Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Include all
Condition
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
All Assets from Category 'Heat exchanger'
60 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Include all
Condition
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Scraped Surface Heat Exchanger 9sf
Asset ID: 7107
Available: 1
Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel. Used. Model 6SSHE, S/N 90294EC, Mfg Number 00-17418, A5136. This unit has a BWS jacket suitable for brine, water, steam. Last use was to cool lecithin edible oil with cooling water. Driven by Blue motor 20HP motor 460 3/60 with 1755 rpm/230 rpm out. All wetted surfaces are stainless steel 304, barrel is Chromium plated Nickel. Has 4 rows of ss blades (24 total). MAWP shell 250 psig at 375F/-20F, jacket 150 psig at 375F/-20F. Heat exchange surface area 9 sq ft. Gear reducer Reynold ser No. 3455353, size 5. ratio 7.63:1, output 230 rpm. Volume in tube (product) 880 cu in, volume in jacket 1080 cu in. Physical weight of cylinder & tube is 1100 pounds. Total weight with frame & motor is approx 2500 pounds. Sold As Is - we can recondition for you for additional. See drawings in LINK. Price includes removal & loading on your truck Sold As Is Where Is however, this unit can be reconditioned for additional cost. Cleaned, painted, inspected, new seal, new bearings - 3 month guarantee material and workmanship. New blades and barrel re-chrome are extra options.
- Photos show unit as-installed, and as-removed now in lay down yard ready to load.
- We have two of these units - see also asset number 7108
Asset ID: 7107
Available: 1
Scraped Surface Heat Exchanger 9sf
Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel. Used. Model 6SSHE, S/N 90294EC, Mfg Number 00-17418, A5136. This unit has a BWS jacket suitable for brine, water, steam. Last use was to cool lecithin edible oil with cooling water....
Scraped Surface Heat Exchanger 9sf
Asset ID: 7108
Available: 1
Votator Scraped Surface Heat Exchanger 6x72 single barrel. Used - Model 1C672L, S/N 35464VA. This unit has a BWS jacket suitable for brine, water, steam. Lat use to cool lecithin edible oil with cooling water. All wetted surfaces are stainless steel 304, barrel is Chromium plated Nickel. Has fours rows of ss blades (24 total). MAWP tube 400 psi at 375F/-20F, jacket 150 psig at 375F/-20F. Heat exchange surface area 9 sq ft. Volume in tube (product) 910 cu in, volume in jacket 2,000 cu in. Driven by 20 HP black motor 460 3/60 with 1755 rpm/222 rpm out Physical weight of cylinder & tube is 1150 pounds. Total weight with frame & motor is approx 2500 pounds. See drawings in LINK. Price includes removal & loading on your truck Sold As Is Where Is however, this unit can be reconditioned for additional cost. Cleaned, painted, inspected, new seal, new bearings - 3 month guarantee material and workmanship. New blades and barrel re-chrome are extra options.
- Photos show unit as-installed, and as-removed now in lay down yard ready to load.
- We have two of these units - see also asset number 7107
Asset ID: 7108
Available: 1
Scraped Surface Heat Exchanger 9sf
Votator Scraped Surface Heat Exchanger 6x72 single barrel. Used - Model 1C672L, S/N 35464VA. This unit has a BWS jacket suitable for brine, water, steam. Lat use to cool lecithin edible oil with cooling water. All wetted surfaces are stainless steel 304, barrel is Chromium plated Nickel....
Scraped Surface Heat Exchanger
Asset ID: 7145
Available: 1
Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can recondition if needed. S/N 3455353. Direct Driven by 20HP motor, 1755 rpm/230 rpm out. All wetted surfaces are stainless steel 304, barrel is Chromium plated Nickel. Has 4 rows of ss blades (24 total). MAWP shell 250 psig at 375F/-20F, jacket 150 psig at 375F/-20F. Heat exchange surface area 9 cu ft. Gear reducer Reynold ser No. 3455353, size 5. ratio 7.63:1, output 230 rpm. Volume in tube (product) 880 cu in, volume in jacket 1080 cu in. Physical weight of cylinder & tube is 1100 pounds. Total weight with frame & motor is approx 2500 pounds. Price includes removal & loading on your truck Sold As Is Where Is however, this unit can be reconditioned for additional cost. Cleaned, painted, inspected, new seal, new bearings - 3 month guarantee material and workmanship. New blades and barrel re-chrome are extra options
Asset ID: 7145
Available: 1
Scraped Surface Heat Exchanger
Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can recondition if needed. S/N 3455353. Direct Driven by 20HP motor, 1755 rpm/230 rpm out. All wetted surfaces are stainless steel 304, barrel is Chromium plated Nickel....
