Solutions 4 Manufacturing

Water Softener

Asset ID: Z-7302

Available: 1

Water softener system for boiler feedwater, mfg by Evoqua, model PTCSDT36 X 72. Resin bed for softening (3) 48" OD x 72" tall fiberglass vessels 463 gallons each rated at 150 psi at 150 F. Also (3) 39" OD x 48" tall polyethylene vessels. All piping and manifolds. Part of boiler feedwater system PK-1111

Stack ss 65 ft

Asset ID: ME-5201

Available: 1

Stainless steel stack, ss 304L. Size 56" OD x 65 ft tall insulated duct. Dryer exhaust design 175,000 acfm (bleed off to RTO 63,000 acfm) Material ss 304L. Used as exhaust/dumpstack for Dryer systemr.

Burner & Gas Train Lo-NOx 100 MMBTU

Asset ID: VK-2024

Available: 1

National Combustion Equipment (Nat-Com) Lo-NOx burner. Natural gas, sn 10815. Operating energy 83 MMBTU output. (Max is approx 100 MMBTU). Burner model P-96-G-23-1118, gas heater model GH-90-120-128-226, Includes gas train and fire management system. See links for burner drawing and gas train skid drawing. Gas train skid size 135" long x 31" deep x 86" tall (includes all valves and control panel) Used as Ring Dryer Burner.

Feed Water System for 150 HP Boiler

Asset ID: 8801

Available: 1

### DEAERATOR & FEED WATER SYSTEM ### One (1) reconditioned Atmospheric Boiler Feed Water System, complete with a 130/200 gallon carbon steel vented tank, new duplex Grundfos pumps, each sized for the full evaporation rate of a 150 HP boiler for 100% redundancy. System comes, complete with structural steel stand, steam sparge tube and temperature control to preheat and deaerate the makeup water, and water level controls. Cleaned and painted to match the boiler. Feedwater system can ship in 4 to 6 weeks ARO

Firetube Boiler Package 150 HP

Asset ID: PK-8803

Available: 1

**Reconditioned 150 HP Firetube Boiler** Superior Boiler 150 HP natural gas fired 150 psig - Boiler has been completely re-tubed. - The boiler has been cleaned on the fireside, waterside, and outside. New fireside and waterside gaskets have been installed. - The boiler pressure vessel, tubes, pressure piping, and blowdown piping and valves have been hydrostatically tested. - New relief valves will be installed or shipped loose for field installation. No steam outlet valves are included. - The existing Honeywell 7800L Flame Safeguard controls have been tested and proven good. - New High Limit with manual reset, Operating Limit, and Modulating Limit steam pressure controls have been tested and proven good. - The boiler has been wired for 460/3/60 main supply voltage. - Water level controls to turn the boiler feed water pumps “ON and OFF” to maintain water level control have been installed. **FEED WATER SYSTEM** One (1) reconditioned Atmospheric Boiler Feed Water System, complete with a 130/200 gallon carbon steel vented tank, new duplex Grundfos pumps, each sized for the full evaporation rate of a 150 HP boiler for 100% redundancy. System comes, complete with structural steel stand, steam sparge tube and temperature control to preheat and deaerate the makeup water, and water level controls. Cleaned and painted to match the boiler. Feedwater system can ship in 4 to 6 weeks ARO **BLOWDOWN SEPARATOR** One (1) reconditioned Blowdown Separator designed for the bottom blowdown rate of the 150 HP boilers, built to ASME Code Standards with a National Board stamp. It will be inspected, cleaned, and painted to match the boiler. The blowdown separator will be mounted on support legs.

Firetube Boiler 300HP

Asset ID: 7124

Available: 1

Garioni firetube boiler 300HP. Type NG5000, serial 7118. Mfg by Garioni, Brescia, Italy. Capacity 5000 kg/hr (11,000 pph steam or about 300 HP at 12 barg max (180 psig). Firetube 2-pass dry back type boiler. Built in 2002 but only used about 6 months. Electrical for controls is 110V 60 Hz. Burner fires on #2 fuel oil - pumps not included. Will need new control panel. Sold As Is - price includes loading on your truck.

