PTC1-XXX.
Asset ID: PM-4560
Available: 1
Pulse pump
Pulsatron positive displacement pump, model Pulsatron. Size 304613 Used as a Pulse pump sn LPE4SA-PTC1-XXX.
Vertical Centrifugal Sump Pump
Asset ID: PC-7902
Available: 1
Goulds centrifugal sump pump, model 3171. Size 4X6-11. Driven by 3 HP motor 460v 3515 rpm. Used as a Boiler Sump Pump.
Asset ID: PC-7902
Available: 1
Vertical Centrifugal Sump Pump
Goulds centrifugal sump pump, model 3171. Size 4X6-11. Driven by 3 HP motor 460v 3515 rpm. Used as a Boiler Sump Pump.
Centrifugal Pump
Asset ID: PC-4101V
Available: 1
Goulds centrifugal pump, model 3196. Size 3X4-10 with 8.25" impeller designed for 150 gpm at 70 ft TDH at 1800 rpm. Material: 316 stainless steel. Serial num 733F55043. Driven by (HP/rpm/voltage/frame) 7.5/460/1800/213T motor.sn 733F550W3. Used as a Beer Column Reboiler Condensate Pump - see asset Z-4101.
Asset ID: PC-4101V
Available: 1
Centrifugal Pump
Goulds centrifugal pump, model 3196. Size 3X4-10 with 8.25" impeller designed for 150 gpm at 70 ft TDH at 1800 rpm. Material: 316 stainless steel. Serial num 733F55043. Driven by (HP/rpm/voltage/frame) 7.5/460/1800/213T motor.sn 733F550W3....
High Shear Pump Mixer Reactor
Asset ID: 7528-5
Available: 1
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1963. Direct Drive inline shear mixer: Have DRS fine generator in them currently rated at 30 gpm. The lower-priced ULTRA-TURRAX UTL 1000 machines are particularly multifunctional and are used for the mixing, dispersing (emulsifying/suspending) and homogenizing of solid and liquid substances up to viscosities of several thousand mPa·s. Nominal flow 30 gpm (8000 l/hr), as a shear pump to 35 gpm. Pressure to 16 bar. Inlet/Outlet 2". Motor 20 HP 460/3/60 3530 rpm. One of these 4 units is serial number 1903. See data sheet for details. Removed and ready for loading.
Asset ID: 7528-5
Available: 1
High Shear Pump Mixer Reactor
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1963. Direct Drive inline shear mixer: Have DRS fine generator in them currently rated at 30 gpm....
Vertical Centrifugal Sump Pump
Asset ID: PC-7906
Available: 1
Goulds centrifugal sump pump, model 3171. Size 4x6-11, capacity from 600 to 1000 gpm depending on head. Driven by 20HP motor 1365 rpm 460v. Used as a Main Collection Sump Pump #1.
Asset ID: PC-7906
Available: 1
Vertical Centrifugal Sump Pump
Goulds centrifugal sump pump, model 3171. Size 4x6-11, capacity from 600 to 1000 gpm depending on head. Driven by 20HP motor 1365 rpm 460v. Used as a Main Collection Sump Pump #1.
Centrifugal Pump
Asset ID: 380-PU-872
Available: 1
Recirculation pump. 4350 GPM @ 65TDH, Alloy D20, Durco Mark III Centrifugal pump, Size 3K10x8-16H/160RV. Designed for capacity 4950 gallons at 65 ft TDH. Skid mounted. Inlet 10 inch/outlet 8 inch. Driven by 125 HP motor 460v/1200 rpm .Part of Evaporator package PK-6045 and might not be able to be sold separately - Ask Us. For a list of all components, enter "pkevap" in the keyword search terms box.
Asset ID: 380-PU-872
Available: 1
Centrifugal Pump
Recirculation pump. 4350 GPM @ 65TDH, Alloy D20, Durco Mark III Centrifugal pump, Size 3K10x8-16H/160RV. Designed for capacity 4950 gallons at 65 ft TDH. Skid mounted. Inlet 10 inch/outlet 8 inch....
Cooling Tower Pump
Asset ID: PC-7101BV
Available: 1
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds. Was pumping water; Used as a Cooling Tower Pump.
Asset ID: PC-7101BV
Available: 1
Cooling Tower Pump
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds....
High Pressure Gear Pump
Asset ID: 7628
Available: 1
Flowserve positive displacement rotary gear pump, Model 1.5GRM. Suction/Discharge 1-1/2" Shaft size 7/8". Last used for High pressure pump for votator, Flows to 1200 gpm at 500 psi. GR pumps provide high efficiency, pulse-free pumping, Ser no. 1162803CHP001A. Driven by Baldor 15 HP 230/460v 3/60 at 1160 RPM.
