Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Include all
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Pump'
126 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Include all
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Pump, Split Case
Asset ID: 7412
Available: 1
Worthington Split case pump. Model 5LN-22. Size is 8" x 5" - 22" Impeller, epoxy lined. Rated at 1250 gpm at 420 ft TDH. (Requires 250 HP motor 1775 rpm not included). See pump curve in document links This pump has been rebuilt and was never used after rebuild. Used as a back up fire pump so it is high head. Rebuilt by HydroAire Services job # 6082-12-11-11. Rotation: GREY pump looking at the shaft, rotation is counter clockwise. Note Worthington pumps are now backed by Flowserve. Bare pump only - Grey. Shipping dimensions 48 x 48 x 45" tall, 1350 pounds.
Asset ID: 7412
Available: 1
Pump, Split Case
Worthington Split case pump. Model 5LN-22. Size is 8" x 5" - 22" Impeller, epoxy lined. Rated at 1250 gpm at 420 ft TDH. (Requires 250 HP motor 1775 rpm not included). See pump curve in document links This pump has been rebuilt and was never used after rebuild....
Sump Pump
Asset ID: 1945
Available: 1
Vertical sump pump by Pumpworks model 820. New - stored in warehouse as spare. Size 1.5 x 1 -8 with 8" impeller. Material carbon steel, heavy duty configuration. Rated capacity 25 gpm at 58 ft TDH. Pump serial number 18-23305-8-1. Motor is Baldor 2 HP 1755 rpm 230/460v 3/60 TEFC Frame 145TC
Asset ID: 1945
Available: 1
Sump Pump
Vertical sump pump by Pumpworks model 820. New - stored in warehouse as spare. Size 1.5 x 1 -8 with 8" impeller. Material carbon steel, heavy duty configuration. Rated capacity 25 gpm at 58 ft TDH. Pump serial number 18-23305-8-1. Motor is Baldor 2 HP 1755 rpm 230/460v 3/60 TEFC Frame 145TC
Gear Pump
Asset ID: X2007
Available: 1
Small positive displacement pump (gear pump probably). Specs unknown. Pump by FFA Pot.
Asset ID: X2007
Available: 1
Gear Pump
Small positive displacement pump (gear pump probably). Specs unknown. Pump by FFA Pot.
Positive Displacement Pump
Asset ID: X2012
Available: 1
Viking positive displacement pump. Specs unknown - lste used as pump from Glycerin settler
Asset ID: X2012
Available: 1
Positive Displacement Pump
Viking positive displacement pump. Specs unknown - lste used as pump from Glycerin settler
Positive Displacement Pump
Asset ID: X2013
Available: 1
Positive displacement pump. Specs unknown - last used as a Stripper feed pump
Asset ID: X2013
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as a Stripper feed pump
Positive Displacement Pump
Asset ID: X2019
Available: 1
Positive displacement pump - probably gear. Specs unknown - last used as Small pump located under glycerin coalescer
Asset ID: X2019
Available: 1
Positive Displacement Pump
Positive displacement pump - probably gear. Specs unknown - last used as Small pump located under glycerin coalescer
Positive Dispacement Pump
Asset ID: X2020
Available: 1
Positive displacement pump, probably Gorman Rupp gear pump. Specs unknown - last used as Larger pump under glycerin coalescer
Asset ID: X2020
Available: 1
Positive Dispacement Pump
Positive displacement pump, probably Gorman Rupp gear pump. Specs unknown - last used as Larger pump under glycerin coalescer
Condensate Pump
Asset ID: X2043
Available: 1
Centrifugal condensate pump at condensate receiver. Vertical. Driven by 5HP motor. Specs unknown
Asset ID: X2043
Available: 1
Condensate Pump
Centrifugal condensate pump at condensate receiver. Vertical. Driven by 5HP motor. Specs unknown
Positive Displacement Pump
Asset ID: X2046
Available: 1
Positive displacement pump. Specs unknown - last used as Settler pump.
Asset ID: X2046
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as Settler pump.
Positive Dispacement Pump
Asset ID: X2049
Available: 1
Positive displacement pump. Specs unknown - last used as MRU pump.
Asset ID: X2049
Available: 1
Positive Dispacement Pump
Positive displacement pump. Specs unknown - last used as MRU pump.
Vertical Centrifugal Pump
Asset ID: X2051
Available: 1
Vertical centrifugal pump. Specs unknown - last used as Scrubber pump.
Asset ID: X2051
Available: 1
Vertical Centrifugal Pump
Vertical centrifugal pump. Specs unknown - last used as Scrubber pump.
Positive Displacement Pump
Asset ID: X2054
Available: 1
Positive displacement pump. Specs unnown - last used as Knockout Pot Pump
Asset ID: X2054
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unnown - last used as Knockout Pot Pump
Positive Displacement Pump
Asset ID: X2059
Available: 1
Positive displacement pump. Specs unknown - last used as MRU Bio Cooler South
Asset ID: X2059
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as MRU Bio Cooler South
Centrifugal Pump
Asset ID: X2062
Available: 1
Centrifugal pump. Specs unknown - last used as Break Tank Pump
Asset ID: X2062
Available: 1
Centrifugal Pump
Centrifugal pump. Specs unknown - last used as Break Tank Pump
Positive Displacement Pump
Asset ID: X2065
Available: 1
Positive displacement pump. Specs unknown - last used as HydraSep 1 Pump
Asset ID: X2065
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as HydraSep 1 Pump
Positive Displacement Pump
Asset ID: X2067
Available: 1
Gorman Rupp positive displaceent pump. Specs unknown - last Used as Hydra Sep 2 Pump
Asset ID: X2067
Available: 1
Positive Displacement Pump
Gorman Rupp positive displaceent pump. Specs unknown - last Used as Hydra Sep 2 Pump
Positive Displacement Pump
Asset ID: X2071
Available: 1
Positive displacement pump. Specs unknown - last used as VLF Feedpump
Asset ID: X2071
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as VLF Feedpump
Centrifugal Pump
Asset ID: X2072
Available: 1
Centrifugal pump. Specs unknown - last used as Precoat Pump
Asset ID: X2072
Available: 1
Centrifugal Pump
Centrifugal pump. Specs unknown - last used as Precoat Pump
Centrifugal Pump
Asset ID: X2074
Available: 1
Centrifugal pump. Specs unknowm - last used as Cold Soak Pump West
Asset ID: X2074
Available: 1
Centrifugal Pump
Centrifugal pump. Specs unknowm - last used as Cold Soak Pump West
Positive Dislacement Pump
Asset ID: X2079
Available: 1
Positve displacement pump. Specs unknown - last used as RDO pump
Asset ID: X2079
Available: 1
Positive Dislacement Pump
Positve displacement pump. Specs unknown - last used as RDO pump
Positive Dsplacement Pump
Asset ID: X2082
Available: 1
Positive displacement pump. Specs unknown - last used as settling tank 1 pump
Asset ID: X2082
Available: 1
Positive Dsplacement Pump
Positive displacement pump. Specs unknown - last used as settling tank 1 pump
Positive Displacement Pump
Asset ID: X2091
Available: 1
Positive dispacement pump. Specs unknown - last used as crude tank pump
Asset ID: X2091
Available: 1
Positive Displacement Pump
Positive dispacement pump. Specs unknown - last used as crude tank pump
Positive Displacement Pump
Asset ID: X2092
Available: 1
Positive displacement pump. Specs unknown - last used as oil dryer pump
Asset ID: X2092
Available: 1
Positive Displacement Pump
Positive displacement pump. Specs unknown - last used as oil dryer pump
Centrifugal Pump ss
Asset ID: X2104
Available: 1
Goulds centrifugal pump, model 3196. Size 1.5 x 3-8 with 5.5 inch impeller. 3600 rpm. Designed for 92 gpm at 102 ft TDH. Material CD4MCU - stainless steel. Includes pump, motor, coupling, and bedplate
Asset ID: X2104
Available: 1
Centrifugal Pump ss
Goulds centrifugal pump, model 3196. Size 1.5 x 3-8 with 5.5 inch impeller. 3600 rpm. Designed for 92 gpm at 102 ft TDH. Material CD4MCU - stainless steel. Includes pump, motor, coupling, and bedplate
Vertical Multistage Pumps and MCC
Asset ID: PK-2097
Available: 2
Simflo Vertical 7-stage Multistage pump. Motor is 300 HP, 3565 rpm 460v 3/60 inverter duty. Model SD10C. (New model cross references to SP10L - same pump). Pump designed for 600 gpm at 1245 ft TDH. Includes MCC with VFD drives and the portable building the MCC is in.