Firetube Boiler 200HP

Asset ID: 8096

Available: 1

One (1) 1998 200 HP Johnston boiler, 4 pass wet back, gas and No. 2 oil fired, 250 PSI design pressure. The boiler will be cleaned on the fireside, waterside, outside, and painted. The boiler pressure vessel, tubes, piping, and blowdown valves will be hydrostatically tested. The existing Honeywell 7800L Flame Safeguard Controls will be checked and replaced if found defective. New Honeywell High Limit with manual reset, Operating Limit, and Modulating Limit Controls will be installed. The boiler will be electrically and mechanically checked throughout to identify and replace any defective components. The combustion air fan will be run to check for balance and bearing smoothness. We guarantee that the pressure vessel and tubes are in good condition and that the boiler will pass a hydrostatic test at the time of startup. We will give a 1 year parts replacement warranty on controls. These photos are representative - boiler is yet to be reconditioned - allow 6 to 8 weeks after order. This quote is for the boiler only as reconditioned. No support equipment is included. Note that this boiler is a little shorter and wider than standard Johnston dimensions so will not be a direct drop in if replacing with like kind……

Boiler Package 250 HP

Asset ID: 2091

Available: 1

### RECONDITIONED Boiler Package - Firetube 250 HP - Deaerator - Blowdown Separator ### Reconditioned boiler package with warranty. Allow 10-12 weeks ARO. Photos shown here are representative only (showing a gas fired one here) and depict what this one will look like when reconditioned. See quotation details in Links **Cleaver Brooks Boiler Firetube 250 HP** - 4 pass dry back design, - 150 PSI design pressure - No. 2 fuel oil fired with a propane pilot. - New Fireye Burner Logix or Honeywell 7800L Flame Safeguard controls will be installed. - New control and electrical panels will be installed. - The boiler will be wired for 480/3/60 VAC or for the required site voltage. - New relief valves **Deaerator and Feedwater Pumps** - Complete with a pressure vessel built to ASME Code Standards stamped with a National Board Number, - Two new Grundfos pumps each sized to serve the full evaporation rate of a 250 HP boiler, - Control panel with pump selector switch, - Steam inlet piping, steam pressure reducing valve, makeup water control valve, relief valves, and pump inlet piping. - Blowdown Separator

Firetube Boiler 250HP

Asset ID: 2456

Available: 1

### Superior 250HP Firetube Boiler ### Superior Seminole 3-pass wetback firetube boiler. ASME Nat'l board # 15325. Natural gas fired, steam generator. Working pressure 150 psig, design pressure 180psi. Safety valve set pressure at 150psi, with a minimum valve capacity of 10,136 lbs. / hr. Heating surface is 1,287 sq ft. Includes a Cleaver Brooks Spraymaster Deaerator and feedwater pumps on skid. Boiler idled in late 2023 - last inspected on 10/31/2023. See drawings and brochure in links. Boiler similar.

Firetube Boiler 150 HP

Asset ID: 7209

Available: 1

### Cleaver Brooks Packaged Firetube Boiler 150 HP ### Cleaver Brooks Firetube boiler, model CB 700-150. Natural gas fired- maximum pressure of 150 psi. Input of 6,277,000 BTU / HR. 5HP blower motor 460v 3/60 and Control circuit is 120v 1/60. Boiler is in good condition and was taken out of service in September 2024. Internal inspection was completed in May 2024 and it has been hydro tested with no tube leaks. Prices includes loading onto your truck.

Firetube Boiler 2200 HP Lo Nox

Asset ID: Z-7201B

Available: 1

Firetube Boiler, Superior Boiler and Economizer 2200HP (73,645 MBTU) steam OUT, Lo NOx natural gas fired 150 psig. Superior Apache 2-Pass Dryback Scotch Marine Package Boiler Model 8-X-11000-S150-GPCF-G. Natural gas firing rate IN 92,400 cfh of 1000 BTU/cf. ASME Nat'l Bd# 16199. Cleaver Brooks burner model LNXLG-924. Lo NOx < 30 ppm and 0.0364 lbs. per MMBTU. Includes controls and firing monitoring, gas train, forced draft blower, Kunkle safety valves 6x8" and 4x6" both set at 100 psig. Boiler dimensions are approx 151" w x 302" L x 153" tall. Approx floor space needed: 43.6 ft L x 19.3 ft W x 13.2 ft T (not including safety valves and economizer and stack). Cain economizer model RJR-166K26ALS. Stainless steel. Stack is Van-Packer Model DW 36" ID x 20'-9" long, ss304 insulated. See drawing and manual for verification. Weight empty approx 121,000 pounds. Idled 2018. This boiler has been mothballed properly, and is in supervised dry storage with "VpCI" (vapor phase corrosion inhibitor). It was just checked again by the third party in early 2020 and late 2021.Still installed.