Asset ID: 7628
Available: 1
High Pressure Gear Pump
Flowserve positive displacement rotary gear pump, Model 1.5GRM. Suction/Discharge 1-1/2" Shaft size 7/8". Last used for High pressure pump for votator, Flows to 1200 gpm at 500 psi. GR pumps provide high efficiency, pulse-free pumping, Ser no. 1162803CHP001A....
Centrifugal pump soft water feed
Asset ID: PC-7302
Available: 1
Goulds 3196 centrifugal pump model LF3196-STX 2x3-6 with 4.875" dia impeller. Design rating 180 gpm at 81 TDH . Driven by 7.5 HP motor at 3600 rpm. Material DI. Ser no. A734F837. Mounted on bedplate, Weight 370 pounds. Built 2007. Last used for soft water feed pump. Part of boiler feedwater system PK-1111
Asset ID: PC-7302
Available: 1
Centrifugal pump soft water feed
Goulds 3196 centrifugal pump model LF3196-STX 2x3-6 with 4.875" dia impeller. Design rating 180 gpm at 81 TDH . Driven by 7.5 HP motor at 3600 rpm. Material DI. Ser no. A734F837. Mounted on bedplate, Weight 370 pounds. Built 2007. Last used for soft water feed pump....
High Shear Pump Mixer Reactor
Asset ID: 7528-2
Available: 1
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1904. Direct Drive inline shear mixer: Have DRS fine generator in them currently rated at 30 gpm. The lower-priced ULTRA-TURRAX UTL 1000 machines are particularly multifunctional and are used for the mixing, dispersing (emulsifying/suspending) and homogenizing of solid and liquid substances up to viscosities of several thousand mPa·s. Nominal flow 30 gpm (8000 l/hr), as a shear pump to 35 gpm. Pressure to 16 bar. Inlet/Outlet 2". Motor 20 HP 460/3/60 3530 rpm. On of these 4 units is serial number 1903. See data sheet for details. Removed and ready for loading.
Asset ID: 7528-2
Available: 1
High Shear Pump Mixer Reactor
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1904. Direct Drive inline shear mixer: Have DRS fine generator in them currently rated at 30 gpm....
Centrifugal Pump
Asset ID: 7137G
Available: 1
Centrifugal pump with Baldor Super-E Cat. No EM3771T, Spec 07H02W279, Frame 215T, 10 TE HP, sn F999, Volts 230/46, 23.8/11.9 Amps, 3525 RPM, 60 Hz, 3 phase
Asset ID: 7137G
Available: 1
Centrifugal Pump
Centrifugal pump with Baldor Super-E Cat. No EM3771T, Spec 07H02W279, Frame 215T, 10 TE HP, sn F999, Volts 230/46, 23.8/11.9 Amps, 3525 RPM, 60 Hz, 3 phase
Vertical Turbine Pump
Asset ID: P-4300D
Available: 1
Vertical turbine cooling tower pump. 3 stage design. Bowls are 14" dia, 10" pipe, 114" OAL. With 150 HP US Electric Motor. 460V, 167A, 60Hz, 1785 RPM. Built 2003
Asset ID: P-4300D
Available: 1
Vertical Turbine Pump
Vertical turbine cooling tower pump. 3 stage design. Bowls are 14" dia, 10" pipe, 114" OAL. With 150 HP US Electric Motor. 460V, 167A, 60Hz, 1785 RPM. Built 2003
Cooling Tower Pump
Asset ID: PC-7101E
Available: 1
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds. Was pumping water; Used as a Cooling Tower Pump.
Asset ID: PC-7101E
Available: 1
Cooling Tower Pump
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds....
Centrifugal Pump
Asset ID: PC-3201
Available: 1
Goulds centrifugal pump model 3196 STX. Size 1.5x3-6. Impeller dia 4.625 in, rated at 135 gpm at 70 ft TDH. All mounted on bedplate. Physical size 39.25" long x 12" wide x 15.44 inches tall. Driven by (HP/rpm/voltage/frame) 7.5/3600/230/213T. Part of Process Scrubber Package PK-3201, For a list of all components enter pk3201 into search box on web site.
Asset ID: PC-3201
Available: 1
Centrifugal Pump
Goulds centrifugal pump model 3196 STX. Size 1.5x3-6. Impeller dia 4.625 in, rated at 135 gpm at 70 ft TDH. All mounted on bedplate. Physical size 39.25" long x 12" wide x 15.44 inches tall. Driven by (HP/rpm/voltage/frame) 7.5/3600/230/213T....
