Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Include all
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Packaging'
31 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Include all
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
Shrink Tunnel
Asset ID: E2355X
Available: 1
Weldotron heat tunnel - Model 7121 S/N FW93271, 220 V, 35 amps, 1 Phase; Motor: 115V, 1 phase, 0.75 amp, 1/15 HP. Dimensions: 74"L x 34"W x 61"H. Tunnel passage width: 16" and height: 8". Versatile shrink tunnel designed to produce complete, uniform shrink on a wide range of product sizes and shapes.
Asset ID: E2355X
Available: 1
Shrink Tunnel
Weldotron heat tunnel - Model 7121 S/N FW93271, 220 V, 35 amps, 1 Phase; Motor: 115V, 1 phase, 0.75 amp, 1/15 HP. Dimensions: 74"L x 34"W x 61"H. Tunnel passage width: 16" and height: 8"....
Reject Station
Asset ID: E2360
Available: 1
Reject Station: Includes Proximity Switch, Air Knife, control box, and tripod stand on wheels - triggers a switch when metal is in close proximity. Last used to detect if CD's were in cases. If a CD was in the case, it would be blown off the line. Includes stand.
Asset ID: E2360
Available: 1
Reject Station
Reject Station: Includes Proximity Switch, Air Knife, control box, and tripod stand on wheels - triggers a switch when metal is in close proximity. Last used to detect if CD's were in cases. If a CD was in the case, it would be blown off the line. Includes stand.
CD Case Feeder
Asset ID: E2363
Available: 1
CD Case Feeder; pneumatic on turn table; Manufactured by EAM
Asset ID: E2363
Available: 1
CD Case Feeder
CD Case Feeder; pneumatic on turn table; Manufactured by EAM
Reject Station Proximity Switch
Asset ID: E2361
Available: 5
Reject Station: Includes Proximity Switch, Air Knife, control box, and tripod stand on wheels - triggers a switch when metal is in close proximity. Proximity switch is Turck BC20-Q20-AN4X2. Last used to detect if CD's were in cases. If a CD was not in the case, it would be blown off the line. Includes stand. Qty (5) of these available, priced separately
Asset ID: E2361
Available: 5
Reject Station Proximity Switch
Reject Station: Includes Proximity Switch, Air Knife, control box, and tripod stand on wheels - triggers a switch when metal is in close proximity. Proximity switch is Turck BC20-Q20-AN4X2. Last used to detect if CD's were in cases. If a CD was not in the case, it would be blown off the line....
Dyna Pack (Hot Glue)
Asset ID: 6150
Available: 1
ITW Dynatec, Dyna Pack (Hot Glue), 4-line capability currently equipped w/ two (2) programmable heads (6 ft hose, Part # N2306, Serial No. 93468, 230 Volt), TPC-9 controller, Model No. 114231, S.N. 281382, 120-volt 6 Watt (adjustable delay, length of bead, skip, repeat). Was bought new in 2013
Asset ID: 6150
Available: 1
Dyna Pack (Hot Glue)
ITW Dynatec, Dyna Pack (Hot Glue), 4-line capability currently equipped w/ two (2) programmable heads (6 ft hose, Part # N2306, Serial No. 93468, 230 Volt), TPC-9 controller, Model No. 114231, S.N. 281382, 120-volt 6 Watt (adjustable delay, length of bead, skip, repeat). Was bought new in 2013
Chain Wheel Sprocket, Labeler
Asset ID: O50
Available: 1
Chain Wheel / Sprocket 0002091838 1-703-29-038-0 for Krones labeler
Asset ID: O50
Available: 1
Chain Wheel Sprocket, Labeler
Chain Wheel / Sprocket 0002091838 1-703-29-038-0 for Krones labeler
Bag In Box Packaging Line BIB
Asset ID: PK-3400
Available: 1
## Bag In Box (BIB) Line ##
Packaging line for filling 35 pound fluid. This line consists of the case erector, filler, and case sealer plus the interconnecting roller/belt conveyors. Installed footprint 88 ft x 13 ft but can be configured differently.