* You are only purchasing two pumps with motors (no piping or anything in background of the pictures). Purchase DOES include complete MCC building w/ VFD's and MCC. Will be an oversized load. Price is for the LOT.
Package Includes:
- Two (2) Simflo (Simmons) Vertical pumps
Model SD10C (SP10L is new model # but same pump)
7-Stage, 600 gpm at 1245 ft/head, 300 HP
Bowl dia 10.19", BEP head 158 ft per stage
- MCC Portable Building
- MCC 4000A Cutler-Hammer Advantage Series 2100
480 V 3 Phase 3-wire 60 Hz
3200 A Sect.1-2 800 amp Sect.3-5 1200 amp
w/ 4000 amp Main and Breakers for each VFD/pump and includes spare breaker
- Starters installed in MCC
(2) Allen-Bradley VFD's - CAT # 1336E-BP350-AN-CM-EN
AC Input: 300-378 KVA 380-480 V 455 amps 50/60 Hz 3 Phase
AC Output: 366 KVA 0-460 V 459.2 amps 0-400 Hz 3 Phase
- Allen Bradley PanelView 1000 plc controls
This pump package is used. It was in good working order when idled and removed in late 2023. Units are removed and ready to load.
Asset ID: PK-2097
Available: 2
Vertical Multistage Pumps and MCC
Simflo Vertical 7-stage Multistage pump. Motor is 300 HP, 3565 rpm 460v 3/60 inverter duty. Model SD10C. (New model cross references to SP10L - same pump). Pump designed for 600 gpm at 1245 ft TDH. Includes MCC with VFD drives and the portable building the MCC is in....
Positive Displacement Pump 3x3
Asset ID: 7139A
Available: 1
Viking positive displacement pump. Model LL4124A, ser no. 11297045 . Size 3 x 3, LL4124A - pump is rated up to 140 gpm. Includes pump, gearbox ratio 3.705 (IN 1750 / OUT 472 rpm), baseplate - no motor (was sized for 30HP motor at 1750 rpm missing). Used - will need reconditioning; it has sat idle for quite a while. Price includes loading on your truck.
Asset ID: 7139A
Available: 1
Positive Displacement Pump 3x3
Viking positive displacement pump. Model LL4124A, ser no. 11297045 . Size 3 x 3, LL4124A - pump is rated up to 140 gpm. Includes pump, gearbox ratio 3.705 (IN 1750 / OUT 472 rpm), baseplate - no motor (was sized for 30HP motor at 1750 rpm missing)....
Vacuum Ejector Pump
Asset ID: S3210
Available: 1
PIAB air driven vacuum ejector. Model M125D, series 21.01.010. Vacuum gauge can be placed on either side. Cross references to PIAB model M50B5-EN . Very little use, in original box
Asset ID: S3210
Available: 1
Vacuum Ejector Pump
PIAB air driven vacuum ejector. Model M125D, series 21.01.010. Vacuum gauge can be placed on either side. Cross references to PIAB model M50B5-EN . Very little use, in original box
Feedwater Pumps
Asset ID: X3146
Available: 2
Tru20 Vertical multistage stainless steel pumps. Model OVIMF32-20. Stainless steel CF8. 10 HP motor. Sized for 175 gpm at 140 ft TDH. Quantity (2), priced separately.
Asset ID: X3146
Available: 2
Feedwater Pumps
Tru20 Vertical multistage stainless steel pumps. Model OVIMF32-20. Stainless steel CF8. 10 HP motor. Sized for 175 gpm at 140 ft TDH. Quantity (2), priced separately.