Heat Exchanger, Plate
Asset ID: X2009
Available: 1
Plate heat exchanger. Type P2 Fill, rated at 110C and 6 kg/cm2. Specs unknown - used as CFI Heat Exchanger
Asset ID: X2009
Available: 1
Heat Exchanger, Plate
Plate heat exchanger. Type P2 Fill, rated at 110C and 6 kg/cm2. Specs unknown - used as CFI Heat Exchanger
Heat Exchanger, Plate
Asset ID: X2010
Available: 1
Plate heat exchanger. Specs unnown - used as Next to CFI
Asset ID: X2010
Available: 1
Heat Exchanger, Plate
Plate heat exchanger. Specs unnown - used as Next to CFI
Heat Exchanger, Shell & Tube
Asset ID: X2017
Available: 1
Shell & Tube heat exchanger. Must measure size but approx 1 ft dia x 8 ft long. Specs unknown - Last used as Heat Exchanger Next to Glycerin Tanks
Asset ID: X2017
Available: 1
Heat Exchanger, Shell & Tube
Shell & Tube heat exchanger. Must measure size but approx 1 ft dia x 8 ft long. Specs unknown - Last used as Heat Exchanger Next to Glycerin Tanks
Heat Exchanger, Plate
Asset ID: X2021
Available: 1
Plate heat exchanger. Specs unknown - last used as Small Heat Exchanger Under glycerin colaescer Column
Asset ID: X2021
Available: 1
Heat Exchanger, Plate
Plate heat exchanger. Specs unknown - last used as Small Heat Exchanger Under glycerin colaescer Column
Heat Exchanger, Plate
Asset ID: X2047
Available: 1
Plate heat exchanger by GEA. ASME Nat'l Bd # 2834. Specs unknown - last used as Heat Ex from MRU
Asset ID: X2047
Available: 1
Heat Exchanger, Plate
Plate heat exchanger by GEA. ASME Nat'l Bd # 2834. Specs unknown - last used as Heat Ex from MRU
Methanol Condensor
Asset ID: X2053
Available: 1
Plate heat echanger used as a methanol condenser. Specs unknown
Asset ID: X2053
Available: 1
Methanol Condensor
Plate heat echanger used as a methanol condenser. Specs unknown
Heat Exchanger, Plate
Asset ID: X2056
Available: 1
Plate heat exchanger. Specs unknown - last used as MRU Bio Cooler North
Asset ID: X2056
Available: 1
Heat Exchanger, Plate
Plate heat exchanger. Specs unknown - last used as MRU Bio Cooler North
Heat Exchanger, Plate
Asset ID: X2057
Available: 1
Plate heat echanger. Specs unknown - last used as MRU Bio Cooler South
Asset ID: X2057
Available: 1
Heat Exchanger, Plate
Plate heat echanger. Specs unknown - last used as MRU Bio Cooler South
Heat Exchanger, Plate
Asset ID: X2088
Available: 2
Plate heat exchanger. Specs unknown - last used as oil dryer coolers. Qty (2) - priced separately..
Asset ID: X2088
Available: 2
Heat Exchanger, Plate
Plate heat exchanger. Specs unknown - last used as oil dryer coolers. Qty (2) - priced separately..
Heat Exchanger, Plate
Asset ID: X2098
Available: 1
GEA PHE plate heat exchanger, Model NT150, serial number EIA-160/50072. MAWP 150 psig at 300F. 88 plates (dimension 12.7 inches). Excellent condition, lightly used in warehouse.
Asset ID: X2098
Available: 1
Heat Exchanger, Plate
GEA PHE plate heat exchanger, Model NT150, serial number EIA-160/50072. MAWP 150 psig at 300F. 88 plates (dimension 12.7 inches). Excellent condition, lightly used in warehouse.
Heat Exchanger, Plate 94sf
Asset ID: X2099
Available: 1
Alfa Laval plate heat exchanger model M10. Has 42 plates at 0.5 mm spacing for 94.7 sq ft surface area. MAWP 150 psig at 190F. Serial number 30115-74342. Excellent condition, lightly used in warehouse.
Asset ID: X2099
Available: 1
Heat Exchanger, Plate 94sf
Alfa Laval plate heat exchanger model M10. Has 42 plates at 0.5 mm spacing for 94.7 sq ft surface area. MAWP 150 psig at 190F. Serial number 30115-74342. Excellent condition, lightly used in warehouse.
Heat Exchanger, Shell & Tube 1181sf
Asset ID: E-7201X
Available: 1
Heat exchanger shell & tube by DCR. Size 28 OD" x 159" long, horizontal on saddles, insulated. Has 615 ss304 tubes at 0.75" OD for surface area of 1,181.1 sq ft. sn 7201-7793 ASMA NB# 214 MAWP 150 shell/ 150 tube psig at -20/400F. TEMA Design BEM CLASS: C. Material CS Shell/SS304 Tubes. Shell side steam/tube side beer Used as Flash Recovery Condenser
Asset ID: E-7201X
Available: 1
Heat Exchanger, Shell & Tube 1181sf
Heat exchanger shell & tube by DCR. Size 28 OD" x 159" long, horizontal on saddles, insulated. Has 615 ss304 tubes at 0.75" OD for surface area of 1,181.1 sq ft. sn 7201-7793 ASMA NB# 214 MAWP 150 shell/ 150 tube psig at -20/400F. TEMA Design BEM CLASS: C. Material CS Shell/SS304 Tubes....
Heat Exchanger, Shell & Tube 1819sf
Asset ID: 8084
Available: 1
Heat Exchanger, Mfg by Thermotran. Tube & shell material both are carbon steel. MAWP: Shell Pressure 150 psig at 150F. Tube Pressure 1040 psig at 355F. Arrangement is 2-pass shell and 2-pass tubes. Has 340 tubes 0.75" dia x13 feet. Heat exchanger overall length 18.75 feet. Shell 2 ft-10" dia x 1/2 inch thick. ASME NB# 139, S/N H-1441. Inlet/outlet 10". Designed for 306,500 #/hr water shell side at 630 gpm. Designed for syngas tubeside 107,813 #/hr. Heat exchanged 9.2 MMBTU/hr. See link for U-1 and heat exchanger drawing.
Asset ID: 8084
Available: 1
Heat Exchanger, Shell & Tube 1819sf
Heat Exchanger, Mfg by Thermotran. Tube & shell material both are carbon steel. MAWP: Shell Pressure 150 psig at 150F. Tube Pressure 1040 psig at 355F. Arrangement is 2-pass shell and 2-pass tubes. Has 340 tubes 0.75" dia x13 feet. Heat exchanger overall length 18.75 feet....