Split Case Pump
Asset ID: 6574
Available: 1
Aurora Pump 8" split case centrifugal water pump. No. 91-10426, Type 411 SF. Size 8x8x11B. 2000 GPM. 120 Ft. head. 1750 RPM. Powered by a 75 HP General Electric motor. Model 5K365BL21502, S/N R66141250. 1780 RPM. 230/460V, 3 Ph., 60Hz, 175/88A.
Asset ID: 6574
Available: 1
Split Case Pump
Aurora Pump 8" split case centrifugal water pump. No. 91-10426, Type 411 SF. Size 8x8x11B. 2000 GPM. 120 Ft. head. 1750 RPM. Powered by a 75 HP General Electric motor. Model 5K365BL21502, S/N R66141250. 1780 RPM. 230/460V, 3 Ph., 60Hz, 175/88A.
Hydraulic Pump Unit
Asset ID: AF10
Available: 1
### Hydraulic Pump Module
Rexroth hydraulic pump in sound attenuating enclosure. Enclosure size 50" x 46" x 57" tall. Reservoir capacity 250 liter (60 gallons). Max rated 350 bar (5,250 psig). Driven by 25 HP motor 1760 rpm 460/3/60.
Part of Outotec Laroc Filter Press
Asset ID: AF10
Available: 1
Hydraulic Pump Unit
### Hydraulic Pump Module Rexroth hydraulic pump in sound attenuating enclosure. Enclosure size 50" x 46" x 57" tall. Reservoir capacity 250 liter (60 gallons). Max rated 350 bar (5,250 psig). Driven by 25 HP motor 1760 rpm 460/3/60. Part of Outotec Laroc Filter Press
Non-Seal Pump
Asset ID: 2031
Available: 1
Nikkiso non-seal pump (sealless). This pump is new unused. still in original crate. Also called canned-motor pumps. Leak free pump best suited for use with chemical industry for metering critical chemicals/fluids. Nikkiso Non-Seal Pump Model HX22C-5 Item No 3027-1200-7, Designed for 30 gpm at 129.7 Ft TDH. Output 4.96 HP 460v 3/60 3600 RPM. Ready to load
Asset ID: 2031
Available: 1
Non-Seal Pump
Nikkiso non-seal pump (sealless). This pump is new unused. still in original crate. Also called canned-motor pumps. Leak free pump best suited for use with chemical industry for metering critical chemicals/fluids....
Centrifugal Pump ss
Asset ID: PC-7901
Available: 1
Goulds centrifugal pump, model 3196 MTX. Casing & impeller are stainless steel CD4MCU (corrosion and abrasive resistant). Size 2X3-10 with 7.125" impeller designed for 270 gpm at 193 ft TDH. Mechanical seal. Sn A734F846. Driven by 30 HP motor 3600 rpm TEFC frame 286TS 460/3/60. All mounted on baseplate. Physical size 52" long x 15" wide x 22.3" tall, weight 906 pounds. Pump specs, pump curver, and dimensions available in linked drawing. Used as a Reclaim Water Pump.
Asset ID: PC-7901
Available: 1
Centrifugal Pump ss
Goulds centrifugal pump, model 3196 MTX. Casing & impeller are stainless steel CD4MCU (corrosion and abrasive resistant). Size 2X3-10 with 7.125" impeller designed for 270 gpm at 193 ft TDH. Mechanical seal. Sn A734F846. Driven by 30 HP motor 3600 rpm TEFC frame 286TS 460/3/60....
High Shear Pump Mixer Reactor
Asset ID: 7528-3
Available: 1
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1902. NEW old stock from 2007 - never used. . This shear pump and and motor were spare. Direct Drive inline shear mixer. Have DRS fine generator in them currently rated at 30 gpm. The lower-priced ULTRA-TURRAX UTL 1000 machines are particularly multifunctional and are used for the mixing, dispersing (emulsifying/suspending) and homogenizing of solid and liquid substances up to viscosities of several thousand mPa·s. Nominal flow 30 gpm (8000 l/hr), as a shear pump to 35 gpm. Pressure to 16 bar. Inlet/Outlet 2". Motor 20 HP 460/3/60 3530 rpm. One of these 4 units is serial number 1903. See data sheet for details. Removed and ready for loading.
Asset ID: 7528-3
Available: 1
High Shear Pump Mixer Reactor
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1902. NEW old stock from 2007 - never used. . This shear pump and and motor were spare. Direct Drive inline shear mixer. Have DRS fine generator in them currently rated at 30 gpm....