- **Case Erector** - Moen PF106-TPB two piece Bliss case former. For more details - see asset R3401
- **Filler** - Rapak bag in box filler.with bag former/inserter. Single nozzle automatic bag filler. Includes Delrin conveyor through filler in a U shape pattern. For more details see R3402
- **Case Sealer** - Pearson N401-G case sealer. For more details see asset R3403
- Belt conveyor on rollers - interconnecting conveyors - see drawing.- Stainless steel surge tank approx 25 gallons with centrifugal filler pump.
**For more details on all components of this line, enter R3400 in the search box**
Asset ID: PK-3400
Available: 1
Bag In Box Packaging Line BIB
## Bag In Box (BIB) Line ## Packaging line for filling 35 pound fluid. This line consists of the case erector, filler, and case sealer plus the interconnecting roller/belt conveyors. Installed footprint 88 ft x 13 ft but can be configured differently....
JIB Line Jug-In-Box
Asset ID: PK-3500
Available: 1
## JIB Line, Complete. Fills 17.5 lb or 35 lb Jug-In-Box ##
This is a complete line, currently installed. Line speed 18 cpm on 35# jugs and 11 cpm on 17.5 lb jugs. Installed in 1992, Idled in early 2025 - ready for removal and loading. Ready for immediate shipment
- Thiele 5 nozzle filler with , all controls. Positive displacement piston control. Nozzle opening 2 inch
- Stainless steel surge tank, pump
- Fowler Zalkin FTM200 Capper and cap feeder. Single head automatic for 63mm caps. Includes infeed and outfeed conveyors
- All interconnecting conveyors, photo-eyes, controls. Very long in-feed and out-feed conveyors - live rollers
**For many more details and photos on all components of the Jug In Box line (JIB Line), enter R3500 in search box**
Asset ID: PK-3500
Available: 1
JIB Line Jug-In-Box
## JIB Line, Complete. Fills 17.5 lb or 35 lb Jug-In-Box ## This is a complete line, currently installed. Line speed 18 cpm on 35# jugs and 11 cpm on 17.5 lb jugs. Installed in 1992, Idled in early 2025 - ready for removal and loading....
Tincture Bottle Filling Line
Asset ID: 8330
Available: 1
### Tincture Filling Line ###
Complete tincture filling line for bottles of liquid. For 15ml and 30ml sizes (running 0.5 oz and 1 oz Boston Round Bottles).
- Includes feed & offtake tables, dual station filler with capper Model FC-4100, labeler Model LR3000. HMI touchscreen controls.
- Speeds from 20 bpm to 30 bpm
- Can run other sizes if they fit under filling nozzle
- Four filler wheels (large white stars shown in photos) included for various bottles - Other change parts can be ordered from US supplier if your bottle is different
Made in China but sourced from DupreSolutions in Vermont who also serviced the line. Please see the manual in Document Link.
Used very little - in excellent shape
Asset ID: 8330
Available: 1
Tincture Bottle Filling Line
### Tincture Filling Line ### Complete tincture filling line for bottles of liquid. For 15ml and 30ml sizes (running 0.5 oz and 1 oz Boston Round Bottles). - Includes feed & offtake tables, dual station filler with capper Model FC-4100, labeler Model LR3000. HMI touchscreen controls....
50 lb Cube Filling Line - stainless
Asset ID: 5976
Available: 1
Filling line for 50lb cube boxes - stainless steel filler last used for margarine filling. Can be adjusted for other size boxes down to 25 lb. This is an automatic line. Control by Allen Bradley Control Logix plc (filler will have to be re-programmed. Can also be used for shortening filling. Rate was between 5 to 8 cases per minute depending on viscosity (if filling 50# boxes, rate would be 24,000 #/hr). Includes Pearson case erector for LH KD cases, Pearson bag inserter using roll bags, stainless 2-spout filler on Mettler Toledo load cells, and SV Dice uncuffer case sealer (missing plc and hot melt unit). Includes interconnecting conveyors. Line built 2001 - ran until early 2017. Stored in warehouse, ready to load. See marketing flyer. We have a dimension drawing for all major pieces. (5976Layout.pdf). For a list of all components for this line - enter "5976cube" in search box.
Asset ID: 5976
Available: 1
50 lb Cube Filling Line - stainless
Filling line for 50lb cube boxes - stainless steel filler last used for margarine filling. Can be adjusted for other size boxes down to 25 lb. This is an automatic line. Control by Allen Bradley Control Logix plc (filler will have to be re-programmed. Can also be used for shortening filling....