Firetube Boiler 150HP

Asset ID: 8800

Available: 1

**Reconditioned 150 HP Firetube Boiler** Superior Boiler 150 HP natural gas fired 150 psig - Boiler has been completely re-tubed. - The boiler has been cleaned on the fireside, waterside, and outside. New fireside and waterside gaskets have been installed. - The boiler pressure vessel, tubes, pressure piping, and blowdown piping and valves have been hydrostatically tested. - New relief valves will be installed or shipped loose for field installation. No steam outlet valves are included. - The existing Honeywell 7800L Flame Safeguard controls have been tested and proven good. - New High Limit with manual reset, Operating Limit, and Modulating Limit steam pressure controls have been tested and proven good. - The boiler has been wired for 460/3/60 main supply voltage. - Water level controls to turn the boiler feed water pumps “ON and OFF” to maintain water level control have been installed. **WARRANTY** Offered through our boiler reconditioner: The boiler has been electrically and mechanically checked throughout. Any components found to be defective or obsolete have been replaced. We guarantee that the pressure vessel is in good condition and the tubes are new, and that the boiler will pass a hydrostatic test at the time of startup. We will give a 1 year parts replacement warranty on the controls. No labor to change the part is included. **OPTIONS** Deaerator and feedwater system sized for a 150 HP boiler available - See Asset 8801 Blowdown Separator vessel deigned for the bottom blowdown rate of a 150 HP boiler is available - see asset 8802

Watertube Boiler 90,000 lbs/hr

Asset ID: 2116

Available: 1

### Watertube Boiler with Economizer 90,000 #/hr Natural Gas ### Victory Natural Gas Watertube Boiler Type O, Voyager Series VS-5-78SP SH. Capacity 90,000 lbs./hr saturated steam at 800 psig (design pressure 950 psig) ASME Nat'l Bd # 589. - Economizer - Feedwater System - Stack 50 feet - Electrical and PLC control systems. With feedwater temperature 227 Fahrenheit to economizer inlet. Complete economizer system. Furnace Radiant Heating Surface 889 Sq. Ft, Boiler Convective Heating Surface 6,455 Sq. Ft., Total Heating Surface 7,344 Sq. Ft. Superheater surface is 980 sq. ft. Drums Submerged arc automatic welded and stress relieved with radiographed welded seams and tubes are rolled and expanded into the drum. Drum material is SA-516 Gr. 70. Mud Drum is provided with a 12” x 16” hinged manway access in each drum head. Steam Drum is provided with a 12” x 16” hinged manway access in each drum head. All tubes enter the drum radially with full parallel bearing through the drum plate and all tubes are full diameter with no swaging. All tubes are full diameter tubes with no swaging.

Watertube Boiler 250,000 #/hr

Asset ID: 2349

Available: 1

### Cleaver Brooks Industrial Watertube Boiler 250,000 lbs/hr superheated steam ### - Boiler model NB-801D-125-550-AL-LH, serial CP-4582 - NEW, never installed - D-type watertube style - Pressure 420 psig operating pressure (superheated, temp 650F +/- 25). Superheated steam - Natcom LoNOX Burner, natural gas. Gas train included. Burner model NCB-330-68A-000-S10-000 - Stack included - 3 sections - Economizer, ECO, Inc. vertical 7.5 ft dia x 20 ft tall - Controls - 2 plc's + burner management + combustion controls - Includes SCR for emissions reduction - Under nitrogen purge with desiccant in furnace area Removed and stored - ready to load. See additional information in document links

Hot Water Boiler 5 MMBTU

Asset ID: M33

Available: 1

Hot water boiler Sellers 5 MMBTU (150HP). Model S-150-W Model 15 Senior. Fired by natural gas - automatic. LoNox burner 30 ppm, turn down ratio 3:1. Input 6.27 MMBTU, Output 5,021,000 BTU/hr, 150 psi max pressure . Water capacity 411 gallons. S/N 103390, ASME Nat'l Bd# 10610. Includes Recirculation motor 7.5 HP. Includes 3 expansion tanks. Physical dimensions L x W x H 166" x 53" x 73".