Circulation Heat Exchanger 40KW
Asset ID: 2103
Available: 1
### Circulation Heat Exchanger Package - Electric Immersion Heater 40KW ###
Skid mounted Circulation Heater Package (CHP) is designed for the use of heating fluids in a self-contained packaged unit that is engineered for processing. The CHP Series of Custom Engineered, In-Line Electric Circulation Heater Package uses a flanged electric immersion heater as the heat source. Heat capacity 40KW (137,500 BTU/hr)
Design Data:
- Model # CHP1036-40-59S-483, serial # 05-4901-1A,
- Skid Mounted
- Temperature Limit: 50F Min. / 300F Max
- Pressure Limits: 0 psig Min. / 150 psig Max.
- Initial Fill: 22 gallons, Inlet/Outlet connections 2" NPT
Operational Data:
- Fluid- Designed for Vegetable Oil but can be used with any liquid
- Heater rating: Input heat 40.3 KW on 480v 3/60 48.5 FLA (137,500 BTU/hr)
- Control panel with Watlow cycling high temperature limit switch and temp control
Utilities:
- Power supply- 480 V/ 3 Phase/ 60Hz; 125 Amp service
- Electrical Classification- NEMA 12
Asset ID: 2103
Available: 1
Circulation Heat Exchanger 40KW
### Circulation Heat Exchanger Package - Electric Immersion Heater 40KW ### Skid mounted Circulation Heater Package (CHP) is designed for the use of heating fluids in a self-contained packaged unit that is engineered for processing....
Heat Exchanger 5700 sf
Asset ID: 1340
Available: 1
Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, 8 Pass U Tube. ASME "N" Stamp NB # 3607. Horizontal. Carbon steel shell rated MAWP 150 psi at 200 degrees F, diameter 55.5" OD. Tubes: (1194) 3/4" Diameter x 11' long; 304L stainless steel tubes rated MAWP 150 psi at 200 degrees F. 304L Stainless steel head and tubesheets. Openings for shell (2) 14", for tubes (2) 10". Mounted on saddles. Serial # 2692B, Built 2012.
Asset ID: 1340
Available: 1
Heat Exchanger 5700 sf
Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, 8 Pass U Tube. ASME "N" Stamp NB # 3607. Horizontal. Carbon steel shell rated MAWP 150 psi at 200 degrees F, diameter 55.5" OD....
Heat Exchanger
Asset ID: H-802
Available: 1
Rubicon Economizer Model WC10B1-168HE, MAWP Shell 100 psi @ 400F, Tubes 75 psi @ 400F, MDMT Shell -20F @ 100 psi, Tubes -20 @ 75 psi, S/N 40242
Asset ID: H-802
Available: 1
Heat Exchanger
Rubicon Economizer Model WC10B1-168HE, MAWP Shell 100 psi @ 400F, Tubes 75 psi @ 400F, MDMT Shell -20F @ 100 psi, Tubes -20 @ 75 psi, S/N 40242
Reoiler Heat Exchanger
Asset ID: H-706
Available: 1
Reboiler 30 inch dia. X 221.375 inches H, 1635 sq ft area; design pressure 150 psi @ 500F, Tubes 75 psi @ 350 F
Asset ID: H-706
Available: 1
Reoiler Heat Exchanger
Reboiler 30 inch dia. X 221.375 inches H, 1635 sq ft area; design pressure 150 psi @ 500F, Tubes 75 psi @ 350 F
Reboiler Heat Exchanger 1635 sf
Asset ID: H-809
Available: 1
Rubicon Heat exchanger, MAWP Shell 150 psi @ 750F, Tubes 75 psi @ 500F, MDMT -20F @ 150 psi, Tubes -20F @ 75 psi, S/N 4026, Model VT22C1-168VE, 22 inch dia x 218.75 inches, 1635 sq ft
Asset ID: H-809
Available: 1
Reboiler Heat Exchanger 1635 sf
Rubicon Heat exchanger, MAWP Shell 150 psi @ 750F, Tubes 75 psi @ 500F, MDMT -20F @ 150 psi, Tubes -20F @ 75 psi, S/N 4026, Model VT22C1-168VE, 22 inch dia x 218.75 inches, 1635 sq ft
Heat Exchanger
Asset ID: H-409
Available: 1
API Basco heat exchanger 12 x 306 AW hairpin (stacked) P/N 1470-12-306-000, S/N E140279-901. Shell MAWP 110 psi @ 650F MAWP, Tubes 3320 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3320 psi. 337.38 inch OAH, 337.38 inch OAL, 57.63 inch OAW, Year 2014, Empty Weight 29185 lbs
Asset ID: H-409
Available: 1
Heat Exchanger
API Basco heat exchanger 12 x 306 AW hairpin (stacked) P/N 1470-12-306-000, S/N E140279-901. Shell MAWP 110 psi @ 650F MAWP, Tubes 3320 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3320 psi. 337.38 inch OAH, 337.38 inch OAL, 57.63 inch OAW, Year 2014, Empty Weight 29185 lbs
Evaporator Condenser 9498sf
Asset ID: 8068
Available: 1
Unused Crown Iron Works 9498 sqft (882 sqmt) 304 ss horizontal evaporator condenser. Has (2016) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long 304 stainless steel tubes rated 55 psi (3.70 bar) design pressure at 100 deg.f (38 deg.c). Has 56 inch (1422 mm) diameter x 24 ft (7315 mm) long shell rated +/-15 psi (-1.03/1.03 bar) design pressure at 212 deg.f (100 deg.c). 4 pass tube side, 2 pass shell side. New 2004. Vapor inlet 36:. Shell 56" OD x 24 ft.Overall size 6 ft top to bottom x 27ft-2" long, empty weight approx 32,970 pounds
Asset ID: 8068
Available: 1
Evaporator Condenser 9498sf
Unused Crown Iron Works 9498 sqft (882 sqmt) 304 ss horizontal evaporator condenser. Has (2016) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long 304 stainless steel tubes rated 55 psi (3.70 bar) design pressure at 100 deg.f (38 deg.c)....