Hydraulic Power Pack
Asset ID: X3153
Available: 1
Hydraulic power pack with two 30 HP pumps and reservoir. Hydraulic pump is Continental Hydraulics, Model PVX-15B30-RF-P-1S17-B. Max pressure 3000 psi
Asset ID: X3153
Available: 1
Hydraulic Power Pack
Hydraulic power pack with two 30 HP pumps and reservoir. Hydraulic pump is Continental Hydraulics, Model PVX-15B30-RF-P-1S17-B. Max pressure 3000 psi
Centrifugal Pump
Asset ID: X3203
Available: 1
Centrifugal pump. Use: For above tank
Asset ID: X3203
Available: 1
Centrifugal Pump
Centrifugal pump. Use: For above tank
Pump, Positive Displacement
Asset ID: X3208
Available: 1
Positive displacement pump
Asset ID: X3208
Available: 1
Pump, Positive Displacement
Positive displacement pump
Pump, Positive Displacement
Asset ID: X3209
Available: 1
Positive displacement pump
Asset ID: X3209
Available: 1
Pump, Positive Displacement
Positive displacement pump
Pump, Positive Displacement
Asset ID: X3242
Available: 1
Positive displacement pump
Asset ID: X3242
Available: 1
Pump, Positive Displacement
Positive displacement pump
Pump, Centrifugal
Asset ID: X3243
Available: 1
Centrifugal Pump
Asset ID: X3243
Available: 1
Pump, Centrifugal
Centrifugal Pump
Pump, Centrifugal
Asset ID: X3248
Available: 1
Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3248
Available: 1
Pump, Centrifugal
Hexane solvent pump for Crown extractor, centrifugal pump
Pump, Centrifugal
Asset ID: X3249
Available: 1
Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3249
Available: 1
Pump, Centrifugal
Hexane solvent pump for Crown extractor, centrifugal pump
Pump, Centrifugal
Asset ID: X3250
Available: 1
Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3250
Available: 1
Pump, Centrifugal
Hexane solvent pump for Crown extractor, centrifugal pump
Pump, Centrifugal
Asset ID: X3251
Available: 1
Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3251
Available: 1
Pump, Centrifugal
Hexane solvent pump for Crown extractor, centrifugal pump
Pump, Centrifugal
Asset ID: X3252
Available: 1
Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3252
Available: 1
Pump, Centrifugal
Hexane solvent pump for Crown extractor, centrifugal pump
Pump, Centrifugal
Asset ID: X3253
Available: 1
Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3253
Available: 1
Pump, Centrifugal
Hexane solvent pump for Crown extractor, centrifugal pump
Pump, Centrifugal
Asset ID: X3254
Available: 1
Hexane solvent pump for Crown extractor, centrifugal pump
Asset ID: X3254
Available: 1
Pump, Centrifugal
Hexane solvent pump for Crown extractor, centrifugal pump
Pump, Positive Displacement
Asset ID: X3257
Available: 1
Positive displacements - priced or the LOT of 4
Asset ID: X3257
Available: 1
Pump, Positive Displacement
Positive displacements - priced or the LOT of 4
Split Case Pump, Cooling Tower
Asset ID: X3217
Available: 1
Aurora Split case pump for cooling tower water. Model 10x12x12B,type 411BF. Serial no. 17-2510991. Sized for 3500 gpm at 75 ft TDH. Pump rpm 1775. . Motor 100 HP. Use: CT pump north
Asset ID: X3217
Available: 1
Split Case Pump, Cooling Tower
Aurora Split case pump for cooling tower water. Model 10x12x12B,type 411BF. Serial no. 17-2510991. Sized for 3500 gpm at 75 ft TDH. Pump rpm 1775. . Motor 100 HP. Use: CT pump north
Split Case Pump, Cooling Tower
Asset ID: X3218
Available: 1
Aurora Split case pump for cooling tower water. Model 10x12x12B,type 411BF. Serial no. 17-2510991. Sized for 3500 gpm at 75 ft TDH. Pump rpm 1775. Motor 100 HP. Use: East pump
Asset ID: X3218
Available: 1
Split Case Pump, Cooling Tower
Aurora Split case pump for cooling tower water. Model 10x12x12B,type 411BF. Serial no. 17-2510991. Sized for 3500 gpm at 75 ft TDH. Pump rpm 1775. Motor 100 HP. Use: East pump
Split Case Pump, Cooling Tower
Asset ID: X3220
Available: 1
Aurora Pentair split case pump, sixe 4x5x15, type 411 BF. Ser no.18-2545920-1. Use: BD cooling water
Asset ID: X3220
Available: 1
Split Case Pump, Cooling Tower
Aurora Pentair split case pump, sixe 4x5x15, type 411 BF. Ser no.18-2545920-1. Use: BD cooling water
Split Case Pump, Cooling Tower
Asset ID: X3221
Available: 1
Aurora Split case pump for cooling tower water. Model 10x12x12B,type 411BF. Serial no. 17-2510991. Sized for 3500 gpm at 75 ft TDH. Pump rpm 1760. Motor 100 HP. Use: West pump
Asset ID: X3221
Available: 1
Split Case Pump, Cooling Tower
Aurora Split case pump for cooling tower water. Model 10x12x12B,type 411BF. Serial no. 17-2510991. Sized for 3500 gpm at 75 ft TDH. Pump rpm 1760. Motor 100 HP. Use: West pump
Centrifugal Pump, Cooling Tower
Asset ID: X3219
Available: 1
MCM centrifugal pump, extra heavy duty. Size 5x6x14 with Impeller dia 14" ser no. 28152 Ductile iron. Shaft 2.5" with relaceable sleeve. Driven by explosion proof 100 HP motor at 1785 rpm. See pump curve - approx 1200 gpm at 180 ft TDH. Use: South pump
Asset ID: X3219
Available: 1
Centrifugal Pump, Cooling Tower
MCM centrifugal pump, extra heavy duty. Size 5x6x14 with Impeller dia 14" ser no. 28152 Ductile iron. Shaft 2.5" with relaceable sleeve. Driven by explosion proof 100 HP motor at 1785 rpm. See pump curve - approx 1200 gpm at 180 ft TDH. Use: South pump
hydraulic Pump Skid
Asset ID: X3385
Available: 1
Skid with two pumps and hydraulic reservoir
Asset ID: X3385
Available: 1
hydraulic Pump Skid
Skid with two pumps and hydraulic reservoir
Centrifugal Pump
Asset ID: X3392
Available: 1
Centrifugal pump with motor on baseplate
Asset ID: X3392
Available: 1
Centrifugal Pump
Centrifugal pump with motor on baseplate
Centrifugal Pump
Asset ID: X3396
Available: 1
Centrifugal pump with motor on baseplate
Asset ID: X3396
Available: 1
Centrifugal Pump
Centrifugal pump with motor on baseplate
Vertical Pump
Asset ID: X3405
Available: 1
Multi stage vertical pump with motor
Asset ID: X3405
Available: 1
Vertical Pump
Multi stage vertical pump with motor
Vertical Pumps
Asset ID: X3525
Available: 1
(2) Goulds vertical multistage pumps. Model 66SV21GL4F60 with 20 HP motor. ESV 4X4X5-2P-PM
Asset ID: X3525
Available: 1
Vertical Pumps
(2) Goulds vertical multistage pumps. Model 66SV21GL4F60 with 20 HP motor. ESV 4X4X5-2P-PM
Vacuum Pump
Asset ID: V2206
Available: 1
Vacubrand 4C vacuum pump, Model MD 4C NT. Thee-stage diaphragm pump rated at 2.2 cfm and max vacuum 1.1 torr. Has 4 heads, 3 stages
Asset ID: V2206
Available: 1
Vacuum Pump
Vacubrand 4C vacuum pump, Model MD 4C NT. Thee-stage diaphragm pump rated at 2.2 cfm and max vacuum 1.1 torr. Has 4 heads, 3 stages
Self Priming Pump 3"
Asset ID: V2225
Available: 1
AMT self priming cast iron centrifugal pump Model 2876-96. Pump 3 1/4 x 3 1/4 AMT pump with 7.5 HP motor. Lot 114. See pump curve - approx 250 gpm at 60 ft TDH
Asset ID: V2225
Available: 1
Self Priming Pump 3"
AMT self priming cast iron centrifugal pump Model 2876-96. Pump 3 1/4 x 3 1/4 AMT pump with 7.5 HP motor. Lot 114. See pump curve - approx 250 gpm at 60 ft TDH
Metering Peristaltic Pump
Asset ID: V2230
Available: 1
Flex Pro peristaltic metering pump A2F series. Max feed 14.3 GPH and 50 psi, 3/8 inch OD tubing 115v. Serial # 000908938-180716
Asset ID: V2230
Available: 1
Metering Peristaltic Pump
Flex Pro peristaltic metering pump A2F series. Max feed 14.3 GPH and 50 psi, 3/8 inch OD tubing 115v. Serial # 000908938-180716
Self Priming Pump
Asset ID: V2231
Available: 1
AMT centrifugal pump 429K-X8 self priming driven by 1 3/4 HP motor. Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal.