Waste to Energy Gasifier Steam Generator

Asset ID: 1964

Available: 1

### Waste to Energy Gasifier & Steam Generator ### Steam Generator 50,000 lbs/hr at 150 psig. System disposes of wood flour and carpet waste (the fuel) by a staged combustion process in a Gasifier resulting in hot clean waste gases through a Rentech HRSG (heat recovery steam generator) to generate steam. Natural gas is used at startup to obtain combustion of the fuel, then shut off during the process. Feed is 3 tons/hr of blended waste (or 5 tons per hour of wood flour) generating 50,000 lbs/hr steam at 150 psig, and approx. 745 lbs per hour of ash. Includes ash recovery and silo, gasifier, combustion tube column, HRSG (heat recovery steam generator), baghouse dust collector for fly ash and stack. Siemens was the systems integrator and engineered the plant; PRIMENERGY (PRME) was the general contractor and manufacturer of the KC-17 Gasifier. See all links including PFD for all components. See documents for equipment list

HRSG Rentech

Asset ID: 2146

Available: 1

**Rentech Heat Recovery Steam Generator (HRSG) Low Hours** ASME MAWP: 200 psig at 500 F, Tubes 700 F Maximum Steaming Capacity: 31,500 lb/hr, Heating Surface: 24,471 sq. ft. Mfg. Serial No. 2015-43 Very Good Conditon. Only ran for 12-18 Months before being idled. Bought new in 2016. Ran for 12 Months then shut down when owner couldn't pay loan. New company purchased and ran in 2018 for 6 months.

Gas Fired Steam Generator (HRSG)

Asset ID: 7644

Available: 1

**Rentech Duct Fired HRSG System (Heat Recovery Steam Generator)** This is a ***brand new*** HRSG - never used. Model Waterfall Type "O" - Rated at 200,000 pph at 400 psig saturated steam with economizer (can also run at 200 psig) - Designed for feedwater flow 400 gpm at 439 psig and 228F **INCUDES** (also see pdf list in link) - Natural gas duct burner system and fuel skid with gas train and flame supervision, rated at 136 MMBTU/h - Steam Generator System (HRSG) Evaporator. "O" type tube arrangement with steam drum and mud drum, 2" tubes - Bypass stack 50 ft x 76" diameter - Exhaust stack 50 ft x 76" diameter - Economizer - finned tube single pass - Boiler Control System: BMS - plc controlled burner management system, CCS - combustion control system, HMI touch screen, Allen Bradley plc and HMI - Interconnecting duct work - Ladders & Gratings Rentech had pre-fit all structural steel in the shop. Once they were assembled, photos were taken, and pieces were disassembled for shipment. Rentech will provide 3-D modeling of the complete boiler system including auxiliaries to assist in the system layout and to avoid costly interference and fit-up issues in the field. **System has been completed and is now stored in protected warehouse.(never has been used)**

Boiler Electric Steam 80 KW

Asset ID: 2358

Available: 1

### Electric Steam Boiler - Low Pressure ### Precision Boiler Model ST20S -080D-480-15 Boiler, serial 23158. - Rated at 80 KW input at "full fire". Input 480v 3/60. Rating 273,000 BTU/hr (8.16 boiler HP), - Max Working Pressure 15 psi (250F). - Comes with Condensate and Chemical Skid, All completely piped - see drawing - Low Hours - only ran a year. Built Apr 2022, Commissioned July 2022, Decommissioned July 2023