Condenser 374sf
Asset ID: 8071
Available: 1
Unused Crown Iron Works 374 sq ft (35 sq mt) horizontal condenser. Has (119) 3/4 inch (19.05 mm) diameter x 16 feet (4877 mm) long 304l stainless steel tubes rated -15/75 psi (-1.03/5.17 bar) design pressure at 250 deg F (121 deg C). Has 14 inch (356 mm) diameter x 16 ft (4877 mm) long carbon steel shell rated -15/165 psi (-1.03/11.37 bar) design pressure at 300 deg F (149 deg C). New 2004.
Asset ID: 8071
Available: 1
Condenser 374sf
Unused Crown Iron Works 374 sq ft (35 sq mt) horizontal condenser. Has (119) 3/4 inch (19.05 mm) diameter x 16 feet (4877 mm) long 304l stainless steel tubes rated -15/75 psi (-1.03/5.17 bar) design pressure at 250 deg F (121 deg C)....
Heat Exchanger, Shell & Tube 280sf
Asset ID: 31-E-234
Available: 1
Shell & Tube heat exchanger, Rated at 800 psi 0.364 MMBTU/hr, Treated Gas 21/100F, Raw Syn Gas 110/64F. Shell & tube, TEMA design NEN, 280 sq ft, 0.75/0.065, 3237 #. Physical size 10 in dia x 23 ft 5 1/8 inch long. On channel saddles 2'-6". ASME MAWP 800/Fv at 350F shell, 800/fv at 250F tubes. Manufactured by Precision Pipe & Vessel (PPV) in 2009. Material tubes 304L Stainless/shell CS. Insulated calcium silicate. See drawing in Links. Used for Gas Clean-up Feed/Effluent Exchanger. Part of fp311. Still installed - will be difficult to remove.
Asset ID: 31-E-234
Available: 1
Heat Exchanger, Shell & Tube 280sf
Shell & Tube heat exchanger, Rated at 800 psi 0.364 MMBTU/hr, Treated Gas 21/100F, Raw Syn Gas 110/64F. Shell & tube, TEMA design NEN, 280 sq ft, 0.75/0.065, 3237 #. Physical size 10 in dia x 23 ft 5 1/8 inch long. On channel saddles 2'-6"....
Heat Exchanger Hairpin 862 sf
Asset ID: H-208
Available: 1
Heat Exchanger by API Basco 10 x 300 AW Hairpin P/N 1470-10-300-000. S/N E140279-101. Shell MAWP 110 psi @ 690F, Tubes 3360 psi @ 775F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3360 psi. 57.25 OAH, 42 inch OAW, 329.88 OAL, 861.84 sq ft area
Asset ID: H-208
Available: 1
Heat Exchanger Hairpin 862 sf
Heat Exchanger by API Basco 10 x 300 AW Hairpin P/N 1470-10-300-000. S/N E140279-101. Shell MAWP 110 psi @ 690F, Tubes 3360 psi @ 775F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3360 psi. 57.25 OAH, 42 inch OAW, 329.88 OAL, 861.84 sq ft area
Heat Exchanger, Shell & Tube 135 sf
Asset ID: 31-E-236
Available: 1
Shell & tube heat exchanger, Surface area 135 sq ft, physical size 10 in dia x 8.5 ft long. Designed for 1.44 MMBTU/hr, operating pressure 80 psig. Shell side Steam 324psi/307F, tube side HP Solvent 102psi/125F. ASME rated at shell 150 psi at 400F, tube 200 psi at 250F. TEMA Design NEN. Has 81 tubes 3/4" 14 gage tubing, 0.75/0.083, empty weight 1913 #. Manufactured by Precision Pipe & Vessel in 2009 - ran only 42 days - like new. Material: shell is seamless pipe carbon steel SA-106 grade B, tubes are carbon steel 14 gage. We have drawing in Links. Used as High Pressure Liquid Heater on fp311. Still installed - allow 2-3 weeks for removal and loading.
Asset ID: 31-E-236
Available: 1
Heat Exchanger, Shell & Tube 135 sf
Shell & tube heat exchanger, Surface area 135 sq ft, physical size 10 in dia x 8.5 ft long. Designed for 1.44 MMBTU/hr, operating pressure 80 psig. Shell side Steam 324psi/307F, tube side HP Solvent 102psi/125F. ASME rated at shell 150 psi at 400F, tube 200 psi at 250F. TEMA Design NEN....
Heat Exchanger, Plate 4448 sf
Asset ID: 6013
Available: 1
Used Polaris Plate Heat Exchanger. 304 Stainless Steel. Approximately 4,448.50 Square Feet. (330) Stainless steel plates. Rated 150 psi at 284 degrees F. (4) 12" diameter inlet/outlets. Flow rate 3600 gallons per minute. Maximum # of plates 348. Mounted on a painted carbon steel expandable frame. Serial# 11738. Built 2010.
Asset ID: 6013
Available: 1
Heat Exchanger, Plate 4448 sf
Used Polaris Plate Heat Exchanger. 304 Stainless Steel. Approximately 4,448.50 Square Feet. (330) Stainless steel plates. Rated 150 psi at 284 degrees F. (4) 12" diameter inlet/outlets. Flow rate 3600 gallons per minute. Maximum # of plates 348. Mounted on a painted carbon steel expandable frame....