Asset ID: V2231
Available: 1
Self Priming Pump
AMT centrifugal pump 429K-X8 self priming driven by 1 3/4 HP motor. Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6....
High Shear Mixer ss
Asset ID: V2232
Available: 1
Silverson inline high shear mixer model 275LSB1759 stainless steel, Inline mixer/emulsifier. Sanitary connections. Driven by 2HP motor
Asset ID: V2232
Available: 1
High Shear Mixer ss
Silverson inline high shear mixer model 275LSB1759 stainless steel, Inline mixer/emulsifier. Sanitary connections. Driven by 2HP motor
Centrifugal Pump
Asset ID: V2233
Available: 4
AMT centrifugal pump 429K-X8 driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal.. Qty(4) - priced separately
Asset ID: V2233
Available: 4
Centrifugal Pump
AMT centrifugal pump 429K-X8 driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6....
Centrifugal Pump
Asset ID: V2249
Available: 1
AMT self priming centrifugal pump model 2876-95. Approx capacity 250 gpm at 60 ft TDH. Driven by 7.5 HP motor 3525 rpm 460/3/60
Asset ID: V2249
Available: 1
Centrifugal Pump
AMT self priming centrifugal pump model 2876-95. Approx capacity 250 gpm at 60 ft TDH. Driven by 7.5 HP motor 3525 rpm 460/3/60
Centrifugal Pump
Asset ID: V2250
Available: 6
AMT self priming centrifugal pump model 2875-95. Driven by 5 HP motor 3525 rpm 460/3/60. Approx capacity 250 gpm at 60 ft TDH. Quantity (6), priced separately
Asset ID: V2250
Available: 6
Centrifugal Pump
AMT self priming centrifugal pump model 2875-95. Driven by 5 HP motor 3525 rpm 460/3/60. Approx capacity 250 gpm at 60 ft TDH. Quantity (6), priced separately
Centrifugal Pump
Asset ID: V2262
Available: 1
AMT self priming centrifugal pump model 2875-95 driven by 5 HP motor 3550 rpm 480/3/60. Rate approx 250 gpm. See pump brochure
Asset ID: V2262
Available: 1
Centrifugal Pump
AMT self priming centrifugal pump model 2875-95 driven by 5 HP motor 3550 rpm 480/3/60. Rate approx 250 gpm. See pump brochure
Self Priming Centrifugal Pump
Asset ID: V2263
Available: 1
AMT centrifugal pump model 429K-X8 stainless steel driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal
Asset ID: V2263
Available: 1
Self Priming Centrifugal Pump
AMT centrifugal pump model 429K-X8 stainless steel driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6....
Self Priming Centrifugal Pump
Asset ID: V2269
Available: 1
Self Priming Centrifugal Pump with motor
Asset ID: V2269
Available: 1
Self Priming Centrifugal Pump
Self Priming Centrifugal Pump with motor
Centrifugal Pump
Asset ID: V2268
Available: 1
Cast iron self priming pump with motor
Asset ID: V2268
Available: 1
Centrifugal Pump
Cast iron self priming pump with motor
Pump
Asset ID: V2270
Available: 1
AMT centrifugal pump model 429K-X8 stainless steel driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use in hazardous liquids. These 1" pumps are fitted with FKM mechanical seal and O-ring. Self-priming to 6 feet. Type 6 seal
Asset ID: V2270
Available: 1
Pump
AMT centrifugal pump model 429K-X8 stainless steel driven by 1 3/4 HP motor. Stainless steel 1 inch centrifugal pump Max flow 33 gpm at 42 ft TDH. Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6....
Plunger Pump
Asset ID: P-207A
Available: 1
DXP Cat Pump 1DXM7562T, 10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as PW HP Feed pump
Asset ID: P-207A
Available: 1
Plunger Pump
DXP Cat Pump 1DXM7562T, 10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as PW HP Feed pump
Peristaltic Pump
Asset ID: AF16
Available: 1
PC-31 Slurry Stock. Verderflex peristaltic pump by Verder. Model VF65, serial 43260E6. Driven by gearmotor Baldor 10Hp at 1760 rpm inverter duty. Gearbox ratio 38.4:1. Material cast iron body/cast iron rotor. Size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev. Flow capacity controlled by VDF and ranges from approx. 60 gpm at 75 psig to 90 gpm at 10 psig. See pump curves in Link. Maximum solids content 16.25mm compressible. Maximum lift is 9.5 mWc (meters water column)
Asset ID: AF16
Available: 1
Peristaltic Pump
PC-31 Slurry Stock. Verderflex peristaltic pump by Verder. Model VF65, serial 43260E6. Driven by gearmotor Baldor 10Hp at 1760 rpm inverter duty. Gearbox ratio 38.4:1. Material cast iron body/cast iron rotor. Size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev....
Pump
Asset ID: BD-1511
Available: 1
Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004312,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as Pump from BD Dryer
Asset ID: BD-1511
Available: 1
Pump
Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004312,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as Pump from BD Dryer
Pump
Asset ID: P-705A
Available: 1
Pump 264 GPM, 138 Ft., 22.8 HP, 3600 RPM, 31 FLA
Asset ID: P-705A
Available: 1
Pump
Pump 264 GPM, 138 Ft., 22.8 HP, 3600 RPM, 31 FLA
PD pumps
Asset ID: XL95
Available: 1
Lot of Positive Displacment Pumps (5). For photos see LOT 95
Asset ID: XL95
Available: 1
PD pumps
Lot of Positive Displacment Pumps (5). For photos see LOT 95
Can Pump
Asset ID: P-201
Available: 1
Teikoku Canned Motor Pump F60-3211N4BL-0204F1-AV, s/n 2014004324, 22 GPM, 103 Ft, 5.3 HP, 3600 RPM, 8 Fla. Last used as Filtered FD Feed Pump
Asset ID: P-201
Available: 1
Can Pump
Teikoku Canned Motor Pump F60-3211N4BL-0204F1-AV, s/n 2014004324, 22 GPM, 103 Ft, 5.3 HP, 3600 RPM, 8 Fla. Last used as Filtered FD Feed Pump
Can Pump
Asset ID: P801
Available: 1
Teikoku Feedpump F64-215C4BM-0405S1V-AV, S/N CV-4637-2
Asset ID: P801
Available: 1
Can Pump
Teikoku Feedpump F64-215C4BM-0405S1V-AV, S/N CV-4637-2
Centrifugal Pump
Asset ID: P-1005A
Available: 1
Centrifugal Pump CPT31-6 Sulzer 100133882 8x6x13, 120 ft Head, 1500 USGPM, 1770 RPM Driven by 75 HP, 1770 RPM, 60 Hz Motor. Last used as Cooling Tower Pump
Asset ID: P-1005A
Available: 1
Centrifugal Pump
Centrifugal Pump CPT31-6 Sulzer 100133882 8x6x13, 120 ft Head, 1500 USGPM, 1770 RPM Driven by 75 HP, 1770 RPM, 60 Hz Motor. Last used as Cooling Tower Pump
Pump (Multi-Stage)
Asset ID: X4001
Available: 2
### Multi-Stage Pump ###
NEW
Goulds 22SV9GE30N e-SV Stainless Steel Series Vertical Multi-Stage Pump. CI-304 Configuration with 2" Connections. Bare pump only. Material ss304, Viton Standard Shaft Seal, 9 Stages, 116 GPM Nominal Flow, Low NPSH model. A Xylem Brand Product. Quantity (2) - priced separately.
