Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Blower'
9 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Condition
Include all
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
)
)
)
Blower Fan 60HP + ss stack
Asset ID: cp102
Available: 1
Kice blower fan, Model FA33 ARR 9F, with inlet duct/transition. Fan is carbon steel with 36 inch inlet/outlet and 33 inch wheel. Airfoil fan wheel. Includes outlet duct/stack carbon steel duct 29" dia x 40 ft tall. Includes baseplate 60HP motor. Serial numbers 250431-4 & 250431-11. The fan has not been reconditioned but the motor is reconditioned. Depending on motor rpm, HP, and sp - cfm can be between 11,267 cfm and 25,039 cfm. See chart in links. This blower was sized for a baghouse silo (asset cp101) - both can be purchased together. Price here is for Blower/motor/stack only. Removed and ready to load
Asset ID: cp102
Available: 1
Blower Fan 60HP + ss stack
Kice blower fan, Model FA33 ARR 9F, with inlet duct/transition. Fan is carbon steel with 36 inch inlet/outlet and 33 inch wheel. Airfoil fan wheel. Includes outlet duct/stack carbon steel duct 29" dia x 40 ft tall. Includes baseplate 60HP motor. Serial numbers 250431-4 & 250431-11....
Tuthill Blowers 20HP (3)
Asset ID: 2032
Available: 3
Tuthill blowers (3) with (6) FlowTek automtic valve manifold with Bray acturators, FlowTek AutoMater. Used. System has now been removed, cleaned, and ready for sale. Blower driven by 20 HP motor 230/460v 3/60 1775 rpm.. Priced for the LOT - 3 blowers and the valve manifold
Asset ID: 2032
Available: 3
Tuthill Blowers 20HP (3)
Tuthill blowers (3) with (6) FlowTek automtic valve manifold with Bray acturators, FlowTek AutoMater. Used. System has now been removed, cleaned, and ready for sale. Blower driven by 20 HP motor 230/460v 3/60 1775 rpm.. Priced for the LOT - 3 blowers and the valve manifold
Blower Fan 50HP
Asset ID: AF93
Available: 1
Cardwell Industrial Exhauster blower, Size 350, Model IE857, serial 865-017-1. Approx size 60" front-to-back x 63" side-to-side x 65" tall. Blower 52" dia. Driven by Siemens motor 50 HP at 3545 rpm 460/3/60.
Asset ID: AF93
Available: 1
Blower Fan 50HP
Cardwell Industrial Exhauster blower, Size 350, Model IE857, serial 865-017-1. Approx size 60" front-to-back x 63" side-to-side x 65" tall. Blower 52" dia. Driven by Siemens motor 50 HP at 3545 rpm 460/3/60.
Blower PD Fan (Roots Type) 25HP
Asset ID: AF9
Available: 1
### Positive displacement blower (Roots Type)
- Gardner Denver Sutorbilt Legend Series vacuum pump Model GAFMCRD, serial S378101. Catalog No. 5MR. Gear dia 6"
- Inlet/Outlet size 4"
- Capacity 292 cfm at 7 psig to 263 cfm at 11 psig.
- Driven by 25HP motor at 1770 rpm. 460/3/60.
- In sound attenuating enclosure. Enclosure dimensions 45" x 45" x 48" tall.
See brochure in links.
Asset ID: AF9
Available: 1
Blower PD Fan (Roots Type) 25HP
### Positive displacement blower (Roots Type) - Gardner Denver Sutorbilt Legend Series vacuum pump Model GAFMCRD, serial S378101. Catalog No. 5MR. Gear dia 6" - Inlet/Outlet size 4" - Capacity 292 cfm at 7 psig to 263 cfm at 11 psig. - Driven by 25HP motor at 1770 rpm. 460/3/60....
Blower Kice 7.5HP
Asset ID: B2075
Available: 1
Kice Blower, Model FC9, clockwise Arrgt 9FB. SN: 145410. Physical size is 38" x 34" x 27" tall. Inlet diameter 9" OD, wheel diameter 15 5/8", wheel circumference 4.09', fan outlet area 0.5205 sq ft inside. Flow depends on static pressure - range with this 7.5 HP motor on it is from 600 cfm at 3" SP to 1800 cfm at 16" SP. Driven by 7.5 HP Reliance Electric Motor 480/3/60. See links for dimensions and performance charts. Aprox size for shipping 39" x 40" x 27" high. Removed, ready to ship
Asset ID: B2075
Available: 1
Blower Kice 7.5HP
Kice Blower, Model FC9, clockwise Arrgt 9FB. SN: 145410. Physical size is 38" x 34" x 27" tall. Inlet diameter 9" OD, wheel diameter 15 5/8", wheel circumference 4.09', fan outlet area 0.5205 sq ft inside....
Blower Fan 1000HP
Asset ID: B2106
Available: 1
Buffalo blower with 1000 HP motor. Blower Fan Type L, size 1200, tag L-25 serial num 88302107. Motor is Siemens induction motor 1000 HP 2300 volts 3/60. RPM 1780, frame 588US.