Filler, Viscous Fluid
Asset ID: 5942
Available: 1
Filler for 50# cubes - 2 heads. Stainless steel, automatic valves, extrusion valve for shortening or margarine. Two load cells Mettler Toledo, Model IND131, Max load 50kg. Controlled by Allen Bradley touch screen Panelview 1500. Has Allen Bradley Compact Logix plc. Will require re-programming of the logic. Includes Little David Microjet coder and Diagraph IV700 case coder. Capacity 5 to 8 cases per minute depending on viscosity. This is a weigh filler controlled by Mettler load cells. Last used to fill boxes of margarine (12" x 12" x 12") but can handle any viscous fluid. Part of a complete 50# cube filling line. Built 2001. Idled early 2017. Removed, stored, ready to ship. For a list of all components for this line - enter " 5976cube " in search box.
Asset ID: 5942
Available: 1
Filler, Viscous Fluid
Filler for 50# cubes - 2 heads. Stainless steel, automatic valves, extrusion valve for shortening or margarine. Two load cells Mettler Toledo, Model IND131, Max load 50kg. Controlled by Allen Bradley touch screen Panelview 1500. Has Allen Bradley Compact Logix plc....
Filler - 4 Head Stainless
Asset ID: 7621
Available: 1
### Bulk viscous material filler - 4 head ###
Rated at 8 to 10 cases per minute depending on viscosity. For viscous material including shortening and margarine. Stainless steel filler with controls, load cells, and 4 conveyors. Infeed pipe to ss fill nozzles is 2: carbon steel. Uses 4 Mettler Toledo load cells - controls included. Has 2 automatic ss ball valves an 4 air operated ss modulating valves at nozzles. Includes 4 conveyor sections on load cells - Mettler controls in panel over Rice Lake model BM1818S-200, capacity 200 lbs each load cells). Can also fill, 25# cube boxes, 50 # cube boxes, 5 gallon (35 lb) pails, 25 kg boxes. Could be adapted for gallon and 1/2 gallon containers and smaller. Stainless so can be used with margarine, butter, or any other viscous product. Filler control panel measures 3 ft x 7 ft x 1 ft deep. Will have to be reprogrammed. In warehouse - ready to load
Asset ID: 7621
Available: 1
Filler - 4 Head Stainless
### Bulk viscous material filler - 4 head ### Rated at 8 to 10 cases per minute depending on viscosity. For viscous material including shortening and margarine. Stainless steel filler with controls, load cells, and 4 conveyors. Infeed pipe to ss fill nozzles is 2: carbon steel....
Pail Filler, Liquid - Stainless
Asset ID: 7622
Available: 1
Neupak Weigh Master Pail Filler, 2 nozzle Neupak with load cell control for viscous liquids (no load cells included). Stainless steel piping and nozzles. Was last used for filling 5 gallon shortening pails but can handle other size pails or boxes. Controls included in separate control cabinet with Allen Bradley plc SLC 504 CPU. serial # M65301. Unit is in 2 pieces. Shipping sizes: filler 32 x 48 x 80 inches tall, control cabinet 40 x 48 x 96 inches tall.
Asset ID: 7622
Available: 1
Pail Filler, Liquid - Stainless
Neupak Weigh Master Pail Filler, 2 nozzle Neupak with load cell control for viscous liquids (no load cells included). Stainless steel piping and nozzles. Was last used for filling 5 gallon shortening pails but can handle other size pails or boxes....
Liquid Filler
Asset ID: R3501
Available: 1
## Thiele 5-Nozzle Jug Filler with ss Surge Tanks and Pump ##
**Food Grade** Thiele positive displacement filler with centrifugal pump feed system - all controls
- Stainless steel surge tank approx 75 gallons with centrifugal feed pump, filters and manifold
- Positive displacement individual piston control filling to five nozzles - nozzle bore approximately 2"
- Includes all controls and photo-eyes
- Delrin flex transport belt through filler
- Live roller feed to filler - approx 16" wide x 20 ft long
- Stainless steel sanitary dust covers
Still in operation running 2.5 gallons and 5 gallon jugs of liquid vegetable oil filling Jug in Box.