Asset ID: X4001
Available: 2
Pump (Multi-Stage)
### Multi-Stage Pump ### NEW Goulds 22SV9GE30N e-SV Stainless Steel Series Vertical Multi-Stage Pump. CI-304 Configuration with 2" Connections. Bare pump only. Material ss304, Viton Standard Shaft Seal, 9 Stages, 116 GPM Nominal Flow, Low NPSH model. A Xylem Brand Product....
Can Pump
Asset ID: P-502
Available: 1
Teikoku Feed pump F60-3211N4BL-0204SF1-AV, S/N 2014004326, 15 gpm, 166 Ft. Hd, Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase, with VFD motor. Last used as ME Dryer Feed pump
Asset ID: P-502
Available: 1
Can Pump
Teikoku Feed pump F60-3211N4BL-0204SF1-AV, S/N 2014004326, 15 gpm, 166 Ft. Hd, Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase, with VFD motor. Last used as ME Dryer Feed pump
Feed Pump
Asset ID: P304
Available: 1
Teikoku F60-3211N4BL-0204SF1-AV, S/N 2015004881 Pump 20 GPM, 92 Ft, 5.3 HP, 3600 RPM, 8.0 FLA
Asset ID: P304
Available: 1
Feed Pump
Teikoku F60-3211N4BL-0204SF1-AV, S/N 2015004881 Pump 20 GPM, 92 Ft, 5.3 HP, 3600 RPM, 8.0 FLA
Explosion Proof Pumps (4)
Asset ID: 8576
Available: 4
Sanitary pump with explosion proof motor. Turbine pump for negative NPSH pressure to negative pressure 0.09 Mpa. Pump rated at 1 MT/hr at 30 m head (4.6 gpm at 98.4 ft TDH). Pump inlet/outlet 51mm/38mm. All stainless steel 316L. Motor is 2.2 KW (3 HP) at 3410 rpm 460v 3/60. Quantity (4) - priced separately
Asset ID: 8576
Available: 4
Explosion Proof Pumps (4)
Sanitary pump with explosion proof motor. Turbine pump for negative NPSH pressure to negative pressure 0.09 Mpa. Pump rated at 1 MT/hr at 30 m head (4.6 gpm at 98.4 ft TDH). Pump inlet/outlet 51mm/38mm. All stainless steel 316L. Motor is 2.2 KW (3 HP) at 3410 rpm 460v 3/60....
Centrifugal Pump
Asset ID: 7139B
Available: 1
Durco centrifugal pump. Size 2K 3x1.5-10/96. Serial 405665. Includes 50HP Marathon electric motor @ 3515 RPM. 230/460V, 116/80A. Used - will need reconditioning
Asset ID: 7139B
Available: 1
Centrifugal Pump
Durco centrifugal pump. Size 2K 3x1.5-10/96. Serial 405665. Includes 50HP Marathon electric motor @ 3515 RPM. 230/460V, 116/80A. Used - will need reconditioning
Plunger Pump
Asset ID: P-402A
Available: 1
CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as Methyl Ester HP Feed Pump.
Asset ID: P-402A
Available: 1
Plunger Pump
CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as Methyl Ester HP Feed Pump.
Can Pump
Asset ID: P-B100
Available: 1
Sulzer Pump CPT 21-3, No 100132829, 2725 RPM. Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as B100 Loading Station Pump
Asset ID: P-B100
Available: 1
Can Pump
Sulzer Pump CPT 21-3, No 100132829, 2725 RPM. Driven by 5.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as B100 Loading Station Pump
Liquid Ring Pump
Asset ID: P-111A
Available: 1
Busch vacuum pump 3.0 HP, 460 volts, 60 Hz, 3 phase. Last used as FD Filter Vacuum System
Asset ID: P-111A
Available: 1
Liquid Ring Pump
Busch vacuum pump 3.0 HP, 460 volts, 60 Hz, 3 phase. Last used as FD Filter Vacuum System
Can Pump
Asset ID: P-703
Available: 1
Teikoku feed pump 15 GPM, 180 ft. hd., driven by 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Feed pump
Asset ID: P-703
Available: 1
Can Pump
Teikoku feed pump 15 GPM, 180 ft. hd., driven by 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Feed pump
Centrifugal Pump
Asset ID: 380-PU-872
Available: 1
Recirculation pump. 4350 GPM @ 65TDH, Alloy D20, Durco Mark III Centrifugal pump, Size 3K10x8-16H/160RV. Designed for capacity 4950 gallons at 65 ft TDH. Skid mounted. Inlet 10 inch/outlet 8 inch. Driven by 125 HP motor 460v/1200 rpm .Part of Evaporator package PK-6045 and might not be able to be sold separately - Ask Us. For a list of all components, enter "pkevap" in the keyword search terms box.
Asset ID: 380-PU-872
Available: 1
Centrifugal Pump
Recirculation pump. 4350 GPM @ 65TDH, Alloy D20, Durco Mark III Centrifugal pump, Size 3K10x8-16H/160RV. Designed for capacity 4950 gallons at 65 ft TDH. Skid mounted. Inlet 10 inch/outlet 8 inch....
Liquid Ring Pump
Asset ID: P116
Available: 1
Busch Vacuum pump LB0063A AMB XX IX,4 GPM, Driven by 7.5 HP, 1800 RPM, 38 ACFM 5.5 FLA, 28.9 in HG. Last used as FD Dryer Vacuum Pump
Asset ID: P116
Available: 1
Liquid Ring Pump
Busch Vacuum pump LB0063A AMB XX IX,4 GPM, Driven by 7.5 HP, 1800 RPM, 38 ACFM 5.5 FLA, 28.9 in HG. Last used as FD Dryer Vacuum Pump
Can Pump
Asset ID: P-102
Available: 1
Teikoku 22 GPM, 155 Ft, 10 HP, 3600 RPM, 14.5 FLA. SN 4014004318 Last used as FD Dryer Feed pump.
Asset ID: P-102
Available: 1
Can Pump
Teikoku 22 GPM, 155 Ft, 10 HP, 3600 RPM, 14.5 FLA. SN 4014004318 Last used as FD Dryer Feed pump.