Biomass Boiler 1500HP + 1MW GenSet

Asset ID: 7258

Available: 1

### BIOMASS BOILER. 1500 BHP 450 psig ### - Hurst Biomass Boiler, 450 psig saturated. Model # HYB 9570-450-1, Capacity 1500HP (51,750 #/hr steam). Heating surface 9750 sq ft. - This is a HYBRID biomass boiler (part firetube & part watertube) designed so well by Hurst Boiler with reciprocating grate - Steam turbine GenSet 1MW - inlet superheated steam 450 psig - System only used for about 6 years, then idled. Built 2009 - Fuel was shredded carpet. - Natural gas burner used for startup combustion only, then shut off for operation Complete Steam Plant with a non-condensing type Steam Turbine Generator 1.0 MW (rated at 750 KW) , with Deaerator tank, high pressure boiler feed water pumps, wet ash removal system, controls, fuel feeding conveyors, all fans and standard boiler trim. Also includes an Air Technologies CEMS (continuous emissions monitoring system) and a Fabricated Steel Silo with auger discharge for fuel storage and conveyance. Manufacturer Lists the following Features: "Hybrid" Firetube/Watertube Vessel Design; Watertube Section; Firetube Section with Blast Tubes; Reciprocating Fire Grates; Under Fire Air Fan; Reciprocating Drive; Over Fire Fan/Dampers; Carry-Over Reinjection Blower; 1500HP Fire Door; Ash Clean Out Door; Fuel Metering Bin; Ash Removal Conveyor; Refractory Arch. Includes operating manuals and some drawings. See FLYER in link for more details and a component list. Last used for burning used shredded carpet. The blast tubes prevent fouling from ash on the first pass through fire tubes. We have shipping specs, weights, dimensions on file.

High Pressure Boiler

Asset ID: 2096

Available: 1

## High Pressure Steam Generator - to 1,380 psig NEW ## High Pressure Steam Boiler. New- never used.7200 MBTU/hr. Built in 2015, engineered by GTS Energy. Serial # G-8410. ASME Nat'l Bd # 368 , MAWP 1380 psig at 600F, normal operating pressure is 1250 psig. Honeywell flame management control. Dual fuel Lo NOx burner fired with natural gas or oil. Industrial Combustion LNVLG-100 Lo NOx <30 ppm. Operating steam flow 12,124 lbs.hr at 1160 psig closed loop, 6 inch connections. NUK generator- top down firing. All automatic, closed loop system- requires no operator. ***Explanation of Operation*** - The NUK® High-Pressure Steam Generator was specifically developed for oil deodorization applications typically used in the food industry. The NUK is used as a heat source during the deodorization process to safely remove undesirable flavors and odors from edible oils; leaving the oil free from toxins. The NUK High-Pressure Steam Generator is a hermetically closed-looped heating system utilizing a water-steam mixture with maximum design pressures of 1950 psi. The system consists primarily of a vertical cylindrical combustion chamber, coil, burner, steam supply, and condensate return manifolds See links for General Arrangement and P&ID's.

Include all

Include all

Include all

Include all

Include all

Include all

Include all

All Assets from Category 'Boiler'

21 Results

Sort:

Relevance

Refine Assets By

Include all

Include all

Include all

Include all

Include all

Include all

Include all

Asset ID: Z-7302

Available: 1

Water Softener

Asset ID: ME-5201

Available: 1

Stack ss 65 ft

Asset ID: VK-2024

Available: 1

Burner & Gas Train Lo-NOx 100 MMBTU

Asset ID: 8801

Available: 1

Feed Water System for 150 HP Boiler

Asset ID: PK-8803

Available: 1

Firetube Boiler Package 150 HP

Asset ID: 7124

Available: 1

Firetube Boiler 300HP

Asset ID: 8096

Available: 1

Firetube Boiler 200HP

Asset ID: 2091

Available: 1

Boiler Package 250 HP

Asset ID: 2456

Available: 1

Firetube Boiler 250HP

Asset ID: 7209

Available: 1

Firetube Boiler 150 HP

Asset ID: Z-7201B

Available: 1

Firetube Boiler 2200 HP Lo Nox

Asset ID: 8800

Available: 1

Firetube Boiler 150HP

Asset ID: 2116

Available: 1

Watertube Boiler 90,000 lbs/hr

Asset ID: 2349

Available: 1

Watertube Boiler 250,000 #/hr

Asset ID: M33

Available: 1

Hot Water Boiler 5 MMBTU

Asset ID: 1964

Available: 1

Waste to Energy Gasifier Steam Generator

Asset ID: 2146

Available: 1

HRSG Rentech

Asset ID: 7644

Available: 1

Gas Fired Steam Generator (HRSG)

Asset ID: 2358

Available: 1

Boiler Electric Steam 80 KW

Asset ID: 7258

Available: 1

Biomass Boiler 1500HP + 1MW GenSet

Asset ID: 2096

Reconditioned 150 HP Firetube Boiler Superior Boiler 150 HP natural gas fired 150 psig - Boiler has been completely re-tubed. - The boiler has been cleaned on the fireside, waterside, and outside. New fireside and waterside gaskets have been installed....