Pump,Sanitary Centrifugal
Asset ID: 5993
Available: 1
Stainless Steel close coupled sanitary centrifugal pump. Waukesha S-line Model C218. 2 x 1 1/2 - 8. Max capacity 217 gpm @ 42 ft head. Gator Motor is 5 HP, 1765 rpm 460v 3/60. All wetted parts are stainless 316L. Open impeller design for easy cleaning, CIP capability.
Asset ID: 5993
Available: 1
Pump,Sanitary Centrifugal
Stainless Steel close coupled sanitary centrifugal pump. Waukesha S-line Model C218. 2 x 1 1/2 - 8. Max capacity 217 gpm @ 42 ft head. Gator Motor is 5 HP, 1765 rpm 460v 3/60. All wetted parts are stainless 316L. Open impeller design for easy cleaning, CIP capability.
Vertical Turbine Pump
Asset ID: P-4300A
Available: 1
Worthington QL double suction vertical turbine cooling tower pump. Model 12QL147. 3 stage design with 16 inch discharge. Designed for 7,000 GPM @ 167' head. With 400 HP Siemens-Allis motor. 4000V, 52.8A, 60Hz, 3 phase, 1780 RPM. Pump and motor rebuilt in 2009. Idled since 2013
Asset ID: P-4300A
Available: 1
Vertical Turbine Pump
Worthington QL double suction vertical turbine cooling tower pump. Model 12QL147. 3 stage design with 16 inch discharge. Designed for 7,000 GPM @ 167' head. With 400 HP Siemens-Allis motor. 4000V, 52.8A, 60Hz, 3 phase, 1780 RPM. Pump and motor rebuilt in 2009. Idled since 2013
Cooling Water Booster Pump
Asset ID: PC-7103
Available: 1
Goulds centrifugal pump, model 3196. Size 4X6-10G driven by (HP/rpm/voltage/frame) 20/1800/460/256T motor. Used as a Cooling Water Booster Pump sn A734F841.
Asset ID: PC-7103
Available: 1
Cooling Water Booster Pump
Goulds centrifugal pump, model 3196. Size 4X6-10G driven by (HP/rpm/voltage/frame) 20/1800/460/256T motor. Used as a Cooling Water Booster Pump sn A734F841.
Peristaltic Pump
Asset ID: AF15
Available: 1
Verderflex peristaltic pump by Verder. Model VF65 FCNBSS/S, serial 43260B6. Driven by gearmotor SEW 7.5 KW (10HP) at 1775 rpm inverter duty. Material cast iron body/cast iron rotor. Physical size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev. Flow capacity controlled by VFD and ranges from approx. 60 gpm at 75 psig to 90 gpm at 10 psig. See pump curves in Link. Maximum solids content 16.25mm compressible. Maximum lift is 9.5 mWc (meters water column)
Asset ID: AF15
Available: 1
Peristaltic Pump
Verderflex peristaltic pump by Verder. Model VF65 FCNBSS/S, serial 43260B6. Driven by gearmotor SEW 7.5 KW (10HP) at 1775 rpm inverter duty. Material cast iron body/cast iron rotor. Physical size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev....
Peristaltic Pump
Asset ID: AF96
Available: 1
Larox Flowsvs peristaltic pump, capacity 0.33 gpm per revolution 150 psig max (max flow 35.2 gpm). Model LPP-T40. Hose connections 1.5". Size 1070 wide including motor x 742 deep x 664 tall. Gear motor is SEW gearmotor model KAF67 at 5.5 KW (7.5 HP). Used as transfer pump.
Larox is now known as Flowrox. Material cast iron. These pumps incorporate an advanced rolling design which eliminates friction, maximizes hose life, and lowers energy consumption. Ideal for pumping abrasive, corrosive, viscous, or crystallizing slurries.
Asset ID: AF96
Available: 1
Peristaltic Pump
Larox Flowsvs peristaltic pump, capacity 0.33 gpm per revolution 150 psig max (max flow 35.2 gpm). Model LPP-T40. Hose connections 1.5". Size 1070 wide including motor x 742 deep x 664 tall. Gear motor is SEW gearmotor model KAF67 at 5.5 KW (7.5 HP). Used as transfer pump....
Positive Displacement Pump
Asset ID: 7139I
Available: 1
Bare pump - Viking Pump Model LQ4124R, Serial No. 1702284, Size is 2.5" inlet x 2.5" outlet, cast iron body with mechanical seal. Includes integral relief valve in head, Has gear unit. Nominal flow of 135 gpm,. Approx 125 gpm. Designed to be driven by 10HP motor but motor is not included (photo shows motor but it is not there). . Used - will need reconditioning
Asset ID: 7139I
Available: 1
Positive Displacement Pump
Bare pump - Viking Pump Model LQ4124R, Serial No. 1702284, Size is 2.5" inlet x 2.5" outlet, cast iron body with mechanical seal. Includes integral relief valve in head, Has gear unit. Nominal flow of 135 gpm,. Approx 125 gpm....