Heat Exchanger Plate Pack
Asset ID: 2369
Available: 1
72 new plates for Alfa Laval TS20M heat exchanger. 316ss 0.6mm Flow Plate w/ EPDM Flow Gasket
Asset ID: 2369
Available: 1
Heat Exchanger Plate Pack
72 new plates for Alfa Laval TS20M heat exchanger. 316ss 0.6mm Flow Plate w/ EPDM Flow Gasket
Heat Exchanger
Asset ID: H-103
Available: 1
Heat Exchanger 7.09" W x 1905" H x 9" L, 10.7 Sq Ft area
Asset ID: H-103
Available: 1
Heat Exchanger
Heat Exchanger 7.09" W x 1905" H x 9" L, 10.7 Sq Ft area
Heat Exchanger
Asset ID: H-503
Available: 1
Rubicon Heat exhanger, Shell & Tube, SS304, MAWP Shell 150 psi @ 450F, Tubes 150 psi @ 350F, MDMT Shell -20 @ 450F, Tubes -20@350F, S/N 4021-2, 8 5/8 inch O.D. x 71 7/8" L, 71.6 sq ft area, Model VT8A1-72VE
Asset ID: H-503
Available: 1
Heat Exchanger
Rubicon Heat exhanger, Shell & Tube, SS304, MAWP Shell 150 psi @ 450F, Tubes 150 psi @ 350F, MDMT Shell -20 @ 450F, Tubes -20@350F, S/N 4021-2, 8 5/8 inch O.D. x 71 7/8" L, 71.6 sq ft area, Model VT8A1-72VE
Flash Drum
Asset ID: 31-V-164
Available: 1
Flash drum, Manufactured by Precision Pipe & Vessel in 2009 - ran 42 days only - like new. Physical size 72" dia x 11'-6" . Has demister pad at top of vessel. Has a 5'-6" skirt on bottom and a 4 ft top skirt for OAH of20'-8" tall. Inlet 4", vapor outlet 1-1/2", liquid outlet 4". ASME rated MAWP 200/FV at 250F. Nat'l Bd# 879, s/n CV-0884. Material: carbon steel SA-516-70 with 2" insulation and ss covering. Note: Photos show both the flash drums stacked on top of each other. Part of module fp311. Used as Flash Drum, High Pressure
Asset ID: 31-V-164
Available: 1
Flash Drum
Flash drum, Manufactured by Precision Pipe & Vessel in 2009 - ran 42 days only - like new. Physical size 72" dia x 11'-6" . Has demister pad at top of vessel. Has a 5'-6" skirt on bottom and a 4 ft top skirt for OAH of20'-8" tall. Inlet 4", vapor outlet 1-1/2", liquid outlet 4"....
Heat Exchanger
Asset ID: H-406
Available: 1
API Basco heat exchanger 10 x 324 AW Hairpin P/N 1470-10-324-000, S/N E140279-701. MAWP Shell 110 psi @ 650F, Tubes 3360 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3360 psi. 57.25 inch OAH, 356 inch OAL, 42 inch OAW
Asset ID: H-406
Available: 1
Heat Exchanger
API Basco heat exchanger 10 x 324 AW Hairpin P/N 1470-10-324-000, S/N E140279-701. MAWP Shell 110 psi @ 650F, Tubes 3360 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3360 psi. 57.25 inch OAH, 356 inch OAL, 42 inch OAW
Condenser Vertical SS 1148sf
Asset ID: 7893
Available: 1
Used condenser manufactured by Melter approximately 1148 sq. ft. surface area. Vertical 316L stainless steel shell and tube heat exchanger. Size 28" diameter X 7'-9" face to face length. Carbon steel shell rated 150 PSI @ 302 degrees F, Has (731) 3/4" OD 316L stainless steel tubes rated 116/FV@ 302 degrees F. S/N MDI-763-7, ASME NB# 401. Nozzles: (2) 3" service nozzles. (1) 4" and (1) 10" inlet and outlet on the process side. (4) 2" inlets and outlets for level and (2) 1.5" nozzles for temperature. Last used as a water stripper column condenser. We will hydrotest upon issuance of purchase order.
Removed - ready to load.
Asset ID: 7893
Available: 1
Condenser Vertical SS 1148sf
Used condenser manufactured by Melter approximately 1148 sq. ft. surface area. Vertical 316L stainless steel shell and tube heat exchanger. Size 28" diameter X 7'-9" face to face length....
Heat Exchanger
Asset ID: H-308
Available: 1
API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-12-300-000, S/N E140279-401. Shell 110 psi @ 650F MAWP, Tubes 3360 psi @ 590F, Shell - 20F @ 110 psi, Tubes -20F @ 3360 psi. 61.63 inch OAH, 332.38 inch OAL, 45 inch OAW. Year 2014, Empty Weight 14305 lbs
Asset ID: H-308
Available: 1
Heat Exchanger
API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-12-300-000, S/N E140279-401. Shell 110 psi @ 650F MAWP, Tubes 3360 psi @ 590F, Shell - 20F @ 110 psi, Tubes -20F @ 3360 psi. 61.63 inch OAH, 332.38 inch OAL, 45 inch OAW. Year 2014, Empty Weight 14305 lbs
Condenser 1950sf
Asset ID: 8069
Available: 1
Unused Crown Iron Works stripper condenser 1950 sqft (181 sqmt) has (414) 3/4 inch (19.05 mm) diameter x 24 feet (7315 mm) long t304 stainless steel tubes rated 45 psi (3.1 bar). Has 24 inch (610 mm) diameter x 24 ft (7315 mm) long carbon steel shell rated 15 psi (1.03 bar). Was used as stripper condenser
Asset ID: 8069
Available: 1
Condenser 1950sf
Unused Crown Iron Works stripper condenser 1950 sqft (181 sqmt) has (414) 3/4 inch (19.05 mm) diameter x 24 feet (7315 mm) long t304 stainless steel tubes rated 45 psi (3.1 bar). Has 24 inch (610 mm) diameter x 24 ft (7315 mm) long carbon steel shell rated 15 psi (1.03 bar)....