Vertical Turbine Pump
Asset ID: P-4300D
Available: 1
Vertical turbine cooling tower pump. 3 stage design. Bowls are 14" dia, 10" pipe, 114" OAL. With 150 HP US Electric Motor. 460V, 167A, 60Hz, 1785 RPM. Built 2003
Asset ID: P-4300D
Available: 1
Vertical Turbine Pump
Vertical turbine cooling tower pump. 3 stage design. Bowls are 14" dia, 10" pipe, 114" OAL. With 150 HP US Electric Motor. 460V, 167A, 60Hz, 1785 RPM. Built 2003
Can Pump
Asset ID: P-508
Available: 1
Teikoku F60-3215N4BL-0204SF1-AV, S/N 2014004320 pump, 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Post E Dryer Flash Vessel Drain pump
Asset ID: P-508
Available: 1
Can Pump
Teikoku F60-3215N4BL-0204SF1-AV, S/N 2014004320 pump, 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Post E Dryer Flash Vessel Drain pump
Can Pump
Asset ID: P-807
Available: 1
Teikoku Feed pump 150 GPM, Driven by 1HP, 460 volts, 60 Hz, 3 Phase. Last used as Feed pump
Asset ID: P-807
Available: 1
Can Pump
Teikoku Feed pump 150 GPM, Driven by 1HP, 460 volts, 60 Hz, 3 Phase. Last used as Feed pump
Plunger Pump
Asset ID: P-203
Available: 1
DXP Cat Pump 1DXM75627,10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as FD HP Feed Pump
Asset ID: P-203
Available: 1
Plunger Pump
DXP Cat Pump 1DXM75627,10 GPM, Driven by 40 HP, 460 Volts, 60 Hz, 3 phase with VFD motor. Last used as FD HP Feed Pump
Pump
Asset ID: P-706
Available: 1
Teikoku F41-215U4L-02045S1-AV, S/N FG-1379A Pump 13.2 GPM, 29.3 Ft. Hd, Driven by 2.3 HP, 3600 RPM, 3.7 FLA motor
Asset ID: P-706
Available: 1
Pump
Teikoku F41-215U4L-02045S1-AV, S/N FG-1379A Pump 13.2 GPM, 29.3 Ft. Hd, Driven by 2.3 HP, 3600 RPM, 3.7 FLA motor
Vacuum Pump
Asset ID: P-8622
Available: 1
Vacuum pump by Gardner Denver Nash, Model 44SX010V5K000, 1750 max RPM, Driven by 3 HP, 17670 RPM, 60 Hz motor. Last used as Flash Dryer Vacuum Pump
Asset ID: P-8622
Available: 1
Vacuum Pump
Vacuum pump by Gardner Denver Nash, Model 44SX010V5K000, 1750 max RPM, Driven by 3 HP, 17670 RPM, 60 Hz motor. Last used as Flash Dryer Vacuum Pump
PD Pump
Asset ID: P-214
Available: 1
Viking Positive displacement pump 10.3 GPM, 218.8 Ft, 3 HP, 28 ft Net positive suction head, suction pressure 25.4 psi. Last used as Sweet water drain pump
Asset ID: P-214
Available: 1
PD Pump
Viking Positive displacement pump 10.3 GPM, 218.8 Ft, 3 HP, 28 ft Net positive suction head, suction pressure 25.4 psi. Last used as Sweet water drain pump
High Pressure Gear Pump
Asset ID: 7628
Available: 1
Flowserve positive displacement rotary gear pump, Model 1.5GRM. Suction/Discharge 1-1/2" Shaft size 7/8". Last used for High pressure pump for votator, Flows to 1200 gpm at 500 psi. GR pumps provide high efficiency, pulse-free pumping, Ser no. 1162803CHP001A. Driven by Baldor 15 HP 230/460v 3/60 at 1160 RPM.
Asset ID: 7628
Available: 1
High Pressure Gear Pump
Flowserve positive displacement rotary gear pump, Model 1.5GRM. Suction/Discharge 1-1/2" Shaft size 7/8". Last used for High pressure pump for votator, Flows to 1200 gpm at 500 psi. GR pumps provide high efficiency, pulse-free pumping, Ser no. 1162803CHP001A....
Can Pump
Asset ID: P305
Available: 1
Flowserve Innomag Feed pump 10 HP, 460 volts, 60 Hz, 3 phase with VFD. 1.5x1x8 inches. BM69011100-BCO, Serial 69400, 6.9 inch imp. Diameter. Last used as Methanol Daty Tank Feed Pump
Asset ID: P305
Available: 1
Can Pump
Flowserve Innomag Feed pump 10 HP, 460 volts, 60 Hz, 3 phase with VFD. 1.5x1x8 inches. BM69011100-BCO, Serial 69400, 6.9 inch imp. Diameter. Last used as Methanol Daty Tank Feed Pump
Centrifugal Pump
Asset ID: 7137G
Available: 1
Centrifugal pump with Baldor Super-E Cat. No EM3771T, Spec 07H02W279, Frame 215T, 10 TE HP, sn F999, Volts 230/46, 23.8/11.9 Amps, 3525 RPM, 60 Hz, 3 phase
Asset ID: 7137G
Available: 1
Centrifugal Pump
Centrifugal pump with Baldor Super-E Cat. No EM3771T, Spec 07H02W279, Frame 215T, 10 TE HP, sn F999, Volts 230/46, 23.8/11.9 Amps, 3525 RPM, 60 Hz, 3 phase
Split Case Pump
Asset ID: 6574
Available: 1
Aurora Pump 8" split case centrifugal water pump. No. 91-10426, Type 411 SF. Size 8x8x11B. 2000 GPM. 120 Ft. head. 1750 RPM. Powered by a 75 HP General Electric motor. Model 5K365BL21502, S/N R66141250. 1780 RPM. 230/460V, 3 Ph., 60Hz, 175/88A.
Asset ID: 6574
Available: 1
Split Case Pump
Aurora Pump 8" split case centrifugal water pump. No. 91-10426, Type 411 SF. Size 8x8x11B. 2000 GPM. 120 Ft. head. 1750 RPM. Powered by a 75 HP General Electric motor. Model 5K365BL21502, S/N R66141250. 1780 RPM. 230/460V, 3 Ph., 60Hz, 175/88A.
Can Pump
Asset ID: P-107
Available: 1
Teikoku canned motor pump 7 GPM, 148 ft. hd.F41-217U4L-0204S1-AV, S/N FG-1378A, 36.4 GPM, 148 Ft,3.1 HP, 3450, RPM, 7.5 Fla
Asset ID: P-107
Available: 1
Can Pump
Teikoku canned motor pump 7 GPM, 148 ft. hd.F41-217U4L-0204S1-AV, S/N FG-1378A, 36.4 GPM, 148 Ft,3.1 HP, 3450, RPM, 7.5 Fla
Feed Pump
Asset ID: P-404
Available: 1
Teikoku F60-3115N4BL-02045G1-AV, S/N 2014004327 Pump 20 GPM, 92.4 Ft, 3.3 HP, 3600 RPM, 5.5 FLA
Asset ID: P-404
Available: 1
Feed Pump
Teikoku F60-3115N4BL-02045G1-AV, S/N 2014004327 Pump 20 GPM, 92.4 Ft, 3.3 HP, 3600 RPM, 5.5 FLA
Pump, Sanitary Centrifugal
Asset ID: 5993
Available: 1
Stainless Steel close coupled sanitary centrifugal pump. Waukesha S-line Model C218. 2 x 1 1/2 - 8. Max capacity 217 gpm @ 42 ft head. Gator Motor is 5 HP, 1765 rpm 460v 3/60. All wetted parts are stainless 316L. Open impeller design for easy cleaning, CIP capability.