**For more details on all components of the Jug In Box line (JIB Line), enter R3500 in search box**
Asset ID: R3501
Available: 1
Liquid Filler
## Thiele 5-Nozzle Jug Filler with ss Surge Tanks and Pump ## **Food Grade** Thiele positive displacement filler with centrifugal pump feed system - all controls - Stainless steel surge tank approx 75 gallons with centrifugal feed pump, filters and manifold - Positive displacement individual ....
Filler, Liquid Bag-In-Box
Asset ID: R3402
Available: 1
Rapak bag-in-box liquid filler with bag feeder. Designed for 10 cs per min. Single nozzle, bag former. Stainless steel. Idled in early 2025 - still installed
Autokap™ 1200 Single-Head Fully-Automatic Filling Machine. This high-speed filler is designed to fill 1.5 - 20 L (0.5 - 5 gal.) bags.
- Touch screen controls
- Stainless steel supply tank, approx 25 gallons
- Centrifugal feed pump
- Delrin conveyor
Production output capability
5L (0.5 gal.) bags at up to 17 bags/min
3L (1 gal.) bags at up to 16 bags/min
5L (1.5 gal.) bags at up to 14 bags/min
10L (2.5 gal.) bags at up 11 bags/min
20L (5 gal.) bags at up to 9 bags/min
**For more details on all components of this line, enter R3400 in the search box**
Asset ID: R3402
Available: 1
Filler, Liquid Bag-In-Box
Rapak bag-in-box liquid filler with bag feeder. Designed for 10 cs per min. Single nozzle, bag former. Stainless steel. Idled in early 2025 - still installed Autokap™ 1200 Single-Head Fully-Automatic Filling Machine. This high-speed filler is designed to fill 1.5 - 20 L (0.5 - 5 gal.) bags....
Case Sealer
Asset ID: R3403
Available: 1
Pearson case sealer - hot melt top sealer. Model CS25-T, serial number 2006CS2511021. Equipped with top flap closers and plows, Allen Bradley touch screen controls, Nordson Problue 7 hot melt unit and guns.
Pearson’s CS25 Case Sealers top seal a wide range of case sizes with either pressure-sensitive tape or hot melt adhesive at speeds of 25 to 42 cases per minute depending on case length. All of Pearson Packaging’s case sealers are designed to accommodate a wide range of box styles and sizes for production rates spanning from low to high-speed. Case size range: 8" to 24" in Length; 5" to 16" in Width, 4¾" to 18½" in Depth. Ready to ship
**For more details on all components of this line, enter R3400 in the search box**
Asset ID: R3403
Available: 1
Case Sealer
Pearson case sealer - hot melt top sealer. Model CS25-T, serial number 2006CS2511021. Equipped with top flap closers and plows, Allen Bradley touch screen controls, Nordson Problue 7 hot melt unit and guns....
Case Sealer/Taper
Asset ID: 6155
Available: 1
Case Sealer/Carton Taper, The Loveshaw Corporation, Model 304/19, S.N. 159183300, 110 Volt, 9.6 Amp. Top & Bottom Sealing Heads, 2 in. x 6 ft. Side Pull Belts, Product Loading “anvil”, unit currently has Lincoln Coder, Model 90-2L-I
Asset ID: 6155
Available: 1
Case Sealer/Taper
Case Sealer/Carton Taper, The Loveshaw Corporation, Model 304/19, S.N. 159183300, 110 Volt, 9.6 Amp. Top & Bottom Sealing Heads, 2 in. x 6 ft. Side Pull Belts, Product Loading “anvil”, unit currently has Lincoln Coder, Model 90-2L-I
Case Sealer Uncuffer
Asset ID: 5980
Available: 1
Case bag uncuffer and sealer. Model PDUC-UFC, sn 4374. Uncuffs poly bag from 50# cube box, folds bag in, tamps it down, and seals top with hot melt glue. Missing hot melt unit and plc from control panel - manufacturer still supports this machine. Part of a complete 50# cube filling line. For a list of all components for this line - enter "5976cube" in search box.
Asset ID: 5980
Available: 1
Case Sealer Uncuffer
Case bag uncuffer and sealer. Model PDUC-UFC, sn 4374. Uncuffs poly bag from 50# cube box, folds bag in, tamps it down, and seals top with hot melt glue. Missing hot melt unit and plc from control panel - manufacturer still supports this machine. Part of a complete 50# cube filling line....