Heat Exchanger
Asset ID: H-803
Available: 1
Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 100 psi @ 250F, Tubes 100 psi @ 350F, MDMT Shell - 20 F @ 100psi, Tubes -20 @ 50psi, S/N 4024-3, WC18B1-168HE, 18 inch diameter x 194.875 inch L
Asset ID: H-803
Available: 1
Heat Exchanger
Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 100 psi @ 250F, Tubes 100 psi @ 350F, MDMT Shell - 20 F @ 100psi, Tubes -20 @ 50psi, S/N 4024-3, WC18B1-168HE, 18 inch diameter x 194.875 inch L
Evaporative Condenser 5013sf
Asset ID: 8066
Available: 1
Unused Crown Iron Works approximately 5013 sqft (466 sqmt) 1st stage evaporator. T304 stainless steel tubes has (1064) 3/4 inch (19.05 mm) diameter x 24 feet (7315 mm) long 304 stainless steel tubes rated 15 psi/full vac (1.03 bar/full vac) design pressure. Has 58 inch (1473 mm) diameter x 24 feet (7315 mm) long shell rated +/-1 psi (-0.06/0.06 bar) design pressure. New 2004.
Asset ID: 8066
Available: 1
Evaporative Condenser 5013sf
Unused Crown Iron Works approximately 5013 sqft (466 sqmt) 1st stage evaporator. T304 stainless steel tubes has (1064) 3/4 inch (19.05 mm) diameter x 24 feet (7315 mm) long 304 stainless steel tubes rated 15 psi/full vac (1.03 bar/full vac) design pressure....
Heat Exchanger
Asset ID: H-1001
Available: 1
Heat Exchanger MAWP Shell 125 psi @ 500F, Tubes 125 psi @ 750F, MDMT Shell -20F @ 125 psi, -20F @ 125 psi, S/N 4031-2
Asset ID: H-1001
Available: 1
Heat Exchanger
Heat Exchanger MAWP Shell 125 psi @ 500F, Tubes 125 psi @ 750F, MDMT Shell -20F @ 125 psi, -20F @ 125 psi, S/N 4031-2
Heat Exchanger
Asset ID: H-810
Available: 1
Rubicon Heat exchanger, MAWP shell 100 psi @ 250F, Tubes 100 psi @ 500F, MDMT -20F, Model WC4B1-168HE, S/N 4024-4, 4 1/2 inch OD x 185 inch OAL
Asset ID: H-810
Available: 1
Heat Exchanger
Rubicon Heat exchanger, MAWP shell 100 psi @ 250F, Tubes 100 psi @ 500F, MDMT -20F, Model WC4B1-168HE, S/N 4024-4, 4 1/2 inch OD x 185 inch OAL
Heat Exchanger, Plate ss 280 sf
Asset ID: E-1513
Available: 1
APV stainless steel plate heat exchanger. MAWP 200 PSI @ 320 F. MDMT -20 F @ 200 PSI. Surface area: 280 sq. ft. with 2" inlets/outlets. Includes 153 ss316 plates at 0.6mm thick. S/N 30326.1. Last used as a product cooler for ethanol. See drawing for more information.
Asset ID: E-1513
Available: 1
Heat Exchanger, Plate ss 280 sf
APV stainless steel plate heat exchanger. MAWP 200 PSI @ 320 F. MDMT -20 F @ 200 PSI. Surface area: 280 sq. ft. with 2" inlets/outlets. Includes 153 ss316 plates at 0.6mm thick. S/N 30326.1. Last used as a product cooler for ethanol. See drawing for more information.
Heat Exchanger, Plate 539 sf
Asset ID: X-400B
Available: 1
Alfa Laval Plate & Frame Heat Exchanger, Model FC-500-WTFE., sn 30105-54317. MAWP 55 psi at 302F. Surface area 539.6 sf, (19) plates at 0.6 mm gap cassette. Frame will be cleaned and painted. Includes plates. Entire heat exchanger has been disassembled and repainted. Plates are stacked ready to ship.
Asset ID: X-400B
Available: 1
Heat Exchanger, Plate 539 sf
Alfa Laval Plate & Frame Heat Exchanger, Model FC-500-WTFE., sn 30105-54317. MAWP 55 psi at 302F. Surface area 539.6 sf, (19) plates at 0.6 mm gap cassette. Frame will be cleaned and painted. Includes plates. Entire heat exchanger has been disassembled and repainted....
Heat Exchanger
Asset ID: H-104
Available: 1
Heat Exchanger by WCR, Single pass flow heat exchanger
Asset ID: H-104
Available: 1
Heat Exchanger
Heat Exchanger by WCR, Single pass flow heat exchanger
Heat Exchanger
Asset ID: H-309
Available: 1
API Basco heat exchanger 4 x 132 AW Hairpin P/N 1470-04-132-000, S/N E140279-501. MAWP Shell 110 psi @ 820F, Tubes 3350 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3350 psi. 34.38 inch OAH, 152.69 inch OAL, 21 inch OAW
Asset ID: H-309
Available: 1
Heat Exchanger
API Basco heat exchanger 4 x 132 AW Hairpin P/N 1470-04-132-000, S/N E140279-501. MAWP Shell 110 psi @ 820F, Tubes 3350 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3350 psi. 34.38 inch OAH, 152.69 inch OAL, 21 inch OAW
Heat Exchanger
Asset ID: H-209
Available: 1
API Basco heat exchanger 6 x 132 AW Hairpin P/N 1470-06-132-000, S/N E140279-201. MAWP Shell 110 psi @ 820F, Tubes 3350 psi @ 775F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3350 psi. 41.63 inch OAH, 154.56 inch OAL, 28.25 OAW, 129.82 sq ft
Asset ID: H-209
Available: 1
Heat Exchanger
API Basco heat exchanger 6 x 132 AW Hairpin P/N 1470-06-132-000, S/N E140279-201. MAWP Shell 110 psi @ 820F, Tubes 3350 psi @ 775F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3350 psi. 41.63 inch OAH, 154.56 inch OAL, 28.25 OAW, 129.82 sq ft
Heat Exchanger, Plate 277 sf
Asset ID: X-410
Available: 1
Tranter Plate & Frame Heat Exchanger, Model TW-108-HP-33. MAWP 150 psi at 250F; Surface area 277.8 sf w/approx 26 plates. Includes plates. Entire heat exchanger has been disassembled and repainted. Plates are stacked ready to ship.