Asset ID: 5993
Available: 1
Pump, Sanitary Centrifugal
Stainless Steel close coupled sanitary centrifugal pump. Waukesha S-line Model C218. 2 x 1 1/2 - 8. Max capacity 217 gpm @ 42 ft head. Gator Motor is 5 HP, 1765 rpm 460v 3/60. All wetted parts are stainless 316L. Open impeller design for easy cleaning, CIP capability.
Centrifugal Pump
Asset ID: P-1005B
Available: 1
Centrifugal Pump CPT31-6 Sulzer 10013390, 1500 GPM, 120 Ft Hd. Driven by 75 HP, 1800RPM, 460 volts, 60 Hz, motor. Last used as Dow X Water Pump
Asset ID: P-1005B
Available: 1
Centrifugal Pump
Centrifugal Pump CPT31-6 Sulzer 10013390, 1500 GPM, 120 Ft Hd. Driven by 75 HP, 1800RPM, 460 volts, 60 Hz, motor. Last used as Dow X Water Pump
Positive Displacement Pump
Asset ID: 7139I
Available: 1
Bare pump - Viking Pump Model LQ4124R, Serial No. 1702284, Size is 2.5" inlet x 2.5" outlet, cast iron body with mechanical seal. Includes integral relief valve in head, Has gear unit. Nominal flow of 135 gpm,. Approx 125 gpm. Designed to be driven by 10HP motor but motor is not included (photo shows motor but it is not there). . Used - will need reconditioning
Asset ID: 7139I
Available: 1
Positive Displacement Pump
Bare pump - Viking Pump Model LQ4124R, Serial No. 1702284, Size is 2.5" inlet x 2.5" outlet, cast iron body with mechanical seal. Includes integral relief valve in head, Has gear unit. Nominal flow of 135 gpm,. Approx 125 gpm....
Can Pump
Asset ID: P-505
Available: 1
Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004319,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as ME Dryer Drain pump
Asset ID: P-505
Available: 1
Can Pump
Teikoku Drain pump F60-3215N4BL-0204SF1-AV, S/N 2014004319,20 gpm, 160 Ft. Hd., Driven by 5.8 HP, 460 volts, 60 Hz, 3 phase with VFD motor. Last used as ME Dryer Drain pump
Pump
Asset ID: P120
Available: 1
Pump 41 GPM, 92 Ft, 4.6 HP, 3500 RPM, 7.5 Fla, Last used as Biodist. Feed Pump
Asset ID: P120
Available: 1
Pump
Pump 41 GPM, 92 Ft, 4.6 HP, 3500 RPM, 7.5 Fla, Last used as Biodist. Feed Pump
Can Pump
Asset ID: P-709
Available: 1
Teikoko Reflex pump 25 GPM, 169 ft. Hd., F60-3315N4BL-0204TF1-AV, S/N 2014004322, 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Reflex pump
Asset ID: P-709
Available: 1
Can Pump
Teikoko Reflex pump 25 GPM, 169 ft. Hd., F60-3315N4BL-0204TF1-AV, S/N 2014004322, 16.6 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as Reflex pump
Biodiesel Loadout Pump
Asset ID: BD-1507
Available: 1
Biodiesel loadout pump
Asset ID: BD-1507
Available: 1
Biodiesel Loadout Pump
Biodiesel loadout pump
Non-Seal Pump
Asset ID: 2031
Available: 1
Nikkiso non-seal pump (sealless). This pump is new unused. still in original crate. Also called canned-motor pumps. Leak free pump best suited for use with chemical industry for metering critical chemicals/fluids. Nikkiso Non-Seal Pump Model HX22C-5 Item No 3027-1200-7, Designed for 30 gpm at 129.7 Ft TDH. Output 4.96 HP 460v 3/60 3600 RPM. Ready to load
Asset ID: 2031
Available: 1
Non-Seal Pump
Nikkiso non-seal pump (sealless). This pump is new unused. still in original crate. Also called canned-motor pumps. Leak free pump best suited for use with chemical industry for metering critical chemicals/fluids....
Can Pump
Asset ID: P-509
Available: 1
Teikoku 3.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as PW Feed pump
Asset ID: P-509
Available: 1
Can Pump
Teikoku 3.3 HP, 460 volts, 60 Hz, 3 phase with VFD. Last used as PW Feed pump
Peristaltic Pump
Asset ID: AF15
Available: 1
Verderflex peristaltic pump by Verder. Model VF65 FCNBSS/S, serial 43260B6. Driven by gearmotor SEW 7.5 KW (10HP) at 1775 rpm inverter duty. Material cast iron body/cast iron rotor. Physical size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev. Flow capacity controlled by VFD and ranges from approx. 60 gpm at 75 psig to 90 gpm at 10 psig. See pump curves in Link. Maximum solids content 16.25mm compressible. Maximum lift is 9.5 mWc (meters water column)
Asset ID: AF15
Available: 1
Peristaltic Pump
Verderflex peristaltic pump by Verder. Model VF65 FCNBSS/S, serial 43260B6. Driven by gearmotor SEW 7.5 KW (10HP) at 1775 rpm inverter duty. Material cast iron body/cast iron rotor. Physical size 46.7mm x 32.3mm x 1000mm tall. Pumps at 1.5 gallons/rev....
Centrifugal Pump
Asset ID: P-112
Available: 1
Sulzer Centrifugal pump CPT-23-1B, S/N 100131147, 40 GPM, 120 Ft. Hd. Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase motor. Last used as VLF Feed pump
Asset ID: P-112
Available: 1
Centrifugal Pump
Sulzer Centrifugal pump CPT-23-1B, S/N 100131147, 40 GPM, 120 Ft. Hd. Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase motor. Last used as VLF Feed pump
Wet methanol pump
Asset ID: BD-1510
Available: 1
Flowserve Innomag Pump BM69011100-BCO, 6.9 Imp. Dia/8.25 inch S/N 68429, 1.5x1x8 inches
Asset ID: BD-1510
Available: 1
Wet methanol pump
Flowserve Innomag Pump BM69011100-BCO, 6.9 Imp. Dia/8.25 inch S/N 68429, 1.5x1x8 inches
Can Pump
Asset ID: P-705
Available: 1
Teikoko Reboiler pump F41-41TU4L-0608T1-AV, S/N FG-1382A, 22.8 HP, 460 volts, 60 Hz, 3 phase. Last used as Reboiler pump
Asset ID: P-705
Available: 1
Can Pump
Teikoko Reboiler pump F41-41TU4L-0608T1-AV, S/N FG-1382A, 22.8 HP, 460 volts, 60 Hz, 3 phase. Last used as Reboiler pump
PD Pump
Asset ID: P-922
Available: 1
Viking positive displacement pump by Central State Group, 20 GPM, 160 Ft. Hd., F60-3215N4BL-0204SF1-AV, S/N 2014004317, . 25 HP, 460 volts, 60 Hz, 3 phase. Last used as Glycerin Unloading Pump
Asset ID: P-922
Available: 1
PD Pump
Viking positive displacement pump by Central State Group, 20 GPM, 160 Ft. Hd., F60-3215N4BL-0204SF1-AV, S/N 2014004317, . 25 HP, 460 volts, 60 Hz, 3 phase. Last used as Glycerin Unloading Pump
Centrifugal Pump
Asset ID: BDPC-158
Available: 1
Dean pump 4x6x10 S/N 196598, 1320 GPM at 195 head, TECO 100 HP, 3650 RPM motor
Asset ID: BDPC-158
Available: 1
Centrifugal Pump
Dean pump 4x6x10 S/N 196598, 1320 GPM at 195 head, TECO 100 HP, 3650 RPM motor
Plunger Pump
Asset ID: P-307
Available: 1
CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 Material 316 SS. Last used as Methanol Super-1 HP Feed Pump.