Case Erector
Asset ID: 5977
Available: 1
## Pearson Case Erector ##
Automatic case erector for knock-down (KD) cases with magazine and hot melt bottom glue system. Set up for Left Hand (LH cases) - we have drawing
- Model CE-235 serial 200102359572, machine number 9572
- Rated speeds up to 35 cases / minute.
- Feed from right to left when standing in front of machine name and electrical panel
- Includes Probilt hot melt glue system, part No. D100-644, serial No. 3551211272
- Was erecting KD cases for 50# cubes 12" x 12" x 12" but can be adjusted.
- Case size range: Can adjust to handle cases from 5 to 30" long, 5.5 to 16" wide and 3.5 to 24" tall
- Driven by 1.5 HP motor 460/3/60
- In warehouse - ready to load
Part of a complete 50# cube filling line (Asset 5976) but will be sold separately. Entire line idled in 2017. Removed, stored, ready to ship.
For a list of all components for this line - enter "5976cube" in search box. …..
Asset ID: 5977
Available: 1
Case Erector
## Pearson Case Erector ## Automatic case erector for knock-down (KD) cases with magazine and hot melt bottom glue system. Set up for Left Hand (LH cases) - we have drawing - Model CE-235 serial 200102359572, machine number 9572 - Rated speeds up to 35 cases / minute....
Case Erector
Asset ID: R3401
Available: 1
**Moen Bliss Type Case Erector**
Designed for 2 part case for bag in box. Model PF106-TPB, serial 1867. Idle in early 2025 - still installed.
The Model PF106-TPB two-piece bliss former glues a bliss liners to a bliss body wrap, resulting in a shipping case with a double laminated bottom and an integral structure for top-to-bottom strength and box rigidity For bag-in-box applications, the two-piece bliss box can be formed with an FOL style top closure and then palletized on the side of the box, allowing the user to utilize the double laminated bottom and the double laminated top closure as vertical stacking members. The PF106-TPB can be changed over to accommodate a range of box sizes with a change over time of 30 min.
**For more details on all components of this line, enter R3400 in the search box**
Asset ID: R3401
Available: 1
Case Erector
**Moen Bliss Type Case Erector** Designed for 2 part case for bag in box. Model PF106-TPB, serial 1867. Idle in early 2025 - still installed....
Bag Inserter
Asset ID: R3550
Available: 1
## Bemis Automatic Poly Bag Inserter ##
Separates a poly bag from a roll of perforated and sealed poly bags, then opens the bag and inserts the bag into a formed and bottom sealed case, and cuffs the top of the bag over the vertical top flaps of the case. Includes belt case conveyor
Bemis Model 1575H, automatic bag inserter capable of speeds from 5 to12 cpm – speeds depending on material and application. Case size range: 8" to 20" in Length x 4" to 16" in Width x 10" to 22" in depth with bag gauge of 1-1/2 to 3 mil low density, 10-3/4" max roll diameter, 27-1/2" max roll width. Length of bag cuff overlay-depth and width is 5" to 7". Unit equipped with an Allen Bradley plc controller. Automatically selects a gusseted or flat tube polyethylene bag from a roll of perforated stock and inserts the bag into an erected corrugated container. Roll stock support accommodates two rolls of poly bags and quick roll change.
Was in operating condition when idled and removed early 2025.
Asset ID: R3550
Available: 1
Bag Inserter
## Bemis Automatic Poly Bag Inserter ## Separates a poly bag from a roll of perforated and sealed poly bags, then opens the bag and inserts the bag into a formed and bottom sealed case, and cuffs the top of the bag over the vertical top flaps of the case....
Bag Inserter
Asset ID: 5978
Available: 1
Pearson bag inserter - uses poly roll bags. Built 2001. Set up for 50# cube 12" x 12" x 12" box but can be adjusted. Built 2001. Believed to be Model BI-18. Size range L 9.5-24", W 9.5-17", H 10-24". Serial number 200119289647, 3HP 460/3/60. Built 2001. Idled early 2017. Pearson BI18 Bag Inserters open, insert, and cuff plastic bags from roll stock into a wide variety of corrugated cases at speeds up to 18 cases per minute. Equipped with bag opening carriage with vacuum cup assist, four corner cuffing rods and single head bag inserting head, PLC controller, vacuum pump, safety guarding and e-stop. Inserts pre-performed roll stock or gusseted bag stock into cases, filling all corners and cuffing the bag around the outer perimeter. Has a 36" web width with a 1-1/2" diameter spool. Has an Allen Bradley SLC 5/01 PLC. Advanced design features guarantee smooth and precise bag placement and handling. Removed, stored, ready to ship. Part of a complete 50# cube filling line. For a list of all components for this line - enter "5976cube" in search box.