Cooling Tower Pump
Asset ID: PC-7101C
Available: 1
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds. Was pumping water; Used as a Cooling Tower Pump.
Asset ID: PC-7101C
Available: 1
Cooling Tower Pump
Goulds centrifugal pump, model 3410L. Size 10x12-17 with 15.75" imp dia designed for 5,185 gpm at 198 ft TDH. Driven by 350 HP motor 1800 rpm 4160v. Frame G5008Z. All mounted on bedplate, Estimated physical size 40" x 96" long x 37" tall. Weight 7705 pounds....
Positive Displacement Pump
Asset ID: 7139A
Available: 1
Viking positive displacement pump. Model LL4124A. Size 3x3, LL4124 is rated up to 140 gpm. Includes 30 HP Reliance Electric motor @ 1765 RPM. 230/460V, 72.6/39.3A. Used - will need reconditioning. Price includes loading on your truck.
Asset ID: 7139A
Available: 1
Positive Displacement Pump
Viking positive displacement pump. Model LL4124A. Size 3x3, LL4124 is rated up to 140 gpm. Includes 30 HP Reliance Electric motor @ 1765 RPM. 230/460V, 72.6/39.3A. Used - will need reconditioning. Price includes loading on your truck.
Centrifugal Pump SS
Asset ID: 7137A
Available: 1
Summit centrifugal pump, stainless steel wetted parts. Model 2196. Size 3 x 4-13, impeller dia 12.25. ser 331303. Originally designed fo a 40HP Baldor electric motor @ 1760 RPM. 230/460V. We are offering ss pump, bedplate - Only. If you want motor, please add $400 and we will mount a used working TEFC 40 HP motor on pump/bedplate. Price includes loading on your truck
Asset ID: 7137A
Available: 1
Centrifugal Pump SS
Summit centrifugal pump, stainless steel wetted parts. Model 2196. Size 3 x 4-13, impeller dia 12.25. ser 331303. Originally designed fo a 40HP Baldor electric motor @ 1760 RPM. 230/460V. We are offering ss pump, bedplate - Only....
Centrifugal Pump
Asset ID: PC-4204V
Available: 1
Sulzer centrifugal pump, model CPT 12-1B. Size driven by (HP/rpm/voltage/frame) 15/460/3600/254T motor. Used as a Vaporizer Feed Pump sn 100091659.
Asset ID: PC-4204V
Available: 1
Centrifugal Pump
Sulzer centrifugal pump, model CPT 12-1B. Size driven by (HP/rpm/voltage/frame) 15/460/3600/254T motor. Used as a Vaporizer Feed Pump sn 100091659.
Centrifugal Pump, ss
Asset ID: 5994
Available: 1
Waukesha Cherry Burrell Centrifugal Pump, stainless steel. Close coupled with motor.10 HP Baldor-Reliance- 2x2. S/N 1000002442475
Asset ID: 5994
Available: 1
Centrifugal Pump, ss
Waukesha Cherry Burrell Centrifugal Pump, stainless steel. Close coupled with motor.10 HP Baldor-Reliance- 2x2. S/N 1000002442475
High Shear Pump Mixer Reactor
Asset ID: 7528-1
Available: 1
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1903. Direct Drive inline shear mixer: Have DRS fine generator in them currently rated at 30 gpm. The lower-priced ULTRA-TURRAX UTL 1000 machines are particularly multifunctional and are used for the mixing, dispersing (emulsifying/suspending) and homogenizing of solid and liquid substances up to viscosities of several thousand mPa·s. Nominal flow 30 gpm (8000 l/hr), as a shear pump to 35 gpm. Pressure to 16 bar. Inlet/Outlet 2". Motor 20 HP 460/3/60 3530 rpm. On of these 4 units is serial number 1903. See data sheet for details. Removed and ready for loading.
Asset ID: 7528-1
Available: 1
High Shear Pump Mixer Reactor
High Shear Mixers - IKA Series UTL 1000/10. Serial number 1903. Direct Drive inline shear mixer: Have DRS fine generator in them currently rated at 30 gpm....
Vertical Centrifugal Sump Pump
Asset ID: PC-7907
Available: 1
Goulds centrifugal pump, model 3172. Size 4X6-11 capacity from 600 gpm to 1000 gpm depending on head. Driven by 20HP motor 1770 rpm 460v. Used as a Main Collection Sump Pump #2.