Asset ID: X-410
Available: 1
Heat Exchanger, Plate 277 sf
Tranter Plate & Frame Heat Exchanger, Model TW-108-HP-33. MAWP 150 psi at 250F; Surface area 277.8 sf w/approx 26 plates. Includes plates. Entire heat exchanger has been disassembled and repainted. Plates are stacked ready to ship.
Heat Exchanger
Asset ID: H-407
Available: 1
API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-04-120-000, S/N E140279-801. Shell MAWP 110 psi @ 820 MAWP, Tubes 3350 psi @ 690F, MDMT Shell - 20F @ 110 psi, Tubes -20F @ 3350 psi. 34.38 inch OAH, 141.69 inch OAL, 21 inch OAW, Year 2014, Empty Weight 1800 lbs
Asset ID: H-407
Available: 1
Heat Exchanger
API Basco heat exchanger 12 x 300 AW hairpin P/N 1470-04-120-000, S/N E140279-801. Shell MAWP 110 psi @ 820 MAWP, Tubes 3350 psi @ 690F, MDMT Shell - 20F @ 110 psi, Tubes -20F @ 3350 psi. 34.38 inch OAH, 141.69 inch OAL, 21 inch OAW, Year 2014, Empty Weight 1800 lbs
Heat Exchanger, Shell & Tube 2151sf
Asset ID: 41-E-112
Available: 1
Heat exchanger shell & tube TEMA AEU design. U-tube type, Heat transfer area 2151 sq ft, ASME MAWP tubes 1650 psig/FV at 385F, shell 150 psig at 250F. Nat'l Bd # 2932, serial# 4017C. Rated for 98 MMBTU/hr, Water 90/110F, Reactor Effluent 300/105F. Material 304L stainless steel tubes/CS shell. There are 325 tubes sized 5/8" OD with 0.065" wall, Physical size 25" dia x 20 ft. Manufactured by Heat Exchanger Design (HED) in 2009. Physical weight 16,620 pounds. Ran 42 days - like new. We have U-1A - see Links. (Part of module fp413)
Asset ID: 41-E-112
Available: 1
Heat Exchanger, Shell & Tube 2151sf
Heat exchanger shell & tube TEMA AEU design. U-tube type, Heat transfer area 2151 sq ft, ASME MAWP tubes 1650 psig/FV at 385F, shell 150 psig at 250F. Nat'l Bd # 2932, serial# 4017C. Rated for 98 MMBTU/hr, Water 90/110F, Reactor Effluent 300/105F. Material 304L stainless steel tubes/CS shell....
Heat Exchanger, Shell & Tube ss 102sf
Asset ID: 8138
Available: 1
Paul Mueller Company Heat Exchange Tube. Stainless steel shell and tubes ss304. Brand NEW - never used, stored in warehouse. Style TEMA BEM. Size 6-5/8" OD x 247" OAL. (6" ID x 240" tube length). Built 2006. ASME Nat'l Bd # 42489, S/N 357149-16. MAWP shell 125 psi @ 600F, tubes 150 psi @ 400F. NEW. 26 Tubes at 0.75" OD x 240" for 102 sf heat exchange surface area. Inlet/Outlet flange connections all are 2". Empty weight: 607 pounds.
Asset ID: 8138
Available: 1
Heat Exchanger, Shell & Tube ss 102sf
Paul Mueller Company Heat Exchange Tube. Stainless steel shell and tubes ss304. Brand NEW - never used, stored in warehouse. Style TEMA BEM. Size 6-5/8" OD x 247" OAL. (6" ID x 240" tube length). Built 2006. ASME Nat'l Bd # 42489, S/N 357149-16....
Heat Exchanger
Asset ID: H-707
Available: 1
Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 75 psi @ 250F, Tubes 50 psi @ 250F, MDMT Shell - 20 F @ 100F, Tubes -20 @ 50F, S/N 4024-5, VS34CU2-180H
Asset ID: H-707
Available: 1
Heat Exchanger
Rubicon Heat exchanger condenser, Shell & Tube, SS304, Rubicon MAWP Shell 75 psi @ 250F, Tubes 50 psi @ 250F, MDMT Shell - 20 F @ 100F, Tubes -20 @ 50F, S/N 4024-5, VS34CU2-180H
Heat Exchanger Plates (49)
Asset ID: X-400P
Available: 49
Approx 49 plates for Alfa Laval plate heat exchanger Model FC-500-WTFE - priced for the lot
Asset ID: X-400P
Available: 49
Heat Exchanger Plates (49)
Approx 49 plates for Alfa Laval plate heat exchanger Model FC-500-WTFE - priced for the lot
Heat Exchanger
Asset ID: H-804
Available: 1
Rubicon Heat exchanger, MAWP Shell 125 psi @ 700F, Tubes 75 psi @ 500F, MDMT -20F @ 125 psi, Tubes -20F @ 75 psi, S/N 4024-1, Model WC10B1-168HE
Asset ID: H-804
Available: 1
Heat Exchanger
Rubicon Heat exchanger, MAWP Shell 125 psi @ 700F, Tubes 75 psi @ 500F, MDMT -20F @ 125 psi, Tubes -20F @ 75 psi, S/N 4024-1, Model WC10B1-168HE
Condenser 5088sf
Asset ID: 8067
Available: 1
Crown Iron Works condenser, NEW, Old Stock. Surface area 5088 sq ft (473 sq m) with (1080) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long ss304 stainless steel tubes rated 45 psi (3.1 bar) design pressure. Carbon steel shell 40 inch (1016 mm) diameter x 24 ft (7315 mm) long rated +/-1 psi (-0.06/0.06 bar) design pressure. New 2004. Was used as Desolventizer Toaster condenser.