Asset ID: 5978
Available: 1
Bag Inserter
Pearson bag inserter - uses poly roll bags. Built 2001. Set up for 50# cube 12" x 12" x 12" box but can be adjusted. Built 2001. Believed to be Model BI-18. Size range L 9.5-24", W 9.5-17", H 10-24". Serial number 200119289647, 3HP 460/3/60. Built 2001. Idled early 2017....
Bartelt Form Fill Seal Packager
Asset ID: 6125
Available: 1
### Bartelt Form Fill Seal Packager ###
- Model RH IM 7-12 (7 inch-12 station) w/All Fill B 350E auger filler
- E.M.P. registration control unit
- Equipped with side seal embossing and mechanical hole punch
- Machine No. 580
- Idled in 2018 - still installed in protected area. We will remove and load for no charge
It has the position for a second filler head. We have run an additional auger filler in that position as well as a volumetric filler in that position. Tear notch and various types auger tooling setups also available separately. Choose from 2 in., 3 1/2 in., 4 in., or 6 in. bag clamps. Very reliable packager. 3 phase 208-220/440 VAC. Selling because of production shut down.
Asset ID: 6125
Available: 1
Bartelt Form Fill Seal Packager
### Bartelt Form Fill Seal Packager ### - Model RH IM 7-12 (7 inch-12 station) w/All Fill B 350E auger filler - E.M.P. registration control unit - Equipped with side seal embossing and mechanical hole punch - Machine No. 580 - Idled in 2018 - still installed in protected area....
Bartelt Form Fill Seal Packager
Asset ID: 6126
Available: 1
### Bartelt horizontal form, fill, and seal Packager ###
- Model RH IM 6-7 (6 inch-7 station) w/B Filler
- Tritronics registration unit (Color Mark II, Model CMS 2B)
- Last ran 60 packages per minute on 1-gram fill
- Machine No. 336
Smooth/quiet running machine. 3 phase 208-220 VAC. Selling because of production shut down. Price includes loading on your truck - crating extra. Auxiliary equipment such as embossing and various types auger tooling setups available separately.
Asset ID: 6126
Available: 1
Bartelt Form Fill Seal Packager
### Bartelt horizontal form, fill, and seal Packager ### - Model RH IM 6-7 (6 inch-7 station) w/B Filler - Tritronics registration unit (Color Mark II, Model CMS 2B) - Last ran 60 packages per minute on 1-gram fill - Machine No. 336 Smooth/quiet running machine. 3 phase 208-220 VAC....
Vertical Form Fill Machine VFFS
Asset ID: 1085
Available: 2
### Like New Vertical Form Fill & Seal Machine (VFFS) ###
by Prodo-Pak. Tested - never used in production. VFF.
- One Model 4S 3P 320 line 3-lane with Laser etching printer. Fill rate at 150 to 180 pouches/minute.
Machine Size 7.5 ft x 7.5 ft x 9 ft tall 5,000 pounds
- Fill volume 1.0 to 3.0 ml. Pouch width 1.5 inches, pouch length 3.0 inches
- Was set up for filling semi-viscous gel products 1,000 to 5,000 centipoise into four sided seal pouches. Last used for hand sanitizer packets or sachets.
Includes the following additional pieces:
- Pump skid 80 inch x 48 inch x 60 inch tall 600 pounds
- Video Jet laser printer 7 ft x 7 ft x 77 inch tall 700 pounds.
- Video Jet fumes extractor 4 ft x 4 ft x 5 ft tall 300 pounds.
See LINKS for specifications.
Asset ID: 1085
Available: 2
Vertical Form Fill Machine VFFS
### Like New Vertical Form Fill & Seal Machine (VFFS) ### by Prodo-Pak. Tested - never used in production. VFF. - One Model 4S 3P 320 line 3-lane with Laser etching printer. Fill rate at 150 to 180 pouches/minute....