Asset ID: P-307
Available: 1
Plunger Pump
CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 Material 316 SS. Last used as Methanol Super-1 HP Feed Pump.
Can Pump
Asset ID: P-808
Available: 1
Teikoku Reboiler pump FA41-316X4M-0608R1V-AV, S/N CK-2744, 10.1 HP, 460 volts, 60 Hz, 3 phase. Last used as Reboiler pump
Asset ID: P-808
Available: 1
Can Pump
Teikoku Reboiler pump FA41-316X4M-0608R1V-AV, S/N CK-2744, 10.1 HP, 460 volts, 60 Hz, 3 phase. Last used as Reboiler pump
Pump, Trash Pump
Asset ID: X4000
Available: 2
**Titan Trash Pump**
NEW
Titan 3" self priming trash pump. Model TTP-3. Designed for 200 gpm at100 ft TDH. One Serial # is 315321. Does not include motor. Quantity (2) - Priced Separately.
Asset ID: X4000
Available: 2
Pump, Trash Pump
**Titan Trash Pump** NEW Titan 3" self priming trash pump. Model TTP-3. Designed for 200 gpm at100 ft TDH. One Serial # is 315321. Does not include motor. Quantity (2) - Priced Separately.
Centrifugal Pump
Asset ID: P-1003
Available: 1
Centrifugal Pump 3x4x8 RA3146 Dean pump Division S/N 175506, 235 ft Head, 490 GPM, 3500 RPM, Impeller 7-7/8. Driven by 60 HP, 3550 RPM, 60 Hz Motor. Last used as DowX NF Pump
Asset ID: P-1003
Available: 1
Centrifugal Pump
Centrifugal Pump 3x4x8 RA3146 Dean pump Division S/N 175506, 235 ft Head, 490 GPM, 3500 RPM, Impeller 7-7/8. Driven by 60 HP, 3550 RPM, 60 Hz Motor. Last used as DowX NF Pump
Plunger Pump
Asset ID: P-303
Available: 1
CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as FFA HP Feed Pump.
Asset ID: P-303
Available: 1
Plunger Pump
CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as FFA HP Feed Pump.
PD Pump
Asset ID: P115
Available: 1
Sulzer Pump model CPT23-1B designed for Capacity 150 gpm @ 99 Head. 1770 RPM. No. 100131479. Driven by 7.5 HP motor 1800 rpm. Last used as FD Loading Pump.
Asset ID: P115
Available: 1
PD Pump
Sulzer Pump model CPT23-1B designed for Capacity 150 gpm @ 99 Head. 1770 RPM. No. 100131479. Driven by 7.5 HP motor 1800 rpm. Last used as FD Loading Pump.
Can Pump
Asset ID: P-1006
Available: 1
Teikoku Canned Motor Pump F60-3211N4BL-0408SF1-AV, S/N 2016006025, 110 GPM, 214 TDH, Driven by 16.6 HP, 460 volts, 60 Hz, 3 phase. Last used as Dow X Water Pump
Asset ID: P-1006
Available: 1
Can Pump
Teikoku Canned Motor Pump F60-3211N4BL-0408SF1-AV, S/N 2016006025, 110 GPM, 214 TDH, Driven by 16.6 HP, 460 volts, 60 Hz, 3 phase. Last used as Dow X Water Pump
Centrifugal Pump SS
Asset ID: 7137A
Available: 1
Summit centrifugal pump, stainless steel wetted parts. Model 2196. Size 3 x 4-13, impeller dia 12.25. ser 331303. Originally designed fo a 40HP Baldor electric motor @ 1760 RPM. 230/460V. We are offering ss pump, bedplate - Only. If you want motor, please add $400 and we will mount a used working TEFC 40 HP motor on pump/bedplate. Price includes loading on your truck
Asset ID: 7137A
Available: 1
Centrifugal Pump SS
Summit centrifugal pump, stainless steel wetted parts. Model 2196. Size 3 x 4-13, impeller dia 12.25. ser 331303. Originally designed fo a 40HP Baldor electric motor @ 1760 RPM. 230/460V. We are offering ss pump, bedplate - Only....
Liquid Ring Pump
Asset ID: P-507
Available: 1
Busch Vacuum Pump Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase. S/N 600015607/1Last used as ME Recovery Vacuum System
Asset ID: P-507
Available: 1
Liquid Ring Pump
Busch Vacuum Pump Driven by 7.5 HP, 460 volts, 60 Hz, 3 phase. S/N 600015607/1Last used as ME Recovery Vacuum System
Centrifugal Pump
Asset ID: P-109
Available: 1
Sulzer centrifugal pump CPT22-1 LF, SN 100131477, 31.6 GPM, 109.9 ft hd, 6.5. Driven by 5 HP, 1770 RPM, 460 Volts, 60 Hz, 3 phase. Last used as FD DE Vessel Drain pump
Asset ID: P-109
Available: 1
Centrifugal Pump
Sulzer centrifugal pump CPT22-1 LF, SN 100131477, 31.6 GPM, 109.9 ft hd, 6.5. Driven by 5 HP, 1770 RPM, 460 Volts, 60 Hz, 3 phase. Last used as FD DE Vessel Drain pump
Plunger Pump
Asset ID: P-405
Available: 1
CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as Methanol Super-2 HP Feed Pump.
Asset ID: P-405
Available: 1
Plunger Pump
CAT Plunger Pump 1DXM7562T model 3511.AMI. Designed for Capacity 14 gpm, 3000 max pressure. Motor HP 40 1700 RPM Material 316 SS. Last used as Methanol Super-2 HP Feed Pump.
Centrifugal Pump, ss
Asset ID: 5994
Available: 1
Waukesha Cherry Burrell Centrifugal Pump, stainless steel. Close coupled with motor.10 HP Baldor-Reliance- 2x2. S/N 1000002442475
Asset ID: 5994
Available: 1
Centrifugal Pump, ss
Waukesha Cherry Burrell Centrifugal Pump, stainless steel. Close coupled with motor.10 HP Baldor-Reliance- 2x2. S/N 1000002442475
Pump
Asset ID: P-512
Available: 1
Viking pump NPE Series S/N 15T1HDA2, 3.0 HP, 460 Volts, 60 Hz, 3 phase with VFD. Last used as Heavy Phase Drain Pump