Asset ID: B2106
Available: 1
Blower Fan 1000HP
Buffalo blower with 1000 HP motor. Blower Fan Type L, size 1200, tag L-25 serial num 88302107. Motor is Siemens induction motor 1000 HP 2300 volts 3/60. RPM 1780, frame 588US.
Turbo Fan Blower 1800HP
Asset ID: B-1010
Available: 1
### Howden High Heat Blower - Never Used ###
**Howden High Heat Blower ExVel Turbo Fan**. Model HBXrG-20/675. Serial # NFF00019-10. Includes Siemens 1500 Series PLC, Bentley Nevada 3500 Series monitor system. This is NEW, old stock. Never used, still in protected crates.
- Design Pressure 272.4 psi and Temperature 446F
- Inlet Volume 6738.99 ACFM
- Main skid plus (1) nitrogen skid and (2) lube unit skids for fan and gear
**Driven by Toshiba 1800HP induction motor**
- Toshiba World Energy Series 3 phase induction motor, Serial # 140702955
- Model # 3VJM400LI6297I
- 1800 HP 3540 rpm 4160v 60 Hz 3 phase
ExVel™ turbo fans have unique, industry leading impeller and bearing technologies delivering the highest differential pressures available in the fan industry. They can replace more costly centrifugal compressors or multiple blowers with a single unit. This Howden Blower was to be part of the gasification system to move the hot syngas exiting the pyrolysis vessel in a biomass conversion system. It was never installed or used.
**Condition** - Still in crates. The crates are sealed against weather, protected, and in long term storage inside a third party protected warehouse. No known refurbishment required - assets are sold As Is Where Is.
Asset ID: B-1010
Available: 1
Turbo Fan Blower 1800HP
### Howden High Heat Blower - Never Used ### **Howden High Heat Blower ExVel Turbo Fan**. Model HBXrG-20/675. Serial # NFF00019-10. Includes Siemens 1500 Series PLC, Bentley Nevada 3500 Series monitor system. This is NEW, old stock. Never used, still in protected crates....
Upblast Fan
Asset ID: 2457
Available: 1
Upblast Blower fan still in crate - New, Old Stock
Generally Upblast fan, low silhouette with steel propeller. Mfg Loren Cook Co. Model 30 LXUL. Design 12,000 cfm at 0.125" sp. Fan rpm 870, Belt drive with 2 HP motor 3/60 460v 1725 rpm open drip proof. Motor in airstream.
Asset ID: 2457
Available: 1
Upblast Fan
Upblast Blower fan still in crate - New, Old Stock Generally Upblast fan, low silhouette with steel propeller. Mfg Loren Cook Co. Model 30 LXUL. Design 12,000 cfm at 0.125" sp. Fan rpm 870, Belt drive with 2 HP motor 3/60 460v 1725 rpm open drip proof. Motor in airstream.
NOL-TEC Pneumatic Conveying & Blowers
Asset ID: 7341
Available: 5
## DDG Unload & Convey System ##
#### **Package 1: 75 HP High-Pressure Blower System (QTY 2)**
Engineered for high-volume pneumatic conveying of raw materials, this package features a heavy-duty Gardner Denver blower integrated into a premium sound-attenuating enclosure.
* **Model:** HPP-GD514HF-75HP-6FS-6
* **Blower:** Gardner Denver Heliflow 514 HF
* **Motor:** 75 HP (1800 RPM, 460V, 3-Phase)
* **Enclosure:** Pro-C Sound Enclosure (Model PC72x48x72)
* **Included Instrumentation:**
* 1600 CFM Exhaust Fan with adjustable thermostat (60°F - 120°F)
* 0-15 PSI Pressure Gauge
* 6" Sch. 40 discharge piping
* Heavy-duty base and belt assembly
#### **Package 2: 30 HP Vacuum Blower System (QTY 3)**
Specialized vacuum package designed for material reclamation and unloading operations.
* **Model:** HVP-GD6L-30HP-6-6
* **Blower:** Gardner Denver Sutorbilt Legend 6L
* **Motor:** 30 HP TECO Westinghouse (1800 RPM, 460V, TEFC)
* **Enclosure:** Pro-C Sound Enclosure (Model PC72x48x72)
* **Integrated Components:**
* Vacuum Relief Valve (Pre-set at 10 in HgV)
* Inline Filter and Discharge Silencer
* 0-30 in HgV Vacuum Gauge and Vacuum Transmitter
* 6" ANSI Flanged Connections
These units were professionally engineered as part of a complete DDG handling system (Nol-Tec Project #9334). Full technical notation available upon request to facilitate rapid re-installation:
* **IOM Manuals:** Comprehensive Installation, Operation, and Maintenance manuals for both packages.
* **Mechanical Drawings:** Includes overall plan views and elevation drawings for rail/truck unload and silo fill lines.