Metal Detector
Asset ID: 5072
Available: 1
Eriez Flow Through Metal Detector. Model EZ-DSP7.25LPVR, Style 9911198. Serial #191777
Approximate 6” diameter tube with diverter valve. Mounted on a stainless steel frame
Asset ID: 5072
Available: 1
Metal Detector
Eriez Flow Through Metal Detector. Model EZ-DSP7.25LPVR, Style 9911198. Serial #191777 Approximate 6” diameter tube with diverter valve. Mounted on a stainless steel frame
Metal Detector
Asset ID: 6152
Available: 1
LOCK inspection Systems, Met 30+, 3 1/2 in. x 14 in. aperture mounted on conveyor last used with a V/f/f/s machine. Conveyor is 12 in x 10 ft. long horizontally-transitioning to 68 inch long incline where the metal detector is located. Intralox modular conveyor belt. Horizontal section is 6 inches above floor and raises to discharge height of 40 inches. Currently using 1.5 MM NFe, 1.2 MM Fe, 2.0 MM SS
Asset ID: 6152
Available: 1
Metal Detector
LOCK inspection Systems, Met 30+, 3 1/2 in. x 14 in. aperture mounted on conveyor last used with a V/f/f/s machine. Conveyor is 12 in x 10 ft. long horizontally-transitioning to 68 inch long incline where the metal detector is located. Intralox modular conveyor belt....
Ink Jet Coder
Asset ID: 6158
Available: 1
Videojet 1550 (#3), Ink Jet Coding Machine, EXCEL Format, 120/240 Volt, 1Ph., 3 Amp, Serial No. 1404109C29ZH, Part No. 39582-793-01, w/infrared Fiber Optic Photocell (proximity), O.E.M. Mobile Stand, O.E.M. Static Printhead Stand. Running.
Asset ID: 6158
Available: 1
Ink Jet Coder
Videojet 1550 (#3), Ink Jet Coding Machine, EXCEL Format, 120/240 Volt, 1Ph., 3 Amp, Serial No. 1404109C29ZH, Part No. 39582-793-01, w/infrared Fiber Optic Photocell (proximity), O.E.M. Mobile Stand, O.E.M. Static Printhead Stand. Running.
Accumulation Table
Asset ID: 8560
Available: 1
Accumulator table for packaging bottles or cans. 36 inch diameter rotating table stainless steel with teflon guides, motor drive underneath with VFD speed control 120v single phase
Asset ID: 8560
Available: 1
Accumulation Table
Accumulator table for packaging bottles or cans. 36 inch diameter rotating table stainless steel with teflon guides, motor drive underneath with VFD speed control 120v single phase
Capper
Asset ID: 8562
Available: 1
### SureKap Capper SK6000-18.###
Fully automatic straight line six-spindle capper capable of running up to 90 caps per minute depending on cap diameter. Can handle cap sizes up to 48mm/CRC and 53mm/400.
- Does not include cap hopper, chute, or cap feeder assembly. Caps were placed manually
- Incudes bottle transport conveyor with Delrin table top and a VFD for speed control Motor is 1HP.
- Machine is idle now but was running 22mm dropper caps, manually placed. Manual available
Asset ID: 8562
Available: 1
Capper
### SureKap Capper SK6000-18.### Fully automatic straight line six-spindle capper capable of running up to 90 caps per minute depending on cap diameter. Can handle cap sizes up to 48mm/CRC and 53mm/400. - Does not include cap hopper, chute, or cap feeder assembly....
Capper
Asset ID: R3502
Available: 1
## Fowler Zalkin Automatic Capper with Cap Hopper & Feeder ##
- Single head inline capper. Includes stainless cap hopper, elevator, sorter, and chute.
- Set for 63mm caps but can run a variety of caps from 32mm with change parts. Screw on type
- Flex plastic conveyor belt, 8" wide through the capper
- Infeed plastic flex conveyor with 90 degree approx 12" wide, and outfeed plastic flex conveyor with 90 degree appro 12" wide
- Operators panel, Job #92099-A, ser FZ749
This is a complete capper, currently installed. Line speed 18 cpm on 35# jugs and 11 cpm on 17.5 lb jugs. Installed in 1992, Idled in early 2025 - scheduled for removal in May 2025. Ready for immediate shipment
**For more details on all components of the Jug In Box line (JIB Line), enter R3500 in search box**