Asset ID: 8067
Available: 1
Condenser 5088sf
Crown Iron Works condenser, NEW, Old Stock. Surface area 5088 sq ft (473 sq m) with (1080) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long ss304 stainless steel tubes rated 45 psi (3.1 bar) design pressure....
Heat Exchanger, Plate
Asset ID: 2368
Available: 1
New Alfa Laval TS20M plate & frame heat exchanger with 72 plates.
Asset ID: 2368
Available: 1
Heat Exchanger, Plate
New Alfa Laval TS20M plate & frame heat exchanger with 72 plates.
Heat Exchanger
Asset ID: H-1002
Available: 1
Mason heat exchanger 1835 sq ft area, MAWP Shell: 130 psi @ 600F, Tubes: 75 psi @ 600F, MDMT Shell: -20 @ 75 psi, Tubes: -20F @ 75 psi, S/N 17-6809
Asset ID: H-1002
Available: 1
Heat Exchanger
Mason heat exchanger 1835 sq ft area, MAWP Shell: 130 psi @ 600F, Tubes: 75 psi @ 600F, MDMT Shell: -20 @ 75 psi, Tubes: -20F @ 75 psi, S/N 17-6809
Reboiler Heat Exchanger
Asset ID: H-105
Available: 1
Heat Exchanger 10.75 diameter x 71 7/8 inches, 100 sqft area, Rubicon Model VT10B2-72VE, S/N 4021-1, Shell MAWP 150 psi @ 450F, MDMT -20F @ 150 psi,Tubes 150 psi @ 350F, -20F @ 150 psi
Asset ID: H-105
Available: 1
Reboiler Heat Exchanger
Heat Exchanger 10.75 diameter x 71 7/8 inches, 100 sqft area, Rubicon Model VT10B2-72VE, S/N 4021-1, Shell MAWP 150 psi @ 450F, MDMT -20F @ 150 psi,Tubes 150 psi @ 350F, -20F @ 150 psi
Heat Exchanger
Asset ID: H-311
Available: 1
API Basco heat exchanger 12 x 312 AW Hairpin (stacked) P/N 1470-12-312-000, S/N E140279-601. MAWP Shell 110 psi @ 650F, Tubes 3320 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3320 psi. 98 inch OAH, 343.88 inch OAL, 57.63 inch OAW
Asset ID: H-311
Available: 1
Heat Exchanger
API Basco heat exchanger 12 x 312 AW Hairpin (stacked) P/N 1470-12-312-000, S/N E140279-601. MAWP Shell 110 psi @ 650F, Tubes 3320 psi @ 690F, MDMT Shell -20F @ 110 psi, Tubes -20F @ 3320 psi. 98 inch OAH, 343.88 inch OAL, 57.63 inch OAW
Heat Exchanger
Asset ID: H-211
Available: 1
Heat Exchanger by API Basco 10 x 312 AW Hairpin, P/N 1470-10-312-000. S/N E140279-301. Shell MAWP 110 psi @ 690F, Tubes 3320 psi @ 775F, Shell MDMT -20F@110 psi, Tubes -20F @ 3320 psi. Year 2014. 42 inch OAW, 57.25 OAH, 342 OAL, 1070 sq ft area
Asset ID: H-211
Available: 1
Heat Exchanger
Heat Exchanger by API Basco 10 x 312 AW Hairpin, P/N 1470-10-312-000. S/N E140279-301. Shell MAWP 110 psi @ 690F, Tubes 3320 psi @ 775F, Shell MDMT -20F@110 psi, Tubes -20F @ 3320 psi. Year 2014. 42 inch OAW, 57.25 OAH, 342 OAL, 1070 sq ft area
Heat Exchanger, Plate 880 sf
Asset ID: X-405
Available: 1
Alfa Laval Plate & Frame Heat Exchanger, Model EC-500-WTFE, sn 30105-54319. MAWP 55 psi at 302F, Nat'l Bd# 15636 Surface area 880.4 sf with (31) plates. Plates are 0.6 mm plates cassettes. Includes plates. Entire heat exchanger has been disassembled and repainted. Plates are stacked ready to ship.
Asset ID: X-405
Available: 1
Heat Exchanger, Plate 880 sf
Alfa Laval Plate & Frame Heat Exchanger, Model EC-500-WTFE, sn 30105-54319. MAWP 55 psi at 302F, Nat'l Bd# 15636 Surface area 880.4 sf with (31) plates. Plates are 0.6 mm plates cassettes. Includes plates. Entire heat exchanger has been disassembled and repainted....
Heat Exchanger, Shell & Tube 5861 sf
Asset ID: 31-E-188
Available: 1
Shell & tube heat exchanger, Heat transfer area 5,861 sq ft, Physical size 38" dia X 28 ft long. Material shell KCS (killed carbon steel)/ tubes carbon steel SA179. Rated at 450 psig 4.02 MMBTU/hr, HP Solvent 36/102, Lean Solvent 121/46F. TEMA type BFU, 2-pass shell side, 2-pass tube side. Manufactured by Heat Exchanger Design in 2009 - ran only 42 days - like new. ASME MAWP 450/FV at 350F, Nat'l Bd# 2891, s/n 4015. Has (611) 3/4" tubes. We have drawings and U-1A - see Links. Used as Solvent / High Pressure Liquid Exchanger on fp311.