Drum filling line designed to fill 4 drums on a pallet. PLC
controlled pallet transfer system, room for 2 pallets staging, 1
pallet filling, and 3 full pallets. All automatic indexing. Filling
station sits on a load cell and automatically cuts off at a preset
weight. Fills one drum at a time, manually moved by operator. Has
Nicol scale system
Item
4503
.Filling Line, cube shortening - margarine
Complete
filling line for 25 to 50# boxes of shortening or margarine.
Includes case erector, bag inserter, dual head filler, hot melt case
sealer, Krones Cartina labeler, and Marsh case coder. Low level
palletizer and 20,000 #/hr Votator also available as option. Line
ran 15,000 pounds per hour shortening. Laid out in straight line
approx 85 feet long, but can be configured into a U design. For a
complete listing of components and their photos, enter cube1 in the
key word search box on web site www.s4mEquipment.com
Item
4507
.Filling Line, cube shortening -
margarine
Complete
filling line for 25 to 50# boxes of shortening or margarine.
Includes case erector, bag inserter, dual head filler, hot melt case
sealer, Krones Cartina labeler, and Marsh case coder. Low level
palletizer and 20,000 #/hr Votator also available as option. Laid
out in straight line approx 85 feet long, but can be configured into
a U design. Line ran 15,000 pounds per hour shortening. For a
complete listing of components and their photos, enter cube2 in the
key word search box on web site www.s4mEquipment.com
Item
4490 .Flake
Roll
Flake Roll. Drum is 4 ft dia x 9 ft long. Last used for
flaking shortening - used until September 2006. Still installed. No
pits in flaking roll - very good condition. 9 liquid feed nozzles.
Includes roll, motor and gear/chain drive, platform and stairs,
Durco feed pump (see item 4491), Central brand top taper (see item
4492), Toledo scale, and all controls and electrical panels. Overall
platform size is 20 ft x 10 ft on 7 ft legs. Enter flake
in key word search box on s4mEquipment.com for a list and photos of
components
Item
4450 50
pound Filling Line, cube shortening - margarine
(located in Denver,
CO)
Complete shortening filling line designed for bulk boxes from 25
pound to 50 pounds. Includes (2) Votator A and B units, (2)
stainless steel blend tanks, a dual head Toledo electronic scale
filling head system, in-line metal detector, case erector, bag
inserter, bag closer, case sealer, and all interconnecting conveyor.
For a listing of all components on this line, enter denver50 in the
search terms box.
Item
4519
.Palletizer, low level
Kinetic
Systems Palletizer, low level. Model PD-TT. Built in 1986. Has
pallet de-stacker, and automatic discharge, 2 pallet spaces.
Controls are plc, TI-5. On line 2
Item
4518
.Palletizer, low level
Kinetic
Systems Palletizer, low level. Model PD-TT, serial 00-0-RS-86-0071.
Built in 1986. Has pallet de-stacker, and automatic discharge, 2
pallet spaces. Controls are plc, TI-5. On line 1
Item
4195
.Palletizer
(located in
Jacksonville, IL)
Currie
Palletizer with decking and stairs. Rated up to 8,000 cases/shift.
Ran at 4,500 cases/shift. Serial LSP 5 882. Model 18340. Good
Condition. Physical size is approx 20 feet long by 16.5 feet wide.
Outfeed has space for 2 pallets. Includes pallet de-stacker for
pallet infeed. Has auto tier sheet feeder
Item
4525
.Votator 20,000 pounds/hr
Votator
Model LS364, serial 81306VA. Built 1982. Capacity 20,000 #/hr. Total
unit has (4) A units 6x72 and (1) B unit 16x48, with pre-cooler heat
exchanger, and a double shaft motor driving (2) pumps. Uses direct
expansion ammonia for cooling, 60 tons NH3 cooling (100 tons). .
There are (2) ammonia systems - one set for (2) A units. Ammonia
units are all inclusive with solenoid valves, surge tanks, expansion
valves, and manual valves. Belt and chain driven by one motor. Unit
is still installed, and was running until August 2006. This system
is complete. (#1 line)
Item
4524
.Votator 20,000 pounds/hr
Votator
Model LS364, capacity 20,000 #/hr. Built 1981. Serial number
80263VA. Capacity 20,000 #/hr. Total unit has (4) A units 6x72 and
(1) B unit 16x48, with pre-cooler heat exchanger, and a double shaft
motor driving (2) pumps. Uses direct expansion ammonia for cooling,
60 tons NH3 cooling (100 tons). There are (2) ammonia systems - one
set for (2) A units. Ammonia units are all inclusive with solenoid
valves, surge tanks, expansion valves, and manual valves. Belt and
chain driven by one motor. Unit is still installed, and was running
until August 2006. This system is missing the B unit. (#2 line)
Item
4457
.Votator - A & B unit (Two Votators)
Two Votator
crystallizing units with (3) A tubes and (1) B unit each in one
stainless steel housing unit. Model M-123-A. A tubes are 4x48
horizontal. B Unit is one tube 4x48. Includes 6x18 pre-cooler heat
exchanger and pressure pump (foreground of picture). Unit is cooled
with ammonia, and all ammonia piping, expansion and solenoid valves,
and accumulator tanks are included. Units were run until March 2006
- still installed.
Item 4521 .Scraped wall heat exchanger
Chemtech scraped wall heat exchanger - A
unit. Model WL105F, serial CC-9911-03. Built 2000. All stainless
steel. Gear drive, belt driven. Mutator shaft is 6 inches x 6 ft.
Overall diameter is 12 inches. Ammonia cooled. Used as crystallizer
for shortening
Item 4502 .Bag Inserter
Bemis bag inserter, automatic. Model
1575-136D, serial number 103-0394. Includes Bemis case conveyor
Model L570B48. Rebuilt in 2002. Was used to insert bags into 25 and
50# cube margarine and shortening boxes. (Margarine Line)
Item 4501 .Case Erector
ABC Case Erector, Model 100, serial
K20923. Used for 25 to 50 pound boxes of margarine or shortening.
(Margarine Line)
